FCC ID: 2ADZRHA0236GA Mesh Wi-Fi 6 System

Nokia WiFi HA-0236G-A Extender Product Guide Home Broadband Wi-Fi Extender Nokia WiFi HA-0236G-A Extender Product Guide 3FE-48251-AAAA-TCZZA Issue 01 2020 Nokia Proprietary and confidential Use pursuant to applicable agreements Nokia WiFi HA-0236G-A Extender Product Guide Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners. The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein. 2020 Nokia. Contains proprietary/trade secret information which is the property of Nokia and must not be made available to, or copied or used by anyone outside Nokia without its written authorization. Not to be used or disclosed except in accordance with applicable agreements. 2 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 1 Preface 1.1 Scope 1.2 Audience This preface provides general information about the documentation set for HA-0236G-A extender equipment. This documentation set provides information about safety, features and functionality, ordering, hardware installation and maintenance, and software installation procedures for the current release. This documentation set is intended for planners, administrators, operators, and maintenance personnel involved in installing, upgrading, or maintaining the devices. 1.3 Required knowledge The reader must be familiar with general telecommunications and networking principles. 1.4 Acronyms and initialisms The expansions and optional descriptions of most acronyms and initialisms appear in the Glossary (3FE 47157 AAAA TCZZA). 1.5 Assistance and ordering phone numbers Nokia provides global technical support through regional call centers. Phone numbers for the regional call centers are available at the following URL:

http://customer.nokia.com/s/. If this link does not work, copy and paste it directly into your web browser. For ordering information, contact your Nokia sales representative. Issue 01 3FE-48251-AAAA-TCZZA 3 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide 1.6 Nokia quality processes Nokias extender quality practices are in compliance with TL 9000 requirements. These requirements are documented in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations 1.7 Safety information For safety information, see the appropriate safety guidelines chapter. 1.8 Documents Documents are available using Nokia Support Portal. Procedure 1 To download a ZIP file package of the customer documentation Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. 1 2 3 4 5 6 From the Technical Content for drop-down menu, choose the product. Click on Downloads: Electronic Delivery. Choose Documentation from the drop-down menu and click Next. Select the image from the drop-down menu and click Next. Follow the on-screen directions to download the file. 4 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable Procedure 2 To access individual documents Individual PDFs of customer documents are also accessible through the Nokia Customer Support website. 1 2 3 Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. From the Technical Content for drop-down menu, choose the product. Click on Manuals and Guides to display a list of customer documents by title and part number. You can filter this list using the Release drop-down menu. 4 Click on the PDF to open or save the file. 1.9 Special information The following are examples of how special information is presented in this document. Danger Danger indicates that the described activity or situation may result in serious personal injury or death; for example, high voltage or electric shock hazards. Warning Warning indicates that the described activity or situation may, or will, cause equipment damage or serious performance problems. Caution Caution indicates that the described activity or situation may, or will, cause service interruption. Note A note provides information that is, or may be, of special interest. Issue 01 3FE-48251-AAAA-TCZZA 5 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide 1.9.1 Procedures with options or substeps When there are options in a procedure, they are identified by letters. When there are required substeps in a procedure, they are identified by roman numerals. Procedure 3 Example of options in a procedure At step 1, you can choose option a or b. At step 2, you must do what the step indicates. 1 This step offers two options. You must choose one of the following:

Procedure 4 Example of required substeps in a procedure At step 1, you must perform a series of substeps within a step. At step 2, you must do what the step indicates. 1 This step has a series of substeps that you must perform to complete the step. You must perform the following substeps:

This is one option. This is another option. 2 You must perform this step. a b i ii This is the first substep. This is the second substep. iii This is the third substep. 2 You must perform this step. 6 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 1.10 Multiple PDF document search You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file. Note The PDF files in which you search must be in the same folder. Procedure 5 To search multiple PDF files for a common term Open Adobe Acrobat Reader. Choose EditSearch from the Acrobat Reader main menu. The Search PDF panel appears. Enter the search criteria. Click on the All PDF Documents In radio button. Select the folder in which to search using the drop-down menu. Click on the Search button. Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol. 1 2 3 4 5 6 Issue 01 3FE-48251-AAAA-TCZZA 7 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide 8 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide Table of contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.9.1 1.10 2 2.1 2.1.1 2.1.2 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.3 2.3.1 2.3.2 3 3.1 3.1.1 3.1.2 3.1.3 3.1.4 4 4.1 4.2 4.2.1 4.3 4.4 4.4.1 4.5 4.6 4.7 4.8 4.9 4.9.1 Preface.............................................................................................3 Scope ..........................................................................................................3 Audience......................................................................................................3 Required knowledge....................................................................................3 Acronyms and initialisms .............................................................................3 Assistance and ordering phone numbers ....................................................3 Nokia quality processes...............................................................................4 Safety information........................................................................................4 Documents ..................................................................................................4 Special information ......................................................................................5 Procedures with options or substeps...........................................................6 Multiple PDF document search ...................................................................7 ANSI extender safety guidelines .................................................15 Safety instructions .....................................................................................15 Safety instruction boxes in customer documentation ................................15 Safety-related labels..................................................................................16 Safety standards compliance ....................................................................17 EMC, EMI, and ESD standards compliance..............................................17 Energy-related products standby and off modes compliance....................18 FCC statement ..........................................................................................18 FCC Radiation Exposure Statement .........................................................19 Resistibility requirements compliance .......................................................19 Electrical safety guidelines ........................................................................19 Power supplies ..........................................................................................20 Cabling ......................................................................................................20 ETSI environmental guidelines ...................................................21 Environmental requirements......................................................................21 Extender environmental requirements.......................................................21 Transportation ...........................................................................................21 EU RoHS ...................................................................................................21 End-of-life collection and treatment ...........................................................22 HA-0236G-A extender data sheet ................................................23 HA-0236G-A extender part numbers and identification.............................23 HA-0236G-A extender general description................................................24 TR-069 object support ...............................................................................27 HA-0236G-A extender software and installation feature support ..............27 HA-0236G-A extender interfaces and interface capacity ..........................27 HA-0236G-A extender connections and components ..............................27 HA-0236G-A extender LEDs .....................................................................28 HA-0236G-A extender detailed specifications...........................................29 HA-0236G-A extender functional blocks ..................................................30 HA-0236G-A extender responsible party..................................................30 HA-0236G-A extender special considerations..........................................31 Wi-Fi service..............................................................................................31 Issue 01 3FE-48251-AAAA-TCZZA 9 Nokia WiFi HA-0236G-A Extender Product Guide 4.9.1.1 4.9.2 Wi-Fi standards and certifications .............................................................31 HA-0236G-A extender considerations and limitations..............................31 5 5.1 5.2 5.3 5.4 5.5 5.6 Install a HA-0236G-A extender ....................................................33 Purpose .....................................................................................................33 General......................................................................................................33 Prerequisites..............................................................................................33 Recommended tools..................................................................................33 Safety information......................................................................................34 Installation procedure ................................................................................34 10 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide List of figures 1 2 Figure 1 3 Figure 2 4 Figure 3 Figure 4 Figure 5 5 Preface.............................................................................................3 ANSI extender safety guidelines .................................................15 Sample safety label ..................................................................................17 ETSI environmental guidelines ...................................................21 Recycling/take back/disposal of product symbol .......................................22 HA-0236G-A extender data sheet ................................................23 HA-0236G-A extender ..............................................................................25 HA-0236G-A extender physical connections.............................................28 Wi-Fi extender [11ax 2+2+4] .....................................................................30 Install a HA-0236G-A extender ....................................................33 Issue 01 3FE-48251-AAAA-TCZZA 11 Nokia WiFi HA-0236G-A Extender Product Guide 12 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide List of tables 1 3 2 Table 1 4 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 5 Preface.............................................................................................3 ANSI extender safety guidelines .................................................15 Safety labels ..............................................................................................16 ETSI environmental guidelines ...................................................21 HA-0236G-A extender data sheet ................................................23 HA-0236G-A extender identification .........................................................23 HA-0236G-A Extender power supply .......................................................24 HA-0236G-A extender function detail........................................................26 HA-0236G-A extender interface connection capacity...............................27 HA-0236G-A extender physical connections............................................28 HA-0236G-A extender LED indications ....................................................29 HA-0236G-A extender physical specifications .........................................29 HA-0236G-A extender power consumption specifications .......................29 HA-0236G-A extender environmental specifications.................................30 Responsible party contact information ......................................................31 Install a HA-0236G-A extender ....................................................33 Issue 01 3FE-48251-AAAA-TCZZA 13 Nokia WiFi HA-0236G-A Extender Product Guide 14 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 2 ANSI extender safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of devices in the North American or ANSI market. 2.1 Safety instructions This section describes the safety instructions that are provided in the extender customer documentation and on the equipment. 2.1.1 Safety instruction boxes in customer documentation The safety instruction boxes are provided in the extender customer documentation. Observe the instructions to meet safety requirements. The following is an example of the Danger box. Danger Possibility of personal injury. The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm. Do not proceed beyond a Danger box until the indicated conditions are fully understood and met. The following is an example of the Warning box. Warning 1 Possibility of equipment damage. Warning 2 Possibility of data loss. The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data. Do not proceed beyond a warning until the indicated conditions are fully understood and met. Issue 01 3FE-48251-AAAA-TCZZA 15 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide The following is an example of the Caution box. Caution 1 Possibility of service interruption. Caution 2 Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note Information of special interest. The Note box provides information that assists the personnel working with devices. It does not provide safety-related instructions. 2.1.2 Safety-related labels The customer premises equipment is labeled with specific safety compliance information and instructions that are related to a variant of the extender. Observe the instructions on the safety labels. Table 1 provides examples of the text in the various extender safety labels. Table 1 Safety labels Label text Description ETL compliance Communication service equipment US listed. ESD warning Caution: This assembly contains electrostatic sensitive device. FCC standards compliance Tested to comply with FCC standards for home or office use. Figure 1 shows a sample safety label located on the bottom of the HA-0236G-A extender. 16 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable Figure 1 Sample safety label 2.2 Safety standards compliance This section describesthe extender compliance with North American safety standards. Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.2.1 EMC, EMI, and ESD standards compliance The customer premises equipment complies with the following requirements:

Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Class B requirements for equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Issue 01 3FE-48251-AAAA-TCZZA 17 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. Consult the dealer or an experienced radio/TV technician for help. 2.2.2 Energy-related products standby and off modes compliance Hereby, Nokia declares that the HA-0236G-A extender devices are in compliance with the essential requirements and other relevant provisions of Directive 2009/125/EC together with Commission Regulation (EC) No 1275/2008 and Commission Regulation (EC) No 801/2013. The HA-0236G-A extender devices qualify as high network availability (HiNA) equipment. Since the main purpose of HA-0236G-A extender devices is to provide network functionality with HiNA 7 days/24 hours, the modes Off/Standby, Power Management, and Networked Standby are inappropriate. For information about the type and number of network ports, see HA-0236G-A extender interfaces and interface capacity in chapter 4. For information about power consumption, see HA-0236G-A extender detailed specifications in chapter 4. 2.2.3 FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 18 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 2.2.4 FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1 this device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Note 1 For product availability in the USA and Canada, only channels 1 to 11 can be operated. Selection of other channels is not possible. Note 2 This device is restricted for indoor use. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.2.5 Resistibility requirements compliance The customer premises equipment complies with the requirements of ITU Recommendation K.21 for resistibility of telecommunication equipment installed in customer premises to overvoltage and overcurrents. 2.3 Electrical safety guidelines This section provides the electrical safety guidelines for the customer premises equipment. Issue 01 3FE-48251-AAAA-TCZZA 19 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide HA-0236G-A extender devices are compliant with the following standards IEC-62368-1 UL-62368-1 Note The devices comply with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 2.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 2.3.2 Cabling The following are the guidelines regarding cables used for the customer premises equipment:

Use only cables approved by the relevant national electrical code. 20 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 3 ETSI environmental guidelines This chapter provides information about environmental operation parameters of general interest. 3.1 Environmental requirements Observe the following environmental requirements when handling the extender 3.1.1 Extender environmental requirements See the extender technical specification documentation for more information about temperature ranges. According to EN 300-019-1-2 - Class 2.3, transportation of the equipment must be in packed, public transportation with no rain on packing allowed. 3.1.2 Transportation 3.1.3 EU RoHS European Union (EU) Directive 2011/65/EU, Restriction of the use of certain Hazardous Substances (RoHS), restricts the use of lead, mercury, cadmium, hexavalent chromium, and certain flame retardants in electrical and electronic equipment. Nokia products shipped to the EU comply with the EU RoHS Directive. Nokia has implemented a material/substance content management process. The process is described in: Nokia process for ensuring RoHS Compliance

(1AA002660031ASZZA). This ensures compliance with the European Union Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment. Issue 01 3FE-48251-AAAA-TCZZA 21 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide 3.1.4 End-of-life collection and treatment Electronic products bearing or referencing the symbol shown in Figure 2, when put on the market within the European Union (EU), shall be collected and treated at the end of their useful life, in compliance with applicable EU and local legislation. They shall not be disposed of as part of unsorted municipal waste. Due to materials that may be contained in the product, such as heavy metals or batteries, the environment and human health may be negatively impacted as a result of inappropriate disposal. Note In the European Union, a solid bar under the symbol for a crossed-out wheeled bin indicates that the product was put on the market after 13 August 2005. About mark is used in compliance to European Union WEEE Directive (2012/19/EU). There can be different requirements for collection and treatment in different member states of the European Union. In compliance with legal requirements and contractual agreements, where applicable, Nokia will offer to provide for the collection and treatment of Nokia products bearing the logo shown in Figure 2, at the end of their useful life, or products displaced by Nokia equipment offers. For information regarding take-back of equipment by Nokia, or for more information regarding the requirements for recycling/disposal of product, contact your Nokia account manager or Nokia take back support at sustainability.global@nokia.com. Figure 2 Recycling/take back/disposal of product symbol 22 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 4 HA-0236G-A extender data sheet 4.1 HA-0236G-A extender part numbers and identification 4.2 HA-0236G-A extender general description 4.3 HA-0236G-A extender software and installation feature support 4.4 HA-0236G-A extender interfaces and interface capacity 4.5 HA-0236G-A extender LEDs 4.6 HA-0236G-A extender detailed specifications 4.7 HA-0236G-A extender functional blocks 4.8 HA-0236G-A extender responsible party 4.9 HA-0236G-A extender special considerations 4.1 HA-0236G-A extender part numbers and identification Table 2 provides part numbers and identification information for the HA-0236G-A extender. Table 2 HA-0236G-A extender identification Ordering part number Provisioning number Description CLEI Code CPR ECI/

Bar code Wi-Fi Router 3FE48265AAAA 3FE 48251 AA Nokia T-Mobile extender 2 Gigabit Ethernet, AX4200 Triband Wi-Fi 6, US plug. BVMJP00ARA N70HWG 474609 Table 3 provides power supply ordering information for the HA-0236G-A extender. Issue 01 3FE-48251-AAAA-TCZZA 23 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide Table 3 HA-0236G-A Extender power supply Manufacturer Applicable power supply model Power information Compliance detail Notes FUHUA UES24WU-120200SPA 12V2A, US plug, DC plug 12 mm ANSI municipality US, FCC/ETL 2-pin US wall mounted input plug Type A RUIDE RD1202000-C55 154MG 12V2A, US plug, DC plug 12 mm 4.2 HA-0236G-A extender general description Wi-Fi is abundantly deployed in home networks. Users crave a seamless experience at home including effortlessly connecting their wireless devices to the network. Traditional Wi-Fi networks require unique SSIDs for each of the access points or tedious set-up of Wi-Fi extenders, which complicate the user experience. The Nokia WiFi network simplifies the user experience by providing a seamless mesh network with easy device onboarding and automated network optimization, which is configured using the Mobile app. The HA-0236G-A extender is a device that supports Wi-Fi 6 (IEEE 802.11ax) to extend 4G LTE and 5G Sub6GHz RGW with Tri-band speeds throughout the home using Easy Mesh technology. The RGW is the central point of the mesh network providing access to the broadband network (Internet) while the HA-0236G-A extender extends the Wi-Fi coverage to every corner of the home, providing seamless roaming to wireless connected devices. The HA-0236G-A extender requires a QR scanning on boarding procedure. Figure 3 shows the HA-0236G-A extender. 24 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable Figure 3 HA-0236G-A extender T 28951 The HA-0236G-A does not have any RGW features and is primarily used for extending customer Wi-Fi access. Wi-Fi devices (client) connect to the HA-0236G extender, then traffic is from the extender to the RGW using Ethernet cable or Wi-Fi. The overall Nokia WiFi solution is composed of a 5G RGW, one or more HA-0236G extender(s), the Nokia WiFi Care Portal for the operators customer care team, and a mobile application for the end-users self care. Note The Nokia WiFi Care Portal can be accessed by the end user and the operator. The HA-0236G-A extender provides the following functions and benefits. Form a mesh network using Easy Mesh technology. Tri-band wifi6 (IEEE 802.11ax), and compatible with IEEE 802.11a/b/g/n/ac:

2.4 GHz: 2x2, (40MHz BW) 5 GHz Low: 2x2, (80MHz BW) 5 GHz High: 4x4, (80MHz BW) Orthogonal Frequency-Division Multiple Access (OFDMA) Maximum number of connected devices is 64(Can be extended up to 256 if required) WPA, WPA2, and WPA3 personal encryption Racetrack enclosure Issue 01 3FE-48251-AAAA-TCZZA 25 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide Benefits:

OFDMA and MU-MIMO are multiuser technologies that enable simultaneous bidirectional communication between an access point (AP) and end users. While MU-MIMO increases capacity and efficiency in high-bandwidth applications like mission-critical voice calls and video streaming, OFDMA is ideal for low-bandwidth, small-packet applications such as IoT sensors. PHY rate up to 574 Mb/s for 2.4 GHz, 1200 M b/s for low 5 GHz, and 2400 Mb/s for High 5 GHz High quality of service (QoS) video over Wi-Fi Improves connection speeds throughout the home and provides Wi-Fi where typically there would be none. Ease of setup because the extender uses Wi-Fi as the backhaul; it is more free to find a place for it. User intuitive information Table 4 lists additional function detail. Table 4 HA-0236G-A extender function detail Function Detail Installation Interfaces Desk mounted Two RJ45 Gigabit Ethernet (10/100/1000Base-T) LAN ports; any one of them can be used as Ethernet backhaul link Supports 2x2 802.11a/b/g/n/ac/ax 2.4 GHz wireless LAN (WLAN) interface Supports 2x2 802.11a/b/g/n/ac/ax 5 GHz low band wireless LAN (WLAN) interface Supports 4x4 802.11a/b/g/n/ac/ax 5 GHz high band wireless LAN (WLAN) interface Maximum effective isotropic radiated power (EIRP) on 2.4 GHz up to 500 mW, 5 GHz (low Basic function band) up to 500mw, and 5 GHz (high band) up to 1 W Layer 2 forwarding WPA support including WPA, WPA2, and WPA3 personal encryption Nokia Design for Security (DFSEC) requirement compliant Priority queue based QoS Supports TR-069 with ACS access for remote device management Supports FOTA using T-Mobile ACS server Flexible video delivery options over Ethernet or wireless LED Regulatory compliance Single multi-color LED for simple and intuitive status indication IEC/UL 62368-1 FCC Part 15 26 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 4.2.1 TR-069 object support HA-0236G-A extender supports the following activities:

Software image upgrade by ACS Log file retrieval by ACS Wi-Fi statistic retrieval by ACS 4.3 HA-0236G-A extender software and installation feature support To install the HA-0236G-A extender, see Install a HA-0236G-A extender. 4.4 HA-0236G-A extender interfaces and interface capacity Table 5 describes the supported interfaces and interface capacity for HA-0236G-A extender devices. Table 5 HA-0236G-A extender interface connection capacity Device type and model Maximum capacity 10/100 BASE-T HA-0236G-A extender 1 1 POTS 10/100/1000 BASE-T MoCA VDSL2 E1/T1 RF video

(CATV) Local craft 4.4.1 HA-0236G-A extender connections and components Figure 4 shows the physical connections for HA-0236G-A extender. Issue 01 3FE-48251-AAAA-TCZZA 27 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide Figure 4 HA-0236G-A extender physical connections POWER LAN1 RESET ON/OFF LAN2 POWER LAN 1 LAN 2 RESET ON/OFF 35632 Table 6 describes the physical connections for HA-0236G-A. Table 6 HA-0236G-A extender physical connections Connection Reset button LAN Power input Description Pressing the Reset button for less than 10 seconds reboots the extender; pressing the Reset button for 10 seconds or more restores the extender to its factory defaults. This connection is provided through Ethernet RJ-45 connectors. One 10/100/1000 Base-T Ethernet interface is supported. The Ethernet ports can support both data and in-band video services. This connection is provided through the power connector. A power cable fitted with a barrel connector is used to make the connection. ON/OFF button This button powers the unit on or off. 4.5 HA-0236G-A extender LEDs The HA-0236G-A extender has multi-color LED indicator on the front face. The LED color and pulse rate acts as a signal to the home user, which indicates the state of the extender and the quality of its backhaul link. Table 7 provides LED descriptions for the HA-0236G-A extender. 28 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable Table 7 HA-0236G-A extender LED indications LED color LED behavior LED behavior description Off Blue - Green Yellow Red Off Solid Solid Solid Power off. Good backhaul connection. A link to the next node is available. Backhaul connection is successful but not optimal. A link to the next node is below standard. Backhaul connection is not successful. A link to the next node is not operational. Fast pulsing Factory reset White Solid Powering on 4.6 HA-0236G-A extender detailed specifications Table 8 lists the physical specifications for the HA-0236G-A extender. Table 8 HA-0236G-A extender physical specifications Description Length Width Height Weight [within 0.5 lb (0.23 kg)]

Specification 61 mm (2.40 in.) 160 mm (6.30 in.) 205 mm (8.07in.) 766.0 g (1.69 lb) Table 9 lists the power consumption specifications for the HA-0236G-A extender. Table 9 HA-0236G-A extender power consumption specifications Maximum power

(Not to exceed) Condition Minimum power Condition

~24 W 2 10/100/1000 Base-T Ethernet, Wi-Fi operational 4.9 W interfaces/services not provisioned HA-0236G-A extender is Thermal compliant to UL Standard 60950-1, EN563 Thermal, and ASTM C1055 Thermal Sensation and Associated Effects. Table 10 lists the environmental specifications for HA-0236G-A extender. Issue 01 3FE-48251-AAAA-TCZZA 29 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide Table 10 HA-0236G-A extender environmental specifications Temperature range and humidity Altitude Mounting method On desk or shelf Operating: -5C to 45C (23F to 113F) ambient temperature 95% relative humidity, non-condensing at 40C Storage: --20C to 70C (-4F to 158F) Contact your Nokia technical support representative for more information 4.7 HA-0236G-A extender functional blocks HA-0236G-A extender devices are single-residence units that support Wireless

(Wi-Fi) service. Wi-Fi service on these devices is compliant with the IEEE 802.11ax

(Wi-Fi 6) standard to extend the 4G LTE and 5G Sub6GHz indoor speeds using Easy Mesh technology. In addition to the Wi-Fi service, these devices transmit Ethernet packets to two RJ-45 Ethernet ports. Any one of them, but only one, can be used as an Ethernet backhaul link. Figure 5 shows the functional blocks for the HA-0236G-A extender. Figure 5 Wi-Fi extender [11ax 2+2+4]

512MB DDR3 256MB Flash Power Adapter 4x4 11ax

(5G High Band - 80Mhz) 2x2 11ax

(5G low band - 80Mhz) SoC Diplexer 2x2 11ax

(2.4G low band - 40Mhz) 5G Radio

(5G high) 4xFEM 5G

(5G low) 2xFEM 2.4G radio 2xFEM Eth PHY 1xGE LAN

(RJ45) 1xGE LAN

(RJ45) 4.8 HA-0236G-A extender responsible party Table 11 lists the party in the US responsible for the extender. 35633 30 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable Table 11 Responsible party contact information Legal Company name Nokia USA Inc. Address Phone, Fax

+1 866 582-3688 2301 SUGAR BUSH RD. STE 300, RALEIGH, NC 27612 4.9 HA-0236G-A extender special considerations This section describes the special considerations for HA-0236G-A extender devices. 4.9.1 Wi-Fi service HA-0236G-A extender devices feature Wi-Fi service as well as data services. Wi-Fi is a wireless networking technology that uses radio waves to provide wireless HSI and network connections. This device complies with the IEEE 802.11ax standards, which the Wi-Fi Alliance defines as the basis for Wi-Fi technology. This standard also extends the 4G LTE and 5G Sub6Ghz indoor speeds, throughout the home using Easy Mesh technology. 4.9.1.1 Wi-Fi standards and certifications The Wi-Fi service on B HA-0236G-A extender devices supports the following IEEE standards, FCC Standars, and Wi-Fi Alliance certifications:

Wi-Fi: Wi-Fi Alliance Safety: ETL Resistibility: K21 and Surge Immunity Test of AC power Line supports: Differential mode standard: 6kV; Common mode standard: 6kV Environmental: (ETSI EN 300 019-2-3 V2.4.1 (2015-12) T3.2 (no icing, no condensation) for working, ETSI EN 300 019-2-2 V2.4.1 (2017-11) T 2.3 for Transportation, ETSI EN 300 019-2-1 V2.3.1 (2017-11) T 1.2 for Storage FCC Standards compliance (47 CFR FCC Part 15 Subpart B/C/E) 4.9.2 HA-0236G-A extender considerations and limitations None Issue 01 3FE-48251-AAAA-TCZZA 31 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide 32 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable 5 Install a HA-0236G-A extender 5.1 Purpose 5.2 General 5.3 Prerequisites 5.4 Recommended tools 5.5 Safety information 5.6 Installation procedure 5.1 Purpose 5.2 General This chapter provides the steps to install a HA-0236G-A extender using an Ethernet cable. For a guided setup procedure using the APP, refer to the Quick Start Guide

(QSG) found in the HA-0236G-A extender package. The steps listed in this chapter describe installing and cabling for a HA-0236G-A extender. 5.3 Prerequisites You need the following items before beginning the installation:

One Ethernet cable (included with the device) AC power jack Running TMO 5G CPE RGW 5.4 Recommended tools You need the following tools for the installation:

Paper clip Issue 01 3FE-48251-AAAA-TCZZA 33 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide 5.5 Safety information Read the following safety information before installing the unit. Danger 1 Hazardous electrical voltages and currents can cause serious physical harm or death. Always use insulated tools and follow proper safety precautions when connecting or disconnecting power circuits. Danger 2 Make sure all sources of power are turned off and have no live voltages present on feed lines or terminals. Use a voltmeter to measure for voltage before proceeding. Danger 3 Always contact the local utility company before connecting the enclosure to the utilities. Caution Keep indoor devices out of direct sunlight. Prolonged exposure to direct sunlight can damage the unit. Note 1 Observe the local and national laws and regulations that may be applicable to this installation. Note 2 Observe the following:

The device must be installed by qualified service personnel. Indoor units must be installed with cables that are suitably rated and listed for indoor use. See the detailed specifications in the HA-0236G-A extender data sheet for the temperature ranges for these devices. 5.6 Installation procedure Use this procedure to install a HA-0236G-A extender. 34 3FE-48251-AAAA-TCZZA Issue 01 Nokia WiFi HA-0236G-A Extender Product Guide ChapterTitleVariable Procedure 6 Installation procedure 1 Place the unit on a flat surface, such as the base included, a desk or shelf. Note 1 The HA-0236G-A extender cannot be stacked with another extender or with other equipment. The installation requirements are:

allow a minimum 100 mm clearance above the top cover allow a minimum 50 mm clearance from the side vents do not place any heat source directly above the top cover or below the bottom cover Note 2 The Wi-Fi coverage between the RGW and the HA-0236G-A extender must overlap the Wi-Fi/Ethernet signal to configure Easy Mesh seamlessly. The number of HA-0236G-A extender(s) needed depends on the size of area that needs access. 2 3 4 5 6 Review the connection locations, as shown in Figure 3. Connect the Ethernet cable to the RJ-45 port; see Figure 3 for the location of the RJ-45 port. Connect the power cable to the power connector. Note Units must be powered by a Listed power supply with a minimum output rate of 12 V dc, 2A. The polarity of the power adapter plug must match the extender. Power up the unit by using the On/Off power switch. Verify the LED, which indicates WiFi backhaul quality. See 4.5HA-0236G-A extender LEDs for the LED description. Issue 01 3FE-48251-AAAA-TCZZA 35 ChapterTitleVariable Nokia WiFi HA-0236G-A Extender Product Guide If the Ethernet backhaul is connected, the LED does not indicate the WiFi backhaul signal quality. Only when the LED is blue-green, the extender indicates a good backhaul connection and it has started and configured. At this time, you can remove the Ethernet backhaul cable and it will switch to WiFi backhaul automatically, then you can move the extender to another place. Note 1 You may consider repositioning the HA-0236G-A extender after evaluating the WiFi backhaul signal. If :

there is no WiFi backhaul signal is weak or medium. The LED is solid red or yellow. you want to further improve your service. You might need to repeat this cycle several times before finding the best location for the HA-0236G-A extender. Note 2 Position the HA-0236G-A extender in a place with few obstructions for Wi-Fi waves, least number of walls between the extender and the RGW or any other extenders. Away from the metal fixture, enclosures, cabinets, appliances, blinds, reinforced concrete, and pipes. 7 If necessary, reset the HA-0236G-A extender. Note Resetting the device will return all settings to factory default values; any configuration customization will be lost. Locate the Reset button as shown in Figure 3. i ii Insert the end of a straightened paper clip or other narrow object into the hole in the Reset button and push for more than 10 seconds to reset the device. 8 STOP. This procedure is complete. 36 3FE-48251-AAAA-TCZZA Issue 01 Customer document and product support Customer documentation Customer Documentation Welcome Page Technical Support Customer Documentation Technical Support Documentation feedback Customer Documentation Feedback Copyright 2020 Nokia. 3FE-48251-AAAA-TCZZA

Home Broadband Wi-Fi Extender Model:HA-0236G-A 12VDC=2A CLEI-BVMJPOOAR FCC ID:2ADZRHAO236GA SN:ALCLXXXXX P/N-XXXXXXXXXXXX MAC XXXKXXXK PZ MFG Year:XX Wk:XX MRev:XX ICS:XX Made in Chin:

Manufactured by Nokia Solutions and Networks Oy Karakaari 7, 02160 Espoo, Finland

Home Broadband Wi-Fi Extender Model:HA-0236G-A 12VDC#2A _CLEI-BVMJPOOAR FCC ID:2ADZRHAO236GA SN:ALCLXXXXX P/N-XXXXXXXXXXXX MACXXXXKXKXXK PZ MFG YearXX WkXX MRev:XX ICS:XX Made in Vietnar Manufactured by Nokia Solutions and Networks Oy Karakaari 7, 02160 Espoo, Finland

Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Class II Change Letter Date: 2020/7/1 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern:

Request for Class II Permissive Change FCC ID: 2ADZRHA0236GA / Grant Date: 04/30/2020 Pursuant to CFR 2.1043, Nokia Shanghai Bell Co. Ltd. hereby requests a Class II Permissive Change. The model name shall be same as before. Modification:

Adding U-NII-2A and U-NII-2C bands (5250~5350 MHz, 5470~5725 MHz) for this device. There is no change in hardware or in existing RF relevant portion. The device operates in the TDWR band. The product enables U-NII-2A and U-NII-2C bands via Firmware by factory. There is no any software that can be modified by end-user. Change the equipment name and brand name from Home Broadband Wi-Fi Extender /

T-Mobile to Mesh Wi-Fi 6 System / Nokia. Sincerely, Applicants company name

: Nokia Shanghai Bell Co. Ltd. Applicants company address

: No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Signature

Name and Job Title

: Yong Tu / Hardware Advisory Engineer E-Mail Tel Fax

: yong.tu@nokia-sbell.com

: 86-21-38439795

: 86-21-38430001-1119

Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai, China 201206 Confidential Letter Date: 2020/5/14 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID : 2ADZRHA0236GA To Whom It May Concern:

Long Term Confidentiality Pursuant fo Sections 0.457 and 0.459 of the Commission's Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

@ Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

e Test Setup photos Sincerely, Applicant's company name : Nokia Shanghai Bell Co, Ltd. Applicant's company address : No. 388, Ninggiao Rd. Pilot Free Trade Zone Shanghai, China 201206 Signature : Tou Ta Name and Job Title : Yong Tu / Hordware Advisory Engineer E-Mail 2 yong.tu@nokia-sbell.com Tel > 86-21-38439795 Fax : 86-21-38430001-1119

Nokia Shanghai Bell Co. Lid. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai, China 201208 Power of Attorney Date: 2020/5/14 Dear Sir,

| hereby have entrusted the following person to be a proxy regarding application for Type Certification, Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jnubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : Leohuang@sporton.com.tw tam therefore responsible for the contents of the application. FCC ID: 2ADZRHAO0236GA Sincerely, Applicant's company name : Nokia Shanghai Bell Co. Ltd. Applicant's company address : No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai, China 201206 Signature : pony Ww Name and Job Tifle : Yong Tu / Hardware Advisory Engineer E-Mail : yong.tu@nokia-sbell.com Tel 1 86-21-38439795 Fax : 86-21-38430001-1119

Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai, China 201204 TPC Declaration Letter Date: 2020/5/14 FCC ID + 2ADZRHA0236GA To Whom It May Concern:

We, Nokia Shanghai Bell Co. Ltd., declare thot the device supports the TPC function in final F/W when EUT is sold to FCC morket. Regards, Sincerely yours, Applicant's company name : Nokia Shanghai Bell Co. Ltd. Applicant's company address : No, 388, Ninggioo Rd. Pilot Free Trade Zone Shanghai, China 201206 Signature : Yana WA Name and Job Title > Yong Tu / Hardware Advisory Engineer E-Mail > yong.tu@nokia-sbell.com Tel : 86-21-38439795 Fax : 86-21-38430001-1119

Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai, China 201206 SDoC Attestation Letter Date: 2020/2/24 We Nokia Shanghai Bell Co. Ltd., as the grantee of this project (FCC ID: 2ADZRHAQ236GA / Brand Name: T-Mobile /

Model No.: HA-0236G-A)}, would like to declare that the composite portion has been authorized under the Supplier's Declaration of Conformity procedures (Sporton report No.: FO9D0907, FCC designation number: TW1096). The final product shall consequently comply with the FCC rule applied for SDoC Procedure. Regards, Sincerely, Applicants company name : Nokia Shanghai Bell Co. Ltd. Applicants company address : No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai, China 201206 Signature : tory ta Name and Job Title : Yong Tu / Hardware Advisory Engineer E-Mail : yong.tu@nokia-sbell.com Tel + 86-21-38439795 Fax : 86-21-38430001-1119