FCC ID: 2AD8UASMR24FA3UB Nokia Airscale mmWave Radio 5G AWEUC/D and FA3WA

Applicant: Nokia Solutions and Networks, OY EXHIBIT 4: FCC ID LABEL SAMPLE AND LOCATION INFORMATION

-13 -

FCC ID: 2AD8UASMR24FA3UB SECTION 2.1033(c) (11) also SECTION 2.925 (a) (1) A photograph or drawing of the equipment identification plate or label showing the information to be placed thereon. Response:

The drawing of the equipment identification labels to be placed on the Nokia AWEUC/D 5G AirScale 24 GHz mmWave Radio, FCC ID: 2AD8UASMR24FA3UB are below. A drawing showing label location and drawings of the equipment identification label is attached. Nokia Solutions and Networks, OY Applicant: Nokia Solutions and Networks, OY

-14 -

FCC ID: 2AD8UASMR24FA3UB FCC Label Drawings for Nokia AWEUC 5G AirScale 24 GHz mmWave Radio, FCC ID: 2AD8UASMR24FA3UB - AWEUC Base Unit Nokia Solutions and Networks, OY Applicant: Nokia Solutions and Networks, OY

-15 -

FCC ID: 2AD8UASMR24FA3UB FCC Label Drawings for Nokia AWEUD 5G AirScale 24 GHz mmWave Radio, FCC ID: 2AD8UASMR24FA3UB - AWEUD Base Unit Nokia Solutions and Networks, OY Applicant: Nokia Solutions and Networks, OY

-16 -

FCC ID: 2AD8UASMR24FA3UB FCC Label Drawings for Nokia FA3UB 5G AirScale 24 GHz mmWave Extension Module, FCC ID: 2AD8UASMR24FA3UB FA3UB Extension Unit Nokia Solutions and Networks, OY Applicant: Nokia Solutions and Networks, OY Equipment Identification Label Location (Equipment Left Side):

-17 -

FCC ID: 2AD8UASMR24FA3UB FA3UB Extension Module AWEUC/D Base Unit Label Location Nokia Solutions and Networks, OY

Timco Engineering Inc. FCC Authorized Telecommunication Certification Body (TCB) 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 Nokia Solutions and Network, OY 2000 W. Lucent Lane, Naperville, IL 60563 September 2, 2022 Subject: Application for C2PC Equipment Authorization under FCC ID: 2AD8UASMR24FA3UB for Nokia AWEUC/D Airscale mmWave Radio 5G n258 24GHz 192AE Concurrent with FA3WA Extension Module 5G n260 39 GHz 192AE, Operating in the Bands n258 and n260 Dear Examiner:

The Nokia AWEUC/D Airscale mmWave Radio 5G n258 24 GHz 192AE is part of Nokia ASMR family of products supporting 5G New Radio technology. This system is composed of a base unit and up to two extension modules. The Radio Base Unit, an AWEWC (AC version) or an AWEWD (DC version) can be paired with the FA3UB (24GHz 192AE) or FA3WA (39 GHz 192AE) extension modules. ID:

The AWEUC/D Airscale mmWave Radio 5G n258 24 GHz base unit has been certified under FCC 2AD8UASMR24FA3UB with option of pairing with FA3UB 24GHz extension modules for up to 360 deg coverage. The FA3UB 24GHz Extension Module has also been individually certified under FCC ID: 2AD8UAFA3UB01. This application is for Class II permissive change (C2PC) authorizing the operation of the AWEUC/D base units (24GHz) paired with FA3WA (39GHz) extension module for concurrent operation, where these two transmitters operate at maximum power within their approved band and may be transmitting in the same sector. The FA3WA 39GHz Extension Module has also been individually certified under FCC ID: 2AD8UAFA3WA01. The AWEUC/D transceiver modules implement two individually polarized 8x12 arrays with a total power output capability of 52 dBm EIRP per polarization and a total combined power of 55 dBm EIRP in n258, Upper Microwave Flexible Use Service spectrum (24.25-25.25 GHz) under 47CFR Part 30. It can be configured to provide one to seven 100MHz carriers in n258, where one or two carriers in 24.25-24.45GHz and one to five carriers in the 24.75-25.25 GHz. The total RF power of AWEWC/D will be equally divided among the carriers. The FA3WA extension module implements two individually polarized 8x12 arrays with a total power output capability of 52 dBm EIRP per polarization and a total combined power of 55 dBm EIRP in n260, Upper Microwave Flexible Use Service spectrum (37 40 GHz) under 47CFR Part 30. It can be configured to provide one to eight 100MHz carriers. The total RF power of FA3WA will be equally divided among the carriers. The measurement and RF exposure exhibits attached to this application demonstrate full compliance with FCC Part 30 following the procedural requirements specified in FCC Part 2 Subpart J Equipment Authorization Procedures. The data are summarized below:

FCC ID of Main Unit AWEUC/D: 2AD8UASMR24FA3UB Rules Part Number:

Frequency Range:

Output Power:

Part 30 Transmit/ Receive: 24.25-25.25 GHz 52 dBm EIRP per polarization and 55 dBm EIRP Total per unit Nokia 2022 Carriers:

FCC ID of Extension FA3WA:

Rules Part Number:

Frequency Range:

Output Power:

Carriers:

1~7 Carriers 2AD8UAFA3WA01 Part 30 Transmit/ Receive: 37 40 GHz 52 dBm EIRP per polarization and 55 dBm EIRP Total per unit 1~8 carriers Attached are the FCC Form 731 (Application for Equipment Authorization Radio Frequency Devices), the required measurement data and exhibits specific to this request for authorization of the AWEUC/D AirScale mmWave Radio 5G n258 24 GHz Radio Unit paring with FA3WA 39 GHz Extension Unit. Both 2AD8UASMR24FA3UB AWEUC/D and 2AD8UAFA3WA01 FA3WA were approved under PAGs previously. Both devices are electrically identical to the devices previously approved under a PAG and there are no changes. The test procedures and evaluation conditions are consistent with that approved previously under PAG. Per KDB 388624 D01 Pre-Approval Guidance, it is not necessary for manufacturers to file PAG requests for permissive changes on devices previously processed under the pre-approval process if the earlier guidance remains fully applicable; however, the TCB must re-open by replying in the original PAG KDB to request FCC review of the subsequent permissive change application and enable it to be granted. The technical or non-technical contact at Nokia Bell Labs will comply with any request for additional information should the need arise. The attached exhibits with the applicable FCC Rule section are assembled and presented in accordance with the Table of Contents attachment. Should there be any questions or procedural issues please feel free to contact me by email and/or phone. Sincerely, Raymond J. Johnson Technical Manager FCC Compliance Test Group Nokia, Global Product Compliance Laboratory Phone: +1 908 679 6220 email: ray.johnson@nokia-bell-labs.com Primary Administrative Contact Raymond J. Johnson Technical Manager FCC Compliance Test Group Nokia, Global Product Compliance Laboratory Building 5A-127 600 Mountain Avenue Murray Hill, NJ 07974 Phone: +1 908 679 6220 Nokia 2022 email: ray.johnson@ nokia-bell-labs.com Filing Engineer Qin Yu Global Product Compliance Laboratory email: q.yu@nokia-bell-labs.com TABLE OF CONTENTS Cover Letter Required Exhibits*:

EXHIBIT FCC RULES CONTENTS Exhibit 1 Section 2.1033(a) TCB Application Form 731 Exhibit 2 Sections 2.911 (d)(1, 2) & 2.911 (e) Certifications and Qualification Exhibit 3 Sections 2.1033 (c)(14), 2.911 (e) Test Report Exhibit 4 Sections 1.1307 & 1.1310 RF Exposure Assessment Exhibit 5 Section 2.1033 (c)(21) Setup Drawings or Photographs

*The information in the exhibits submitted in the original filings under FCC ID 2AD8UASMR24FA3UB and FCC ID 2AD8UAFA3WA01 about Manufacturer, Applicant and Identifier, Descriptions of Operation, Block Diagrams, Schematics, Photos and Product Label are still valid and will not be resubmitted here. Nokia 2022

APPLICANT: Nokia EXHIBIT 2 FCC ID: 2AD8UASMR24FA3UB EXHIBIT 2 Section 2.911(d) (1) CERTIFICATION FOR STATEMENTS The applicant shall provide a written and signed certification to the TCB that all statements it makes in its request for equipment authorization are true and correct to the best of its knowledge and belief. Section 2.911(d) (2) CERTIFICATION FOR ANTI DRUG ABUSE ACT COMPLIANCE The applicant shall provide a written and signed certification to the TCB that the applicant complies with the requirements in 1.2002 concerning the Anti-Drug Abuse Act of 1988. Response The certifications from the applicant for the above requirements are provided in the exhibit 1, 731 Form, page 3. Section 2.911(e) QUALIFICATION OF ENGINEERS The Commission or TCB may require the person signing the test data to submit a statement showing that they are qualified to make or supervise the required measurements. Response Dr. Qin Yu received a Ph.D. degree in 1996 from The Ohio State University, Department of Electrical Engineering. Dr. Yu has more than 26 years of industry experience in defining the product regulatory requirements, developing the associated test plans and conducting the required tests including the required FCC tests for radio equipment certification and Class I and Class II permissive changes. Dr. Yu is the lead engineer for the FCC filing of the subject product at Nokia. Section 2.911(e) CERTIFICATION OF TECHNICAL TEST DATA Technical test data submitted to the TCB and to the Commission shall be signed by the person who performed or supervised the tests. The person signing the test data shall attest to the accuracy of such data. Page 1 of 1

Applicant: Nokia Solutions and Networks, OY Federal Communications Commission Authorization and Evaluation Division

-4 -

FCC ID: 2AD8UASMR24FA3UB Permanent Confidentiality Request Letter Date: October 23, 2020 Confidentiality Request for:

FCC ID: 2AD8UASMR24FA3UB To Whom It May Concern, Pursuant to FCC 47 CRF 0.457(d) and 0.459, Section 10, Nokia Solutions and Networks requests that a part of the subject FCC and/or IC application listed below be held permanently confidential and permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Exhibit 5 Exhibit 6 Exhibit 7 Exhibit 8 Exhibit 9 Exhibit NDA-

Tune-Up Procedure and Drive levels Operating Description, Circuitry for Determining Frequency Complete Circuit Diagrams Instruction Book Internal Photographs of the Equipment Operational Description NDA Confidentiality of the User Manual is maintained by requiring that any party that is supplied a user manual must first sign a non-disclosure agreement. Currently only cellular system operators have access to these manuals. Internal photos are kept confidential by virtue of the fact that the end product is a non-

consumer product, certified and housed in a sealed enclosure, and is only accessible by trained /approved maintenance personnel. Further, the Applicant has spent substantial effort in developing this product, some aspects of which are deemed to be trade secret and proprietary. Having the subject information easily available to our competitors in this market would negate the advantage we have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Sincerely yours, Terry Schwenk Title: R&D Engineer Regulatory Compliance Nokia Solutions and Networks, OY TEL: 1.847.809.6952 FAX: 1.224.248.8208 E-mail: terry.schwenk@nokia.com Nokia Solutions and Networks, OY

Applicant: Nokia Solutions and Networks, OY Exhibit 3 FCC REQUIRED INFORMATION

-11 -

FCC ID: 2AD8UASMR24FA3UB The following information is presented in the content and format requested by the FCC:

Section 2.1033 (c)(1):

The full name and mailing address of the manufacturer of the device and the applicant for certification Manufacturer:

Applicant:

60563 Nokia Solutions and Networks, OY 2000 Lucent Lane Naperville, Illinois Attention: Terry P. Schwenk Nokia Solutions and Networks, OY 2000 Lucent Lane Naperville, Illinois Attention: Terry P. Schwenk Phone: (847) 809-6952 email: terry.schwenk@nokia.com 60563 Section 2.1033(c)(2): FCC Identifier:

Section 2.1033(c)(4):Type or types of emission: 97M5G7W, 198MG7W (a two carrier aggregate of 97M5G7W) 498MG7W (a five carrier aggregate of 97M5G7W) 2AD8UASMR24FA3UB This Transceiver System supports the 3GPP 5G New Radio and other LTE technologies. The subject of this certification request is for operation using the 3GPP 5G New Radio modulation format in QPSK, 16QAM and 64QAM (LTE-TDD) for one to seven carriers. The transceiver can be configured for the various transmit configurations by varying the digital information provided from the baseband channel electronics alone without physical, hardware or circuit changes to the transceiver. Section 2.1033(c)(5): Frequency range, Transmit / Receive: 24.25-24.45 GHz and 24.75-25.25 GHz Section 2.1033(c)(6): Range of operating power values or specific operating power levels, and description of any means provided for variation of operating power. Response:

The Nokia AWEUC/D 5G AirScale mmWave Radio, FCC ID: 2AD8UASMR24FA3UB is capable of producing two 52 dBm EIRP transmit beams (horizontally and vertically polarized) for a total transmit power of 55 dBm EIRP. Each of the beams can be configured to provide one to seven carriers of 97M5G7W emissions designator in the Upper Microwave Flexible Use Service spectrum (24.25 25.25 GHz) as allowed under 47CFR Part 30. The operational parameters are one or two 97M5G7W carriers in the 24.25-24.45 GHz portion of the US n258 spectrum and one to five 97M5G7W carriers in the 24.75 25.25 GHz portion of the spectrum. The total RF power will be divided among the one to seven carriers anywhere in the two portions of the spectrum. Thus, any carrier configuration can provide up to the specified power of 52 dBm EIRP per polarization for a total combined power of 55 dBm EIRP RF Power control of the AWEUC/D transceiver is accomplished via software control of the data stream and the RF power gain. The software controls the RF power gain through the RF transmit path with a Digital Step Attenuator

(DSA) to maintain the correct RF power of the AWEUC/D over frequency and temperature. The DSA gain control has a resolution of 0.25 dB per step and an overall range of 11 dB. Separate circuitry is provided to inhibit the carrier output if a synthesizer in the transmit path loses lock. Nokia Solutions and Networks, OY Applicant: Nokia Solutions and Networks, OY Exhibit 3 FCC REQUIRED INFORMATION continued

-12 -

FCC ID: 2AD8UASMR24FA3UB Section 2.1033(c)(7): Maximum power rating as defined in the applicable part (s) of the rules. Response:

This product can produce two individual 52dBm EIRP beams (158.5 W EIRP each). The sum of these two 52 dBm EIRP beams results in the Maximum Total Power of 55 dBm EIRP (316.25W EIRP) The maximum continuous RF output power available is the sum of the horizontal and vertical transmit beams generated by individual 8x12 antenna assemblies. There are no antenna connections. Each antenna assembly distributes 27 dBm of RF power with an overall gain of 25dBi. This results in a radiated power of 52dBm EIRP per antenna assembly for a Total Radiated Power of 55dBm EIRP Section 2.1033 (c)(10): A description of all circuitry and devices for determining and stabilizing frequency. Response:

The Nokia AWEUC/D 5G AirScale 24 GHz mmWave Radio, FCC ID: 2AD8UASMR24FA3UB is a 1400 MHz instantaneous bandwidth digital transceiver designed to operate in the Part 30 Upper Microwave Flexible Use Service spectrum. The FPGA to A/D transceiver in this product is designed to utilizes 50 and 100 MHz carrier emission bandwidth 5G-NR signals which are up-converted to the overall n258 24.25-25.25 GHz Band. The frequency stability of the 5G-NR carrier frequency is maintained with an accuracy better than the rated 0.05 ppm by reference frequency locking the phase-locked-loop (PLL) circuitry to a stable internal reference oscillator. External reference timing is provided by locking to an external frequency disciplined reference signals. Separate circuitry is provided to inhibit the carrier output if a synthesizer in the transmit path loses lock The AWEUC/D 5G AirScale 24 GHz mmWave Radio is supplied its frequency discipline synchronization for reference from the baseband information source which is GPS capable. Nokia Solutions and Networks, OY

Applicant: Nokia Solutions and Networks, OY

-36 -

FCC ID: 2AD8UASMR24FA3UB EXHIBIT 11: DETAILED DESCRIPTION OF THE MODULATION SYSTEM SECTION 2.1033(c) (13) For equipment employing digital modulation techniques, a detailed description of the modulation system to be use, including response characteristics of any filters provided, and a description of the modulating wavetrain, shall be submitted for the maximum rated conditions under which the equipment will be operated. Response The Nokia AWEUC/D supports the LTE Based 5G New Radio access technology defined in 3GPP, including multiple-

input multiple-output (MIMO). The 5G-NR access technologies are being developed and standardized under 3GPP TS 38. The status of Release 16 is that it is the evaluation stage with Release 16 scheduled to be issued in Q4 of 2018. The latest released document detailing modulation was:

3GPP TS 38.211 V15.2.0 (2018-06) 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NR; Physical channels and modulation (Release 15) This above standard incorporates coding for QPSK, 16QAM, 64QAM and 256QAM so the overall spectral appearance is similar to LTE. Additional information is in Exhibit 6 of this application. Nokia Solutions and Networks, OY

Applicant: Nokia Solutions and Networks, OY Federal Communications Commission Authorization and Evaluation Division

-5 -

FCC ID: 2AD8UASMR24FA3UB Agent Authorization Letter Date: October 23, 2020 We, Nokia Solutions and Networks - OY, declare that Raymond Johnson, Walter Majkowski, Steven Gordon and Qin Yu of Nokia Global Products Compliance Laboratory (GPCL) are authorized agents to sign applications pertinent to FCC and Industry Canada applications. These employees of Nokia Global Product Compliance Laboratory are authorized to make representations to the FCC, Industry Canada and their respective Telecommunications Certified Body (TCB) agents on our behalf. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC and Industry Canada's regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by the TCB, still resides with Nokia Solutions and Networks. I hereby certify on behalf of Nokia Solutions and Networks ("Applicant") that neither Applicant nor any party to the application (officers, directors, and 5% shareholders) is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 198821 U.S.C. 853a. Sincerely yours, Terry Schwenk Title: R&D Engineer Regulatory Compliance Nokia Solutions and Networks, OY TEL: 1.847.809.6952 FAX: 1.224.248.8208 Email: terry.schwenk@nokia.com Nokia Solutions and Networks, OY

Applicant: Nokia Solutions and Networks, OY

-10 -

FCC ID: 2AD8UASMR24FA3UB EXHIBIT 2 QUALIFICATIONS and CERTIFICATIONS October 30, 2020 Section 2.911 (d) QUALIFICATION OF ENGINEERS Section 2.911 (d) Technical test data shall be signed by the person who performed or supervised the tests. The person signing the test data shall attest to the accuracy of such data. The Commission may require such person to submit a statement showing that he is qualified to make or supervise the required measurements. Walter Steven Majkowski is a Member of Technical Staff at Nokia Global Product Compliance Laboratory which is part of Nokia Bell Laboratories. He holds a BSEE from New Jersey Institute of Technology and was trained in the FCC testing procedures. Mr. Majkowski is a Lead engineer for the filing of Wireless Base station products at Nokia Bell Laboratories. Mr. Majkowski is a NARTE certified EMC engineer, Certificate number EMC-001859-NE, and has over forty years of EMC design and testing experience. Mr. Majkowski has previously filed over sixty four different wireless products with the FCC and Canada. Raymond J. Johnson Technical Manager Nokia Bell Labs Nokia Global Products Compliance Laboratory Murray Hill, NJ 07974 Phone: +1 908 679 6220 SECTION 2.911 (e)(g) CERTIFICATION OF TECHNICAL TEST DATA Technical test data submitted to the TCB and to the Commission shall be signed by the person who performed Section 2.911(e) or supervised the tests. The person signing the test data shall attest to the accuracy of such data. The Commission or TCB may require the person signing the test data to submit a statement showing that they are qualified to make or supervise the required measurements. Section 2.911(g) Signed, as used in this section, means an original handwritten signature; however, the Office of Engineering and Technology may allow signature by any symbol executed or adopted by the applicant with the intent that such symbol be a signature, including symbols formed by computer-generated electronic impulses. I hereby certify that the test data are the results of tests performed or supervised by me. Walter Steven Majkowski NCE Member Technical Staff Nokia Bell Labs Nokia Global Products Compliance Laboratory Murray Hill, NJ 07974 Phone +1 908 608 8004 email: steve.majkowski@nokia-bell-labs.com Nokia Solutions and Networks, OY