FCC ID: 2AHJO-SW1003 Wearable phone with Bluetooth and WiFi

FCC ID:2AHJO-SW1003 Appearance Touchscreen Microphone Power Button Watchband Clasp Charging Interface Heart Rate Sensor 1 Charge your battery Please align the charging point on the charging dock at the metal point on your device, slightly press till they are firmly clasped and connect the charge cable. Note You can also connect your device to the USB port on your computer via the charge cable. Please note that it is normal that your device and charger might become hot appropriately during charging. Please use your nubia original accessories, otherwise it might affect your devices performance, or even cause dangers such as fire, explosion, etc. 2 Adjust/detach watch strap Be sure to adjust the positions of the holes on the strap according to the circumference of your wrist. If you need to detach the strap, please refer to the illustration. Optional watch strap We offer 2 straps of different lengths for your choice, please choose according to the circumference of your wrist. Watch strap maintenance You can wear it when you wash your hands or when it rains. After being splashed with water, please dry your watch as soon as possible. Do not wet the leather parts to prevent damage to your watch strap. Do not use it when washing cars, swimming, diving, underwater diving and showering. 3 Start your trip to nubia watch First Step: Power on/off Press & hold the power button till the power-on screen appears. Press & hold the power button to turn off your device. Power on Power off Note If your device cannot be normally turned off, please press and hold the power button more than 10 seconds to turn it off and reboot. Second Step: Download For Android users,Please scan the code or search for Nubia Smart Wear in the Google Play to download.Apple users should search for Nubia Smart Wear in the App Store.Visit the website:http://ausp.nubia.com/wear/to download. Note During the process of downloading the app, with nubia watch via Bluetooth. 4 Third Step: Pair nubia watch with your phone 1. Please use your phone to scan the QR code displayed on your device and pair your device to your phone via bluetooth according to the prompt. 2. Set it up as a newly-paired watch. Fourth Step: Fill in your personal Info Choose to wear the device on your left or right wrist based on your wearing habits; synchronize your personal data in order to calculate the sports information. Perform operations notification management, etc. as per your requirements. Note Please fill in your personal information truthfully so that nubia watch can calculate sports data based on your information. Fifth Step: Synchronize data Click the icon nubia watchs motion data. on the nubia smart wear app to get 5 Sixth Step: Learn basic operations Buttons Power button Press & hold: turn on or turn off your device. Short press: The watch dial plate enters the main list. Descriptions of icons in the Control Center Icons Descriptions Icons Descriptions Power Saving GPS Do Not Disturb Lift up wrist to light up screen Bluetooth Adjust screen brightness Mute mode Vibration mode Watch Dial Swipe up to call out notification center. Swipe down to call out contorl center. Swipe left/right the watch dial plate to enter the application center and main menu. 6 Screen Control You can control your nubia watch through a series of operations on the screen. Tap: tap on an item on the screen to select it or open whatever you tap. Swipe: slide your fingers on the screen horizontally or vertically to scroll left/right or scoll up/down the page. Return: Slide from left to right on the screen to return to the previous application interface. 7 Seventh Step: Learn commonly used functions Note When using Nubia watch for data communication, or w hen making calls, sending or receiving text messages, etc., Nubia watch needs to maintain a Bluetooth conne ction with the watch. Nubia watch needs to be connected to wifi to access t he Internet. Call You can use either of the following two methods to make a call after tapping Call on the main menu:

Method one: tap on the numeric buttons to enter a telephone number and tap the button to dial. Method two: tap Contacts to open the list of contacts, select the contact you want to call and tap the phone number to dial. On the incoming call interface, swipe down to hang up the call and swipe up to answer the call. Messages When you receive a new text message, you can view the information in the notification center. 8 When creating or replying to a text message, please operate on the mobile terminal. Sports & Health Real-time heart rate monitoring You can use your nubia watch to measure your real-

time heart rate once wearing it appropriately. When measuring your heart rate, please fit your wrist to the heart rate sensing area on your nubia watch and keep wearing it comfortably and suitably. Wearing too tightly or loosely will affect the measurement. Sports mode After you choose one from different sports modes as per your requirements, your nubia watch will automatically detect your sports data. Double click on the button Double-click to end to exit the sports mode. You can select your favorite music while doing your workout. 9 Disposal of your old wearable phone When the wheelie bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. All electrical and electronic products should be disposed of separately from normal household waste via designated collection points provided by government or local authorities. The correct disposal of electrical and electronic products will help protect the environment and human health. 10 Declaration of RoHS 2.0 Compliance Were determined to reduce the impact we have on the environment and take responsibility for the earth we live on. So this document allows us to formally declare that the SW1003, manufactured by Nubia Technology Co., Ltd, fully complies with the European Parliaments RoHS (Restriction of Hazardous Substances) 2.0 Directive 2012/95/EU, with respect to all the following substances:

(1) Lead (Pb)

(2) Mercury (Hg)

(3) Cadmium (Cd)

(4) Hexavalent Chromium (Cr (VI))

(5) Polybrominated biphenyl (PBB)

(6) Polybrominated diphenyl ether (PBDE)

(7) Di(2-ethylhexyl) phthalate(DEHP)

(8) Dibutyl phthalate (DBP)

(9) Benzyl butyl phthalate (BBP)

(10) Diisobutyl phthalate(DIBP) Our compliance is witnessed by written declaration from our suppliers. This confirms that any potential trace contamination levels of the substances listed above are below the maximum level set by EU 2011/65/EU, or are exempt due to their application. The SW1003 manufactured by Nubia Technology Co., Ltd meets all the requirements of EU 2011/65/EU. 11 EU certified frequency band Frequency band Max. output power (dBm) 802.11b/g/n(20/40MHz)

(2412MHz-2472MHz) 151 BLE(2402MHz-2480MHz)

-11 EDR(2402MHz-2480MHz) 81 Hardware and software The certified hardware version of your wearable phone is SW1003MB The certified software version of your wearable phone is SW1003_ENCommon_V1.00. EU Declaration of Conformity (DoC) Hereby, Nubia Technology Co., Ltd declares that this device is in conformity with the Radio Equipment Directive: 2014 / 53 / EU. For the declaration of conformity, visit http://www.nubia.com/en/support.php?a=download. Safety warning Adapter shall be installed near the equipment and shall be easily accessible. The wearable phone's normal operating temperature is 0C

~ 40C. In order to ensure the normal wearable phone functions, do not use this wearable phone outside the temperature range. 12 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Health and safety The device meets international guidelines for exposure to radio waves. Your device is a radio transmitter and receiver. Its designed not to exceed the limits for exposure to radio waves recommended by international guidelines. The guidelines were developed by the International Commission on Non-

lonizing Radiation Protection (ICNIRP), an independent technical standards body, and include margins designed to assure the safety of all persons, regardless of age and health. These guidelines use a unit of measurement known as Specific Absorption Rate (SAR). The SAR limit for the wearable phone is 4.0 W/kg and the highest SAR value for this device when tested for use at the limb was 0.10 W/kg. The SAR limit for the wearable phone is 2.0 W/kg and the highest SAR value for this device when tested for use at the body was 0.10 W/kg 1. In SAR measurement, the separation distance between the wearable device and test device is 5mm. As SAR is measured when the device is on its highest transmitting power, the actual SAR of this device while operating normally is typically below the levels shown above. This is because the device automatically changes its power level to ensure it only uses the minimum level required to 13 reach the network. The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. Important safety information For your own health and safety, please follow the radio frequency (RF) radiation exposure guidelines and keep your wearable phone no less than 5 mm away from your body. Failure to do this could mean that your RF exposure exceeds the guideline limits. How to limit your radio frequency (RF) exposure The World Health Organization (WHO) gives the following advice to people who want to limit their exposure to RF radiation Present scientific information does not indicate the need for any special precautions for the use of wearable phones. If individuals are concerned, they may choose to limit their own or their childrens RF exposure by limiting the length of calls, or using hands-free devices to keep wearable phones away from the head and body. Further information on the subject can be obtained from the World Health Organization website at http://www.who.int/peh-emf WHO Fact sheet 193: June 2000. 1. The tests are carried out in accordance with IEC standard IEC 62209-2. 14 FCC Regulatory Compliance FCC Regulations:

This wearable phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for receiver. help. Caution:

Changes or modifications not expressly approved by Nubia Technology Co., Ltd for compliance could void the users authority to operate the equipment. 15 RF exposure information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. This device is complied with SAR for general population

/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AHJO-

SW1003. The highest reported SAR value for usage near the body-worn is less than 1.6 W/Kg(1g-10mm). This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undersired operation. 16 Legal notice Copyright Statement Copyright 2019 by Nubia Technology Co., Ltd. All the copyrights of this document herein belong to Nubia Technology Co., Ltd Without the written permission of copyright owner, no part of this publication may be excerpted, reproduced, translated by any person or entity in any form or by any means. This document is subject to change without prior notice. Nubia Technology Co., Ltd keeps the right to make the final explanation to this document. Trademarks All other trademarks remain the property of their respective owners. Software statement Please use Online Update or update by downloading the official software matching with nubia . Please don't install any third-party or non-official operating system to avoid security risks. Nubia Technology Co., Ltd. will not be liable for any security threats arising from the upgrade of an operating system. To view the information of the regulatory marks, select About >

Certification. 17

Model: SW1003 FCCID: 2ZAHJO-SW1003 Nubia Technology Co., Ltd. i Charging Microptione intofiace Heart Rate Sensor

Nubia Technology Co., Ltd. Ad-HocCountry Code Cover Letter We, <Nubia Technology Co., Ltd.>, declare that this EUT (FCC ID: 2AHJO-SW1003) doesnt have Ad Hoc Mode function on US/Canada frequencies. In addition, the frequency selection feature is disable by firmware for device marketed to the US/Canada. For DTS part of this device, only channel 1~11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention.

Nubia Technology Co., Ltd. Date:2020/08/28 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AHJO-SW1003 To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Nubia Technology Co., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of to the Applicant and provide unjustified benefits to its competitors. these matters might be harmful We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Nubia Technology Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 Description Block Diagram Operational Description Schematics BOM tune-up information External Photos Internal Photos Test-Setup Photos User Manual The Applicant understands that pursuant this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory to Rule 0.457, disclosure of Contact name:Gong Bolin Tel:13510017647 Email:<gong.bolin1@zte.com.cn>

Company name :Nubia Technology Co., Ltd.

Nubia Technology Co., Ltd Date: 2020/8/28 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Nubia Technology Co., Ltd the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Nubia Technology Co., Ltd solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AHJO-SW1003 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Nubia Technology Co., Ltd in connection with the Application shall have the same effect as acts of the Nubia Technology Co., Ltd also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name:Gong Bolin Tel:13510017647 Email:<gong.bolin1@zte.com.cn>

Company name :Nubia Technology Co., Ltd