FCC ID: 2AHJO-NX679J 5G Mobile Phone (5G NR/LTE/WCDMA/CDMA/GSM/BT/WiFi/NFC)

English | Quick Start Guide Espaol | Gua Rpida Deutsch | Kurzanleitung Franais | Guide de Dmarrage Rapide Italiano | Guida Rapida Trke | Hzl Balang Klavuzu

Polski | Skrcona instrukcja obsugi

Suomi | Pikaopas 1 13 16 19 22 25 27 31 34 37 40 43 Legal notice Copyright Statement Copyright 2021 by Nubia Technology Co., Ltd.. All the copyrights of this document herein belong to Nubia Technology Co., Ltd. Without the written permission of copyright owner, no part of this publication may be excerpted, reproduced, translated by any person or entity in any form or by any means. This document is subject to change without prior notice. Nubia Technology Co., Ltd. keeps the right to make the final explanation to this document. Trademarks Android is a trademark of Google, Inc. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved. All other trademarks remain the property of their respective owners. Statement of Third-party Applications During the installation process of some third-party applications, the issues of repeated restart or abnormal use of software might be caused by incompatibility of the third-party applications, rather than the phone itself. reliable official website. Please download your software upgrade packages from the The installation of a third-party ROM or non-official operating system might bring safety risks and security threats. Nubia Technology Co., Ltd. shall not be liable for these risks and threats caused by upgrade of the operating system. English | Quick Start Guide Your phone at a glance Receiver Front Camera Headphone Jack Noise-reduction MIC Game Boost Mode Volume Buttons Fingerprint Sensor Card Tray NFC Air Outlet Power Button Game MIC Speaker Light/Proximity Sensor Shoulder Trigger(L) Touch Screen Shoulder Trigger(R) USB Type-C Port Rear Camera Air Inlet Air Inlet Flash 1 11 13 15 17 19 21 23 Microphone 1 Inserting the SIM card 1. Insert the end of the eject tool into the hole of the card tray and press firmly until the tray pops out. 2. Put one or two nano-SIM cards into the tray. 3. Push the card tray back into the phone. Note Dimensions of a nano-SIM card: 9 mm*12 mm. Charging the battery Connect the phone to the power adapter using the included USB cable and power adapter. Note Your phone and power adapter might heat up while charging. Use other USB cable or power adapter might decrease the life span of your phone or cause fire, explosion and other hazards. The illustrations of products and accessories in the user guide are all schematic diagrams and are for reference only. Due to product updates and upgrades, the actual product and the schematic diagram may be slightly different, please refer to the actual prod 2 Powering On/Off Phone Make sure the battery is charged before powering on. Press and hold the Power key to turn on your phone. To power off, press and hold the Power key and touch Swipe to power off . Waking Up Your Phone Your phone automatically goes into sleep mode when it is not in use for some time. The display is turned off to save power and the keys are locked to prevent accidental operations. You can wake up your phone by turning on the display and unlocking the keys. 1. Press the Power key to turn the screen on. 2. Swipe up on the screen. Note If you have set an unlock pattern, a PIN, or a password for your phone, youll need to draw the pattern, or enter the PIN/password to unlock the phone. 3 Disposal of your old phone When the wheelie bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. All electrical and electronic products should be disposed of separately from normal household waste via designated collection points provided by government or local authorities. The correct disposal of electrical and electronic products will help protect the environment and human health. Declaration of RoHS 2.0 Compliance Were determined to reduce the impact we have on the environment and take responsibility for the earth we live on. So this document allows us to formally declare that the NX679J, manufactured by Nubia Technology Co., Ltd., fully complies with the European Parliaments RoHS (Restriction of Hazardous Substances) 2.0 Directive 2011/65/EU, with respect to all the following substances:

(1) Lead (Pb)

(2) Mercury (Hg)

(3) Cadmium (Cd)

(4) Hexavalent Chromium (Cr (VI))

(5) Polybrominated biphenyl (PBB)

(6) Polybrominated diphenyl ether (PBDE)

(7) Di(2-ethylhexyl) phthalate(DEHP)

(8) Dibutyl phthalate (DBP)

(9) Benzyl butyl phthalate (BBP)

(10) Diisobutyl phthalate(DIBP) Our compliance is witnessed by written declaration from our suppliers. This confirms that any potential trace contamination levels of the substances listed above are below the maximum level set by EU 2011/65/EU, or are exempt due to their application. The NX679J manufactured by Nubia Technology Co., Ltd. meets all the requirements of EU 2011/65/EU. 4 EU certified frequency band Frequency Band Maximum output power(dBm) 33.50 30.05 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 23.50 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 5 GSM900 DCS1800 WCDMA Band I WCDMA Band VIII LTE Band 1 LTE Band 3 LTE Band 7 LTE Band 8 LTE Band 20 LTE Band 28 LTE Band 34 LTE Band 38 LTE Band 40 LTE Band 41 NR N1 NR N41 NR N78 NSA EN_DC DC_20_N41 DC_28_N41 DC_40_N41 DC_1_N78 DC_3_N78 DC_7_N78 DC_8_N78 DC_20_N78 DC_28_N78 DC_38_N78 DC_40_N78 WLAN Standard Frequency EIRP Power(dBm) WIFI 2.4G 2.4~2.4835GHz WIFI 5G 5.15~5.725GHz 5.725~5.825GHz BLUETOOTH Bluetooth version EIRP Power(dBm) 18.33 16.72 13.82 7.1 6.9 EDR LE NFC Frequency 13.56MHz

<42 dBA/m at 10m Hardware and software The certified hardware version of your phone is NX679J_V1AMB. The certified software version of your phone is NX679J_EUCommon_V4.03. EU Declaration of Conformity (DoC) Hereby, Nubia Technology Co., Ltd. declares that this device is in conformity with the Radio Equipment Directive: 2014 / 53 / EU. For the declaration of conformity, visit http://www.nubia.com/en/support.php?a=download. Hereby, Nubia Technology Co., Ltd. declares that the radio equipment type Model NX679J is in compliance with UK Radio Equipment Regulations

(SI 2017/1206). 6 BE BG CZ DK DE EE IE EL ES FR HR IT CY LV LT LU HU MT NL AT PL PT RO SI SK FI SE UK NI The Wi-Fi function for this device is restricted to indoor use only when operating in the 5150 MHz to 5350 MHz frequency range. Manufacturer's EU Representative:

Nubia Technology Spain S.L. addressCalle Goya 15, 1-Planta, Madrid, 28001 E-mail:support.eu@nubia.com Safety warning To prevent possible hearing damage when using a headset, do not use high volume for long period. Use the earphone carefully. Excessive sound pressure from headsets and headphones can cause hearing loss. Adapter shall be installed near the equipment and shall be easily accessible. The phone's normal operating temperature is 0C ~ 40C. In order to ensure the normal phone functions, do not use this phone outside the temperature range. CAUTION Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

a battery subjected to extremely low air pressure that may 7 result in an explosion or the leakage of flammable liquid or gas. Health and safety The device meets international guidelines for exposure to radio waves. Your device is a radio transmitter and receiver. Its designed not to exceed the limits for exposure to radio waves recommended by international guidelines. The guidelines were developed by the International Commission on Non-

lonizing Radiation Protection (ICNIRP), an independent technical standards body, and include margins designed to assure the safety of all persons, regardless of age and health. These guidelines use a unit of measurement known as Specific Absorption Rate (SAR). The SAR limit for mobile devices is 2.0 W/Kg (Head, Body-worn), 4.0 W/Kg (Limbs) and the highest SAR value for this device when tested for use at the head was 1.262 W/Kg, when tested for use at the body-worn was 1.179 W/Kg and when tested for use at the limbs was 2.806W/Kg. In SAR measurement, the separation distance between the phone and test device is 5mm. As SAR is measured when the device is on its highest transmitting power, the actual SAR of this device while operating normally is typically below the levels shown above. This is because the device automatically changes its power level to ensure it only uses the minimum level required to reach the network. The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. Important safety information For your own health and safety, please follow the radio frequency (RF) radiation exposure guidelines and keep your phone no less than 5 mm away from your body. Failure to do this could mean that your RF exposure exceeds the guideline limits. How to limit your radio frequency (RF) exposure The World Health Organization (WHO) gives the following advice to people who want to limit their exposure to RF 8 radiation Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-free devices to keep mobile phones away from the head and body. Further information on the subject can be obtained from the World Health Organization website at http://www.who.int/peh-emf WHO Fact sheet 193: June 2000. 1. The tests are carried out in accordance with IEC standard IEC 62209-2. FCC Regulatory Compliance FCC Regulations:

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Caution:

Changes or modifications not expressly approved by Nubia Technology Co., Ltd. for compliance could void the users authority 9 to operate the equipment. RF exposure information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. This device is complied with SAR for general population

/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AHJO-NX679J. The SAR limit set by the FCC is 1.6 W/Kg. The highest reported SAR value for this device when using against the head is less than 1.6 W/Kg, for usage near the body-worn is less than 1.6 W/Kg(1g-10mm). Body worn operation SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Hardware and software The certified hardware version of your phone is NX679J _V1AMB. The certified software version of your phone is NX679J_UNCommon_V4.01 10 FCC Caution. 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Hearing-Aid Compatibility (HAC) Your phone is compliant with the FCC Hearing Aid Compatibility requirements. The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the 11 American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids. Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic These ratings are given on a scale from one to four, where four is the most compatible. WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov. 12

Model : NX679J Black 126+2566 5G Mobile Phone UK FCC ID: 2AHJO-NX679J cA -

flail false] MSM) IMEI:123456789012345 i ; A IMEI:123456789012345 Be i By S/N:123456789012 Manufacturer: Nubia Technology Co., Ltd. Address : Room 1801, Building 2, Chongwen Park, Nanshan Zhiyuan, No.3370, Liuxian Rd,Nanshan District,Shenzhen City, Guangdong Province, P. R. China. MADE IN CHINA

Back View

Nubia Technology Co., Ltd. Date:2021-12-20 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 this application. The materials contain Re: Request of Confidentiality for FCC ID: 2AHJO-NX679J To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Nubia Technology Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Nubia Technology Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Description Block Diagram Operational Description Schematics BOM Tune up procedure External Photos Internal Photos Test-Setup Photos User Manual PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory:

Name:Gong Bolin Company name:Nubia Technology Co., Ltd. Address:Room 1801, Building 2, Chongwen Park, Nanshan Zhiyuan, No.3370, Liuxian Rd, Nanshan District, Shenzhen City, Guangdong Province, P. R. China Tel: +86 75586360200 Email: 0016000288@nubia.com

Nubia Technology Co., Ltd. UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID:2AHJO-NX679J

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No 5500 5700 MHz Yes, No 5510 5670 MHz Yes, No passive scanning

(where the device is can listen only with no probes) Yes, No Yes, No Yes, No Yes, No Yes, No Yes, No No Yes, No Yes, No Yes, No Yes, Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code.

(4) Meet 15.202 requirement -

pls check below :

Yes , Yes , No , No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. No Apply , Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Printed Name : Gong Bolin Position : Certification Direct

Nubia Technology Co., Ltd. Date: 2021-12-20 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Nexvoo, Inc, the undersigned, hereby authorizes Miss. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Nexvoo, Inc solely in matters relating to the application for an FCC equipment authorization for FCC ID:2AHJO-NX679J including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Nexvoo, Inc in connection with the Application shall have the same effect as acts of the Nexvoo, Inc. Nexvoo, Inc also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name:Gong Bolin Title:Certification Direct Tel: +86 75586360200 Email:0016000288@nubia.com Company name: Nubia Technology Co., Ltd.

Declaration To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AHJO-NX679J Don't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable Should you have any questions, please feel free to contact me. Signature :

Date:2021/12/20 Contact name:Gong Bolin Title: Certification Direct Company name: Nubia Technology Co., Ltd.