Timco Engineering Inc. FCC Authorized Telecommunications Certification Body (TCB) Nokia Global Product Compliance Laboratory 600-700 Mountain Avenue, Room 5B-111 February 07, 2021 Timco Engineering Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 Subject: Application for New Equipment Certification Approval for Nokia: AHDB AirScale 2T4R B8 Sub-Band 160W under Certification Number FCCID: VBNAHDB-01 Dear Examiner:
The Nokia AHDB AirScale 2T4R B8 Sub-Band 160W is a 2 port radio head that transmits 40 Watts per port over the B8 spectrum (936.5 - 939.5 MHz). This product supports up to 2x1.4 MHz and 1x3.0 MHz LTE carriers, plus up to 3x.2 MHz NBIoT carriers utilizing QPSK, 16 QAM, 64QAM and 256QAM modulation formats. The 2 individual transmit ports are identical in design, rated power and performance. This authorization request is for the AHDB AirScale 2T4R B8 Sub-Band 160W (AHDB) utilizing the bandwidths (BW), modulations and emission designators cited over the B8 spectrum 936.5 - 939.5 MHz, subject to PART 27 MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES. The measurement exhibits attached to this application demonstrate full compliance with FCC Part 27, Subpart P, following the procedural requirements specified in FCC Part 2, Subpart J Equipment Authorization Procedures. The data, summarized below, is in the form presently used by the Commissions Radio Equipment List. Equipment Identification:
Rules Part Number:
Frequency Range:
Output Power:
Frequency Tolerance:
Emission Designator:
VBNAHDB-01 Part 27 Subpart P, Transmit 936.5 - 939.5 MHz 80 Watts Maximum Conducted per Unit (2T4R), 40 W per Antenna Port 0.05 ppm 1M09F9W, 2M70F9W, and 200kF9W Attached are the FCC Form 731 (Application for Equipment Authorization Radio Frequency Devices), the required measurement data and exhibits specific to this request for the AHDB AirScale 2T4R B8 Sub-Band 160W (AHDB). The technical or non-technical contact at Nokia will comply with any request for additional information should the need arise. The attached exhibits with the applicable FCC Rule section are assembled and presented in accordance with the Table of Contents attachment. Should there be any questions or procedural issues please feel free to contact me by email and/or phone. Public Page 1 of 3 Sincerely, Raymond J. Johnson Technical Manager Primary Administrative Contact Global Product Compliance Laboratory Building 5B-111 600 Mountain Avenue Murray Hill, NJ 07974 Phone: 908-679-6220 email: ray.johnson@nokia-bell-labs.com Filing Engineer Steve Gordon Global Product Compliance Laboratory Building 5A-107 600 Mountain Avenue Murray Hill, NJ 07974 Phone 908-679-5014 email: steve.gordon@nokia-bell-labs.com Att. Table of Contents for the AHDB AirScale 2T4R B8 Sub-Band 160W (AHDB) Product Certification Report Public Page 2 of 3 2 3 4 5 6 7 8 8a 9 TABLE OF CONTENTS Cover Letter Confidentiality Request Letter Agent Authorization Letter Required Exhibits:
Exhibit Number FCC Rule Number 1 Section 2.1033(a) Description FCC Form 731 Section 2.911(e) Qualifications and Certifications Section 2.1033(c)(1,2, 4-7) Manufacturers, FCC Identifier, Emission, Range of RF Power & Frequency Section 2.1033(c)(11) Drawing of the Identification Label Active Circuit Devices Drive Levels, Tune-Up procedure Section 2.1033(c)(8,9)
(Confidential) Section 2.1033(c)(10,13)
(Confidential) Section 2.1033(c)(10)
(Confidential) Section 2.1033(c)(3)
(Confidential) Block Diagram, Operational Description, Circuitry for determining frequency Complete Circuit Diagrams Installation Manual Section 2.1033(c)(3) Manual - NDA (Non-Disclosure Agreement) Section 2.1033(c)(12)
(Confidential) Internal Photographs of the Equipment External Photographs of the Equipment Photographs of the Test Setups FCC Test Report RF Exposure Test Report Section 2.1033(c)(21) Section 2.1033(c)(12) Section 2.1033(c)(14) 10 11 12 13 14 Section 2.1033(c)(10) Parts List
(Confidential) Section 2.1033(f) Public Page 3 of 3