WYR, pronounced wire, is designed to allow cyclists, triathletes, and fitness enthusiast a simple means to connect fitness sensors to mobile devices, cycling computers, fitness equipment, and wearables used while exercising. BATTERY CHANGE:
GETTING STARTED 1. Download the Configurez app from the iOS App Store or Google Play store. 2. WYR is shipped in a deep sleep state. To wake WYR place it on the back of your NFC capable phone and move it until WYR wakes as indicated by the beep and double LED flash. For a full listing of the LED functions, please visit the support section at www.npe.fit.
*NOTE: If you have trouble waking the device with NFC, open WYR by removing the cover, and then re-install the cover. This performs a battery reset and wakes WYR. 3. Once awake, pair WYR to the Configurez app for setup and configuration. 4. Once paired, allow all permissions from WYR in your phones settings. 5. WYR comes with mounting accessories including shoe clip, wheel/stem mount, VHB tape, and silicon hold-
er. The following are examples some of the mounting options available for WYR. For use as a cycling cadence sensor, WYR can be mounted by either the supplied VHB tape or silicon hold-
er, as pictured below:
For use as a cycling speed sensor, WYR can be mount-
ed to either the front or rear hub as pictured below:
For use as a footpod, WYR can be attached to your shoe with the supplied shoe clip, as pictured below:
For other cycling applications, WYR can be attached to your bicycle stem as pictured below:
Any Questions?
Please contact us at support@npe-inc.com or visit our Help Center: https://npe-inc.zendesk.com/hc/en-us. Range of WYR To ensure good connectivity between WYR, it should be within 10-20 feet of your sensors and mo-
bile device, wearable, or cycling computer or fitness equipment. IP RATING WYR is water and dust proof to IEC Standard 60529 IPX7. It can be submersed in 1 meter of water for 30 minutes. Prolonged submersion can cause damage to WYR. NOTE: If using WYR as a 5kHz transmitter, we recommend setting WYR on the fitness equipment console for best 5kHz transmission. Battery Caution This product contains a CR2032 coin cell battery. DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. If the battery is swallowed, it can cause severe inter-
nal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think a battery might have been swallowed or placed inside any part of the body, seek immediate medical attention. Radio Frequency Approvals The WYR product has received regulatory approv-
als in the United States (FCC), Canada (IC), and European Union (CE). You must use WYR in accor-
dance with all instructions provided by the North Pole Engineering, which includes installation and/or operating conditions necessary for compliance. United States This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help Europe Hereby, North Pole Engineering declares that WYR is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at http://npe-inc.com/cableinfo/wp-content/up-
loads/2017/11/EU-Declaration-of-Conformity.pdf Frequency range: 2402-2480MHZ Maximum output power: <1mW Canada This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIn-
dustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1) lappareil ne doit pas produire de brouillage;
2) lappareil doit accepter tout brouillage radiolec-
trique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. WARNING: This product can expose you to chemicals including bisphenol A (BPSA) which are known to the State of California to cause cancer and birth defects or other reproduc-
tive harm. For more information go to www. P65Warnings.ca.gov. Radio Certification IDs:
FCCID: XRH-NPE110 IC: 11922A-NPE110