FCC ID: 2A8FY-BEFLO-ATN Tenon Control Box

Nonet Inc. CONFIDENTIAL & PROPRIETARY Project Name: Tenon Product Specification - Main Board Box Rev.1.0 The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 1/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY Modification History NO. Date Reviser(s) Changed pages Author(s) Approved Comments 01 2022/07/27 1.0 NA Chris Li Chris Li Creation The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 2/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY Table of Contents 2. 1. Introduction ........................................................................................................... 4 Scope .......................................................................................................... 4 1.1. 1.2. Confidentiality ............................................................................................ 4 Features.................................................................................................................. 4 Firmware .................................................................................................... 4 2.1. List of mandatory components .................................................................. 4 2.2. Input power .................................................................................... 4 2.2.1. 2.2.2. WiFi 6 ............................................................................................. 4 Bluetooth 5.0 ................................................................................. 4 2.2.3. USB Type-C ..................................................................................... 4 2.2.4. USB Type-A ..................................................................................... 4 2.2.5. 3.5mm Audio Aux ........................................................................... 5 2.2.6. Capacitive touch OLED display ....................................................... 5 2.2.7. 3. Mechanical requirement ........................................................................................ 5 Cosmetic and quality standards for injection molded plastic parts .......... 5 Surface quality ............................................................................... 5 Surface Area Definitions ................................................................ 6 Physical specifications ................................................................................ 6 Overall dimensions ......................................................................... 6 Explode drawing ............................................................................. 7 Six viewer drawing ......................................................................... 7 4. Packaging specification .......................................................................................... 8 4.1. Carton specifications .................................................................................. 8 Carton label & printing sample .................................................................. 8 4.2. 5. Standards ............................................................................................................... 9 6. Mechanical environment tests............................................................................... 9 7. Reliability and lifetime ........................................................................................... 9 3.2.1. 3.2.2. 3.2.3. 3.1.1. 3.1.2. 3.1. 3.2. The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 3/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY 1. Introduction 1.1. Scope This document is the Product Specification Document for the Nonet beflo Main Board Box referred to as theproduct in this document. The Main Board Box is a function control box with WiFi 6, Bluetooth 5.0, one USB Type-A (Charging), one USB Type-C (Charging), one 3.5mm Audio Jack and a Capacitive touch OLED Display. 1.2. Confidentiality The information in that document is part of the knowledge of Nonet Inc.

(referred to as Nonet in this document). It must be considered confidential. All users of this document are responsible for taking all precautions so that this document is never read by any unauthorized user. 2. Features 2.1. Firmware Adjustment Range, Home height range: 750mm-1190mm Controller: Controlled by APP with Bluetooth connection, also can be controlled by touch panel with OLED. Cloud: Data collected, bugs and errors reported, and release the latest version for updating. Connectivity features: Bluetooth for usage with smartphone app/

sedentary reminder condition. 2.2. List of mandatory components Nonet defines a list of main components that must be used by the hardware design. IEEE 802.11 1T1R a/b/g/n/ac/ax 5GHz and 2.4GHz Support uplink and downlink MU-OFDMA Supports 1x1 20MHz bandwidth, MCS0~8 in 2.4G/5GHz band 2.2.1. Input power Support Input AC Rated Voltage with full range from 100-240V, 50-60Hz Rated Input Voltage 2.2.2. WiFi 6 2.2.3. Bluetooth 5.0 Low Energy, transform long-distance, data transfer 2Mbps. 2.2.4. USB Type-C Type-C port allows to charge (5V/3A 15W) 2.2.5. USB Type-A Type-A port allows to charge (5V/2A 10W) The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 4/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY 2.2.6. 3.5mm Audio Aux Support One 3.5 microphone/stereo headphone jack for speakers and headsets. 2.2.7. Capacitive touch OLED display The display is 3.12" OLED panel in white color and resolution of 256 x 64 dots, refresh rate 105Hz. The touch is capacitive type and support single point touch. The front cover is made by translucent black glass with hardness up to 7H and added surface treatment including anti-glare and anti-

fingerprint. 3. Mechanical requirement 3.1. Cosmetic and quality standards for injection molded plastic parts 3.1.1. Surface quality The surface quality of Tenon shall be compliant to beflo outline drawing, applied to each surface and feature based upon its cosmetic classification. The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 5/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY 3.1.2. Surface Area Definitions 3.2. Physical specifications 3.2.1. Overall dimensions Weight447 10 g Size281.32mm (L) x 184.16mm (W) x 72.98mm(H) The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 6/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY 3.2.2. Explode drawing 3.2.3. Six viewer drawing The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 7/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY 4. Packaging specification 4.1. Carton specifications Each layer of the carton can put 5 samples, there are two layers in total. 4.2. Carton label & printing sample The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 8/9 Nonet Inc. CONFIDENTIAL & PROPRIETARY 5. Standards RoHS, UL, FCC, and BSMI are certified as minimum requirements. If any certificate is mandatory but not listed here, please list them and have Nonet Marketing and Engineering teams noticed and approved. 6. Mechanical environment tests Test Description Storage (Non-Operational) Test Conditions, Limits, References Phase 1: Hot Condition: +65 C, uncontrolled RH Ramp: 1 Hour Up, 72 Hours Dwell, 1 Hour Down Number of Cycles: 1 Phase 2: Hot/Humid Condition: +40 C, 90% RH Ramp: 1 Hour Up, 72 Hours Dwell, 1 Hour Down Number of Cycles: 1 Phase 3: Cold Condition: -40 C, uncontrolled RH Ramp: 1 Hour Down, 72 Hours Dwell, 1 Hour Up Number of Cycles: 1 Test duration (reference): Approximately 222 Hours Acceptance Criteria After test completion, the unit must pass all functional tests. Note and photograph (with SN) any cosmetic damage to the unit enclosure. After the test, there shall be no obvious color change on the test samples

(Cases, Ethernet Jacks, etc.) Sample quantity 1 carton 7. Reliability and lifetime Warranty issue: 3years. The information contained herein is the property of Nonet Inc. and shall not be reproduced, copied, or used for any purpose without permission. 9/9

3 F., No. 59-1, Sec. 1, Xinsheng N. Rd., Zhongshan Dist., Taipei City 10457, Taiwan (R.O.C.) October 11, 2022 DFS Device Declaration Letter To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: 2A8FY-BEFLO-ATN

(1) DFS Device: Master Client with Radar detection capability Client without radar detection capability N/A

(2) Active / Passive Scanning, ad-hoc mode access point capability Frequency Band Active Scanning passive scanning Ad Hoc Mode or Access point

(MHz)

(the device can

(where the device WIFI Direct capability transmit a probe is can listen only capability

(beacon)) with no probes) 5150-5250 Yes , No Yes , No Yes , No Yes , No 5250-5350 Yes , No Yes , No Yes , No Yes , No 5470-5725 5725-5850 Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No Yes , No

(3) Country code selection ability - Yes , No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) ___________________________________________________________________________________ ___________________________________________________________________________________

(4) Meet 15.202 requirement- Yes , No Please check below:

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, No Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled) Sincerely, Howard Su Nonet Inc. Manager Tel No: +886936105949 E-mail: howard@thenonet.com

RF 160, lssue 04

(on manufacturer's company letter hea;ing) Declaration of Authorization Ngnet l.r.r,c,. 3-E*.N.s,.5.9:1,.S..ec..l...Xnshe.!s.N,.8d.,.Zh.s.rr.ssh?n.8r.sJ Tarp.ei.ql!y I.arw.a!

Name:

Address:

City:

Country:

Declare that:

Name Representative of agent:

Agent Company name:

Address:

Cityl Country Rima.!9e.,.,.(')

.Qemas-s-I--e..9h.n9l9sv--Q-9,rp.cEtlgn N9,.1..0-..1.?.09.?,.Lianf u-S-LEe!,--L!rzh!r. pist.. I_a.,oJ_u_an.C_.(y.._3_3..9{.9 LailYar.R,Q,9, is authorized to apply for Certification of the following product(s):

Productdescription:I_engn.'.C.gnlf 9!._B_o..X Typedesignationr LligJ.P.l. Trademark _B.C!g Validity/ expiry date on our behalf. ...10.03.2022............... .....Taiwan..............--.. Hel]lad.su,!l Date:

City:

Name:

Function:r

(1): Requi,d

(2): ForFCC il nuslbethe Gmrtoe @de'ot nol qthe adhotued ago . fot FCC Wlbdbn

FCC, Request for non,disclosure RF_501 lssue 7 Date: 1g-Ocl10 Page 1 of 1 Company Name Address Dist City:

Country:

Nonel lnc. 3 F., No. 59-1, Sec- '1, Xinsheng l{. Rd., Zhongshan TaipeiCity To: Teleticaiion B.V. Oept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Nethedands Subiect: Request for confidentiality FCC lD: 2A8FY-BEFLO-ATN Retercnce number: ###ll##

Dear FCC TCB,

'1. Long-Term Confidenliality Bill(s) of Material Pursuant to 47 CFR Section 0 459(a) & (b) we hereby requests non-disclosure and confidenttal heatment ofthe following materials submitted rn supporl of FCC certification applicahon:

n x Above mate als contain secrets, proprietary and technical information, which would customarily be guaded from competitors under 47 CFR, sectior, 0.457 (d)(2). Disclosure or publication or any portion of this company confdenlial material to other partles could cause substantial competttive hanm and provde unjustified benefits for competitors. E Tune.up Procedure Operational Description Schematic Diagrams Block Diagrams x x 2. Short-Teim Confdondallty (sTc) Pursuant tc Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR 52.803 and the importation rules in 47 CFR 52.1204, appticant hereby .equests Short-Term Confidential treatment of the following materials (note l):

! lntemalPhotos E Usels Manual E Test Set-up Photos n E(ernalPhotos Justification:

Planned Release Date STC:

(noles2 3,4,5) lfnodale is given,45 days from grantdate willbe used. Oale: 2022ho13 A-u*

1) A dounent or typa of ctuu@nt can onty haw ONE ,pe ot confrdenbahtyl 2) Shon-Tam confidenialiy is in ptincipta lot 45 days tun date ot grant it cdn E axEnded na, 3 tintos (total tine 180 days n )t 3) FCC nust be hfomd whon matu.tkg begins ead@r. 4) Relaase lakes place aulonalically thus extension nusl E raquasted in tin Telefication does not rcfiihd Wu of dlist 5) Requesl lot exlensb. u fot r.laase nust be received by Teteficatioh at least 7 days betorc date ol xtual nidiethg or betate expnaicn altlb sTc patjod