FCC ID: 2ADZR4G01C FastMile 4G Receiver

Nokia FastMile 4G Receiver Product Overview Nokia BBD Release 20.03a Nokia FastMile 4G Receiver Product Overview 3TG-01505-AAAB-TCZZA Issue: 01 November 2020 Nokia Proprietary and confidential Use pursuant to applicable agreements Nokia FastMile 4G Receiver Product Overview Nokia is committed to diversity and inclusion. We are continuously reviewing our customer documentation and consulting with standards bodies to ensure that terminology is inclusive and aligned with the industry. Our future customer documentation will be updated accordingly. Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners. The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein. 2020 Nokia. Contains proprietary/trade secret information which is the property of Nokia and must not be made available to, or copied or used by anyone outside Nokia without its written authorization. Not to be used or disclosed except in accordance with applicable agreements. 2 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Preface 1 Preface This preface provides general information about the Product Overview for the Nokia FastMile 4G Receiver. 1.1 Summary of document issue changes Changes between document issues are cumulative. Therefore, the latest document issue contains all changes made to previous issues. Issue 01: first issue of the document for this release of the FastMile 4G Receiver 1.2 Scope 1.3 Audience This document provides an overview of the Nokia FastMile 4G Receiver along with information about safety and troubleshooting the Nokia FastMile 4G Receiver. This document is intended for planners, administrators, operators, and maintenance personnel involved in installing, upgrading, or maintaining the Nokia FastMile 4G Receiver. 1.4 Required knowledge The reader must be familiar with general telecommunications principles. 1.5 Acronyms and initialisms The expansions and optional descriptions of most acronyms and initialisms used in this document appear in the glossary at the back of the document. 1.6 Assistance and ordering phone numbers Nokia provides global technical support through the following URL:

https://customer.nokia.com/support/s/. For ordering information, contact your Nokia sales representative. Issue: 01 3TG-01505-AAAB-TCZZA 3 Preface Nokia FastMile 4G Receiver Product Overview 1.7 Nokia quality processes Nokias FastMile 4G Receiver quality practices are in compliance with TL 9000 requirements.These requirements are documented in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations. 1.8 Safety information For safety information, see the appropriate safety guideline chapters. 1.9 Documents Documents are available at the Nokia Documentation Center. Procedure 1 To access a document on the Nokia Documentation Center Individual PDFs of customer documents are accessible through the Nokia Documentation Center. 1 Go to https://documentation.nokia.com Log in as required. Enter FastMile 4G Receiver in the Product box. 2 3 4 Click on the PDF icon to access a document. Select the search criteria as needed (Release, Content Type, Sort by, etc.) and Click on Search. 4 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Preface 1.10 Special information The following are examples of how special information is presented in this document. Danger Danger indicates that the described activity or situation may result in serious personal injury or death; for example, high voltage or electric shock hazards. Warning Warning indicates that the described activity or situation may, or will, cause equipment damage or serious performance problems. Caution Caution indicates that the described activity or situation may, or will, cause service interruption. Note A note provides information that is, or may be, of special interest. 1.10.1 Steps with options or substeps When there are options in a step, they are identified by letters. When there are required substeps in a step, they are identified by roman numerals. Procedure 2 Example of options in a step At step 1, you must choose option a or b. 1 This step offers two options. You must choose one of the following:

a b This is one option. This is another option. 2 You must perform this step. Issue: 01 3TG-01505-AAAB-TCZZA 5 Preface Nokia FastMile 4G Receiver Product Overview Procedure 3 Example of required substeps in a step At step 1, you must perform a series of substeps within the step. 1 This step has a series of substeps that you must perform to complete the step. You must perform the following substeps:

i ii This is the first substep. This is the second substep. iii This is the third substep. 2 You must perform this step. 1.11 Multiple PDF document search You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file. Note The PDF files in which you search must be in the same folder. Procedure 4 To search multiple PDF files for a common term Open Adobe Acrobat Reader. Choose EditSearch from the Acrobat Reader main menu. The Search PDF panel appears. 1 2 3 4 5 6 Enter the search criteria. Click on the All PDF Documents In radio button. Select the folder in which to search using the drop-down menu. Click on the Search button. 6 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Preface Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol. Issue: 01 3TG-01505-AAAB-TCZZA 7 Preface Nokia FastMile 4G Receiver Product Overview 8 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Table of contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.10.1 1.11 2 2.1 2.1.1 2.1.2 2.1.2.1 2.1.2.2 2.2 2.3 2.3.1 2.3.2 2.3.3 2.3.4 2.3.5 2.3.6 2.3.7 2.4 3 3.1 3.1.1 3.1.2 3.2 3.2.1 3.2.2 3.2.3 3.2.4 3.3 3.3.1 3.3.2 3.3.3 3.4 Preface.............................................................................................3 Summary of document issue changes ........................................................3 Scope ..........................................................................................................3 Audience......................................................................................................3 Required knowledge....................................................................................3 Acronyms and initialisms .............................................................................3 Assistance and ordering phone numbers ....................................................3 Nokia quality processes...............................................................................4 Safety information........................................................................................4 Documents ..................................................................................................4 Special information ......................................................................................5 Steps with options or substeps....................................................................5 Multiple PDF document search ...................................................................6 ETSI environmental and CRoHS guidelines...............................19 Environmental labels .................................................................................19 Overview....................................................................................................19 Environmental related labels .....................................................................19 Products below Maximum Concentration Value (MCV) label....................19 Products containing hazardous substances above Maximum Concentration Value (MCV) label ..............................................................20 Hazardous Substances Table (HST).........................................................21 Other environmental requirements ............................................................21 Environmental requirements......................................................................22 Storage ......................................................................................................22 Transportation ...........................................................................................22 Stationary use............................................................................................22 Thermal limitations ....................................................................................22 Material content compliance......................................................................23 End-of-life collection and treatment ...........................................................23 Additional information ................................................................................24 ETSI safety guidelines..................................................................25 Safety instructions .....................................................................................25 Safety instruction boxes ............................................................................25 Safety-related labels..................................................................................26 Safety standards compliance ....................................................................26 EMC compliance .......................................................................................27 Equipment safety standard compliance.....................................................27 Environmental standard compliance .........................................................27 Laser product standard compliance ..........................................................27 Electrical safety guidelines ........................................................................28 Power supplies ..........................................................................................28 Cabling ......................................................................................................28 Protective earth .........................................................................................28 ESD safety guidelines ...............................................................................29 Issue: 01 3TG-01505-AAAB-TCZZA 9 Nokia FastMile 4G Receiver Product Overview Environmental requirements......................................................................29 Additional information ................................................................................29 ANSI safety guidelines .................................................................31 Safety instructions .....................................................................................31 Safety instruction boxes in customer documentation ................................31 Safety-related labels..................................................................................32 Safety standards compliance ....................................................................33 EMC, EMI, and ESD compliance...............................................................34 Equipment safety standard compliance.....................................................34 Electrical safety guidelines ........................................................................35 Power supplies ..........................................................................................35 Cabling ......................................................................................................35 Protective earth .........................................................................................35 ESD safety guidelines ...............................................................................36 Environmental requirements......................................................................36 Additional information ................................................................................36 Product overview..........................................................................37 Overview of the Nokia FastMile 4G Receiver............................................37 End-to-end example .................................................................................39 Installing the Nokia FastMile 4G Receiver.................................................40 Functional overview .....................................................................41 Overview....................................................................................................41 Nokia Wireless app....................................................................................41 Web UI.......................................................................................................42 Remote management ................................................................................43 LTE characteristics ....................................................................................43 Data forwarding ........................................................................................44 Ethernet characteristics .............................................................................44 Power supply characteristics .....................................................................45 Remote management protocols ................................................................45 Model overview .............................................................................49 Models of the Nokia FastMile 4G Receiver ...............................................49 Label information .......................................................................................51 Physical interfaces .......................................................................53 Physical interfaces of the Compact mono-band and ABA models ............53 Physical interfaces of the Compact multi-band models.............................54 Physical interfaces of the High gain CBRS model.....................................57 SIM cards.......................................................................................61 SIM card information for the Compact mono-band and ABA models........61 SIM card information for the Compact multi-band models ........................62 SIM card information for the High gain CBRS model ................................62 LEDs...............................................................................................65 Status LED ................................................................................................65 Signal strength LEDs ................................................................................67 Signal strength LEDs on the Compact multi-band models .......................67 Signal strength LEDs on the High gain CBRS model................................69 3.5 3.6 4 4.1 4.1.1 4.1.2 4.2 4.2.1 4.2.2 4.3 4.3.1 4.3.2 4.3.3 4.4 4.5 4.6 5 5.1 5.2 5.3 6 6.1 6.1.1 6.1.2 6.1.3 6.2 6.3 6.4 6.5 6.6 7 7.1 7.1.1 8 8.1 8.2 8.3 9 9.1 9.2 9.3 10 10.1 10.2 10.2.1 10.2.2 10 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview 11 11.1 11.2 12 12.1 12.2 12.3 12.4 13 13.1 13.2 13.3 14 14.1 14.2 14.3 14.4 14.5 15 15.1 16 16.1 17 17.1 18 18.1 18.2 18.3 19 Power information ........................................................................71 Power information for the Nokia FastMile 4G Receiver ............................71 Available PoE injectors..............................................................................71 Performance information .............................................................75 Performance overview...............................................................................75 Throughput information .............................................................................75 Carrier aggregation information.................................................................76 Power consumption information ................................................................91 Management using the Nokia Wireless app ...............................93 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver ...................................................................................................93 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller ...........................................................96 Using the Nokia Wireless app to manage a unit managed by an ACS .........................................................................................................114 Management using the Web UI..................................................135 Using the Web UI to manage the Nokia FastMile 4G Receiver...............135 Using the Web UI status screen ..............................................................136 Using the Web UI network screen ...........................................................142 Using the Web UI CBRS screen..............................................................151 Using the Web UI system screen ............................................................152 Standards certification...............................................................159 Standards certification for the Nokia FastMile 4G Receiver ....................159 Appendix A: Specifications .......................................................161 Specifications ..........................................................................................161 Appendix B: RF exposure ..........................................................163 RF exposure ............................................................................................163 Appendix C: FCC statements and label instructions ..............165 FCC compliance statement .....................................................................165 FCC radiation exposure statement..........................................................165 FCC label instructions .............................................................................166 Glossary ......................................................................................167 Issue: 01 3TG-01505-AAAB-TCZZA 11 Nokia FastMile 4G Receiver Product Overview 12 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview List of figures 2 Figure 1 Figure 2 Figure 3 4 Figure 4 Figure 5 5 Figure 6 Figure 7 Figure 8 6 Figure 9 Figure 10 8 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 9 Figure 16 Figure 17 Figure 18 10 Figure 19 Figure 20 Figure 21 Figure 22 ETSI environmental and CRoHS guidelines...............................19 Products below MCV value label...............................................................20 Products above MCV value label ..............................................................21 Recycling/take back/disposal of product symbol .......................................23 ANSI safety guidelines .................................................................31 Sample safety label for FCC......................................................................33 Sample safety label for ETL ......................................................................33 Product overview..........................................................................37 Application example of the Nokia FastMile 4G Receiver...........................38 Examples of model types of the Nokia FastMile 4G Receiver...................39 End-to-end example featuring the Nokia FastMile 4G Receiver with a residential gateway and PoE injector .....................................................40 Functional overview .....................................................................41 Remote management of the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller ....................................................46 Remote management of the Nokia FastMile 4G Receiver through an ACS ......................................................................................................47 Physical interfaces .......................................................................53 Location of physical interfaces on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver ...............................................54 Location of the ground point for the Compact multi-band models of the Nokia FastMile 4G Receiver................................................................56 Location of physical interfaces on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver .............................56 Location of the ground point for High gain CBRS model of the Nokia FastMile 4G Receiver ................................................................................58 Location of physical interfaces on the underside of the High gain CBRS model type of the Nokia FastMile 4G Receiver ..............................59 SIM cards.......................................................................................61 Detailed view of SIM card slot on the Compact mono-band and ABA models...............................................................................................61 Detailed view of SIM card slot on the Compact multi-band models ..........62 Detailed view of SIM card slot on the High gain CBRS model .................63 LEDs...............................................................................................65 Location of the status LED on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver ...............................................65 Location of the status LED on the Compact multi-band models of the Nokia FastMile 4G Receiver................................................................65 Location of the status LED on the High gain CBRS model of the Nokia FastMile 4G Receiver......................................................................66 Location of the signal strength LEDs on the Compact multi-band models .......................................................................................................67 Issue: 01 3TG-01505-AAAB-TCZZA 13 Nokia FastMile 4G Receiver Product Overview Location of the measurement button on the Compact multi-band models .......................................................................................................68 Location of the signal strength LEDs on the High gain CBRS model........69 Location of the measurement button on the High gain CBRS model ........69 Power information ........................................................................71 PoE injectors available from Nokia............................................................74 Management using the Nokia Wireless app ...............................93 Before we begin screen.............................................................................94 Terms of Service screen............................................................................95 Introductory screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF.....................................................97 Screen with prompt to scan the QR code for unit managed by the Nokia Altiplano FastMile Controller through NETCONF............................98 QR code screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF ...................................................................99 Screen showing the Already Installed option for unit managed by the Nokia Altiplano FastMile Controller through NETCONF....................100 Screen for connecting to the Nokia FastMile 4G Receiver......................101 Screen for enabling the VPN profile ........................................................102 Prompt for accepting the connection request ..........................................103 Screen to log in to a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller .........................................................104 System state screen example for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller...............................106 System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller . 107 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller . 108 Screen that lists the CA certificates for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ...............109 Screen indicating that uploading of the CA certificates was successful for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ..................................................................................110 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller..........111 Screen showing the reboot message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ...............112 Screen showing the Perform Factory Reset option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller . 113 Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ...............114 Introductory screen for unit managed by an ACS through TR-069 .........116 Screen with prompt to scan the QR code for unit managed by an ACS through TR-069 ...............................................................................117 QR code screen for unit managed by an ACS through TR-069 ..............118 Figure 23 Figure 24 Figure 25 11 Figure 26 13 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35 Figure 36 Figure 37 Figure 38 Figure 39 Figure 40 Figure 41 Figure 42 Figure 43 Figure 44 Figure 45 Figure 46 Figure 47 Figure 48 14 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Figure 49 Figure 50 Figure 51 Figure 52 Figure 53 Figure 54 Figure 55 Figure 56 Figure 57 Figure 58 Figure 59 Figure 60 Figure 61 Figure 62 14 Figure 63 Figure 64 Figure 65 Figure 66 Figure 67 Figure 68 Figure 69 Figure 70 Figure 71 Figure 72 Figure 73 Figure 74 Figure 75 Figure 76 Screen showing the Already Installed option for unit managed by an ACS through TR-069 ..........................................................................119 Screen for connecting to the Nokia FastMile 4G Receiver......................120 Screen for enabling the VPN profile ........................................................121 Prompt for accepting the connection request ..........................................122 Screen to log in to a Nokia FastMile 4G Receiver managed by an ACS through TR-069 ...............................................................................123 System state screen example for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 .....................................................125 System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by an ACS through TR-069..................126 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by an ACS through TR-069..................127 Upload CA Certificates screen for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 .....................................................128 List of CA certificates displayed on the Upload CA Certificates screen for a Nokia FastMile 4G Receiver managed by an ACS through TR-069.....................................................................................................129 Screen showing that upload of CA certificates was successful for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 .......131 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 ................................132 Screen showing the Perform Factory Reset option for a Nokia FastMile 4G Receiver managed by ACS through TR-069.......................133 Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by ACS through TR-069 ...........................................134 Management using the Web UI..................................................135 Example of the top part of the Status screen when the FastMile 4G Receiver is not connected to a cell..........................................................137 Example of the lower part of the Status screen without available cells when the FastMile 4G Receiver is not connected to a cell..............138 Example of the lower part of the Status screen with available cells when the FastMile 4G Receiver is not connected to a cell......................138 Example of the top part of the Status screen when the FastMile 4G Receiver is connected to a cell................................................................139 Example of a lower part of the Status screen when the FastMile 4G Receiver is connected to a cell................................................................139 Example of the Trigger Measurement pop up window ............................140 Example of ongoing Trigger Measurement .............................................140 Example of Trigger Measurement completed and FastMile 4G Receiver is detached ...............................................................................141 Example of Trigger Measurement completed and FastMile 4G Receiver is reattached.............................................................................141 Example of the lowest part of the Status screen when the FastMile 4G Receiver is connected to a cell ..........................................................141 Example of the Login screen ...................................................................143 Example of the Network screen...............................................................144 Example of scroll down for the Network screen ......................................144 Example of the Add Access Point window ..............................................145 Issue: 01 3TG-01505-AAAB-TCZZA 15 Nokia FastMile 4G Receiver Product Overview Figure 77 Figure 78 Figure 79 Figure 80 Figure 81 Figure 82 Figure 83 Figure 84 Figure 85 Figure 86 Figure 87 Figure 88 Figure 89 Figure 90 Figure 91 Figure 92 Example of the Delete Access Point window ..........................................146 Example of the Edit Location window......................................................147 Example of the Edit Controller window....................................................147 Example of the Edit Connection Request window...................................148 Example of the Edit DHCP window .........................................................149 Example of the Certificates information window......................................150 Example of the Add Cell window .............................................................150 Example of the Delete Cell window .........................................................151 Example of the Web UI CBRS screen with no CBSD Grants..................152 Example of the Web UI CBRS screen with three CBSD Grants .............152 Example of the System screen................................................................153 Example of the Restart Device confirmation window ..............................154 Example of the Restore Device confirmation window .............................155 Example of the screen that displays while firmware is being uploaded..................................................................................................156 Example of the screen that displays while firmware is being upgraded .................................................................................................157 Example of the screen that displays while the system is being rebooted ..................................................................................................158 16 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview List of tables 3 Table 1 4 Table 2 6 Table 3 Table 4 7 Table 5 Table 6 8 Table 7 Table 8 Table 9 10 Table 10 Table 11 Table 12 Table 13 11 Table 14 Table 15 Table 16 12 Table 17 Table 18 Table 19 Table 20 Table 21 Table 22 ETSI safety guidelines..................................................................25 Safety labels ..............................................................................................26 ANSI safety guidelines .................................................................31 Safety labels ..............................................................................................32 Functional overview .....................................................................41 E-UTRA bands supported by the Nokia FastMile 4G Receiver.................43 Data forwarding methods supported by the Nokia FastMile 4G Receiver ....................................................................................................44 Model overview .............................................................................49 Models of the Nokia FastMile 4G Receiver ...............................................49 Label information for the Nokia FastMile 4G Receiver ..............................51 Physical interfaces .......................................................................53 Physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver................................................................53 Physical interfaces of the Compact multi-band models of the Nokia FastMile 4G Receiver ................................................................................54 Physical interfaces of the High gain CBRS model of the Nokia FastMile 4G Receiver ................................................................................57 LEDs...............................................................................................65 Status LED behavior for Nokia FastMile 4G Receiver managed from the Nokia Altiplano FastMile Controller .............................................66 Status LED behavior for Nokia FastMile 4G Receiver managed from an ACS ......................................................................................................67 Signal strength LED threshold values .......................................................68 Signal strength LED threshold values .......................................................70 Power information ........................................................................71 Available PoE injectors for Model 4G17-A ................................................72 Available PoE injectors for models other than Model 4G17-A...................73 LED information for PoE injectors available from Nokia............................74 Performance information .............................................................75 LTE throughput information .......................................................................75 Carrier aggregation support for Model 4G01-A and Model 4G01-B

(2*2 MIMO downlink with SISO uplink)......................................................77 Carrier aggregation support for Model 4G01-C (2*2 MIMO downlink with SISO uplink) .......................................................................................79 Carrier aggregation support for Model 4G02-A (2*2 MIMO downlink with SISO uplink) .......................................................................................80 Carrier aggregation support for Model 4G03-A (2*2 MIMO downlink with SISO uplink) .......................................................................................80 Carrier aggregation support for Model 4G04-A (2*2 MIMO downlink with SISO uplink) .......................................................................................82 Issue: 01 3TG-01505-AAAB-TCZZA 17 Nokia FastMile 4G Receiver Product Overview Table 23 Table 24 Table 25 Table 26 15 Table 27 16 Table 28 17 Table 29 18 Table 30 Carrier aggregation support for Model 4G05-A and Model 4G05-B

(2*2 MIMO downlink) .................................................................................83 Carrier aggregation support for Model 4G06-A (2*2 MIMO downlink) ...................................................................................................86 Carrier aggregation support for Model 4G17-A (2*2 MIMO downlink with SISO uplink) .......................................................................................90 Power consumption information for all models..........................................92 Standards certification...............................................................159 Standards certifications for the Nokia FastMile 4G Receiver ..................159 Appendix A: Specifications .......................................................161 Specifications for the Nokia FastMile 4G Receiver .................................161 Appendix B: RF exposure ..........................................................163 RF exposure distances............................................................................163 Appendix C: FCC statements and label instructions ..............165 FCC ID for applicable models of the Nokia FastMile 4G Receiver..........165 18 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines 2 ETSI environmental and CRoHS guidelines This chapter provides information about the ETSI environmental China Restriction of Hazardous Substances (CRoHS) regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment. This chapter also includes environmental operation parameters of general interest. 2.1 Environmental labels This section describes the environmental instructions that are provided with the customer documentation, equipment, and location where the equipment resides. 2.1.1 Overview CRoHS is applicable to Electronic Information Products (EIP) manufactured or sold and imported in the territory of the mainland of the Peoples Republic of China. EIP refers to products and their accessories manufactured by using electronic information technology, including electronic communications products and such subcomponents as batteries and cables. 2.1.2 Environmental related labels Environmental labels are located on appropriate equipment. The following are sample labels. 2.1.2.1 Products below Maximum Concentration Value

(MCV) label Figure 1 shows the label that indicates a product is below the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). Products with this label are recyclable. The label may be found in this documentation or on the product. Issue: 01 3TG-01505-AAAB-TCZZA 19 ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview Figure 1 Products below MCV value label 18986 2.1.2.2 Products containing hazardous substances above Maximum Concentration Value (MCV) label Figure 2 shows the label that indicates a product is above the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). The number contained inside the label indicates the Environment-Friendly User Period (EFUP) value. The label may be found in this documentation or on the product. 20 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines Figure 2 Products above MCV value label 18985 Together with major international telecommunications equipment companies, Nokia has determined it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of 20 years for handsets and accessories. These values are based on manufacturers' extensive practical experience of the design, manufacturing, maintenance, usage conditions, operating environments, and physical condition of infrastructure and handsets after years of service. The values reflect minimum values and refer to products operated according to the intended use conditions. See Hazardous Substances Table (HST) for more information. 2.2 Hazardous Substances Table (HST) This section describes the compliance of the Nokia FastMile 4G Receiver equipment to the CRoHS standard when the product and subassemblies contain hazardous substances beyond the MCV value. This information is found in this user documentation where part numbers for the product and subassemblies are listed. It may be referenced in other documentation that describes the Nokia FastMile 4G Receiver equipment. In accordance with the Peoples Republic of China Electronic Industry Standard Marking for the Control of Pollution Caused by Electronic Information Products

(SJ/T11364-2006), customers may access the Nokia Hazardous Substance Table, in Chinese, by contacting their Nokia representative. 2.3 Other environmental requirements Observe the following environmental requirements when handling Nokia FastMile 4G Receiver equipment. Issue: 01 3TG-01505-AAAB-TCZZA 21 ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview 2.3.1 Environmental requirements See chapter 16 in this document for more information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. 2.3.2 Storage According to ETS 300-019-1-1 - Class 1.1, storage of Nokia FastMile 4G Receiver equipment must be in Class 1.1, weather-protected, temperature-controlled locations. According to EN 300-019-1-2 - Class 2.3, transportation of Nokia FastMile 4G Receiver equipment must be in packed, public transportation. 2.3.3 Transportation 2.3.4 Stationary use According to EN 300-019-1-3 - Class 3.1/3.2/3.E, stationary use of Nokia FastMile 4G Receiver equipment must be in a temperature-controlled location with no condensation allowed. 2.3.5 Thermal limitations The thermal limitations for the Nokia FastMile 4G Receiver equipment are:

operating temperature (ambient):

Compact mono-band and ABA models: 30C to 65C (22F to 149F) Compact multi-band models and High gain CBRS model: 30C to 55C (22F to 131F); Model 4G05-B: 40C to 55C (40F to 131F) Humidity: 5% to 95% non condensing 22 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines 2.3.6 Material content compliance European Union (EU) Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances (RoHS), restricts the use of lead, mercury, cadmium, hexavalent chromium, and certain flame retardants in electrical and electronic equipment. This Directive applies to electrical and electronic products placed on the EU market after 1 July 2006, with various exemptions, including an exemption for lead solder in network infrastructure equipment. Nokia products shipped to the EU after 1 July 2006 comply with the EU RoHS Directive. Nokia has implemented a material/substance content management process. The process is described in: Nokia process for ensuring RoHS Compliance

(1AA002660031ASZZA). This ensures compliance with the European Union Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS2). With the process equipment is assessed in accordance with the Harmonised Standard EN50581:2012 (CENELEC) on Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances. 2.3.7 End-of-life collection and treatment Electronic products bearing or referencing the symbol shown in Figure 3, when put on the market within the European Union (EU), shall be collected and treated at the end of their useful life, in compliance with applicable EU and local legislation. They shall not be disposed of as part of unsorted municipal waste. Due to materials that may be contained in the product, such as heavy metals or batteries, the environment and human health may be negatively impacted as a result of inappropriate disposal. Figure 3 Recycling/take back/disposal of product symbol At the end of its life, Nokia FastMile 4G Receiver equipment is subject to the applicable local legislations that implement the European Directive 2012/19EU on waste electrical and electronic equipment (WEEE). There can be different requirements for collection and treatment in different member states of the European Union. Issue: 01 3TG-01505-AAAB-TCZZA 23 ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview In compliance with legal requirements and contractual agreements, where applicable, Nokia will offer to provide for the collection and treatment of Nokia products bearing the logo shown in Figure 3 at the end of their useful life, or products displaced by Nokia equipment offers. For information regarding take-back of equipment by Nokia, or for more information regarding the requirements for recycling/disposal of product, contact your Nokia account manager or Nokia take back support at sustainability.global@nokia.com. 2.4 Additional information See chapter 17 for RF exposure information. 24 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3 ETSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment in the ETSI market. 3.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 3.1.1 Safety instruction boxes The safety instruction boxes are provided in the Nokia FastMile 4G Receiver customer documentation. Observe the instructions to meet safety requirements. The following is an example of the Danger box. Danger Possibility of personal injury. The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm. Do not proceed beyond a Danger box until the indicated conditions are fully understood and met. The following is an example of the Warning box. Warning 1 Possibility of equipment damage. Warning 2 Possibility of data loss. The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data. Do not proceed beyond a warning until the indicated conditions are fully understood and met. Issue: 01 3TG-01505-AAAB-TCZZA 25 ETSI safety guidelines Nokia FastMile 4G Receiver Product Overview The following is an example of the Caution box. Caution 1 Possibility of service interruption. Caution 2 Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note Information of special interest. The Note box provides information that assists the personnel working with Nokia FastMile 4G Receiver equipment. It does not provide safety-related instructions. 3.1.2 Safety-related labels The Nokia FastMile 4G Receiver equipment is labeled with the specific safety instructions and compliance information that is related to a product, or product variant or model, of the equipment. Observe the instructions on the safety labels. Table 1 provides sample safety labels on Nokia FastMile 4G Receiver equipment. Table 1 Safety labels Description ESD warning Label text Caution: This assembly contains an electrostatic sensitive device. 3.2 Safety standards compliance This section describes Nokia FastMile 4G Receiver equipment compliance with the European safety standards. 26 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3.2.1 EMC compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC requirements:

Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements; Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU EN 301489-1 Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 17: Specific conditions for Broadband Data Transmission Systems;

Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU EN 301489-17 3.2.2 Equipment safety standard compliance The Nokia FastMile 4G Receiver equipment complies with the requirements of the following:

EN 60950-1, Safety of Information Technology Equipment for use in a restricted location (per R-269) IEC 60950-22, EN 60950-22: Information Technology Equipment- Safety - Part 22 Equipment to be installed Outdoors IEC 62368 Audio/video, information and communication technology equipment-

Part 1: Safety requirements IEC 60529 Degrees of protection provided by enclosures (IP Code) 3.2.3 Environmental standard compliance The Nokia FastMile 4G Receiver equipment complies with the EN 300 019 European environmental standards. 3.2.4 Laser product standard compliance The Nokia FastMile 4G Receiver equipment is not a laser product. Issue: 01 3TG-01505-AAAB-TCZZA 27 ETSI safety guidelines Nokia FastMile 4G Receiver Product Overview 3.3 Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note 1 The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. Note 2 The Nokia FastMile 4G Receiver equipment complies with BS EN 61140. 3.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 3.3.2 Cabling The following are the guidelines regarding cables used for the Nokia FastMile 4G Receiver equipment:

All cables must be approved by the relevant national electrical code. Cables for outdoor connection to the Nokia FastMile 4G Receiver equipment must The Nokia FastMile 4G Receiver equipment must be used with the cabling be suitable for outdoor use. supplied with the equipment. 3.3.3 Protective earth Earthing and bonding of the Nokia FastMile 4G Receiver equipment must comply with the requirements of local electrical codes. 28 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3.4 ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver. Service personnel are not required to wear wrist straps when performing normal installation or maintenance activities. 3.5 Environmental requirements See chapter 16 in this document for information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. During operation in the supported temperature range, condensation inside the Nokia FastMile 4G Receiver equipment caused by humidity is not an issue because the Nokia FastMile 4G Receiver is a sealed unit. 3.6 Additional information See chapter 17 for RF exposure information. Issue: 01 3TG-01505-AAAB-TCZZA 29 ETSI safety guidelines Nokia FastMile 4G Receiver Product Overview 30 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines 4 ANSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of the Nokia FastMile 4G Receiver equipment in the North American or ANSI market. 4.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 4.1.1 Safety instruction boxes in customer documentation The safety instruction boxes are provided in the Nokia FastMile 4G Receiver customer documentation. Observe the instructions to meet safety requirements. The following is an example of the Danger box. Danger Possibility of personal injury. The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm. Do not proceed beyond a Danger box until the indicated conditions are fully understood and met. The following is an example of the Warning box. Warning 1 Possibility of equipment damage. Warning 2 Possibility of data loss. The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data. Do not proceed beyond a warning until the indicated conditions are fully understood and met. Issue: 01 3TG-01505-AAAB-TCZZA 31 ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview The following is an example of the Caution box. Caution 1 Possibility of service interruption. Caution 2 Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note Information of special interest. The Note box provides information that assists the personnel working with Nokia FastMile 4G Receiver equipment. It does not provide safety-related instructions. 4.1.2 Safety-related labels The Nokia FastMile 4G Receiver equipment is labeled with specific safety compliance information and instructions that are related to a product, or product model, of the equipment. Observe the instructions on the safety labels. Table 2 provides examples of the text in the various Nokia FastMile 4G Receiver equipment safety labels. Table 2 Safety labels Description UL compliance Label text ETL/cETL UL50E compliance Type 3 ESD warning Caution: This assembly contains electrostatic sensitive device. FCC standards compliance Tested to comply with FCC standards for home or office use. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE marking There are various CE symbols for CE compliance. 32 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines Figure 4 shows a sample safety label for FCC and Figure 5 shows a sample safety label for ETL. Figure 4 Sample safety label for FCC Tested to Comply with FCC Standards FOR HOME OR OFFICE USE c COMMUNICATION SERVICE EQUIPMENT US LISTED 27FY Type 3R Enclosure - Rainproof This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class A est conforme a la norme NMB-003 du Canada CAUTION This Assembly Contains Electrostatic Sensitive Devices 18533 27799 Figure 5 Sample safety label for ETL 5011710 4.2 Safety standards compliance This section describes the Nokia FastMile 4G Receiver equipment compliance with North American safety standards. Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Issue: 01 3TG-01505-AAAB-TCZZA 33 ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview 4.2.1 EMC, EMI, and ESD compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC, EMI, and ESD requirements:

Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247, Part 15.255 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is needed. Consult the dealer or an experienced radio/TV technician for help. 4.2.2 Equipment safety standard compliance The Nokia FastMile 4G Receiver equipment complies with the requirements of:

UL 62368-1 Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements CSA C22.2#62368-1 Audio/Video, Information And Communication Technology Equipment - Part 1: Safety Requirements UL 60950-22 Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors 34 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines 4.3 Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 4.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 4.3.2 Cabling The following are the guidelines regarding cables used for the Nokia FastMile 4G Receiver equipment:

All cables must be approved by the relevant national electrical code. Cables for outdoor connection to the Nokia FastMile 4G Receiver equipment must be suitable for outdoor use. If cabling is supplied with the Nokia FastMile 4G Receiver, the supplied cabling must be used with the equipment. 4.3.3 Protective earth Earthing and bonding of the Nokia FastMile 4G Receiver equipment must comply with the requirements of NEC article 250 or local electrical codes. Issue: 01 3TG-01505-AAAB-TCZZA 35 ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview 4.4 ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver. Service personnel are not required to wear wrist straps when performing normal installation or maintenance activities. 4.5 Environmental requirements See chapter 16 in this document for information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. During operation in the supported temperature range, condensation inside the Nokia FastMile 4G Receiver equipment caused by humidity is not an issue because the Nokia FastMile 4G Receiver is a sealed unit. 4.6 Additional information See chapter 17 for RF exposure information. See chapter 18 for additional FCC compliance information. 36 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Product overview 5 Product overview 5.1 Overview of the Nokia FastMile 4G Receiver 5.2 End-to-end example 5.3 Installing the Nokia FastMile 4G Receiver 5.1 Overview of the Nokia FastMile 4G Receiver The Nokia FastMile 4G Receiver is an outdoor device used in the Nokia FastMile 4G solution. The Nokia FastMile 4G solution uses 3GPP based LTE radio technology to provide indoor and outdoor broadband connectivity with guaranteed high bitrates in larger service areas in a more cost-efficient manner than is possible with other existing solutions.The Nokia FastMile 4G solution can overcome network performance challenges faced by today's mobile networks by optimizing all of the following:

intra site interference due to neighbor sectors in same LTE base station inter site interference due to neighbor base stations link performance due to wall penetration loss and several miles path loss The Nokia FastMile 4G Receiver provides high-performing, outdoor wireless broadband access over LTE to meet residential users total home connectivity needs for urban, suburban, rural, and deep rural spots. The Nokia FastMile 4G Receiver supports LTE connectivity to an LTE base station in the network, and provides 1 Gbps Ethernet connectivity through an Ethernet cable connected to a residential gateway such as the following in the home:

Nokia 7368 ISAM CPE A-020W-A Nokia 7368 ISAM CPE A-240Z-A The Nokia FastMile 4G Receiver can be installed on the side of a house or on a pole close to the house. A pole mount kit that includes a pole adapter can be ordered from Nokia. Figure 6 shows an application example where the Nokia FastMile 4G Receiver is mounted on the side of a house. Issue: 01 3TG-01505-AAAB-TCZZA 37 Product overview Nokia FastMile 4G Receiver Product Overview Figure 6 Application example of the Nokia FastMile 4G Receiver Radio basestation Nokia FastMile 4G Receiver PoE Injector Residential gateway LTE 1 Gbps Ethernet Wi-Fi or Ethernet WiFi or Ethernet connectivity to end-user devices 28814 The Nokia FastMile 4G Receiver is available in the following model types:

Compact multi-band; this model type has the following features:

Compact mono-band; this model type has the following features:

fixed beamforming antennas multi-band transmission fixed beamforming antennas mono-band transmission ABA; this model type has the following features:

high gain beam steering antenna automated beam alignment High gain CBRS band; this model type has the following features:

high gain fixed beamforming antenna CBRS band (B48) transmission Figure 7 shows examples of the model types of the Nokia FastMile 4G Receiver. 38 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Product overview Figure 7 Examples of model types of the Nokia FastMile 4G Receiver Compact/multi-band Compact/mono-band ABA High gain CBRS band 36312 The Nokia FastMile 4G Receiver has built-in antenna and LTE modem that provide the LTE broadband access to the network. The Nokia FastMile 4G Receiver is capable of withstanding outdoor environmental conditions. It has an IP rating of IP66 TYPE3 and can operate in the following temperature ranges:

compact mono-band and ABA models can operate in a temperature of 30C to 65C (22F to 149F) compact multi-band models and the high gain CBRS model can operate in a temperature of 30C to 55C (22F to 131F); the Model 4G05-B can operate in a temperature of 40C to 55C (40F to 131F) See chapter 16 for additional specifications of the Nokia FastMile 4G Receiver. 5.2 End-to-end example The Nokia FastMile 4G Receiver can be used to provide IPTV, Internet, and VoIP services to end-users that are connected to the Nokia FastMile 4G Receiver through a Nokia-approved residential gateway or a Nokia-approved PoE injector. The Nokia FastMile 4G Receiver can also connect directly to a video monitor, personal computer, and so on rather than using a residential gateway and PoE injector. Issue: 01 3TG-01505-AAAB-TCZZA 39 Product overview Nokia FastMile 4G Receiver Product Overview Due to the independence between the Nokia FastMile 4G Receiver and the gateway, the Nokia FastMile 4G Receiver also addresses the business market. The business customer can seamlessly re-use their existing business gateway. The Nokia FastMile 4G Receiver supports extended QCI and multiple APNs that can be mapped on VLANs to support QoS for different services. Figure 8 shows an end-to-end example that features the Nokia FastMile 4G Receiver with a residential gateway and PoE injector. Figure 8 End-to-end example featuring the Nokia FastMile 4G Receiver with a residential gateway and PoE injector Core IPTV Internet VoIP Radio basestation Nokia FastMile 4G Receiver PoE Injector Residential gateway LTE 1 Gbps Ethernet Wi-Fi or Ethernet WiFi or Ethernet connectivity to end-user devices that are using IPTV, internet, and VoIp 28815 5.3 Installing the Nokia FastMile 4G Receiver As part of installing the Nokia FastMile 4G Receiver, you can use the Nokia Wireless app (described in section 6.1.1) to help in determining the mounting location for the Nokia FastMile 4G Receiver with either of the following:

an ACS through TR-069 with help from the Nokia Altiplano FastMile Controller an ACS through TR-069 without help from the Nokia Altiplano FastMile Controller The Nokia FastMile 4G Receiver Installation Guide provides steps on how to use the Nokia Wireless app to help in determining the mounting location, and how to install the Nokia FastMile 4G Receiver on the side of a house or on a pole close to the house. 40 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Functional overview 6 Functional overview 6.1 Overview 6.2 LTE characteristics 6.3 Data forwarding 6.4 Ethernet characteristics 6.5 Power supply characteristics 6.6 Remote management protocols 6.1 Overview The Nokia FastMile 4G Receiver provides wireless broadband access in the form of LTE to meet the ever growing network needs of end users. The Nokia FastMile 4G Receiver is an outdoor device that lets operators use LTE to offer fixed wireless broadband to their customers. The Nokia FastMile 4G Receiver is easy to install and is user-friendly to operate. 6.1.1 Nokia Wireless app The Nokia FastMile 4G Receiver can be installed with the assistance of an Android application, known as Nokia Wireless app, installed on a mobile phone. The app in general lets you scan the QR code of the receiver, identify the best location to install the receiver by measuring the signal strength and connect to the receiver over a Bluetooth connection in order to apply configuration. The Nokia Wireless app also provides management and troubleshooting capabilities for the Nokia FastMile 4G Receiver such as the following:

viewing information that includes:

current and average signal stats for RSRP, RSRQ, RSSI, and SINR LTE cell info such as connection state, status, EARFCN, and PCI other stats (for example, bytes sent and bytes received) uploading CA certificates to the Nokia FastMile 4G Receiver resetting the 4G Receiver to factory settings rebooting the 4G Receiver Issue: 01 3TG-01505-AAAB-TCZZA 41 Functional overview Nokia FastMile 4G Receiver Product Overview See the Installation guide for more information about how the Nokia Wireless app is used in the installation process. See chapter 13 in this document for more information about how Nokia Wireless app can be used for management of the Nokia FastMile 4G Receiver. 6.1.2 Web UI The Nokia FastMile 4G Receiver supports local management capability, allowing status view and configuration operations, through a Web UI for a Nokia FastMile 4G Receiver managed by an ACS through TR-069. The Web UI can be accessed directly from a laptop through the Ethernet port of the Nokia FastMile 4G Receiver via the dedicated static IP address 192.168.0.1

(https://192.168.0.1). Alternatively, it is possible to access the Web UI from behind a Nokia-approved residential gateway which is appropriately configured. It is recommended not to change or reconfigure the Nokia FastMile 4G Receiver static IP for the Web UI interface, since changing the default IP address (that is, 192.168.0.1) would impede access from the Web UI. Web UI functionality is optimized for the following browsers:

Google Chrome (version 76.0.3809.132 or greater) Mozilla Firefox (version 69.0 or greater) Microsoft Edge (version 44.18362.267.0 or greater) Note Internet Explorer is not supported since it will be replaced by Edge and will not be updated from Microsoft any more. The Web UI design is optimized for a resolution of 1920x1080 pixels, but is not restricted to it. Note The Web UI is based on https The client browser will indicate an unknown certificate warning because a Nokia signed certificate is used; this does not constitute a security issue or threat. It is safe to accept the certificate. See chapter 14 in this document for information about using the Web UI to manage the Nokia FastMile 4G Receiver. 42 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Functional overview 6.1.3 Remote management The Nokia FastMile 4G Receiver supports remote management capability, allowing management and health monitoring of it from the Nokia Altiplano FastMile Controller

(through NETCONF) or from an ACS (through TR-069). Note 1 The NETCONF version of the FastMile 4G Receiver for remote management from the Nokia Altiplano FastMile Controller is not supported from FastMile 4G Release 2.0.03a onwards. Note 2 The Nokia FastMile 4G Receiver supports DHCP option 43 when it works as a DHCP server for the gateway by providing information about the ACS to the gateway. The relevant DHCP option 43 parameters must be configured in the preconfig.xml file. See the documentation for the Nokia Altiplano FastMile Controller for information about managing and monitoring the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller. See section 6.6 for information about the remote management protocols. 6.2 LTE characteristics The following are some of the key LTE characteristics of the Nokia FastMile 4G Receiver:

LTE 3GPP Release 12 Compliant, UE Category 12 transmit power: max +23 dBm +/- 2 dBm supports the E-UTRA bands listed in Table 3 Table 3 E-UTRA bands supported by the Nokia FastMile 4G Receiver E-UTRA bands Band 42/43/48 (mono-band support) Band 42/43/48(1) (ABA support) Band 48 (high gain CBRS support) Band 3 (mono-band support) Band 7/38/40/41 (mono-band support) Band 3/7/20/32 (multi-band support) Band 1/3/7/38/40/41/20/28 (multi-band support) 4G05-A and 4G05-B Band 2/25/4/66/7/42/43/48/28 (multi-band support) Band 1/3/7/20/32 (multi-band support) Model 4G01-A 4G01-B 4G01-C 4G02-A 4G03-A 4G04-A 4G06-A 4G17-A Issue: 01 3TG-01505-AAAB-TCZZA 43 Functional overview Nokia FastMile 4G Receiver Product Overview Notes

(1) Note that B48 for the 4G01-B has not been FCC CBRS Part96 certified and is not ready for commercial use. 6.3 Data forwarding The Nokia FastMile 4G Receiver supports the following data forwarding methods:

Table 4 Data forwarding methods supported by the Nokia FastMile 4G Receiver Forwarding mode Typical use Single APN with multi-bearers for route mode Recommended for using only one APN specific for Nokia FastMile 4G Receiver Single APN with multi-bearers for bridge mode Could be used for WAN of the Nokia FastMile 4G Receiver with VLAN tag Multiple APNs with bridge mode Used as multi-APN, separated service with APNs: each APN is for each service. Multiple APNs with mixed mode Note in this case, a specific port should be reserved for service traffic. Can be used for separated APNs on OAM and also other APNs for separated services:

Only default APN is in route mode which could be OAM Besides APN, each APN is for each service Tunnel mode Can be used for using tunnel for L2 forwarding such as PPPoE 6.4 Ethernet characteristics The following are some of the key Ethernet characteristics of the Nokia FastMile 4G Receiver:

provides a 1 Gbps Ethernet LAN Interface that, depending on the model of the Nokia FastMile 4G Receiver, has the following:

the Compact mono-band and ABA models have a pre-attached 3 m (9.8 ft) Cat5e shielded UV resistant twisted pair Ethernet cable with a male RJ 45 connector at the free end; the 4G01-A and 4G03-A Compact mono-band models are also available with a pre-attached 20 m (65.6 ft) Cat5e shielded UV resistant twisted pair Ethernet cable with a male RJ 45 connector at the free end the Compact multi-band models and the High gain CBRS model have a female RJ 45 connector that supports connection of a customer-supplied Ethernet cable:

- the Model 4G17-A requires a Cat5e non-shielded or shielded twisted pair Ethernet cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length

- all other Compact multi-band models and the High gain CBRS model require a Cat5e shielded twisted pair Ethernet cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length supports IEEE802.3 1000BASE-T 44 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Functional overview supports IEEE802.3az energy efficient Ethernet the Ethernet cable for all models is also used for power over Ethernet (PoE) as per IEEE802.3 at type-2 6.5 Power supply characteristics The following are some of the key power supply characteristics of the Nokia FastMile 4G Receiver:

powered through PoE from a Nokia-approved residential gateway, or through a Nokia-approved PoE injector (see section 11.2 for information about PoE injectors for use with the FastMile 4G Receiver) supports PoE+ as per IEEE802.3 at type-2 rating: 53 VDC at 600 mA See section 11.1 for power information. 6.6 Remote management protocols Remote management of the Nokia FastMile 4G Receiver can be done from the Nokia Altiplano FastMile Controller through NETCONF or from an ACS through TR-069/TR181 depending on the installed SIM card. Note The NETCONF version of the FastMile 4G Receiver for remote management from the Nokia Altiplano FastMile Controller is not supported from FastMile 4G Release 2.0.03a onwards. For the first startup, the Nokia FastMile 4G Receiver starts from the NETCONF version.The Nokia FastMile 4G Receiver will automatically detect the remote management protocol through information that is on the SIM card installed in the unit. If the Nokia FastMile 4G Receiver detects that the remote management protocol on the SIM card is TR-069/TR181, it restarts and starts up with TR-069/TR181 management. If the remote management protocol is NETCONF, the Nokia FastMile 4G Receiver can be managed remotely from the Nokia Altiplano FastMile Controller. If the remote management protocol is TR-069, the Nokia FastMile 4G Receiver can be managed remotely from an ACS. Figure 9 shows the Nokia Altiplano FastMile Controller being used for remote management of the Nokia FastMile 4G Receiver. Note that NETCONF is used by the Nokia Altiplano FastMile Controller to manage the Nokia FastMile 4G Receiver, and that an ACS manages the residential gateway through TR-069. Issue: 01 3TG-01505-AAAB-TCZZA 45 Functional overview Nokia FastMile 4G Receiver Product Overview Figure 9 Remote management of the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller IPTV Internet Core VoIP NETCONF Nokia Altiplano Fastmile Controller ACS TR-069 Radio basestation Nokia FastMile 4G Receiver PoE Injector Residential gateway LTE 1 Gbps Ethernet Wi-Fi or Ethernet WiFi or Etherne connectivity to end-user devic that are using IPTV, internet, and VoIp 28 Figure 10 shows an ACS being used for remote management of the Nokia FastMile 4G Receiver. Note that the ACS uses TR-069 to manage both the Nokia FastMile 4G Receiver and the residential gateway. 46 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Functional overview Figure 10 Remote management of the Nokia FastMile 4G Receiver through an ACS Core IPTV Internet VoIP ACS TR-069 Radio basestation Nokia FastMile 4G Receiver PoE Injector Residential gateway LTE 1 Gbps Ethernet Wi-Fi or Ethernet WiFi or Ethernet connectivity to end-user devices that are using IPTV, internet, and VoIp 28817 Issue: 01 3TG-01505-AAAB-TCZZA 47 Functional overview Nokia FastMile 4G Receiver Product Overview 48 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Model overview 7 Model overview 7.1 Models of the Nokia FastMile 4G Receiver 7.1 Models of the Nokia FastMile 4G Receiver A wide range of models are available for the Nokia FastMile 4G Receiver to support different E-UTRA bands and band combinations for LTE, including the capability to limit the bands to be used among the bands physically supported, to support network resource planning, and to speed up the cell attach speed. All models can be wall-mounted or pole-mounted. If you will be mounting the Nokia FastMile 4G Receiver on a pole, you will need kit 3TG-00291-AA that contains the pole adapter for the Nokia FastMile 4G Receiver. Note that pole strapping and wall fasteners are not provided by Nokia. Table 5 describes the E-UTRA band and frequency support and the antenna configurations and model type for each model of the Nokia FastMile 4G Receiver. Table 5 Models of the Nokia FastMile 4G Receiver Model 4G01-A E-UTRA band support and frequencies Band 42: TDD, 3400 MHz 3600 MHz Band 43: TDD, 3600 MHz 3800 MHz Band 48: TDD, 3550 MHz 3700 MHz Antenna configuration Integrated with 15 dBi fixed beamforming antenna Model type Compact mono-band Two types: one with 3m attached Ethernet cable and one with 20m attached Ethernet cable with CPE-CBSD (Cat.B) certificate Band 42: TDD, 3400 MHz 3600 MHz Band 43: TDD, 3600 MHz 3800 MHz Band 48(1): TDD, 3550 MHz 3700 MHz Integrated with 3x4 dual polarized antenna array, electronic beam steering +/- 45 horizontally, and up to 17 dBi peak antenna gain with beam steering ABA 4G01-C Band 48: TDD, 3550 MHz - 3700 MHz Integrated with 19 dBi fixed beamforming antenna High gain CBRS

(CPE-CBSD

(Cat.B) certified) Band 3: FDD, Tx 1710 MHz 1785 MHz, Rx 1805 MHz 1880 MHz Integrated with 10.5 dBi fixed beamforming antenna Compact mono-band 4G01-B 4G02-A

(1 of 3) Issue: 01 3TG-01505-AAAB-TCZZA 49 Model overview Nokia FastMile 4G Receiver Product Overview Model 4G03-A 4G04-A 4G05-A 4G05-B

(2 of 3) Antenna configuration Integrated with 12.5 dBi fixed beamforming antenna Model type Compact mono-band Two types: one with 3m attached Ethernet cable and one with 20m attached Ethernet cable Compact multi-band Band 7 is integrated with > 11 dBi fixed beamforming antenna Band 3 is integrated with > 10 dBi fixed beamforming antenna Band 32 is integrated with > 8.3 dBi fixed beamforming antenna Band 20 is integrated with > 2.5dBi fixed beamforming antenna Bands 7, 38, 40, and 41 are integrated with > 11 dBi fixed beamforming antenna Compact multi-band Bands 1 and 3 are integrated with > 10 dBi fixed beamforming antenna Bands 20 and 28 are integrated with > 2.5 dBi fixed beamforming antenna Bands 7, 38, 40, and 41 are integrated with > 11 dBi fixed beamforming antenna Bands 1 and 3 are integrated with > 10 dBi fixed beamforming antenna Bands 20 and 28 are integrated with > 2.5 dBi fixed beamforming antenna Compact multi-band similar to Model 4G05-A but for use in colder temperatures E-UTRA band support and frequencies Band 7: FDD, Tx 2500 MHz 2570 MHz, Rx 2620 MHz 2690 MHz Band 38: TDD, 2570 MHz 2620 MHz Band 40: TDD, 2300 MHz 2400 MHz Band 41: TDD, 2496 MHz 2690 MHz Band 3: FDD, Tx 1710 MHz 1785 MHz, Rx 1805 MHz 1880 MHz Band 7: FDD, Tx 2500 MHz 2570 MHz, Rx 2620 MHz 2690 MHz Band 20: FDD, Tx 832 MHz 862 MHz Rx 791 MHz 821 MHz Band 32: FDD, Rx 1452 MHz 1496 MHz Band 1: FDD, Tx 1920 MHz 1980 MHz, Rx 2110 MHz 2170 MHz Band 3: FDD, Tx 1710 MHz 1785 MHz, Rx 1805 MHz 1880 MHz Band 7: FDD, Tx 2500 MHz 2570 MHz, Rx 2620 MHz 2690 MHz Band 38: TDD, 2570 MHz 2620 MHz Band 40: TDD, 2300 MHz 2400 MHz Band 41: TDD, 2496 MHz 2690 MHz Band 20: FDD, Tx 832 MHz 862 MHz, Rx 791 MHz 821 MHz Band 28: FDD, Tx 703 MHz 748 MHz, Rx 758 MHz - 803 MHz Band 1: FDD, Tx 1920 MHz 1980 MHz, Rx 2110 MHz 2170 MHz Band 3: FDD, Tx 1710 MHz 1785 MHz, Rx 1805 MHz 1880 MHz Band 7: FDD, Tx 2500 MHz 2570 MHz, Rx 2620 MHz 2690 MHz Band 38: TDD, 2570 MHz 2620 MHz Band 40: TDD, 2300 MHz 2400 MHz Band 41: TDD, 2496 MHz 2690 MHz Band 20: FDD, Tx 832 MHz 862 MHz, Rx 791 MHz 821 MHz Band 28: FDD, Tx 703 MHz 748 MHz, Rx 758 MHz - 803 MHz 50 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Model overview Model 4G06-A 4G17-A

(3 of 3) E-UTRA band support and frequencies Band 2: FDD, Tx 1850 MHz - 1910 MHz, Rx 1930 MHz - 1990 MHz Band 25: FDD, Tx 1850 MHz - 1915 MHz, Rx 1930 MHz - 1995 MHz Band 4: FDD, Tx 1710 MHz - 1755 MHz, Rx 2110 MHz - 2155 MHz Band 66: FDD, Tx 1710 MHz - 1780 MHz, Rx 2110 MHz - 2200 MHz Band 7: FDD, Tx 2500 MHz - 2570 MHz, Rx 2620 MHz - 2690 MHz Band 42: TDD, 3400 MHz - 3600 MHz Band 43: TDD, 3600 MHz - 3800 MHz Band 48: TDD, 3550 MHz - 3700 MHz;

Band 28: FDD, Tx 703 MHz - 748 MHz, Rx 758 MHz -- 803 MHz Band 1: FDD, Tx 1920 MHz -1980 MHz, Rx 2110 MHz -2170 MHz Band 3: FDD, Tx 1710 MHz -1785 MHz, Rx 1805 MHz - 1880 MHz Band 7: FDD, Tx 2500 MHz - 2570 MHz, Rx 2620 MHz - 2690 MHz Band 20: FDD, Tx 832 MHz - 862 MHz, Rx 791 MHz - 821 MHz Band 32: FDD, Rx 1452 MHz - 1496 MHz Antenna configuration Model type Bands 2, 25, 4, and 66 are integrated with > 9.3 dBi fixed beamforming antenna Compact multi-band Bands 7 is integrated with > 11 dBi fixed beamforming antenna Bands 42, 43 and 48 are integrated with > 11 dBi fixed beamforming antenna Band 28 is integrated with > 2.5 dBi fixed beamforming antenna Two types: one with CPE-CBSD (Cat.B) certificate for US CBRS market, and one without certificate for the rest of the market Band 7 is integrated with > 11 dBi fixed beamforming antenna Compact multi-band Bands 1 and 3 are integrated with > 10 dBi fixed beamforming antenna Band 32 is integrated with > 8.3 dBi fixed beamforming antenna Band 20 is integrated with > 2.5dBi fixed beamforming antenna Notes

(1) Note that B48 for the 4G01-B has not been FCC CBRS Part96 certified and is not ready for commercial use 7.1.1 Label information Table 6 describes the label information for the Nokia FastMile 4G Receiver. Table 6 Label information for the Nokia FastMile 4G Receiver Model 4G01-A 4G01-B 4G01-C 4G02-A 4G03-A 4G04-A 4G05-A 4G05-B

(1 of 2) Nokia FM high gain CBRS Product details Nokia FM compact Nokia FM ABA Nokia FM compact Nokia FM compact Nokia FM compact Nokia FM compact Nokia FM compact Issue: 01 3TG-01505-AAAB-TCZZA 51 Model overview Nokia FastMile 4G Receiver Product Overview Model 4G06-A 4G17-A

(2 of 2) Product details Nokia FM compact Nokia FM compact 52 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Physical interfaces 8 Physical interfaces 8.1 Physical interfaces of the Compact mono-band and ABA models 8.2 Physical interfaces of the Compact multi-band models 8.3 Physical interfaces of the High gain CBRS model 8.1 Physical interfaces of the Compact mono-band and ABA models Table 7 describes the physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Table 7 Physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Interface Description Ground point Point for connecting to external ground. Connection to the ground point is not required. Located on the underside of the unit; see Figure 11. Ethernet cable Ethernet connectivity for the Compact mono-band and ABA models is through a pre-attached 3 m (9.8 ft) cat5e shielded UV resistant Ethernet cable; the same cable is also used for power (PoE as per IEEE802.3 at type-2). PoE must be provided by a Nokia-approved residential gateway or a Nokia-approved PoE injector (see section 11.2 for information about PoE injectors for use with the FastMile 4G Receiver). The 4G01-A and 4G03-A Compact mono-band models are also available with a pre-attached 20 m (65.6 ft) Cat5e shielded UV resistant twisted pair Ethernet cable. Located on the underside of the unit; see Figure 11. The pre-attached Ethernet cable has a male RJ 45 connector at the free end. An additional length of cat5e shielded Ethernet cabling can be attached to the Ethernet cable up to a maximum of 80 m (262 ft) in combined length. A waterproof IP67 female RJ 45 plug is needed to connect the Ethernet cabling to the Ethernet cable of the Nokia FastMile 4G Receiver. Status LED Single multifunction LED that indicates status information for the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11. See section 10.1 for the behavior of the status LED of the Compact mono-band and ABA models. Reset button Button to reset the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11.

(1 of 2) Issue: 01 3TG-01505-AAAB-TCZZA 53 Physical interfaces Nokia FastMile 4G Receiver Product Overview Interface SIM slot Description Slot for Nano/4FF SIM card for a Compact mono-band model or ABA model of the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11. If the SIM card needs to be replaced, the Nokia FastMile 4G Receiver needs to be put in a powered off state before the SIM card can be removed and the new one inserted See section 9.1 for SIM card information for the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver.

(2 of 2) Figure 11 shows the location of the physical interfaces on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Figure 11 Location of physical interfaces on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Ground point Ethernet Cable SIM slot Status LED Reset button 28797 8.2 Physical interfaces of the Compact multi-band models Table 8 describes the physical interfaces of Compact multi-band models of the Nokia FastMile 4G Receiver. Table 8 Physical interfaces of the Compact multi-band models of the Nokia FastMile 4G Receiver Interface Description Ground point Point for connecting to external ground. Connection to the ground point is not required. Located on the back of the unit; see Figure 12.

(1 of 2) 54 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Physical interfaces Interface Description Ethernet port Female RJ 45 connector for attaching a customer-supplied Ethernet cable:

the Model 4G17-A has a floating ground design that supports a Cat5e non-shielded or shielded twisted pair Ethernet cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length all other Compact multi-band models require a cat5e shielded Ethernet cable with standard pinouts that is a maximum of 80 m (262 ft) in length The same Ethernet cable is also used for power (PoE as per IEEE802.3 at type-2). PoE must be provided by a Nokia-approved residential gateway or a Nokia-approved PoE injector (see section 11.2 for information about PoE injectors for use with the FastMile 4G Receiver). The Ethernet port is located on the underside of the unit; see Figure 13. Reset button Button to reset the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 13. SIM slot Slot for Nano/4FF SIM card for a Compact multi-band model of the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 13. See section 9.2 for SIM card information for the Compact multi-band models of the Nokia FastMile 4G Receiver. Status LED Single multifunction LED that indicates status information for the Nokia FastMile 4G Receiver. Located on the top of the unit. See section 10.1 for a figure showing the location of the status LED of the Compact multi-band models and information about its behavior. Signal strength LEDs Set of five LEDs that work together to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver. Located on the top of the unit. See section 10.2 for a figure showing the location of the signal strength LEDs and information about their behavior. Measurement button Button to activate the signal strength LEDs. Located on the side of the unit. See section 10.2 for a figure showing the location of the measurement button and information about using it to activate the signal strength LEDs.

(2 of 2) Figure 12 shows the location of the ground point for the Compact multi-band models of the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 55 Physical interfaces Nokia FastMile 4G Receiver Product Overview Figure 12 Location of the ground point for the Compact multi-band models of the Nokia FastMile 4G Receiver Figure 13 shows the location of the physical interfaces that are on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 13 Location of physical interfaces on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver Vent M6 Ethernet port SIM slot Reset button Ground point 28798 28771 56 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Physical interfaces 8.3 Physical interfaces of the High gain CBRS model Table 9 describes the physical interfaces of the High gain CBRS model of the Nokia FastMile 4G Receiver. Table 9 Physical interfaces of the High gain CBRS model of the Nokia FastMile 4G Receiver Interface Description Ground point Point for connecting to external ground. Connection to the ground point is not required. Located on the back of the unit; see Figure 14. Measurement button Button to activate the signal strength LEDs. Located on the underside of the unit; see Figure 15. See section 10.2 for information about using the measurement button to activate the signal strength LEDs. Signal strength LEDs Set of five LEDs that work together to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 15. See section 10.2 for the behavior of the signal strength LEDs. Ethernet port Female RJ 45 connector for attaching a customer-supplied cat5e shielded Ethernet cable with standard pinouts that is a maximum of 80 m (262 ft) in length. The same Ethernet cable is also used for power (PoE as per IEEE802.3 at type-2). PoE must be provided by a Nokia-approved residential gateway or a Nokia-approved PoE injector (see section 11.2 for information about PoE injectors for use with the FastMile 4G Receiver). The Ethernet port is located on the underside of the unit; see Figure 15. Status LED Single multifunction LED that indicates status information for the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 15. See section 10.1 for the behavior of the status LED. SIM slot Slot for Nano/4FF SIM card for the High gain CBRS model of the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 15. See section 9.3 for SIM card information for the High gain CBRS model of the Nokia FastMile 4G Receiver. Reset button Button to reset the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 15. Figure 14 shows the location of the ground point for the High gain CBRS model of the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 57 Physical interfaces Nokia FastMile 4G Receiver Product Overview Figure 14 Location of the ground point for High gain CBRS model of the Nokia FastMile 4G Receiver Ground point 36313 Figure 15 shows the location of the physical interfaces that are on the underside of the High gain CBRS model of the Nokia FastMile 4G Receiver. 58 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Physical interfaces Figure 15 Location of physical interfaces on the underside of the High gain CBRS model type of the Nokia FastMile 4G Receiver Measurement button Signal strength LEDs TEST POE SIM RESET Reset button SIM Tray Status LED Ethernet port 36314 Issue: 01 3TG-01505-AAAB-TCZZA 59 Physical interfaces Nokia FastMile 4G Receiver Product Overview 60 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview SIM cards 9 SIM cards 9.1 SIM card information for the Compact mono-band and ABA models 9.2 SIM card information for the Compact multi-band models 9.3 SIM card information for the High gain CBRS model 9.1 SIM card information for the Compact mono-band and ABA models The SIM card installed in the Nokia FastMile 4G Receiver allows the Nokia FastMile 4G Receiver to connect to the LTE network and determines the remote management protocol supported for the Nokia FastMile 4G Receiver; see section 6.6 for more information about remote management. Figure 16 shows a detailed view of the SIM card slot on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Figure 16 Detailed view of SIM card slot on the Compact mono-band and ABA models The Nokia FastMile 4G Receiver Installation Guide provides detailed steps for inserting the SIM card. The SIM card must be appropriate for the remote management protocol to be used for the Nokia FastMile 4G Receiver. 28642 Issue: 01 3TG-01505-AAAB-TCZZA 61 SIM cards Nokia FastMile 4G Receiver Product Overview 9.2 SIM card information for the Compact multi-band models The SIM card installed in the Nokia FastMile 4G Receiver allows the Nokia FastMile 4G Receiver to connect to the LTE network and determines the remote management protocol supported for the Nokia FastMile 4G Receiver; see section 6.6 for more information about remote management. Figure 17 shows a detailed view of the SIM card slot on the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 17 Detailed view of SIM card slot on the Compact multi-band models 28802 The Nokia FastMile 4G Receiver Installation Guide provides detailed steps for inserting the SIM card. The SIM card must be appropriate for the remote management protocol to be used for the Nokia FastMile 4G Receiver. 9.3 SIM card information for the High gain CBRS model The SIM card installed in the Nokia FastMile 4G Receiver allows the Nokia FastMile 4G Receiver to connect to the LTE network and determines the remote management protocol supported for the Nokia FastMile 4G Receiver; see section 6.6 for more information about remote management. Figure 18 shows a detailed view of the SIM card slot on the High gain CBRS model of the Nokia FastMile 4G Receiver. 62 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview SIM cards Figure 18 Detailed view of SIM card slot on the High gain CBRS model TEST POE SIM RESET RESET 36315 The Nokia FastMile 4G Receiver Installation Guide provides detailed steps for inserting the SIM card. The SIM card must be appropriate for the remote management protocol to be used for the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 63 SIM cards Nokia FastMile 4G Receiver Product Overview 64 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview LEDs 10 LEDs 10.1 Status LED 10.2 Signal strength LEDs 10.1 Status LED All models of the Nokia FastMile 4G Receiver have a status LED:

Figure 19 shows the location of the status LED on the Compact mono-band and ABA models models Figure 20 shows the location of the status LED on the Compact multi-band Figure 21 shows the location of the status LED on the High gain CBRS model Figure 19 Location of the status LED on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Figure 20 Location of the status LED on the Compact multi-band models of the Nokia FastMile 4G Receiver 28799 28772 Status LED Status LED Issue: 01 3TG-01505-AAAB-TCZZA 65 LEDs Nokia FastMile 4G Receiver Product Overview Figure 21 Location of the status LED on the High gain CBRS model of the Nokia FastMile 4G Receiver TEST POE SIM RESET Status LED 36316 The status LED behaves differently depending on whether the Nokia FastMile 4G Receiver is managed from:

the Nokia Altiplano FastMile Controller (through NETCONF): see Table 10 an ACS (through TR-069): see Table 11 Note The NETCONF version of the FastMile 4G Receiver for remote management from the Nokia Altiplano FastMile Controller is not supported from FastMile 4G Release 2.0.03a onwards Table 10 Status LED behavior for Nokia FastMile 4G Receiver managed from the Nokia Altiplano FastMile Controller LED color LED priority LED behavior Status information Blue First priority Blinking Bluetooth connection in progress Red Second priority Blinking Critical alarm Green Third priority Blinking twice per second Kernel and application start up Blinking one per second Application start up Bluetooth connection established No Bluetooth connection Major or minor alarm No alarm Start up OAM link is established Solid Off Solid Off Solid Off 66 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview LEDs Table 11 Status LED behavior for Nokia FastMile 4G Receiver managed from an ACS LED color LED priority LED behavior Status information Blue First priority Blinking Bluetooth connection in progress Green Second priority Blinking twice per second Kernel and application start up Bluetooth connection established No Bluetooth connection Solid Off Solid Off Blinking one per second Application start up Start up Software is stable 10.2 Signal strength LEDs Signal strength LEDs are provided on the following model types of the Nokia FastMile 4G Receiver:

Compact multi-band models (see section 10.2.1) High gain CBRS model (see section 10.2.2) 10.2.1 Signal strength LEDs on the Compact multi-band models Five signal strength LEDs are provided on the Compact multi-band models of the Nokia FastMile 4G Receiver as shown in Figure 22. Figure 22 Location of the signal strength LEDs on the Compact multi-band models Signal strength LEDs 28773 Issue: 01 3TG-01505-AAAB-TCZZA 67 LEDs Nokia FastMile 4G Receiver Product Overview The signal strength LEDs can be activated by pressing the measurement button on the side of the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 23 shows the location of the measurement button. Figure 23 Location of the measurement button on the Compact multi-band models Measurement button 28885 The signal strength LEDs act as a set to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver. For example, if the signal strength is fourth level, then LEDs 1, 2, 3, and 4 are lit. Table 12 lists the threshold values for the signal strength LEDs, but note that the threshold values can be changed through an ACS. Table 12 Signal strength LED threshold values Number of lit LEDs None One Two Three Four Five Threshold

<-110dBm

-110 to -106 dBm

-105 to -101dBm

-100 to -96dBm

-95 to -91dBm

>=-90dBm 68 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview LEDs 10.2.2 Signal strength LEDs on the High gain CBRS model Five signal strength LEDs are provided on the underside of the High gain CBRS model of the Nokia FastMile 4G Receiver as shown in Figure 24. Figure 24 Location of the signal strength LEDs on the High gain CBRS model TEST POE SIM RESET Signal strength LEDs The signal strength LEDs can be activated by pressing the measurement button on the underside of the High gain CBRS model of the Nokia FastMile 4G Receiver. Figure 25 shows the location of the measurement button. Figure 25 Location of the measurement button on the High gain CBRS model TEST POE SIM RESET Measurement button 36317 36318 The signal strength LEDs act as a set to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver. For example, if the signal strength is fourth level, then LEDs 1, 2, 3, and 4 are lit. Table 13 lists the threshold values for the signal strength LEDs, but note that the threshold values can be changed through an ACS. Issue: 01 3TG-01505-AAAB-TCZZA 69 LEDs Nokia FastMile 4G Receiver Product Overview Table 13 Signal strength LED threshold values Number of lit LEDs None One Two Three Four Five Threshold

<-110dBm

-110 to -106 dBm

-105 to -101dBm

-100 to -96dBm

-95 to -91dBm

>=-90dBm 70 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Power information 11 Power information 11.1 Power information for the Nokia FastMile 4G Receiver 11.2 Available PoE injectors 11.1 Power information for the Nokia FastMile 4G Receiver The Nokia FastMile 4G Receiver receives power though a Cat5e shielded Ethernet cable (or through a non-shielded Ethernet cable for the Model 4G17-A only) that must be connected to a Nokia-approved residential gateway or to a Nokia-approved PoE injector (see section 11.2 for information about PoE injectors available from Nokia for use with the FastMile 4G Receiver). Compact mono-band and ABA models have a pre-attached Cat5e shielded twisted pair Ethernet cable with a male RJ 45 connector at the free end. An additional length of cat5e shielded Ethernet cabling can be attached to the Ethernet cable up to a maximum of 80 m (262 ft) in combined length. A waterproof IP67 female RJ 45 plug is needed to connect the Ethernet cabling to the Ethernet cable of the Nokia FastMile 4G Receiver. See section 8.1 for more information about the pre-attached Ethernet cable. Compact multi-band models and the High gain CBRS model have an Ethernet port that has a female RJ 45 connector, and require a customer-supplied Ethernet cable (See section 8.2 for more information about the Ethernet port):

the Model 4G17-A has a floating ground design that supports a cat5e non-shielded or shielded twisted pair Ethernet cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length all other Compact multi-band models and the High gain CBRS model require a cat5e shielded Ethernet cable with standard pinouts that is a maximum of 80 m (262 ft) in length See section 12.4 for power consumption information. 11.2 Available PoE injectors If the Nokia FastMile 4G Receiver is going to be powered through a PoE injector, the PoE injector must be a Nokia-approved PoE injector. Issue: 01 3TG-01505-AAAB-TCZZA 71 Power information Nokia FastMile 4G Receiver Product Overview The following classes of PoE injectors are available from Nokia for use with the FastMile 4G Receiver:

Class I: can comply with EN 60950-1 if grounding is provided on the wall socket;

should be put as close as possible to the place where the Ethernet cable enters the home Class II: can comply with EN 60950-1 if no grounding is provided on the wall socket; can also be used if grounding is provided on the wall socket The following tables list the PoE injectors that are available from Nokia for use with the FastMile 4G Receiver:

Table 14 lists the PoE injectors that are available from Nokia for use with the Model 4G17-A Table 15 lists the PoE injectors that are available from Nokia for use with all other models of the FastMile 4G Receiver Table 14 Available PoE injectors for Model 4G17-A Class Model Description Color Vendor part number Nokia part number Class II 15w FWAPoE2-CC-EU-W White 3TG-01541-BB G1344B-530-030-PSE1000, CH-221+CH-705,White,EU 15w G1344B 50V 0.3A, MAINS CORD TYPE C-EU 72 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Power information Table 15 Available PoE injectors for models other than Model 4G17-A Class Model Description Color Vendor part number Nokia part number Class I 15w FWAPoE2-CB-US-W White 3TG-01541-AA 15w FWAPoE2-CEF-EU-W White 3TG-01541-AB 30w FWAPoE1-CB-US-W White 3TG-00041-AA 30w FWAPoE1-CEF-EU-W 30w G0545 53V0.6A, MAINS CORD TYPE E&F-EU White 3TG-00041-AB G0545-530-060-PSE1000, CH-231+CH-706,White,EU 30w FWAPoE1-CG-UK-W White 3TG-00041-AC 30w FWAPoE1-CI-CCC-W White 3TG-00041-AD 30w FWAPoE1-CI-AU-W White 3TG-00041-AE 30w FWAPoE1-CB-PSE-W 30w G0545 53V0.6A, MAINS CORD TYPE B-PSE White 3TG-00041-AF G0545-530-060-PSE1000, CH-1131+CH-1106,White,PSE 30w FWAPoE1-CD-BIS-W White 3TG-00041-AG G1344A-530-030-PSE1000, CH-331C+CH-706,White,US G1344A-530-030-PSE1000, CH-231+CH-706,White,EU G0545-530-060-PSE1000, CH-331C+CH-706,White,US G0545-530-060-PSE1000, CH-1601+CH-706,White,UK G0545-530-060-PSE1000, CH-133+CH-706,White,CCC G0545-530-060-PSE1000, CH-1231+CH-706,White,AU G0545-530-060-PSE1000, CH-2002+CH-706,White,BIS G0545N-530-060-PSE1000, CH-221+CH-706,White,EU 15w G1344A 50V 0.3A, MAINS CORD TYPE B-US 15w G1344A 50V 0.3A, MAINS CORD TYPE E&F-EU 30w G0545 53V0.6A, MAINS CORD TYPE B-US 30w G0545 53V0.6A, MAINS CORD TYPE G-UK 30w G0545 53V0.6A, MAINS CORD TYPE I-CCC 30w G0545 53V0.6A, MAINS CORD TYPE I-AU 30w G0545 53V0.6A, MAINS CORD TYPE D-BIS 30w G0545 53V0.6A, MAINS CORD TYPE C-EU Figure 26 shows the PoE injectors available from Nokia. Class II 30w FWAPoE1-CC-EU-W White 3TG-00041-BB Issue: 01 3TG-01505-AAAB-TCZZA 73 Power information Nokia FastMile 4G Receiver Product Overview Figure 26 PoE injectors available from Nokia POWER/Active LAN POE POWER ACTIVE LAN POE LAN port PoE port LAN port PoE port 15W PoE injector 30W PoE injector 36184 Table 16 provides LED information for the PoE injectors available from Nokia. Table 16 LED information for PoE injectors available from Nokia PoE injector LED information 15W 30W Power/Active LED:

Green solid: PoE power on and legal device connected Yellow solid: PoE power on and no device or illegal device connected Green and yellow flashing alternately: PoE power on but short circuited Power LED and Active LED:

Both LEDs green solid: PoE power on and legal device connected Power LED green solid and Active LED off: PoE power on and no device or Power LED green solid and Active LED green flashing: PoE power on but short illegal device connected circuited 74 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information 12 Performance information 12.1 Performance overview 12.2 Throughput information 12.3 Carrier aggregation information 12.4 Power consumption information 12.1 Performance overview This chapter provides the following performance information for the Nokia FastMile 4G Receiver:

throughput information: see section 12.2 carrier aggregation information: see section 12.3 power consumption information: section 12.4 Some performance metrics for the Nokia FastMile 4G Receiver can be viewed through the Nokia Wireless app or Web UI or accessed through the Nokia Altiplano FastMile Controller:

see chapter 13 for more information about viewing information for the Nokia FastMile 4G Receiver through the Nokia Wireless app see chapter 14 for more information about viewing information for the Nokia FastMile 4G Receiver through the Web UI see the documentation for the Nokia Altiplano FastMile Controller for more information about accessing information for the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller 12.2 Throughput information Table 17 provides LTE throughput information for the Nokia FastMile 4G Receiver. Table 17 LTE throughput information Mode UDP DL (3CA) TCP DL (3CA) UDP UL TCP UL FDD TDD 560M 415M 360M 360M 73M 14M 73M 18M Issue: 01 3TG-01505-AAAB-TCZZA 75 Performance information Nokia FastMile 4G Receiver Product Overview The results in the above table are based on the following:

Downlink: DL 3xCA 2x2MIMO 256 QAM Uplink: single carrier 64 QAM FDD inter-band 3CA TDD Band 41 intra-Band 2CA, configuration is configuration 2, subframe 7 Base Bandwidth 20M Data rates can have a margin of 2%

Packet length is 1470B for UDP Window is 1000k for TCP Data rates are for IPv4 cases Data forwarding working on router model The end-to-end throughput is achieved in the conductive mode with cable connected. Ethernet throughput for the Nokia FastMile 4G Receiver is as per standard Ethernet 1000BASE-T, with a maximum of 1000 Mbps. The Ethernet link gets negotiated at 1000 Mbps when a residential gateway or a PoE injector is connected to the Nokia FastMile 4G Receiver. 12.3 Carrier aggregation information The following tables provide carrier aggregation support information for the Nokia FastMile 4G Receiver:

Model 4G01-A and 4G01-B (2*2 MIMO downlink with SISO uplink): Table 18 Model 4G01-C (2*2 MIMO downlink with SISO uplink): Table 19 Model 4G02-A (2*2 MIMO downlink with SISO uplink): Table 20 Model 4G03-A (2*2 MIMO downlink with SISO uplink): Table 21 Model 4G04-A (2*2 MIMO downlink with SISO uplink): Table 22 Model 4G05-A and 4G05-B (2*2 MIMO downlink): Table 23 Model 4G06-A (2*2 MIMO downlink): Table 24 Model 4G17-A (2*2 MIMO downlink with SISO uplink): Table 25 Note B48 for the 4G01-B has not been FCC CBRS Part96 certified and is not ready for commercial use. 76 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information Table 18 Carrier aggregation support for Model 4G01-A and Model 4G01-B

(2*2 MIMO downlink with SISO uplink) Index Downlink Upload PCC SCC1 SCC2 SCC3 PCC SCC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

(1 of 3) 42A 43A 42C 43C 48C 42A 43A 48A 42A 43A 42C 43C 48C 42A 43A 48A 42A 43A 48A 42A 42A 43A 43A 42D 43D 48D 42A 43A 48A 42A 43A 43A 42A 42A 43A 48A 43A 42A 42A 43A 48A 43C 42C 48C 42A 43A 43A 42A 42A 43A 48A 43C 42C 43A 43A 42A 42A 42A 43A 48A 42A 43A 42C 43C 48C 42A 43A 48A 43A 42A 42A 43A 48A 42A 43A 43A 42A Issue: 01 3TG-01505-AAAB-TCZZA 77 Performance information Nokia FastMile 4G Receiver Product Overview Index Downlink PCC SCC1 SCC2 SCC3 PCC Upload 48A 42A 42A 43A 43A 42C 43C 48C 42A 43A 48A SCC 48A 42A 43A 43A 42A 42A 43A 48A 42A 43A 48A 42A 42A 42A 43A 42A 48A 42A 42A 43A 43A 43A 43A 42A 42A 42A 42A 43A 48A 43A 43A 43A 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

(2 of 3) 48A 42A 42A 43A 43A 42D 43D 48D 42A 43A 48A 42A 43A 48A 42A 42A 42A 43A 43A 43A 42E 43E 48E 48A 42A 43A 48A 42A 43A 48A 42A 42A 42A 43A 43A 42A 42A 42A 43A 48A 42A 43A 43A 42A 42A 43A 48C 42A 43A 48A 42A 43A 43A 48C 42A 43A 43A 42A 42A 43A 48A 43D 42D 48D 42A 42A 43A 42A 43A 43A 48A 42A 43A 48A 43D 42D 48D 42A 42A 43A 78 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information Index Downlink PCC SCC1 SCC2 SCC3 PCC 42A 42A 43A 48C 42A 43A 48A 42A 42A 42A 42A 43A 48A Upload 43A 43A 43A 42C 43C 48C 48A 42A 43A 48A SCC 42A 43A 43A 48A 42A 43A 48A

(3 of 3) Table 19 Carrier aggregation support for Model 4G01-C (2*2 MIMO down-

link with SISO uplink) Index Downlink Uplink PCC SCC2 SCC3 PCC SCC1 65 66 67 68 69 70 71 72 73 74 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 43A 43A 43A 42E 43E 48E 48A 42A 43A 48A 48A 48C 48A 48C 48A 48C 48D 48A 48C 48D 48A 48C 48D 48E 48A 48C 48D 42A 43A 43A 48A 42A 43A 48A SCC1 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48C 48A 48A 48C 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A 48A Issue: 01 3TG-01505-AAAB-TCZZA 79 Performance information Nokia FastMile 4G Receiver Product Overview Table 20 Carrier aggregation support for Model 4G02-A (2*2 MIMO down-

link with SISO uplink) Index Downlink Uplink PCC SCC1 SCC2 SCC3 PCC SCC1 Table 21 Carrier aggregation support for Model 4G03-A (2*2 MIMO down-

link with SISO uplink) index Downlink PCC SCC SCC Uplink PCC 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 13

(1 of 3) 3C 3A 3C 3A 3D 3A 3D 3A 3E 3A 3E 3A 3A 3A 3A 3A 3A 3A 7C 38C 40C 41C 7A 38A 40A 41A 7C 38C 40C 41C 7A 3A 3A 3A 7A 3C 3A 3C 3A 3C 3A 3A 3A 3A 3A 3A 3A 7C 38C 40C 41C 7A 7A 38A 40A 41A 7A 80 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information index Downlink PCC SCC 38A 40A 41A 7A 38A 40A 41A 7A 38A 40A 41A 7C 38C 40C 41C 7C 38C Uplink PCC 38A 40A 41A 7C 38C 40C 41C 7A 38A 40A 41A 7C 38C 40C 41C 7A 38A SCC 38A 40A 41A 7A 38A 40A 41A 7A 38A 38A 40A 41A 7D 38D 40D 41D 7C 38C 40C 41C 7D 38D 40D 41D 7C 38C 40C 41C 7E 38E 40E 41E 7C 38C 40C 41C 7E 38E 40E 41E 7C 38C 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

(2 of 3) Issue: 01 3TG-01505-AAAB-TCZZA 81 Performance information Nokia FastMile 4G Receiver Product Overview Downlink PCC 40C 41C SCC 40C 41C Uplink PCC 40A 41A SCC 40A 41A Carrier aggregation support for Model 4G04-A (2*2 MIMO down-

link with SISO uplink) Index Downlink PCC SCC1 SCC2 SCC1 Uplink PCC index 47 48

(3 of 3) Table 22 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3A 3A 3A 7A 20A 7A 7A 20A 20A 3A 3A 7A 20A 7A 20A 3A 7A 20A 3A 20A 7A 20A 32A 3A 3A 20A 32A 7A 32A 7A 20A 3A 3A 20A 7A 7A 3A 7A 20A 3A 3A 3A 7A 20A 7A 20A 7A 20A 3A 3A 20A 7A 20A 20A 3A 32A 32A 82 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information Table 23 Carrier aggregation support for Model 4G05-A and Model 4G05-B

(2*2 MIMO downlink) Index Downlink PCC SCC1 SCC2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

(1 of 4) 1A 3A 1A 7A 1A 38A 1A 41A 3A 7A 3A 20A 3A 28A 3A 38A 3A 40A 3A 41A 28A 40A 28A 41A 3C 28C 40C 41C 1A 3C 1C 3A 1A 7A 1A 38A 1A 41A 1A 7A 3A 20A 3A 28A 3A 38A 3A 40A 3A 41A 3A 40A 28A 41A 28A 3C 1A 7A Issue: 01 3TG-01505-AAAB-TCZZA 83 Performance information Nokia FastMile 4G Receiver Product Overview Index Downlink PCC SCC1 SCC2 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

(2 of 4) 7A 3A 7C 3A 38C 3A 40C 3A 41C 28A 40C 28A 41C 1A 3A 7A 1A 3A 38A 1A 3A 41A 3A 28A 40A 3A 28A 41A 41D 1C 3C 1A 3D 1C 7C 3A 38C 3A 40C 3A 41C 3A 40C 28A 41C 28A 3A 1A 3A 3A 1A 3A 3A 1A 3A 28A 3A 28A 28A 3A 28A 3C 1C 3D 1A 7A 7A 1A 38A 38A 1A 41A 41A 1A 40A 40A 3A 41A 41A 3A 84 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information Index Downlink PCC SCC1 SCC2 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

(3 of 4) 3C 7C 3A 7D 3C 38C 3A 38D 3C 40C 3A 40D 3C 41C 3A 41D 28C 40C 28A 40D 28C 41C 28A 41D 1A 3A 7C 1A 3C 7A 1A 3A 38C 7C 3C 7D 3A 38C 3C 38D 3A 40C 3C 40D 3A 41C 3C 41D 3A 40C 28C 40D 28A 41C 28C 41D 28A 3A 1A 3A 3C 1A 3C 3A 1A 3A 7C 7C 1A 7A 7A 1A 38C 38C 1A Issue: 01 3TG-01505-AAAB-TCZZA 85 Performance information Nokia FastMile 4G Receiver Product Overview Index Downlink PCC SCC1 SCC2 38A 38A 1A 41C 41C 1A 41A 41A 1A 40C 40C 3A 40A 40A 3A 41C 41C 3A 41A 41A 3A 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 1 2 3 4 5 6

(1 of 5) 1A 3C 38A 1A 3A 41C 1A 3C 41A 3A 28A 40C 3A 28C 40A 3A 28A 41C 3A 28C 41A PCC 2A 4A 2A 7A 2A 28A 3C 1A 3C 3A 1A 3A 3C 1A 3C 28A 3A 28A 28C 3A 28C 28A 3A 28A 28C 3A 28C 4A 2A 7A 2A 28A 2A

(4 of 4) Table 24 Index Downlink Carrier aggregation support for Model 4G06-A (2*2 MIMO down-

link) SCC1 SCC2 SCC3 86 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information Index Downlink PCC SCC1 SCC2 SCC3 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 28 30 31 32 33 34 35 36 37 38 39

(2 of 5) 2A 42A 2A 48A 2A 66A 4A 7A 4A 28A 4A 42A 4A 43A 7A 28A 7A 42A 7A 43A 7A 66A 28A 42A 28A 43A 28A 66A 42A 66A 43A 66A 2C 42A 2A 48A 2A 66A 2A 7A 4A 28A 4A 42A 4A 43A 4A 28A 7A 42A 7A 43A 7A 66A 7A 42A 28A 43A 28A 66A 28A 66A 42A 66A 43A Issue: 01 3TG-01505-AAAB-TCZZA 87 Performance information Nokia FastMile 4G Receiver Product Overview Index Downlink PCC SCC1 SCC2 SCC3 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

(3 of 5) 4C 7C 25C 28C 42C 43C 48C 66C 2A 4A 28A 2A 4A 48A 2A 7A 42A 2A 28A 42A 2A 28A 43A 2A 28A 66A 2A 48A 66A 4A 7A 28A 4A 28A 28A 4A 48A 48A 4A 42A 42A 7A 42A 42A 28A 43A 43A 28A 66A 66A 28A 66A 66A 48A 28A 28A 7A 42A 4A 2A 2A 4A 2A 2A 7A 2A 2A 28A 2A 2A 28A 2A 2A 28A 2A 2A 48A 2A 2A 7A 4A 4A 7A 88 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Performance information Index Downlink SCC1 SCC2 SCC3 42A 7A 43A 43A 7A 42A 42A 28A 43A 43A 28A 66A 66A 28A 66A 66A 42A 66A 66A 43A 66A 66A 42A 66A 66A 43A 28A 28A 4A 28A 28A 28A 4A 42A 42A 42A 4A 43A 43A 43A 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

(4 of 5) PCC 7A 42A 4A 7A 43A 4A 28A 42A 4A 28A 43A 7A 28A 66A 7A 42A 66A 7A 43A 66A 28A 42A 66A 28A 43A 66A 4A 7A 28A 42A 4A 7A 28A 4A 4A 7A 4A 4A 28A 4A 4A 28A 4A 4A 28A 7A 7A 42A 7A 7A 43A 7A 7A 42A 28A 28A 43A 28A 28A 7A 4A 7A 7A 7A 4A 7A Issue: 01 3TG-01505-AAAB-TCZZA 89 Performance information Nokia FastMile 4G Receiver Product Overview Index Downlink PCC SCC1 SCC2 SCC3 7A 28A 7A 28A 28A 28A 7A 28A 28A 28A 42A 42A 7A 42A 43A 43A 7A 43A 4A 66A 66A 66A 7A 66A 66A 66A 7A

(5 of 5) Table 25 Carrier aggregation support for Model 4G17-A (2*2 MIMO down-

link with SISO uplink) Index Downlink Uplink PCC SCC1 SCC2 SCC3 PCC SCC1 SCC2 1A 3A 1A 7A 3A 3A 1A 7A 1A 7A 7A 7A 1A 32A 90 3TG-01505-AAAB-TCZZA Issue: 01 43A 7A 28A 42A 66A 7A 28A 43A 66A 3A 1A 7A 1A 7A 3A 32A 32A 32A 3A 1A 7A 1A 7A 3A 1A 3A 3A 1A 3A 1A 7A 3A 7A 1A 3A 7A 1A 3A 1A 7A 3A 1A 3A 7A 1A 106 107 108 109 110 111 112 113 114 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

(1 of 2) Nokia FastMile 4G Receiver Product Overview Performance information Index Downlink Uplink PCC SCC1 SCC2 SCC3 PCC SCC1 SCC2 1A 3A 1A 7A 3A 7A 1A 3A 3A 1A 1A 3A 1A 7A 3A 7A 32A 32A 32A 32A 32A 32A 32A 32A 32A 3A 1A 3A 3A 1A 7A 3A 7A 1A 3A 1A 7A 1A 7A 7A 1A 7A 3A 3A 3A 7A 1A 7A 1A 3A 1A 7A 3A 7A 1A 3A 3A 7A 1A 7A 1A 3A 7A 1A 3A 1A 7A 3A 7A 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

(2 of 2) 1A 7A 3A 7A 1A 3A 1A 3A 3A 1A 3A 3A 1A 7A 3A 7A 1A 3A 1A 3A 3A 1A 3A 3A 1A 1A 32A 32A 32A 32A 32A 7A 7A 7A 1A 7A 1A 32A 32A 32A 32A 32A 32A 7A 7A 1A 7A 7A 7A 1A 7A 3A 12.4 Power consumption information Table 26 provides power consumption information for all models of the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 91 Performance information Nokia FastMile 4G Receiver Product Overview Table 26 Power consumption information for all models Condition Idle power Maximum power consumption Power consumption 10 W 1.6 W 92 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app 13 Management using the Nokia Wireless app 13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver 13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller 13.3 Using the Nokia Wireless app to manage a unit managed by an ACS 13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver After the Nokia FastMile 4G Receiver has been installed as described in the installation guide, you can use the Nokia Wireless app to perform management activities on it, such as viewing information, uploading CA certificates, rebooting the Nokia FastMile 4G Receiver, or resetting to factory settings. The user of the Nokia Wireless app has to agree with the Terms of Service and the Nokia Privacy Policy that define the app. This is a mandatory step during the first start up of the app. Terms of Service can be found inside the Nokia Wireless app whereas a link is provided to the Nokia Privacy Policy, which is described in the Nokia public webpage. The user can find this information later on by visiting the About screen of the app. Figure 27 shows the Before we begin screen that provides access to the Terms of Service and the Nokia Privacy Policy. Issue: 01 3TG-01505-AAAB-TCZZA 93 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 27 Before we begin screen Figure 28 shows the Terms of Service screen that is accessed through the Before we begin screen. 94 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 28 Terms of Service screen The Nokia Wireless app is protected as much as possible against malicious users. Tools like obfuscation and encryption used by the Nokia Wireless app, as well as runtime checks and tamper detection, make it hard for malicious users to understand the code flow or to hack the application. There are some differences in managing the Nokia FastMile 4G Receiver through the Nokia Wireless app depending on whether the Nokia FastMile 4G Receiver is managed remotely by the Nokia Altiplano FastMile Controller (through NETCONF) or by an ACS (through TR-069):

if the Nokia Altiplano FastMile Controller is being used for remote management of the Nokia FastMile 4G Receiver (through NETCONF), see section 13.2 if an ACS is being used for remote management of the Nokia FastMile 4G Receiver (through TR-069), see section 13.3 Issue: 01 3TG-01505-AAAB-TCZZA 95 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview 13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller If the Nokia Altiplano FastMile Controller is being used for remote management of the Nokia FastMile 4G Receiver (through NETCONF), you can use the Nokia Wireless app to perform management activities on it, such as viewing information, uploading CA certificates, rebooting the Nokia FastMile 4G Receiver, or resetting to factory settings, as described in the following procedure. Note The NETCONF version of the FastMile 4G Receiver for remote management from the Nokia Altiplano FastMile Controller is not supported from FastMile 4G Release 2.0.03a onwards. You will need the QR code that was saved as described during installation the Nokia FastMile 4G Receiver in order to scan it when logging in to it through the Nokia Wireless app. Logging in to the Nokia FastMile 4G Receiver also includes the following:

initiating a Bluetooth connection enabling Bluetooth allowing the Bluetooth pairing request establishing the VPN connection entering the username and password Note The Bluetooth connection from the Nokia Wireless app towards the Nokia FastMile 4G Receiver is closed after one hour of inactivity in order to preserve Nokia Wireless phone resources. There is a mechanism in place that enables the user to re-establish the Bluetooth connection when he or she re-enters the app. Procedure 5 To perform management activities Use the following procedure to perform management activities through the Nokia Wireless app for a Nokia FastMile 4G Receiver that is managed remotely by the Nokia Altiplano FastMile Controller through NETCONF. 1 When you are close to the Nokia FastMile 4G Receiver, connect the mobile phone to the Internet and open the Nokia Wireless app on the phone. An introductory screen with a video appears. Figure 29 shows the introductory screen. 96 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 29 Introductory screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF Continue by tapping on Get started. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the Bluetooth MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver. The QR code was provided on a sheet of paper in the shipping package of the Nokia FastMile 4G Receiver. The sheet of paper, or a photograph of it, should have been saved and made available for anyone who later needs to scan the QR code when accessing the Nokia FastMile 4G Receiver. Figure 30 shows the screen for the prompt to scan the QR code. Issue: 01 3TG-01505-AAAB-TCZZA 97 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 30 Screen with prompt to scan the QR code for unit managed by the Nokia Altiplano FastMile Controller through NETCONF Tap on Scan to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 31 shows the QR code screen. 98 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 31 QR code screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF 3 The Nokia Wireless app displays the screen to install the Nokia FastMile 4G Receiver. Tap on the Already Installed? option. Figure 32 shows the Already Installed option. Issue: 01 3TG-01505-AAAB-TCZZA 99 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 32 Screen showing the Already Installed option for unit managed by the Nokia Altiplano FastMile Controller through NETCONF 4 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through Bluetooth in conjunction with a VPN. You will need to be close to the Nokia FastMile 4G Receiver and you will need to have Bluetooth enabled on the mobile phone and accept the pairing request when it appears. Figure 33 shows the screen to connect to the Nokia FastMile 4G Receiver. 100 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 33 Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on Connect. 5 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 34 shows the screen to enable the VPN profile. Issue: 01 3TG-01505-AAAB-TCZZA 101 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 34 Screen for enabling the VPN profile Enable the VPN profile by tapping on Connect. 6 The android system of the mobile phone prompts you to accept the connection request. Figure 35 shows the prompt to accept the connection request. 102 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 35 Prompt for accepting the connection request Accept the connection request by tapping on OK. 7 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 36 shows the screen to log in to the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 103 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 36 Screen to log in to a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Log in to the Nokia FastMile 4G Receiver by tapping on Log in. After you have logged in, you can:

view information for the Nokia FastMile 4G Receiver: see step 8 upload updated certificates to the Nokia FastMile 4G Receiver: see step 9 reboot the Nokia FastMile 4G Receiver: see step 10 change the configuration settings to the default factory load settings (Perform Factory Reset); see step 11 104 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app 8 You can view the following information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller by selecting the Connection Status option of the main screen and scrolling through the screen by swiping up or down:

LTE cell info:

connection state: Does the Nokia FastMile 4G Receiver connect to this cell status: The current operational state of the PDN connection EARFCN: The carrier frequency in the uplink and downlink is designated by the E-UTRA. Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535. PCI: The physical cellid of cell Current signal stats:

RSRP: RSRP (Reference Signals Received Power) is a measurement of the received power level in an LTE cell network in dBm RSRQ: RSRQ (Reference Signals Received Quality) is a measurement of the received power quality in an LTE cell network in dB RSSI: RSSI (Received Signal Strength Indicator) is a measurement of the power present in a received radio signal by the Nokia FastMile 4G Receiver SINR: SINR (the Signal-to-Interference-plus-Noise ratio) is used in the LTE network from the Nokia FastMile 4G Receiver side to measure the quality of wireless connections in dB Average signal stats:

RSRP: average value of Reference Signal Received Power (dBm) in the measured RSRQ: average value of Reference Signal Received Quality (dB) in the measured RSSI: average value of Received Signal Strength indicator (dBm) in the measured interval, resolution 1dBm interval, resolution 1dB interval, resolution 1 SINR: average value of Signal-to-Interference-plus-Noise Ratio (dB) in the measured interval, resolution 1dB Other stats:

bytes sent: the total number of bytes sent on the interface bytes received: the total number of bytes received on the interface Figure 37 shows an example of the System state screen. Issue: 01 3TG-01505-AAAB-TCZZA 105 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 37 System state screen example for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Note The Nokia Wireless app will display a value of N/A for parameters that are not supported by the installed Home 4G Receiver Software version. The following additional Beam Angle information is displayed only for an ABA version as shown in Figure 38:

Antenna mode: wide or narrow Horizontal angle: the horizontal angle is expressed as a degree if the Antenna mode is narrow or as N/A if the antenna mode is wide 106 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 38 System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller 9 You can upload updated certificates (stored under downloads in the mobile phone's directory) to the Nokia FastMile 4G Receiver. i Tap on the Upload CA certificates option. Figure 39 shows the screen that has the Upload CA certificates option. Issue: 01 3TG-01505-AAAB-TCZZA 107 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 39 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ii Select the required CA certificates and tap on Ok. Note that the certificates must be in the download folder of the mobile phone before you can upload them to the Nokia FastMile 4G Receiver. Figure 40 shows the screen that lists the CA certificates. 108 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 40 Screen that lists the CA certificates for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The following CA certificates are supported for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller:

pmaCA.pem (used for authenticating the Nokia Altiplano FastMile Controller) logserverCA.pem (used for authenticating the log server) swserverCA.pem (used for authenticating the software upgrade server) diagserverCA.pem (used for authenticating the optional diagnostics server) iii Figure 41 shows the screen that indicates that uploading of the CA certificates was successful. Issue: 01 3TG-01505-AAAB-TCZZA 109 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 41 Screen indicating that uploading of the CA certificates was successful for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Tap on Ok to clear the message. 10 You can reboot a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller through NETCONF by tapping on the Reboot Device option. Figure 42 shows the Reboot Device option. 110 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 42 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The screen shows the reboot message indicating that the Bluetooth connection will be interrupted and that you will be disconnected. Figure 43 shows the screen that has the reboot message. Issue: 01 3TG-01505-AAAB-TCZZA 111 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 43 Screen showing the reboot message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Press the Reboot option if you want to proceed with the reboot, or press the Cancel option. If you pressed the Reboot option, press OK. 11 You can change the configuration settings for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller through NETCONF to the default factory load settings by tapping on the Perform Factory Reset option. Figure 44 shows the Perform Factory Reset option. 112 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 44 Screen showing the Perform Factory Reset option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The screen shows the factory reset message indicating that the factory reset will reset the device back to factory settings and that all changes will be lost and that you will be disconnected. Figure 45 shows the screen that has the factory reset message. Issue: 01 3TG-01505-AAAB-TCZZA 113 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 45 Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Press the Reset option if you want to proceed with the reset to factory settings, or press the Cancel option. If you pressed the Reset option, press OK. 13.3 Using the Nokia Wireless app to manage a unit managed by an ACS If an ACS is being used for remote management of the Nokia FastMile 4G Receiver

(through TR-069), you can use the Nokia Wireless app to perform management activities on the Nokia FastMile 4G Receiver after it has been installed, such as viewing information, uploading CA certificates, rebooting, or resetting to factory settings, as described in the following procedure. 114 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app This procedure does not involve use of the Nokia Altiplano FastMile Controller. You will need the QR code that was saved as described during installation of the Nokia FastMile 4G Receiver in order to scan it when logging in to the 4G Receiver through the Nokia Wireless app. Logging in to the Nokia FastMile 4G Receiver also includes the following:

initiating a Bluetooth connection enabling Bluetooth allowing the Bluetooth pairing request establishing the VPN connection entering the username and password Note The Bluetooth connection from the Nokia Wireless app towards the Nokia FastMile 4G Receiver is closed after one hour of inactivity in order to preserve Nokia Wireless phone resources. There is a mechanism in place that enables the user to re-establish the Bluetooth connection when he or she re-enters the app. Procedure 6 To perform management activities Use the following procedure to use the Nokia Wireless app to perform management activities for a Nokia FastMile 4G Receiver that is managed remotely by an ACS through TR-069. 1 When you are close to the Nokia FastMile 4G Receiver, connect the mobile phone to the Internet and open the Nokia Wireless app on the phone. An introductory screen with a video appears. Figure 46 shows the introductory screen. Issue: 01 3TG-01505-AAAB-TCZZA 115 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 46 Introductory screen for unit managed by an ACS through TR-069 Continue by tapping on Get started. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the Bluetooth MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver. The QR code was provided on a sheet of paper in the shipping package of the Nokia FastMile 4G Receiver. The sheet of paper, or a photograph of it, should have been saved and made available for anyone who later needs to scan the QR code when accessing the Nokia FastMile 4G Receiver. Figure 47 shows the screen for the prompt to scan the QR code. 116 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 47 Screen with prompt to scan the QR code for unit managed by an ACS through TR-069 The Nokia Wireless app also provides a way to manually enter all the needed information in order to proceed with the installation without scanning a QR code. Tap on Scan to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 48 shows the QR code screen. Issue: 01 3TG-01505-AAAB-TCZZA 117 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 48 QR code screen for unit managed by an ACS through TR-069 3 The Nokia Wireless app displays the screen to install the Nokia FastMile 4G Receiver. Tap on the Already Installed? option. Figure 49 shows the Already Installed option. 118 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 49 Screen showing the Already Installed option for unit managed by an ACS through TR-069 4 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through Bluetooth in conjunction with a VPN. You will need to be close to the Nokia FastMile 4G Receiver and you will need to have Bluetooth enabled on the mobile phone and accept the pairing request when it appears. Figure 50 shows the screen to connect to the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 119 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 50 Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on Connect. 5 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 51 shows the screen to enable the VPN profile. 120 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 51 Screen for enabling the VPN profile Enable the VPN profile by tapping on Connect. 6 The android system of the mobile phone prompts you to accept the connection request. Figure 52 shows the prompt to accept the connection request. Issue: 01 3TG-01505-AAAB-TCZZA 121 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 52 Prompt for accepting the connection request Accept the connection request by tapping on OK. 7 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 53 shows the screen to log in to the Nokia FastMile 4G Receiver. 122 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 53 Screen to log in to a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Log in to the Nokia FastMile 4G Receiver by tapping on Log in. After you have logged in, you can:

view information for the Nokia FastMile 4G Receiver: see step 8 upload updated certificates to the Nokia FastMile 4G Receiver: see step 9 reboot the Nokia FastMile 4G Receiver: see step 10 change the configuration settings to the default factory load settings (Perform Factory Reset); see step 11 Issue: 01 3TG-01505-AAAB-TCZZA 123 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview 8 You can view the following information for a Nokia FastMile 4G Receiver managed by an ACS by selecting the Connection Status option of the main screen and scrolling through the screen by swiping up or down:

LTE cell info:

connection state: Does the Nokia FastMile 4G Receiver connect to this cell status: The current operational state of the PDN connection EARFCN: The carrier frequency in the uplink and downlink is designated by the E-UTRA. Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535. PCI: The physical cellid of cell Current signal stats:

RSRP: RSRP (Reference Signals Received Power) is a measurement of the received power level in an LTE cell network in dBm RSRQ: RSRQ (Reference Signals Received Quality) is a measurement of the received power quality in an LTE cell network expressed as a ratio RSSI: RSSI (Received Signal Strength Indicator) is a measurement of the power present in a received radio signal by the Nokia FastMile 4G Receiver in dBm SINR: SINR (the Signal-to-Interference-plus-Noise ratio) is used in the LTE network from the Nokia FastMile 4G Receiver side to measure the quality of wireless connections in dB Other stats:

bytes sent: the total number of bytes sent on the interface bytes received: the total number of bytes received on the interface Figure 54 shows an example of the System state screen. 124 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 54 System state screen example for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Note The Nokia Wireless app will display a value of N/A for parameters that are not supported by the installed Home 4G Receiver Software version. The following additional Beam Angle information is displayed only for an ABA version as shown in Figure 55:

Antenna mode: wide or narrow Horizontal angle: the horizontal angle is expressed as a degree if the Antenna mode is narrow or as N/A if the antenna mode is wide Issue: 01 3TG-01505-AAAB-TCZZA 125 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 55 System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 126 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app 9 You can upload updated certificates (stored under downloads in the mobile phone's directory) to the Nokia FastMile 4G Receiver. i Tap on the Upload CA certificates option, as shown in Figure 56. Figure 56 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 ii Tap on Upload on the Upload CA Certificates screen, as shown in Figure 57. Issue: 01 3TG-01505-AAAB-TCZZA 127 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 57 Upload CA Certificates screen for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 A list of CA certificates appears, as shown in Figure 58. 128 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 58 List of CA certificates displayed on the Upload CA Certificates screen for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 iii Select the required CA certificates and tap on Ok. Note that the certificates must be in the download folder of the mobile phone before you can upload them to the Nokia FastMile 4G Receiver. Issue: 01 3TG-01505-AAAB-TCZZA 129 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview The following CA certificates are supported for a Nokia FastMile 4G Receiver Nokia FastMile 4G Receiver managed by an ACS:

pmaCA.pem (used for authenticating the Nokia Altiplano FastMile Controller) logserverCA.pem (used for authenticating the log server) swserverCA.pem (used for authenticating the software upgrade server) diagserverCA.pem (used for authenticating the optional diagnostics server) acsCA.pem (used for authenticating the ACS) iv The screen indicates when uploading of the CA certificates was successful, as shown in Figure 59. 130 3TG-01505-AAAB-TCZZA Issue: 01

Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 59 Screen showing that upload of CA certificates was successful for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 10 You can reboot a Nokia FastMile 4G Receiver managed by an ACS through TR-069 by Tap on Ok to clear the message. tapping on the Reboot Device option. Figure 60 shows the Reboot Device option. Issue: 01 3TG-01505-AAAB-TCZZA 131 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 60 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 When you reboot the Nokia FastMile 4G Receiver, the screen shows the reboot message indicating that the Bluetooth connection will be interrupted and that you will be disconnected. Press the Reboot option if you want to proceed with the reboot, or press the Cancel option. If you pressed the Reboot option, press OK. 11 You can change the configuration settings for a Nokia FastMile 4G Receiver managed by an ACS through TR-069 to the default factory load settings by tapping on the Perform Factory Reset option. Figure 61 shows the Perform Factory Reset option. 132 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 61 Screen showing the Perform Factory Reset option for a Nokia FastMile 4G Receiver managed by ACS through TR-069 The screen shows the factory reset message indicating that the factory reset will reset the device back to factory settings and that all changes will be lost and that you will be disconnected. Figure 62 shows the screen that has the factory reset message. Issue: 01 3TG-01505-AAAB-TCZZA 133 Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 62 Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by ACS through TR-069 Press the Reset option if you want to proceed with the reset to factory settings, or press the Cancel option. If you pressed the Reset option, press OK. 134 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI 14 Management using the Web UI 14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver 14.2 Using the Web UI status screen 14.3 Using the Web UI network screen 14.4 Using the Web UI CBRS screen 14.5 Using the Web UI system screen 14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver After the Nokia FastMile 4G Receiver has been installed, you can use the Web UI to perform some management-type activities on a Nokia FastMile 4G Receiver that is managed by an ACS through TR-069. See section 6.1.2 for more information about the Web UI. The Web UI provides the following screens to provide support for management of the Nokia FastMile 4G Receiver:

Note Most of the screens require login. See the Customer Release Notes for Web UI considerations and limitations, including username information for the types of accounts supported by the Web UI. Default passwords for the accounts will be delivered during commissioning. The default passwords can be set in pre-configuration file (either customers provide it or use default ones from Nokia). The Web UI passwords can be managed later on through the ACS. Status screen: allows viewing of FastMile 4G Receiver status parameter values

(login is not required), see section 14.2 Network screen: allows configuration of specific FastMile 4G Receiver parameters (login is required), see section 14.3 CBRS screen: offers the possibility to display CBSD parameters of the FastMile 4G Receiver, as well as to input registration information for CPI's usage (login is required), see section 14.4 System screen: allows performing of advanced system actions (login is required), see section 14.5 Issue: 01 3TG-01505-AAAB-TCZZA 135 Management using the Web UI Nokia FastMile 4G Receiver Product Overview 14.2 Using the Web UI status screen The Web UI status screen allows you to view FastMile 4G Receiver status parameters. No login is required. The following parameters are shown:

The Cell ID for primary attached cell The primary attached cell physical cell ID (PCI), eNodeB ID (eNBID), DL EARFCN and the Band The secondary attached cells physical cell ID (PCI) and DL EARFCN Secondary Component Carrier Band (Downlink) Secondary Component Carrier Band (Uplink) The Signal Strength of the attached cell: this animated model shows the RSRP

(Reference Signals Received Power) of the attached cell The RSRP (Reference Signals Received Power) of the attached primary and The RSRQ (Reference Signal Received Quality) of the attached primary and The RSSI (Received Signal Strength Indication) of the attached primary and The CINR (Carrier to Interference plus Noise Ratio) of the attached primary and The SINR (Signal to Interference and Noise Ratio) of the attached primary cell Total number of MB sent on the LTE interface since last FastMile 4G Receiver Total number of MB received on the LTE interface since last FastMile 4G Total number of MB sent on the Ethernet interface since last FastMile 4G secondary cells secondary cells secondary cells secondary cells restart Receiver restart Receiver restart Total number of MB received on the Ethernet interface since last FastMile 4G Receiver restart Data Model (TR-069) Software Version Name retrieved from network and the corresponding IP address of the configured Access Points Device Info table with information regarding the IMSI, IMEI, Ethernet MAC Address, Serial Number and the Model Name 136 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI You can display available cell information by triggering measurements using the Trigger measurement button on the Web UI status screen. Available cell information includes: physical cell ID, DL EARFCN, SINR, RSRP, RSRQ, RSSI. Note the following up to 12 available cells are shown, ranked from strongest to weakest by RSRP After approximately five seconds from triggering of measurements, the FastMile 4G Receiver will detach from the carriers network. Push the measurements status refresh button while the FastMile 4G Receiver is detached to see the grayed-out Web UI status screen. Reattachment of the FastMile 4G Receiver may take from several seconds to up to five minutes. You will need to refresh the browser for updated Web UI status screen contents after reattachment of the FastMile 4G Receiver. available cell information will not be visible after rebooting the FastMile 4G Receiver Figure 63 shows an example of the top part of the Status screen when the FastMile 4G Receiver is not connected to a cell. Figure 63 Example of the top part of the Status screen when the FastMile 4G Receiver is not connected to a cell Figure 64 shows the lower part after scrolling down of an example of the Status screen without available cells when the FastMile 4G Receiver is not connected to a cell. Issue: 01 3TG-01505-AAAB-TCZZA 137 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 64 Example of the lower part of the Status screen without available cells when the FastMile 4G Receiver is not connected to a cell Figure 65 shows the lower part after scrolling down of an example of the Status screen with available cells when the FastMile 4G Receiver is not connected to a cell. Figure 65 Example of the lower part of the Status screen with available cells when the FastMile 4G Receiver is not connected to a cell Figure 66 shows the top part of an example of the Status screen when the FastMile 4G Receiver is connected to a cell. 138 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 66 Example of the top part of the Status screen when the FastMile 4G Receiver is connected to a cell Figure 67 shows a lower part after scrolling down of an example of the Status screen when the FastMile 4G Receiver is connected to a cell. The figure shows the trigger measurement button that can be used to display information about available cells. Figure 67 Example of a lower part of the Status screen when the FastMile 4G Receiver is connected to a cell To display available cell information, select the trigger measurement button on the Status screen. Figure 68 shows the pop up window that appears when the trigger measurement button is selected. Issue: 01 3TG-01505-AAAB-TCZZA 139 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 68 Example of the Trigger Measurement pop up window You can proceed or cancel the trigger measurement action. Note After approximately five seconds from triggering of measurements, the FastMile 4G Receiver will detach from the carriers network. Push the measurements status refresh button while the FastMile 4G Receiver is detached to see the grayed-out Web UI status screen. Reattachment of the FastMile 4G Receiver may take from several seconds to up to five minutes. You will need to refresh the browser for updated Web UI status screen contents after reattachment of the FastMile 4G Receiver. The following figures show examples of screens involved in the trigger measurement action:

Figure 69 shows trigger measurement that is ongoing Figure 70 shows trigger measurement that has completed with a list of available cells and the FastMile 4G Receiver is detached from the carrier's network Figure 71 shows trigger measurement that has completed and the FastMile 4G Receiver is reattached to the carrier's network Figure 69 Example of ongoing Trigger Measurement 140 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 70 Example of Trigger Measurement completed and FastMile 4G Receiver is detached Figure 71 Example of Trigger Measurement completed and FastMile 4G Receiver is reattached Figure 72 shows the lowest part after scrolling down of an example of the Status screen when the FastMile 4G Receiver is connected to a cell. Figure 72 Example of the lowest part of the Status screen when the FastMile 4G Receiver is connected to a cell Issue: 01 3TG-01505-AAAB-TCZZA 141 Management using the Web UI Nokia FastMile 4G Receiver Product Overview 14.3 Using the Web UI network screen The Web UI network screen allows you to perform FastMile4G Receiver configuration actions. Login is required. For details on the Web UI login, please refer to the Customer Release Notes. The following configuration capabilities are supported:

Configuration of ACS URL Configuration of ACS username Configuration of ACS password Configuration of Connection Request Port Configuration of Connection Request Username Configuration of Connection Request Password Configuration of Periodic Inform Interval Configuration of Periodic Inform Request Setting of location; that is, geocoordinates (latitude and longitude) Configuration of Access Points (up to one default AP in router mode and up to four APs in bridge mode; a total of five APs can be configured). AP configuration includes configuration of:

AP name (If the default AP name is set to EmptyAPN, the auto APN feature is enabled) forwarding mode (router or bridge) Username Password Authentication mode VLAN MTU size Note that the default AP cannot be deleted subnet mask Configuration of cell list (up to nine cells can be configured) Configuration of the DHCP server for router mode Uploading of CA certificates Note CA certificates must be pre-downloaded to the laptop so that they can be browsed and found via the 'Upload Certificate' action. The CA Certificates must comply to the naming rules required by the FastMile 4G Receiver. The following CA certificates are supported:

logserverCA.pem (used for authenticating the log server) swserverCA.pem (used for authenticating the software upgrade server) 142 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI diagserverCA.pem (used for authenticating the optional diagnostics server) acsCA.pem (used for authenticating the ACS) Note Auto refresh of web UI screens is not supported, so it is recommended that you refresh the Web UI network screen to avoid retrieving outdated information if any database changes have been done since the last retrieval of information. Figure 73 shows an example of the Login screen. Figure 73 Example of the Login screen Figure 74 shows an example of the Network screen. Issue: 01 3TG-01505-AAAB-TCZZA 143 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 74 Example of the Network screen Figure 75 shows an example of scroll down for the Network screen. Figure 75 Example of scroll down for the Network screen Figure 76 shows an example of the Add Access Point window. 144 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 76 Example of the Add Access Point window Figure 77 shows an example of the Delete Access Point window Issue: 01 3TG-01505-AAAB-TCZZA 145 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 77 Example of the Delete Access Point window Figure 78 shows an example of the Edit Location window. 146 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 78 Example of the Edit Location window Figure 79 shows an example of the Edit Controller window. Figure 79 Example of the Edit Controller window Figure 80 shows an example of the Edit Connection Request window. Issue: 01 3TG-01505-AAAB-TCZZA 147 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 80 Example of the Edit Connection Request window Figure 81 shows an example of the Edit DHCP window. 148 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 81 Example of the Edit DHCP window Figure 82 shows an example of the Certificates information window that opens when you click on Upload Certificate. Issue: 01 3TG-01505-AAAB-TCZZA 149 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 82 Example of the Certificates information window Figure 83 shows an example of the Add Cell window. Figure 83 Example of the Add Cell window Figure 84 shows an example of the Delete Cell window. 150 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 84 Example of the Delete Cell window 14.4 Using the Web UI CBRS screen The Web UI CBRS (Citizens Broadband Radio Service) screen is intended for the US market and offers the possibility to display CBSD (Citizens Broadband Radio Service Device) parameters of the FastMile 4G Receiver, as well as to input registration information for CPI's (Certified Professional Installer) usage. Login is required. For details on the Web UI login, please refer to the Customer Release Notes. The Web UI CBRS screen allows you to view the following FastMile 4G Receiver CBSD parameters:

FCC (Federal Communications Commission) ID CBSD (Citizens Broadband Radio Service Device) Category Air interface Measurement Capability CBSD Registration CBSD Grant (if applicable; maximum of four):

Grant ID Grant Status High Frequency Low Frequency Additionally, the Web UI CBRS screen allows you to input the following parameters:

User ID (UR_ID) CBRS Root CA file CRL (Certificate Revocation List) file SAS SERVER CRL (Certificate Revocation List) URL list (maximum of five) Figure 85 and Figure 86 show examples of the Web UI CBRS screen. Issue: 01 3TG-01505-AAAB-TCZZA 151 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 85 Example of the Web UI CBRS screen with no CBSD Grants Figure 86 Example of the Web UI CBRS screen with three CBSD Grants 14.5 Using the Web UI system screen The Web UI system screen allows you to perform advanced system actions on the FastMile 4G Receiver. Login is required. For details on the Web UI login, please refer to the Customer Release Notes. 152 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI The following advanced system capabilities are supported:

Restart device: the FastMile 4G Receiver configuration remains intact Restore factory settings: factory configuration of the FastMile 4G Receiver is used; subsequent configuration is lost Upgrade firmware:

before doing any firmware upgrade action, make sure that the upgrade path from the existing firmware to new firmware is supported by the FastMile 4G Receiver new image is installed in the FastMile 4G Receiver; the FastMile 4G Receiver configuration remains intact note that the FastMile 4G Receiver will reboot if the firmware upgrade fails Enable/disable LAN SSH access (by default LAN SSH access is enabled) Enable/disable WAN SSH access (by default WAN SSH access is disabled) Figure 87 shows an example of the System screen. Figure 87 Example of the System screen Figure 88 shows an example of the Restart Device confirmation window. Issue: 01 3TG-01505-AAAB-TCZZA 153 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 88 Example of the Restart Device confirmation window Figure 89 shows an example of the Restore Device confirmation window used to restore the device to factory settings. 154 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 89 Example of the Restore Device confirmation window Figure 90 shows an example of the screen that displays while firmware is being uploaded. Issue: 01 3TG-01505-AAAB-TCZZA 155 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 90 Example of the screen that displays while firmware is being uploaded Figure 91 shows an example of the screen that displays while firmware is being upgraded. 156 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 91 Example of the screen that displays while firmware is being upgraded Figure 92 shows an example of the screen that displays while the system is being rebooted. Issue: 01 3TG-01505-AAAB-TCZZA 157 Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 92 Example of the screen that displays while the system is being rebooted 158 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Standards certification 15 Standards certification 15.1 Standards certification for the Nokia FastMile 4G Receiver 15.1 Standards certification for the Nokia FastMile 4G Receiver Table 27 provides standards certification information for all models of the Nokia FastMile 4G Receiver. Table 27 Standards certifications for the Nokia FastMile 4G Receiver Category Standard Certifications FCC FCC Part 47 4G01-A with B48 and Bluetooth 3.0 4G01-C with B48 and Bluetooth 4.2 4G03-A with B7\B41 and Bluetooth 3.0 4G05-A with B41 and Bluetooth 3.0 4G06-A with B2\B25\B4\B66\B7\B48 and Bluetooth 3.0 RSS series 4G01-B with B48 and Bluetooth 3.0 UL/CSA 62368-1 4G01-A\4G01-B\4G01-C\4G03-A\4G05-A\4G06-A Directive 2014/53/EU as following standards:

4G01-A with B42\B43 and Bluetooth 3.0 4G02-A with B3 and Bluetooth 3.0 4G03-A with B7\B38\B40 and Bluetooth 3.0 4G04-A with B3\B7\B20\B32 and Bluetooth 3.0 4G05-A with B1\B3\B7\B20\B28\B38\B40 and Bluetooth 3.0 4G05-B with B1\B3\B7\B20\B28\B38\B40 and Bluetooth 3.0 4G06-A with B7\B28\B42B43 and Bluetooth 3.0 4G17-A with B1\B3\B7\B20\B32 and Bluetooth 3.0 CB 4G01-A\4G02-A\4G03-A\4G04-A\4G05-A\4G05-B\4G06-A\4G17-A UL 50E CSA C22.2 NO.94 UL/CSA 60950-22 ETSI EN 301 489-1\17\52 EN 301908-1\13 ETSI EN 300 328 Directive 2014/35/EU as following standards:

EN/IEC 62368-1 EN/IEC 60950-22 ISED ETL CE RoHS Directive 2011/65/EU and as amended All models and types See chapter 18 for FCC statements and label instructions. Issue: 01 3TG-01505-AAAB-TCZZA 159 Standards certification Nokia FastMile 4G Receiver Product Overview 160 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Appendix A: Specifications 16 Appendix A: Specifications 16.1 Specifications 16.1 Specifications Table 28 provides some specifications for the Nokia FastMile 4G Receiver. Table 28 Specifications for the Nokia FastMile 4G Receiver Item Dimensions Description Weight Power consumption Operating altitude Non-operating altitude Operating temperature Compact multi-band models: 22.7 cm by 22.7 cm by 6.4 cm

(8.94 in by 8.94 in by 2.52 in) Compact mono-band models: 23.5 cm by 23.5 cm by 5.2 cm

(9.3 in by 9.3 in by 2 in) ABA models: 31.8 cm by 31.8 cm by 5.6 cm (12.5 in by 12.5 in by 2.2 in) High gain CBRS model: 31.8 cm by 31.8 cm by 7.0 cm (12.5 in by 12.5 in by 2.8 in) Compact multi-band models: 0.88 kg (1.9 lb) Compact mono-band models: 1.3 kg (2.9 lb) ABA models: 2 kg (4.4. lb) High gain CBRS model: less than 1.5 kg (3.3 lb) Maximum: 10 W Idle: 1.6 W Maximum operating altitude is 3048 m (10 000 ft) above mean sea level Maximum non-operating altitude is 12 192 m (40 000 ft) above mean sea level Compact mono-band and ABA models:

30C to 65C (22F to 149F) Compact multi-band models and High gain CBRS model:

Model 4G05-B: 40C to 55C (40F to 131F) High gain CBRS model and compact multi-band models other than Model 4G05-B: 30C to 55C (22F to 131F) Storage temperature 40C to 85C (85F to 185F) Humidity IP rating 5% to 95% non condensing IP66 TYPE3 Issue: 01 3TG-01505-AAAB-TCZZA 161 Appendix A: Specifications Nokia FastMile 4G Receiver Product Overview 162 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Appendix B: RF exposure 17 Appendix B: RF exposure 17.1 RF exposure 17.1 RF exposure The international standards used for the assessment of this device provide simple conformity assessment methods for low power electronic and electrical equipment to an exposure limit relevant to electromagnetic fields (EMF). Table 29 indicates RF exposure distances for each model for:

CE based on the compliance criteria for maximum permissible exposure as in CE Council Recommendation Directive 2014/53/EU FCC based on the compliance criteria for maximum permissible exposure as in FCC 47 Table 29 RF exposure distances Model 4G01-A 4G01-B 4G01-C 4G02-A 4G03-A 4G04-A 4G05-A 4G05-B 4G06-A 4G17-A RF exposure distance CE FCC 50 cm (19.69 in) 20 cm (7.87 in) 50 cm (19.69 in) 50 cm (19.69 in) N/A 50 cm (19.69 in) 50 cm (19.69 in) N/A 50 cm (19.69 in) 50 cm (19.69 in) 20 cm (7.87 in) 20 cm (7.87 in) 20 cm (7.87 in) 20 cm (7.87 in) N/A N/A 20 cm (7.87 in) 23 cm (9.06 in) 20 cm (7.87 in) N/A Issue: 01 3TG-01505-AAAB-TCZZA 163 Appendix B: RF exposure Nokia FastMile 4G Receiver Product Overview 164 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Appendix C: FCC statements and label instructions 18 Appendix C: FCC statements and 18.1 FCC compliance statement Table 30 provides the FCC ID for applicable models of the Nokia FastMile 4G Receiver. Table 30 FCC ID for applicable models of the Nokia FastMile 4G Receiver label instructions 18.1 FCC compliance statement 18.2 FCC radiation exposure statement 18.3 FCC label instructions Model 4G01-A 4G01-B 4G01-C 4G03-A 4G05-A 4G06-A FCC ID 2ADZR34003800FM20 2ADZR34003800FM201 2ADZR4G01C 2ADZR23002690FM20 2ADZR4G05A 2ADZR4G06A Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any interference received, including Interference that may cause undesired operation. 18.2 FCC radiation exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distances indicated in chapter 17 between the radiator and your body. Issue: 01 3TG-01505-AAAB-TCZZA 165 Appendix C: FCC statements and label instructions Nokia FastMile 4G Receiver Product Overview 18.3 FCC label instructions The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as:

Contains Transmitter Module FCC ID: 2ADZR4G04A and 2ADZR4G05A. Any similar wording that expresses the same meaning may be used. 166 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Glossary 19 Glossary This glossary provides the expansions and optional descriptions of most acronyms and initialisms that appear in this document. 3rd Generation Partnership Project Automated Beam Alignment Auto Configuration Server American National Standards Institute Access Point Access Point Name Certificate Authority or Carrier Aggregation Citizens Band Radio Service China Restriction of Hazardous Substances Downlink Differentiated Services Code Point Device Unique Identifier External Call Interface Evolved Packet Core Electronic Information Products Electromagnetic Compatibility Electromagnetic Interference Evolved Packet Core Electrostatic Discharge Electrotechnical Laboratory European Telecommunications Standards Institute Federal Communications Commission Frequency Division Duplex EARFCN E-UTRA Absolute Radio Frequency Channel Number E-UTRA Evolved Universal Terrestrial Radio Access 3GPP ABA ACS ANSI AP APN CA CBRS CRoHS DL DSCP DUID ECI EPC EIP EMC EMI EPC ESD ETL ETSI FCC FDD Issue: 01 3TG-01505-AAAB-TCZZA 167 Glossary Nokia FastMile 4G Receiver Product Overview Maximum Concentration Value or Minimum Concentration Value FM HSS IEEE IP IPTV LAN LED LTE MAC MCV MIMO MME NAC NEC OAM PCI PCRF PDF PIN PoE QCI QoS QR RF RoHS RSRP RSRQ RSSI FastMile Home Subscriber Server Institute of Electrical and Electronics Engineers International Protection or Internet Protocol Internet Protocol over Television Local Area Network Light Emitting Diode Long-Term Evolution Media Access Control Multiple-Input Multiple-Output Mobility Management Entity Network Access Control National Electrical Code Operations and Maintenance Physical Cell Identifier Policy and Charging Rules Function Portable Document Format Personal Identification Number Power over Ethernet QoS Class Identifier Quality of Service Quick Response Radio Frequency Restriction of Hazardous Substances Reference Signal Received Power Reference Signal Received Quality Received Signal Strength Indicator 168 3TG-01505-AAAB-TCZZA Issue: 01 Nokia FastMile 4G Receiver Product Overview Glossary SIM SINR TCP TDD UDP UL URL VDC VoIP VPN WiFi Subscriber Identify Module Signal-to-Interference-plus-Noise Ratio Transmission Control Protocol Time Division Duplex User Datagram Protocol Underwriters Laboratories or Uplink Uniform Resource Locater Volts Direct Current Voice over Internet Protocol Virtual Private Network Wireless Fidelity Issue: 01 3TG-01505-AAAB-TCZZA 169 Glossary Nokia FastMile 4G Receiver Product Overview 170 3TG-01505-AAAB-TCZZA Issue: 01 Customer document and product support Customer documentation Customer Documentation Welcome Page Technical Support Customer Documentation Technical Support Documentation feedback Customer Documentation Feedback Copyright 2020 Nokia. 3TG-01505-AAAB-TCZZA

NOKIA UAV UU UNV A FastMile Receiver P/N:3TGO1454AAAA eee oe UTA ATAU A IP66 Type 3. Made in China S/N: XXXXXXXXXXXXX FCC ID: 2ADZR4G01C ICS:xx MRev:xx MFG Year:xx wi:xx III ITIL URI EU IMEI:35343410XXXXXXX MAC: XXXXXXXXXXX XD:

LISTED 5011710