Package Contents Interface Description Basic Settings SIM card size diagram RST 4G LTE Router Quick lnstallati on Guide Ver:1.0 4GLTE Router Quick Install ation Gui de USB- C Power Cable 4G LTE Router LED Explanation 4 2 RST 1 3 Optional - Set up Cellular Only or Cellular Backup If you already have a device or your Internet comes via an Ethernet cable from the wall or other device, you can set up the router as Cellular Backup mode. The router will choose the Ethernet cable as the priority method and cellular as the backup method to Internet. If the Ethernet cable cannot connect to the Internet, the router will use cellular to Internet automatically. After Ethernet cable return to normal, the router will use RST Standard SIM Micro-SIM Ethernet cable to Internet again. 1.Launch a web browser from the connected computer or device. 2.In the address eld of the web browser, enter http://192.168.66.1. 3.In the Password eld, enter the default password admin and click the Log in button. Nano-SIM Hot swapping is prohibited 4.Select
> Internet > Cellular Type > Cellular Backup. 5.Select the correct Network Mode. 6.Click Save button. Quick lnstallation Guide Ver:1.0 Item. Interface QTY. Descri ption Follow the steps below to connect your router. RST LED Status Description OFF ON LED The router is power off. Green: The router is connected to the Intern et. Orange: The router is not connected to the Internet. Slow ash Green: The router is starting up. Flashing Restore the router to its factory default settings. 1 2 3 4 RST LAN/WAN Type-C Power port Nano SIM Card Slot 1 1 1 1 Press and hold the RST button for six seconds before release to restore therouter to its factory default settings. ln Cellular Only mode, WAN/LAN portsare used as LAN ports. ln CellularBackup mode, the LAN/WAN ports can be used for connecting to a Cable/FT-TH/VDSLIADSL de vice. For connecting the router to power For holding the Nano SIM card. Before the device is powered on, put SIM card into the SIM card slot as shown below. Save Save 1.Ensure that power to the router is off. 2.Align the SIM card with the notch toward the SIM card slot and the chip side up. 3.Gently insert the SIM card into the SIM card slot. 4.Connect the provided power adapter to the power port on the router and to the socket. For Internet access, connect your computer or Wi-Fi device to the router. The default SSID is @NRadio-xxxx (xxxx means the last four digits of Device Code). The default Wi-Fi password is 12345678. WAN Setting Cellular Type Cellular Only Cellular Only Cellular Backup WAN Setting Cellular Type Cellular Backup Network Mode DHCP Client MTU Size 1500 MAC Clone 00:11:22:33:44:55 Quality Certicate FAQ Q1. What should I do if I cannot access the web management page?
Warranty Card 1.NRadio warrants its products contained in their original packaging against defects 1. If the computer is set to a static IP address, change its settings to obtain an IP address in material and workmanship when the products are used normally for their intended Product Name 4G LTE Router automatically. Product Model CC 2. Make sure 192.168.66.1 is correctly entered in the web browser. 3. Use another web browser and try again. 4. Reboot your router and try again. 5. Disable and enable the active network adapter in use and try again. Q2. How do I restore the router to its factory default settings?
purposes. 2.All NRadio limited warranties begin on the date of purchase. Please retain a copy of your receipt as proof of purchase. The length of the limited warranty will vary depend-
ing upon the NRadio product you bought. 3.Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished or used parts may be used to repair the goods. If NRadio, by its sole determination, is unable to replace the defective product, Technical Support Visit nradiowi.com/en/support to get your questions answered and access the latest downloads. If you meet any other problems, please don't hesitate to contact our technical support team: support@nradiowi.com. NRadio Technologies Co., Ltd. Add: Room 408, Ziyun Building, No.211, Xin'an 2nd Rd., Bao'an District, Shenzhen, P.R.C. Tel: 0086-400-6800-186 Web: https://www.nradiowi.net/
1. With the router powered on, press and hold the RST button for 6 seconds before it will replace it with another product. release. Wait the router reboot. 4.The warranty period starts from the date of purchase. All warranty services are 2. Log in to the web management page of the router, and go to Advanced > Backup/-
carried out based on the invoice and warranty card corresponding to the product Flash Firmware, click Reset device and wait until the reset process is complete. provided by the user. If the above proof cannot be provided, the free warranty period Q3. What can I do if I forget my wireless network password?
The default wireless password is printed on the product label of the router.If the default of the product will be calculated from its own production date. 5.The mailing fee for the returned product is the one-way responsibility of the sender. 6.Returning (at your shipping cost) the failed product to the address provided by wireless password has been changed, log in to the router's web management page and NRadio. retrieve or reset your password. Q4. What should I do if my internet speed is slow?
1. Make sure you are inside a network coverage area. 2. Relocate your router and your computer to have a better signal reception-you may be in or near a structure that is blocking the signal. Obstacles (for example, walls, ceilings, and furniture) between the router and other wireless devices decreases the signal strength. This warranty will be governed and construed in accordance with the laws of the country in which the NRadio product purchase took place. Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested and found to comply with the limits for a Class B digital FCC Radiation Exposure Statement device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This This device complies with FCC radiation exposure limits set forth for an uncontrolled equipment generates, uses and can radiate radio frequency energy and, if not installed environment and it also complies with Part 15 of the FCC RF Rules. This equipment must and used in accordance with the instructions, may cause harmful interference to radio be installed and operated in accordance with provided instructions and the antenna(s) communications. However, there is no guarantee that interference will not occur in a used for this transmitter must be installed to provide a separation distance of at least particular installation. If this equipment does cause harmful interference to radio or 20 cm from all persons and must not be co-located or operating in conjunction with any television reception, which can be determined by turning the equipment off and on, the other antenna or transmitter. End-users and installers must be provided with antenna user is encouraged to try to correct the interference by one or more of the following installation instructions and consider removing the no-collocation statement. measures:
Reorient or relocate the receiving antenna. This device complies with Part 15 of the FCC Rules. Operation is subject to the following Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the two conditions:
(1) this device may not cause harmful interference, and receiver is connected.
(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!
Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. QC PASS