FCC ID: 2AJYRNM01323785 Stand Magnetic Charger

Legal FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient or relocate the receiving antenna.

+ Increase the separation between the equipment and receiver.

+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

+ Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance cm between the radiator & body. Statement for IC This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) L appareil ne doit pas produire de brouillage;

(2) L! appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement. Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10cm between the radiator & body. Cet quipement est conforme aux limites d'exposition IC dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10cm entre le radiateur et la carrosserie.

FCC ID and IC Label Location 15mm*15mm FCC ID: 2AJYRNM01323785 IC: 27646-NM01323785 HVIN: NM01323785 15mm*15mm FCC ID: 2AJYRNM01323785 IC: 27646-NM01323785 HVIN: NM01324485

Nomad Goods, Inc 1187 Coast Village Rd., #638, Santa Barbara, CA 93108, United States Agent Authorization Company: Nomad Goods, Inc Address: 1187 Coast Village Rd., #638, Santa Barbara, CA 93108, United States Product Name: Stand Magnetic Charger Model Number(s): NM01323785, NM01324485 Product Description: Stand Magnetic Charger We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Tane Martin Title:

Sr. Product Manager Company: Nomad Goods, Inc Date: Aug. 19, 2022

Nomad Goods, Inc 1187 Coast Village Rd., #638, Santa Barbara, CA 93108, United States Declaration Letter Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AJYRNM01323785 8/25/2022 Pursuant to KDB 680106 of the Nomad Goods, Inc Hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved usinga PAG for equipment approved using certification to address RF exposure compliance. 1) Power transfer frequency is 0.1101-0.205MHz which is less than1 MHz 2) Output power from each primary coil is equal to 10 watts max 3) The system consist of one source primary coils, charging one clients. 4) Client device is placed directly in contact with the transmitter 5) The EUT is a mobile device. 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yours sincerely, Company Officer: Tane Martin Telephone Number: +1(805)403-7091 Email: tane@nomadgoods.com

Nomad Goods, Inc 1187 Coast Village Rd., #638, Santa Barbara, CA 93108, United States Aug. 19, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2AJYRNM01323785 Models: NM01323785, NM01324485 To Whom It May Concern:

We, The Nomad Goods, Inc hereby declare that the model : NM01323785 is identical with the model : NM01324485, The test Model is a black shell, the series model is a white shell, and the appearance color is different. Except for the different above, no other modification is performed. Sincerely, Nomad Goods, Inc Signature:

[Tane Martin, Sr. Product Manager]

Nomad Goods, Inc 1187 Coast Village Rd., #638, Santa Barbara, CA 93108, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AJYRNM01323785 Date: Aug. 19, 2022 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Tane Martin Title: Sr. Product Manager