FCC ID: 2AWUK-KBA-200IF Body Fat Analyzer

Portable Body Composition Scanner The portable body composition scanner uses the Bio-electronics Impedance Analysis (BIA), which measures and analyzes bioelectrical resistance values. You can check the analyzed body composition through the Kuvings Health Friend Smart Juicer app linked with the body composition scanner. Periodically measure body composition and get information to manage body composition through the app. This product used by connecting to the Bluetooth of a mobile device( Smartphone iPhone 5S iOS 9.0 or later / Adroid OS 4.3.3 or later). Package contents

< Device> <User Manual> <battery>

Device Description

< Front > <Bottom> < Micro USB Connector >

How to Use APP You can download the Kuvings Healthfriend Smart Juicer app from Google Play or Apple App Store.

* Smartphone iPhone 5S_iOS 9.0 or later version / Android_OS 4.3.3. or later version 1. Before Using Body Composition Scanner 1) Please download Kuvings Healthfriend Smart Juicer app from the App Store or Google Play. 2) Once installed, run the app, create your user profile. 3) Press the power button on the side of device and check for LED illumination. And sync the product and your smart phone. 4) Connect the app with your phone. 2. How to measure body composition 1) Make sure your phone and the app are connected. 2) Extend your arms to hold four electrodes correctly with your thumb and index fingers. 3) Please dont move or speak while measuring. Keep your arms straight and do not talk or move during the measurement. 4) Push the Measure button from the Menu. 5) Once the measurement is complete, check the result from the App. Tips for accurate Measurement 1. Please stand up for about five to ten minutes, and then sit for the measurement. 2. In order to avoid errors caused by food, measure while fasting before a meal or two hours after a meal. 3. Please dont move or speak while measuring. 4. As water metabolism in body works by hour, make sure to measure at the same time of day at room temperature (20~25). 5. In order to avoid errors caused by water content in body, please measure after at least two hours since waking up. 6. Please measure after discharging feces and urine. 7. Do not measure after a sweaty workout, dynamic activity, or sauna. Notes on use 1. Consult with an expert first if you consider a diet/exercise program for the purpose of weight loss. 2. Do not use the measuring instrument near a device that generates and uses strong electromagnetic waves such as microwave oven. It may occur a measurement error. 3. Please be careful of any foreign substance on the electrodes of the measuring instrument. If there is any foreign substance on the device, remove it with a soft cloth, or with a minimum amount of water, cleaner and spray if required, before using. 4. Please do not take measurement while pregnant or suspected to be pregnant or during menstruation. 5. This product may affect pacemaker, ECG-related medical appliances, artificial heart, heart-lung machine and other medical devices. Thus, do not use this product if you are using one of those devices. 6. Do not use the instrument for the elderly or the physically and mentally weak. 7. Do not use the measurement instrument for purposes other than the specified. How to Manage the Instrument Please make sure the electrodes of the instrument are not stained with foreign substance.

(If there is any foreign substance on the device, remove it with a dry cloth before using.) SPECIFICATIONS Product : Portable Body Composition Scanner Model : KBA-200 Size : 126X47X39 mm Power Voltage : CR1620 Coin Cell Battery(DC+3.0V) Transmission : Bluetooth 4.0(2,402MHz ~ 2,480MHz) Weight : 61 g Product Pakage : Divice, Lithium Battery Manufacturer : NUC Electronics Co., Ltd. Origin : Made in Korea

(1) This Device may not cause harmful interface, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :

Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.

"ATTENTION: L'exposition aux rayonnements frquence radiolectrique. Antenne doit tre monte de telle manire minimiser le risque de contact humain pendant l'utilisation normale. L'antenne ne doit pas tre contact pendant le fonctionnement pour viter la possibilit de dpasser la limite de l'exposition aux frquences radio de la FCC. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation in subject to The following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) lappareil ne doit pas produire de brouillage;

2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC ID: 2AWUK-KBA-200IF IC: 26374-KBA200IF

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED LABEL The shall be permanently affixed in the rear side of the equipment

NUC Electronics Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: August 24, 2020 Subject; Request for Confidentiality FCC ID: 2AWUK-KBA-200IF To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Wonchang, Kwak Title: Manager

Letter of Authorization

: NUC Electronics Co., Ltd

: 280 Nowon-ro, Bukgu, Daegu-City, 41548, Rep. of Korea Company Address Product Name : Body Fat Analyzer Model Number : KBA-200 FCC Identifier : 2AWUK-KBA-200IF We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Wonchang, Kwak Date: August 24, 2020 Title: Manager Signature of applicant: