|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2019-04-24
|
|
1 2 3
|
2018-09-17
|
|
1 2 3
|
2016-03-09
|
|
1 2 3
|
Applicant's complete, legal business name |
Nokia Solutions and Networks, OY
|
|
1 2 3
|
FCC Registration Number (FRN) |
0024290108
|
|
1 2 3
|
Physical Address |
2000 W. Lucent Lane
|
|
1 2 3
|
Naperville, Illinois 60563
|
|
1 2 3
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
t******@us.bureauveritas.com
|
|
1 2 3
|
c******@curtis-straus.com
|
|
1 2 3
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AD8U
|
|
1 2 3
|
Equipment Product Code |
FW2IADPM01
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
T******** S******
|
|
1 2 3
|
Title |
R&D Engineer
|
|
1 2 3
|
Telephone Number |
84780********
|
|
1 2 3
|
Fax Number |
22424********
|
|
1 2 3
|
E-mail |
t******@nokia.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/21/2019 |
| 1 2 3 | 03/16/2019 |
| 1 2 3 | 09/05/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Nokia FW2IA LTE Module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Does not apply |
| 1 2 3 | Limited Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 | Original Equipment |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | CLASS II PERMISSIVE CHANGE to enable LTE band 66 NB-IoT In-band for 5MHz/10MHz/15MHz/20MHz bandwidths and NB-IoT Guard-band for 10MHz/15MHz/20MHz bandwidths.
Class II Permissive Change for adding carrier aggregation techniques for contiguous and non-contiguous channels by software enabling.LTE supports 5 /10 / 15 / 20 MHz modes and 10 + 15 MHz / 20 + 20 MHz non-contiguous, 20 + 20 MHz contiguous Carrier Aggregation (CA) mode.
Output power listed is EIRP. Limited Modular Approval for evaluated specific BTS (NOKIA, S/N: EB155110008 & EB154810036) as described in this filing or same series of host with similar RF Characteristic. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating instructions for satisfying RF exposure compliance. This grant is valid only when this module is sold to OEM integrators. OEM integrators must ensure that end users are not provided with instructions to remove or install this module. Only those antenna listed in this filing can be used. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 1 2 3 | Class II Permissive Change for adding carrier aggregation techniques for contiguous and non-contiguous channels by software enabling.LTE supports 5 /10 / 15 / 20 MHz modes and 10 + 15 MHz / 20 + 20 MHz non-contiguous, 20 + 20 MHz contiguous Carrier Aggregation (CA) mode.
Output power listed is EIRP. Limited Modular Approval for evaluated specific BTS (NOKIA, S/N: EB155110008 & EB154810036) as described in this filing or same series of host with similar RF Characteristic. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating instructions for satisfying RF exposure compliance. This grant is valid only when this module is sold to OEM integrators. OEM integrators must ensure that end users are not provided with instructions to remove or install this module. Only those antenna listed in this filing can be used. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 1 2 3 | Output power listed is EIRP. Limited Modular Approval for evaluated specific BTS (NOKIA, S/N: EB155110008 & EB154810036) as described in this filing or same series of host with similar RF Characteristic. The antenna(s) used with this module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end users must be provided with transmitter operating instructions for satisfying RF exposure compliance. This grant is valid only when this module is sold to OEM integrators. OEM integrators must ensure that end users are not provided with instructions to remove or install this module. Only those antenna listed in this filing can be used. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|
1 2 3
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
|
1 2 3
|
Name |
K******** L******
|
|
1 2 3
|
R******** C******
|
|
1 2 3
|
E**** L******
|
|
1 2 3
|
Telephone Number |
+886-******** Extension:
|
|
1 2 3
|
+886-******** Extension:
|
|
1 2 3
|
886-3******** Extension:
|
|
1 2 3
|
Fax Number |
+886-********
|
|
1 2 3
|
+886-********
|
|
1 2 3
|
+886-********
|
|
1 2 3
|
E-mail |
k******@tw.bureauveritas.com
|
|
1 2 3
|
r******@tw.bureauveritas.com
|
|
1 2 3
|
e******@tw.bureauveritas.com
|
|