APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-15A USERS MANUAL Section 2.1033(C)(3) Alcatel-Lucent Use pursuant to Company Instructions APPLICANT: Alcatel-Lucent FCC ID: AS5BBTRX-15A USERS MANUAL SECTION 2.1033(c) (3) A copy of the installation and operating instructions to be furnished the user. A draft copy of the instructions may be submitted if the actual document is not available. The actual document shall be furnished to FCC when it becomes available. RESPONSE:
A copy of B41 RRH8x20-B User Manual is attached Alcatel-Lucent Use pursuant to Company Instructions Alcatel-Lucent B41 RRH8x20-B User Manual _________________________________________________________________________________________ Document Number:
Document Issue:
Document Status:
Date of Issue:
_________________________________________________________________________________________ TDD-LTE 01.00/ EN Standard 06/Dec/2013 B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 Copyright 2010 by Alcatel-Lucent Technologies. All Rights Reserved. About Alcatel-Lucent Alcatel-Lucent (Euronext Paris and NYSE: ALU) provides solutions that enable service providers, enterprises and governments worldwide, to deliver voice, data and video communication services to end-users. As a leader in fixed, mobile and converged broadband networking, IP technologies, applications, and services, Alcatel-Lucent offers the end-to-end solutions that enable compelling communications services for people at home, at work and on the move. For more information, visit Alcatel-Lucent on the Internet: www.alcatel-lucent.com Notice The information contained in this document is subject to change without notice. At the time of publication, it reflects the latest information on Alcatel-Lucents offer, however, our policy of continuing development may result in improvement or change to the specifications described. Trademarks The following trademarks are used throughout this document:
Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcatel and Lucent Technologies. Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
2 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 CONTENTS 1 2 3 4 5 3.2.1 INTRODUCTION .................................................................................................. 5 1.1 OVERVIEW .......................................................................................................5 1.2 SCOPE OF THIS DOCUMENT .......................................................................................5 B41 RRH8x20-B SOLUTION OVERVIEW ..................................................................... 6 2.1 OVERVIEW .......................................................................................................6 B41 RRH8x20-B PRODUCT DESCRIPTION .................................................................. 8 3.1 OVERVIEW .......................................................................................................8 3.2 MAIN CHARACTERISTICS AND TECHNICAL DATA ....................................................................9 Connectivity and Interfaces ........................................................................9 3.3 MECHANICAL CHARACTERISTICS ................................................................................ 10 Mechanical mounting solutions .................................................................. 10 3.3.1 3.3.2 Solar shield ......................................................................................... 11 ENVIRONMENTAL AND REGULATORY COMPLIANCE ..................................................... 13 ENVIRONMENTAL COMPLIANCE .................................................................................. 13 Operation Temperature and Humidity ......................................................... 13 Storage .............................................................................................. 13 Transportation ..................................................................................... 13 REGULATORY COMPLIANCE ..................................................................................... 13 Safety ................................................................................................ 13 4.2.1 EMC ................................................................................................... 14 4.2.2 4.2.3 Eco-environmental compliancy .................................................................. 17 APPENDICES .................................................................................................... 18 APPENDIX A: PUBLICATION HISTORY ........................................................................... 18 APPENDIX C: GLOSSARY & ACRONYMS .......................................................................... 18 Glossary ............................................................................................. 18 Acronyms ............................................................................................ 18 4.1.1 4.1.2 4.1.3 5.2.1 5.2.2 5.1 5.2 4.2 4.1 Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
3 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 LIST OF FIGURES Figure 1 Alcatel-Lucent B41 RRH8x20-B Product ........................................................................... 6 Figure 2 B41 RRH8x20-B System Overview (Star Configuration Supported From BBU) .............................. 7 Figure 3 - B41 RRH8x20-B Functional Architecture .......................................................................... 8 Figure 4 -B41 RRH8x20-Bmounted on a pole ................................................................................ 10 Figure 5 -B41 RRH8x20-B with solar shield .................................................................................. 12 LIST OF TABLES Table 1 - B41 RRH8x20-B Main Characteristics ............................................................................... 9 Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
4 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 INTRODUCTION 1 1.1 Overview This document provides an overview and describes the characteristics of the TD-LTE Remote Radio Head B41 RRH8x20-B using 3GPP bands 41 (working band 2496 up to 2690MHz). The content of this document is not a commitment from Alcatel-Lucent. Alcatel-Lucent reserves the right to change the technical specifications without notice until General Availability of the product. For more information on features availability, please refer to the Product Bulletins, Feature Planning Guides, Baseline and Release Notes. 1.2 Scope of this Document The scope of this document is the Product Description for Alcatel-Lucent TD-RRH8X20W 2500MHz Other RRH products are available from Alcatel-Lucents portfolio. In addition, there will further extensions to the portfolio in future releases. Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
5 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 B41 RRH8x20-B SOLUTION OVERVIEW 2 2.1 Overview The Alcatel-Lucent distributed solution is composed of two main parts:
The Alcatel-Lucent Base Band Unit The Alcatel-Lucent B41 RRH8x20-B, located locally or on a remote site: B41 RRH8x20-B provides the RF transceiver, PA and filter functions typically found in the conventional Node B. Figure 1 Alcatel-Lucent Product These two equipments are linked by optical fibres, carrying downlink and uplink base band digital signals along with OAM information. Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
6 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 Local Site Optical Interface BBU Optical fibre Remote Site RRH8x20-25 Figure 2 B41 RRH8x20-B System Overview
(Star Configuration Supported From BBU) Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
7 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 B41 RRH8x20-B PRODUCT DESCRIPTION 3 3.1 Overview The RRH includes:
Eight (8) 2500MHz transmit paths of up to 20W per path Eight (8) receive paths Eight (8) Broadband Power Amplifiers of 196MHz bandwidth each Three (3) fibre interfaces carrying downlink and uplink base band signals, as well as OAM information and timing signal An AISG controller supporting Remote Electrical Tilt via the calibration port (OOK signal) or the AISG port (RS485 signal) A PSU (power supply unit) converting the input voltage into the target voltage for the different internal units. Figure 3 - B41 RRH8x20-B Functional Architecture Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
8 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 3.2 Main Characteristics and Technical Data B41 RRH8x20-B main characteristics are summarized in the following table:
dimensions Sizes (HxWxD) Temperature range Environmental (Other) RF Characteristics RF output power @antenna port Working frequency band Supported antenna type Optical Characteristics Supported fibre type Electrical/Other Characteristics Power supply 645 x 445 x 145 mm
-40C to +55C Fan-free (natural convection cooling) Up to 20W at each antenna port 2496MHz to 2690MHz (194MHz bandwidth) 8 port dual polarization smart antenna Single mode dual fibres (SMDF) or Multi mode dual
-48V (-38V/-57V) Table 1 - B41 RRH8x20-B Main Characteristics 3.2.1 Connectivity and Interfaces The RRH provides the following external interfaces:
Three (3) optical CPRI links Eight (8) antenna ports One (1) antenna calibration port One (1) AISG port for RET support One (1) alarm port One (1) DC power input port Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
9 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 3.3 Mechanical Characteristics Mechanical mounting solutions 3.3.1 B41 RRH8x20-B can be either pole or wall mounted, using the appropriate mounting brackets:
these brackets are designed to be easily fitted before hanging and locking the RRH on to it. Figure 4 -B41 RRH8x20-B mounted on a pole Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
10 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 3.3.2 Grounding:
3.3.3 Solar shield B41 RRH8x20-B does not use any fan as natural convection cooling is employed. It is equipped with an aesthetic solar shield that may be removed, if desired, for indoor installation only. In case of outdoor installations, a solar shield is used. The cover is of low weight and easy to install. Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
11 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 Figure 5 -B41 RRH8x20-B with solar shield The solar shield is part of the thermal concept of the B41 RRH8x20-B, protecting the RRH against direct sun radiation. Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
12 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 4 ENVIRONMENTAL AND REGULATORY COMPLIANCE 4.1 Environmental Compliance 4.1.1 Operation Temperature and Humidity The following requirements for environmental conditions apply for the RRH:
RRH meets the requirements as specified in IEC 60721-3-4 Classification of Groups of Environmental Parameters and their Severities Stationary use at Non-weather protected locations Classes 4K2/4Z5/4Z7/4B1/4C2/4S2/4M5. 4.1.2 Storage RRH meets the requirements as specified IEC 60721-3-1 Classification of groups of environmental parameters and their severities Storage Classes 1K4/1Z2/1Z3/1Z5/1B2/1C2(1C1)/1S3/1M2 (Weather protected, not temperature controlled storage locations). 4.1.3 Transportation RRH meets the requirements as specified IEC 60721-3-2 Classification of groups of environmental parameters and their severities Transportation Classes 2K3/2B2/2C2/2S2/2M1 (Careful transportation). 4.2 Regulatory Compliance 4.2.1 Safety RRH meets Safety Regulatory standards IEC/EN60950-1 & IEC/EN 60950-22 or equivalent regulatory standards Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
13 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 4.2.2 EMC Introduction:
Product conformance statements The statements that follow are the product conformance statements that apply to the FDDRRH when deployed in Canada. Industry Canada:
ICES-003: Interference- Causing Equipment Standard Digital Apparatus This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada. ICCS-03: Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility This product meets the applicable Industry Canada technical specifications. RF approval:
RSS-132: Cellular Telephones Employing New Technologies Operating in the Bands 2496 -
2690MHz The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met. RSS-133: Broadband Radio Service (BRS) and the Educational Broadband Service (EBS) bands. The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
14 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 United States:
Introduction:
The statements that follow are the product conformance statements that apply to the TDRRH when deployed in the United States. Federal Communications Commission:
Important!
Changes or modifications not expressly approved by Alcatel-Lucent, Inc. could void the user's authority to operate the equipment. FCC Part 15:
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device meets FCC Part 15 Subpart B Class B requirements
. FCC Part15 Class A (as marketed) Important!
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's expense. FCC Part15 Class B (as marketed) Important!
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no to ccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
15 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 Consult the dealer or an experienced radio/TV technician for help. FCC Part 68:
Not applicable for this Device RF approval:
This equipment complies with Part 2, Sub part J-Equipment Authorization Procedures, of the FCC Rules. This equipment complies with Part 27-Broadband Radio Service (BRS) and the Educational Broadband Service (EBS) bands. Antenna exposure:
Antenna installations for the TDRRH shall be performed in accordance with all applicable manufacturer's recommendations, and national laws and regulations. To ensure correct antenna installation, the antenna installer shall perform all necessary calculations and/or field measurements to evaluate compliance with applicable national laws or regulations regarding exposure to electromagnetic fields. The supplier of radio equipment, the supplier of antenna equipment and the integrator and builder of the site must provide sufficient information so that the limits of the exclusion zones can be determined. Any changes to the antenna or other equipment in the transmit path may require re-evaluation of the exposures to electromagnetic fields. Pursuant to 47 CFR Part1, Subpart I, subject to the provisions of section 1.1307, all installations must be evaluated for requirements contained in Table 1, Limits for maximum permissible exposure, in section 1.1310. RRH meets the requirements as specified in:
EN 55022 / CISPR22, class B to fulfil Radiated Emissions (RE) requirement. EN 55022 / CISPR22, class B to fulfil Conducted Emissions (CE) requirement. IEC 61000-4-2 to fulfil Electrostatic Discharge (ESD) Immunity requirement EN61000-4-3/A1 to fulfil Immunity to RF EM field (enclosure port) requirement. IEC 61000-4-4 to fulfil Electrical Fast Transient (EFT) Immunity requirement. IEC 61000-4-6 to fulfil Conducted Immunity requirement. 3GPP TS 36.113 and ETSI EN 300 386 ETSI TS 136 113 for Radiated Immunity ETSI TS 136 113 for Conducted Immunity FCC Part 15 Subpart B Class B for Radiated Immunity GR-1089-CORE, Sections 3.2.2 and 3.2.3 for conducted spurious emissions GR-1089-CORE, Sections 2.1.2 for ESD immunity Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
16 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 4.2.3 Eco-environmental compliancy RRH complies with:
RoHS 6/6 (lead solder free), Restriction on the use of certain Hazardous Substances
(RoHS), Directive 2002/95/EC PBEMS-L4-01, titled Country-Specific Eco-Environmental Requirements Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
17 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 5 APPENDICES 5.1 Appendix A: Publication History 06/DEC/2013 Issue 01.00 / EN, Released 5.2 Appendix C: Glossary & Acronyms 5.2.1 Glossary Fibre link A fibre link is:
Either one physical fibre when Single-Mode optical propagation is used (using CWDM), Either a pair of fibres when Multi-Mode optical propagation is used: one fibre carries the downlink signal, the other one the uplink signals (Main and Diversity digital streams are multiplexed into a single HSSL stream). 5.2.2 Acronyms 1 - 10 3GPP Third Generation Partnership Project A - D AISG CWDM DL EMC FDD Antenna Interface Standard Group Coarse Wavelength Division Multiplexing Downlink Electro-Magnetic Compatibility Frequency Division Duplex Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
18 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 G - S HW IEC IP LTE MM RET RF RoHS RRH RX SFP SW Hardware International Electrotechnical Commission Ingress Protection Long Term Evolution Multi-Mode (fibre) Remote Electrical Tilt Radio Frequency Restriction of the use of certain Hazardous Substances Remote Radio Head Receiver/Receive Small Form-factor Pluggable Software Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
19 / 20 Document Status: Released B41 RRH8x20-B PRODUCT DESCRIPTION DEC 2013 T - W TX VSWR WEEE Transmitter/Transmit Voltage Standing Wave Ratio Waste of Electrical and Electronic Equipment Document Issue: V01/ EN Alcatel-Lucent Proprietary See Notice on Page 2
|
20 / 20 Document Status: Released