submitted / available | |||||||
---|---|---|---|---|---|---|---|
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Test Report | / June 06 2018 | ||||||
Cover Letter(s) | / June 06 2018 | ||||||
Cover Letter(s) | / June 06 2018 | ||||||
Cover Letter(s) | / June 06 2018 | ||||||
Cover Letter(s) | / June 06 2018 | ||||||
Cover Letter(s) | / June 06 2018 | ||||||
RF Exposure Info | / June 06 2018 | ||||||
RF Exposure Info | / June 06 2018 | ||||||
Test Setup Photos | / March 12 2018 | ||||||
Attestation Statements | August 02 2018 / September 02 2018 | ||||||
Cover Letter(s) | August 02 2018 / September 02 2018 | ||||||
Cover Letter(s) | August 02 2018 / September 02 2018 | ||||||
Cover Letter(s) | August 02 2018 / September 02 2018 | ||||||
Cover Letter(s) | August 02 2018 / September 02 2018 | ||||||
Cover Letter(s) | August 02 2018 / September 02 2018 | ||||||
Cover Letter(s) | August 02 2018 / September 02 2018 | ||||||
External Photos | August 02 2018 / September 08 2018 | ||||||
ID Label/Location Info | August 02 2018 / September 02 2018 | ||||||
RF Exposure Info | August 02 2018 / September 02 2018 | ||||||
Test Setup Photos | August 02 2018 / September 08 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 | ||||||
Test Report | August 02 2018 / September 02 2018 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-06-06 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 2018-02-09 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
4 | 2412 ~ 2462 | DTS - Digital Transmission System |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2018-06-06
|
|||||
2018-02-09
|
||||||
Applicant's complete, legal business name |
Nokia Solutions and Networks, OY
|
|||||
FCC Registration Number (FRN) |
0024290108
|
|||||
Physical Address |
2000 W. Lucent Lane
|
|||||
Naperville, Illinois 60563
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
t******@us.bureauveritas.com
|
|||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
FCC ID | ||||||
Grantee Code |
2AD8U
|
|||||
Equipment Product Code |
FZCWMBOM2
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
T******** S******
|
|||||
Title |
R&D Engineer
|
|||||
Telephone Number |
84780********
|
|||||
Fax Number |
22424********
|
|||||
t******@nokia.com
|
||||||
Technical Contact | ||||||
n/a | ||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/03/2018 | |||||
08/09/2018 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | NII - Unlicensed National Information Infrastructure TX | |||||
DTS - Digital Transmission System | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC220m Wi-Fi module OD US | |||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | |||||
No | ||||||
Modular Equipment Type | Limited Single Modular Approval | |||||
Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | |||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. | |||||
Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. | ||||||
Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. | ||||||
Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
MRT Technology (Taiwan) Co.,Ltd
|
|||||
Name |
C**** K********
|
|||||
Telephone Number |
+886-********
|
|||||
Fax Number |
+886-********
|
|||||
c******@mrt-cert.com
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC MO | 5180 | 5240 | 0.0239 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC MO ND | 5260 | 5320 | 0.1807 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | CC MO ND | 5500 | 5720 | 0.1884 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | CC MO | 5745 | 5825 | 0.6252 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.8551000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | CC MO | 5180 | 5240 | 0.0239 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | CC MO | 5745 | 5825 | 0.6252 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC MO | 2412.00000000 | 2462.00000000 | 0.8551000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC