RPTR1345 Wireless 345MHz Repeater FCC ID Label and Location ID Label/Location Info

 

1 2 3 4 REV B REVISIONS DESCRIPTION PRODUCTION RELEASE DATE 9/27/2016 APPROVED ECO-TBD NOTES: (UNLESS OTHERWISE SPECIFIED) 1. MFG. PROCESS: PRINTED LABEL OR PAD PRINTING 2. MATERIAL: FASSON 2MIL PET(POLYESTER)NTC/S333/BG50#WH, HIGH GLOSS WHITE UL#MH20557 OR EQUIVALENT. PAD PRINTING INK: BLACK, LINEAR P/N 213337-002 3. USE ART WORK #10010161.EPS Model: 2GIG-PANIC1-345 1351-14-4545

(01)07899106700845 10002401x1 1.00 [25.4]

NOM: 1402CE04268 IFETEL: RCPLI2G14-1032 FCC ID:WQD-PANIC1345 IC:7794A-PANIC1345 Made In China 1.25 [31.7]

300mA 2GIG-RPTR1-345 INPUT:14V 14500 Li-Ion (3.7V) FCC:XXXXXXX IC:XXXXXX FCC ID: WDQ-RPTR1345 IC ID: 7794A-RPTR1345 CI This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept and interference received, including interference that may cause undesired operation. SA A 3061503 Made in China 10010161B SCALE = 2/1 CONFIDENTIAL STATEMENT:

THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL TO NORTEK SECURITY & CONTROL AND MAY NOT BE COPIED IN WHOLE OR PART WITHOUT AUTHORIZATION OF 2GIG TECHNOLOGIES, INC. NOTED UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE INCHES [mm]:

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

DRAWN

.XX +/- .02 .XXX +/- .010

+/- .5 DEG D. ROBINSON APPROVED DATE 9/27/16 DATE TITLE:

DWG NO. LABEL, REGULATORY 2GIG-RPTR1-345 10010161 B DO NOT SCALE DRAWING SHEET 1 OF 1 A B C D E F D D C C B B 4 4 3 3 NOTES:

NOTES:

(UNLESS OTHERWISE SPECIFIED)

(UNLESS OTHERWISE SPECIFIED) 1 2 TORQUE: 3.5 - 4.0 kfg-cm INSTALL LITEPIPE (ITEM 4) FLUSH TO CASE AS SHOWN IN DETAIL. 3 1 2 2 REV X1 X2 A REVISIONS DESCRIPTION INITIAL RELEASE ADDED ITEM #11 PRODUCTION RELEASE 1 1 DATE APPROVED 7/06/2015 10/05/2015 11/13/2015 ECO-018846 ECO-018995 D D 9 8 7 2 TEXT TEXT FCC/IC Label LABEL INSTALL DETAIL

( 5 )

.55 14.1

.45+

-

.02 11.4 0.0

.00

-

0.5 1.49 37.9 2 4 5 1 6 11 1.03 26.2 10

.71 18.1 PLACE BATTERY FOAM BEFORE INSTALLATION OF PCB ASSY. FLUSH TO CASE SURFACE

+.03[0.8]

SECTION A-A A A A A 2 LITEPIPE INSTALL DETAIL

(SOME ITEMS NOT SHOWN FOR CLARITY) 4 4 3 3

( 2 ) INSERT INSTALL DETAIL

(SOME ITEMS NOT SHOWN FOR CLARITY) BATTERY FOAM DETAIL

(SOME ITEMS NOT SHOWN FOR CLARITY) SEE SEPARATE PARTS LIST SEE SEPARATE PARTS LIST UNLESS OTHERWISE NOTED ALL UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE INCHES [MM]:

DIMENSIONS ARE INCHES [MM]:

TOLERANCES:

TOLERANCES:

DECIMALS ANGLES: 0.5 DECIMALS ANGLES: 0.5

.XX.01 [.3]

.XX.01 [.3]

.XXX.005 [.13]

.XXX.005 [.13]

ROUNDNESS:.005 [.13]

ROUNDNESS:.005 [.13]

FLATNESS: .005 [.13]

FLATNESS: .005 [.13]

CONCENTRICITY:.005 [.13]

CONCENTRICITY:.005 [.13]

MATERIAL:

MATERIAL:

FINISH:

FINISH:

DO NOT SCALE DRAWING DO NOT SCALE DRAWING PROJECT:

PROJECT:

CAD OPERATOR:

CAD OPERATOR:

D. ROBINSON CHECKED:

CHECKED:

APPROVED:

APPROVED:

APPROVED:

APPROVED:

APPROVED:

APPROVED:

APPROVED:

APPROVED:

2 2 DATE DATE 7/06/2015 DATE DATE TITLE:

TITLE:

DATE DATE DATE DATE DATE DATE DATE DATE SIZE:

SIZE:

C C SCALE:

SCALE:

1:1 1:1 ASSY, MECH, 2GIG-RPTR1-345 DRAWING NO.:

DRAWING NO.:

REV.:

REV.:

A 1 OF 1 1 OF 1 10007925 SHEET:

SHEET:

1 1 C C B B A A Product Product DataDataDataData Product Product NTC/S333/

micron ClearClearClearClear PPPPETETETET NTC/S333/

micron Fasson 50505050 micron Fasson BG50#WH Fasson micron NTC/S333/

BG50#WH NTC/S333/BG50#WH Fasson BG50#WH MZ0063 SpecSpecSpecSpec ####:::: MZ0063

(ni) MZ0063

(ni) MZ0063 (ni)

(ni) Modified: 12121212////2007 Modified:

LastLastLastLast Modified:

20072007 Modified:

2007 FACESTOCK FACESTOCK FACESTOCK FACESTOCK A gloss clear polyester with print treated surface for enhanced ink anchorage. Basis Weight:

Caliper:

70 g/m2 10% ISO536 0.050 mm 10% ISO534 ADHESIVE ADHESIVE ADHESIVE ADHESIVE A general purpose permanent, acrylic based adhesive. LINER LINER LINER LINER A super-calendared white glassine paper with converting properties excellent label roll Basis Weight:

Caliper:

80 g/m2 10% ISO536 0.070mm 10% ISO534 PERFORMANCE TYPICAL PERFORMANCE DATADATADATADATA TYPICAL PERFORMANCE TYPICAL TYPICAL PERFORMANCE

(N/25mm)

(N/25mm)

(N/25mm)

(N/25mm) Loop Tack (st,st)-FTM 9: 8.0 20 min 90 Peel (st,st)-FTM 2: 5.0 24 hour 90 Peel (st,st)-FTM 2: 7.5 Minimum Application Temperature: -4C Service 40C~+149C Temperature Range:

-

ADHESIVE PERFORMANCE ADHESIVE PERFORMANCE ADHESIVE ADHESIVE PERFORMANCE PERFORMANCE This is an excellent, general-purpose industrial grade clear adhesive, featuring high initial tack, ultimate adhesion and low adhesive ooze. S333 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where for indirect or incidental contact food, cosmetic or drug products. This product features excellent tear strength, heat resistance, dimensional stability and chemical resistance. This product is suitable for use in a wide range of durable labeling applications. It is UL recognized for indoor/outdoor service. See file # MH20557 for specific details. not does above represent The any guarantee or warranty and the Purchaser must independently determine the suitability of the Purchaser's purposes. products the for PRINTING/CONVERTING PRINTING/CONVERTING PRINTING/CONVERTING PRINTING/CONVERTING The corona treated face material can be printed by the usual printing techniques, giving good print results with UV curing and solvent based inks for PET. Ink testing is always recommended before production. This product can be die cut and stripped at high speeds on most web-fed presses. Harden treated and sharp dies, preferably in flat-bed, are important to ensure smooth conversion. Need avoid too much re-winding tension to causing bleeding. It is suitable for automatic dispensing. Not screen printing oven drier. recommend on the traditional silk SHELF SHELF LIFELIFELIFELIFE SHELF SHELF One year when stored at 232C at 505%

RH. PRACTICAL STATEMENT OFOFOFOF PRACTICAL STATEMENT PRACTICAL USEUSEUSEUSE STATEMENT PRACTICAL STATEMENT As with all pressure sensitive materials, this product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application. APPLICATIONS APPLICATIONS ANDANDANDAND USEUSEUSEUSE APPLICATIONS APPLICATIONS Warranty Warranty Warranty Warranty Shanghai Shanghai Shanghai Shanghai HongHongHongHong KongKongKongKong Guangzhou Guangzhou Guangzhou Guangzhou Beijing Beijing Beijing Beijing Tianjin Tianjin Tianjin Tianjin Chengdu Chengdu Chengdu Chengdu Tel +21 6482 1208 +852 2600 5300 +20 8355 5758 +10 8766 3354 +22 2698 3688 +28 8784 8199 Fax +21 6482 1210 +852 2554 3490 +20 8355 5575 +10 8766 3584 +22 2698 6338 +28 8784 8203 www.cn.fasson.com Information concerning Products are based upon tests believed to be reliable but do not represent a guarantee or warranty. Products are provided on the basis that any Purchaser has independently determined the suitability of the Products and Purchaser's purposes. The Company warrants the products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear within one year of delivery (but not afterwards), upon notification thereof within seven (7) days of such appearance and substantiation that the Products have been stored and applied in accordance with the Company standards, the Company shall within a reasonable period correct such defects by providing a suitable replacement without charge at the Company's plant or at the location of the Products (at the Company's election) provided however, if the Company in its sole discretion determines that replacement is not commercially practical, the Company may issue a credit in favour of the Purchaser in an amount not to exceed the purchase price actually paid for the Products. Any implied warranty of merchantability fitness for particular purpose or other warranty of quality, whether express or implied by law, is hereby excluded to the extend permitted by law. In no event shall indirect or consequential damages including, but not limited to, loss of profit, loss of use or loss of capital. The remedies of the Purchaser set forth herein are exclusive, and the total potential liability of the Company arising out of any contract of or from the manufacture, sale, delivery, resale, installation or use of any products shall not exceed the purchase price of the products upon which liability is based. the Company be liable for any incidental, Shanghai Shanghai Shanghai Shanghai HongHongHongHong KongKongKongKong Guangzhou Guangzhou Guangzhou Guangzhou Beijing Beijing Beijing Beijing Tianjin Tianjin Tianjin Tianjin Chengdu Chengdu Chengdu Chengdu Tel +21 6482 1208 +852 2600 5300 +20 8355 5758 +10 8766 3354 +22 2698 3688 +28 8784 8199 Fax +21 6482 1210 +852 2554 3490 +20 8355 5575 +10 8766 3584 +22 2698 6338 +28 8784 8203 www.cn.fasson.com