SAFETY TRAINING INFORMATION Our Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications. radio generators RF electromagnetic during transmit mode.This radio is designed for and classified as"Occupational Use Only", meaning it must be used only during the course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population"in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure linits for "Occupational Use Olny ". Inaddition, our Standards and Guidelines wiith regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications.
--IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
--American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
--American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields- RF and Microwave. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to assure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in ares where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electronmagnetic radiation such as hospitals, aircraft, and blasting sites. Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications. radio generates RF Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face,and body-
worn operations are restricted to the approved original acessories (belt chlip). Don't use this device when antenna shows obvious damages. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for(Model:AWR-D6000 , FCC ID : Q9SAWR-D6000 ) to gain further information include SAR Values. This EUT is compliance with SAR for controlled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with a minimum distance of 2.5cm must be maintained when held-to-
a minimum distance of 0 cm. face, and body-worn operations are restricted to the approve doriginal acessories(belt clip), Cet EUT est conforme aux normes SAR pour les limites dexposition contrle de la norme IC RSS-102 et a t test conformment aux mthodes et procdures de mesure spcifies dans les normes IEEE 1528 et IEC 62209. Cet quipement doit tre install et utilis une distance minimale de 2,5 cm. tre maintenu face face, et les oprations portes sur le corps sont limites aux accessoires d'origine approuvs (clip de ceinture), une distance minimale de 0 cm. Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications 20809 Kensington Blvd Lakeville, MN 55044, USA