Vehicle Security and Remote Start Systems Vehicle Security and Remote Start System Owners Manual 4280760 Rev P1 03/17 4280760 Phase 2 VSS_RMST Owners Guide.indd 1 4280760 Phase 2 VSS_RMST Owners Guide.indd 1 3/22/2017 4:52:27 PM 3/22/2017 4:52:27 PM Contents Welcome ............................................................................................3 Remote Control Operation (optional vehicle security system) ....4 Your Original-Equipment RKE Keyfob ................................................4 Arming the Security System ................................................................4 Disarming the Security System ...........................................................4 System Operation (optional vehicle security system) ..................5 When the Security System is Armed ...................................................5 Security LED Indicator (optional) ........................................................5 Shock Sensor (optional) .......................................................................5 Starter Interrupt (optional) ....................................................................5 Shock Sensor Disable...........................................................................6 Intrusion Attempt Alert .........................................................................6 Disarming the System if Your RKE Keyfob is Lost or Inoperative ..6 Using the Remote Start Feature (optional) ....................................7 Starting / Stopping Your Vehicle (1-Way Transmitter) .......................7 Starting / Stopping Your Vehicle (2-Way Transmitter) .......................8 Starting / Stopping Your Vehicle (Factory RKE Transmitter) ............9 Entering the Vehicle While it is Running via Remote Start .............10 Pre-Heating or Pre-Cooling the Interior of the Vehicle ....................10 Car Find / Panic Mode (If Equipped) ..................................................10 Safety Features ...............................................................................10 Remote Start Safety Features ............................................................10 Power Window / Moon Roof Disable .................................................10 Automatic Door Locking .....................................................................10 System Maintenance ......................................................................11 Changing the Remote Control Transmitter Battery ......................... 11 Adding Remote Control Transmitters to Your System .................... 11 Deleting Lost or Stolen Remote Control Transmitters from Your System ......................................................................................... 11 User Selectable Options ................................................................12 Optional Activation Method (1-Way & 2-Way Transmitters) ............12 Additional User Notes ....................................................................12 Extending Run Time ............................................................................12 Why Your Vehicle May Not Start Via Remote ....................................12 Warranty Information .....................................................................13 2 4280760 Phase 2 VSS_RMST Owners Guide.indd 2 4280760 Phase 2 VSS_RMST Owners Guide.indd 2 3/22/2017 4:52:30 PM 3/22/2017 4:52:30 PM Welcome Congratulations on your purchase of a Ford Motor Company vehicle security and/or remote start system. This technology represents the latest in automotive convenience and protection systems. Your system, purchased today, is ready to accept tomorrows advancements in technology. The Ford Motor Company vehicle security and remote start system is a scalable product that can be con gured based on personal preference and vehicle model. All features contained in this manual may not have been installed at time of purchase. Please consult your Ford dealer to determine which features have been con gured on your vehicle and how to expand the functionality of your chosen system. 4280760 Phase 2 VSS_RMST Owners Guide.indd 3 4280760 Phase 2 VSS_RMST Owners Guide.indd 3 3/22/2017 4:52:30 PM 3/22/2017 4:52:30 PM 3 Remote Control Operation (optional vehicle security system) Your Original-Equipment RKE Keyfob:
Your factory supplied Remote Keyless Entry (RKE) keyfob controls the arming and disarming functions of your vehicle security system. The system is armed when the doors are locked with the RKE keyfob. The system is disarmed when the doors are unlocked with the RKE keyfob. Arming the Security System:
The Vehicle Security System may be armed using any of the methods below. 1. By pressing the
(Lock Button) on the factory RKE keyfob. 2. Pressing the lock area on the door handle (intelligent access equipped vehicles only). 3. By entering the Lock code into the keypad located on the outside of the drivers door (if equipped). The front and rear lights will ash and the security LED (optional) will illuminate for 10 - 20 seconds, after which the security system will arm. The security LED will begin to blink and all closed entry points will be protected. If an entry point is left open, the security system will continue to ignore that entry point until it is closed. Disarming the Security System:
The Vehicle Security System will be disarmed if any of the following actions are taken. 1. Pressing the 2. Touching the inside of the exterior door handle (intelligent access equipped
(Unlock Button) on the factory RKE keyfob. vehicles only). 3. Entering the Unlock code into the keypad located on the outside of the drivers door (if equipped). 4. Turning the ignition On (must have a valid key read if equipped). If there were no vehicle intrusion attempts while the security system was armed, the security LED (optional) will turn off when the security system is disarmed. If any vehicle intrusion attempts were made while the security system was armed, the vehicles horn will honk and the exterior lights will ash two (2) times and the security LED (optional) will ash a fast on/off sequence indicating an intrusion attempt. 4 4280760 Phase 2 VSS_RMST Owners Guide.indd 4 4280760 Phase 2 VSS_RMST Owners Guide.indd 4 3/22/2017 4:52:30 PM 3/22/2017 4:52:30 PM System Operation (optional vehicle security system) When the Security System is Armed:
All interior entry points are monitored for unauthorized entry (Note: depending on trim level, the vehicles hood may not be monitored);
The shock sensor (optional) monitors for impact to the vehicles body or glass;
The security LED indicator (optional) ashes once every few seconds. If any monitored entry point is opened or hard impact is detected, the system will activate an alarm cycle. During the alarm cycle:
The alarm cycle (horn honks) lasts for 30 seconds (the front and rear lights may continue to ash longer). At the end of the alarm cycle, the system will pause for 10 seconds and then begin monitoring for any further alarm conditions. If another alarm condition is detected the system will go in to another alarm cycle. The horn sounds an on / off pattern;
The front and rear lights ash;
The security LED indicator (optional) begins to ash rapidly. Security LED Indicator (optional):
The optional security LED indicator is a high-intensity red light mounted in a visible location on the vehicle dashboard. This red light gives a visual indication of the alarm systems state of operation. Note the chart below:
If the Security LED is Off Flashing slowly Flashing quickly On (not ashing) then the Security System is Disarmed Fully Armed Triggered in your absence In Standby Shock Sensor (optional):
While the security system is armed, the optional shock sensor monitors for impact to both the vehicles body and glass. If a light, not-threatening, impact is detected the system will honk the horn and ash the exterior lights one (1) time to warn-away would be intruders. In the event that a hard impact is detected, the system will trip an alarm cycle. Increasing or decreasing sensitivity should be completed by a service professional. If adjustment is necessary, please contact your local dealer. Starter Interrupt (optional):
Starter Interrupt is an optional feature that can be installed on certain model vehicles. If equipped, the starter is disabled any time the system is armed and starting of the vehicle with an invalid ignition key is attempted. 5 4280760 Phase 2 VSS_RMST Owners Guide.indd 5 4280760 Phase 2 VSS_RMST Owners Guide.indd 5 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM System Operation, cont (optional vehicle security system) Shock Sensor Disable:
The security system has the ability to ignore the optional shock sensor while armed. This feature is useful for events that may jar your vehicle, but pose no threat, such as a loud thunder storm or heavy construction traf c passing near your parked vehicle. This feature may be activated using the procedure listed below. The vehicles doors can be opened or closed during this process. To Disable the Shock Sensor:
1. Turn the ignition key off and remove key. 2. Within 15 seconds, open the drivers door. 3. Within 15 seconds, press the 4. Within 5 seconds press the
(Unlock Button) on your RKE Keyfob 3 times.
(Lock Button) on your RKE Keyfob 1 time. The horn will honk two (2) times and the security LED (optional) will illuminate for 20 seconds, after which the security system will arm with the shock sensor disabled. The shock sensor will remain disabled until the vehicle ignition is cycled ON then OFF. Intrusion Attempt Alert:
If the horn honks two (2) times when you disarm your security system, this indicates that the alarm was tripped while you were away from your vehicle. You will also notice that the dash mounted security LED indicator (optional) is also ashing rapidly. Turning the ignition to the ON position or rearming the security system will clear the intrusion attempt alert. Disarming the System if Your RKE Keyfob is Lost or Inoperative:
If your RKE keyfob fails to operate, the system can be disarmed using a valid ignition key or intelligent access keyfob (if equipped):
1. Enter the vehicle (the alarm may sound when the door is opened). 2. Insert the ignition key and turn to the ON position. For intelligent access equipped vehicles, press the start button. 3. The system will disarm when the ignition is powered and the vehicle recognizes the valid transponder key. 6 4280760 Phase 2 VSS_RMST Owners Guide.indd 6 4280760 Phase 2 VSS_RMST Owners Guide.indd 6 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM Using the Remote Start Feature (optional) 1-Way Transmitter 2-Way Transmitter Press two times to activate Remote Start. Press and hold** to manually shut down the Remote Start. Press to initiate Car Find. Press and hold** to initiate Panic Starting Your Vehicle with the 1-Way Transmitter:
The remote control start function is activated by pressing the button two times*
within 3 seconds on the 1-way remote control transmitter. The system will check the vehicle to ensure that it is safe to start, and if all safety parameters are correct, the engine will start within 5 seconds (diesel engines may take longer, to allow the glowplugs suf cient time in all conditions to heat up). Note: See the vehicle owners manual for further details on remote start operation. Stopping Your Vehicle with the 1-Way Transmitter:
Press and hold** the button to turn off the vehicle.
* May be activated by a Press & Hold, refer to User Selectable Options in this manual.
** Press & Hold or Pressing and Holding refers to pushing the transmitter button for more than 2.5 seconds. 7 4280760 Phase 2 VSS_RMST Owners Guide.indd 7 4280760 Phase 2 VSS_RMST Owners Guide.indd 7 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM Using the Remote Start Feature, cont (optional) Starting Your Vehicle with the 2-Way:
The remote control start function is activated by pressing the button two times within 3 seconds on either the 2-way remote control transmitter. If you are within the operating range of the system, your transmitter will respond with one single beep and one ash of the blue LED behind the button. This response indicates that the signal to start was received by the system. Once the vehicle starts (1-3 seconds later), your 2-way transmitter will respond with 2 beeps and 2 ashes of the blue LED. While remote started, the blue LED will continue to ash every few seconds indicating the vehicle is still running via remote start. Note: See the vehicles owner manual for further remote start run time details. Stopping Your Vehicle:
Press and hold** the button to turn off the vehicle. When the remote start is shut down by any means (run time has expired, by remote control, gear shifter actuated, hood opened), and you are within the operating range of the system, your 2-way transmitter will respond with 3 beeps and 3 ashes of the blue LED, indicating the remote start system has turned off. If you are out of the system operating range at the time of remote start shutdown, your 2-way transmitter may keep ashing the blue LED up to 15 minutes after the remote start was initiated or until vehicle is started by ignition key. Transmitter Indicators 1 Beep/LED Flash 2 Beeps/LED Flashes Steady LED Flash 3 Beeps/LED Flashes Remote Start Status Vehicle has received an Initiate Start Command. Vehicle has started. Vehicle is running. Vehicle has shut down, either by pressing and holding** the button or completing the run cycle (Transmitter must be in range of the vehicle). Safety input triggered:
- Hood opened or gear selector moved while running in remote start mode. or
- Key turned in the ignition on a remote started vehicle. or or Transmitter is out of range of the vehicle while trying to remote start or the vehicle did not receive the command to remote start.
* May be activated by a Press & Hold, refer to User Selectable Options in this manual.
** Press & Hold or Pressing and Holding refers to pushing the transmitter button for more than 2.5 seconds. 8 4280760 Phase 2 VSS_RMST Owners Guide.indd 8 4280760 Phase 2 VSS_RMST Owners Guide.indd 8 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM Using the Remote Start Feature, cont (optional) Using the ROG Start Feature (optional) Remote Keyless Entry Transmitter Press then press then press . to activate Remote Start Press then press then press . to shutdown Remote Start Transmitter image for reference only. Actual transmitter design may vary. Starting Your Vehicle with the factory Remote Keyless Entry (RKE) Transmitter (ROG Start):
The remote control start function is activated by pressing the button then within 2 seconds, pressing the button, then within 2 seconds pressing the button on the vehicle remote keyless entry transmitter. The vehicle will ensure that it is safe to start, and if all safety parameters are correct, the engine will start within 5 seconds
(diesel engines may take longer, to allow the glowplugs suf cient time in all conditions to heat up). Note: See the vehicle owners manual for further details on remote start operation. Stopping Your Vehicle with the Factory Remote Keyless Entry (RKE) Transmitter:
Pressing the button then within 2 seconds, pressing the button, then within 2 seconds pressing the button on the vehicle remote keyless entry transmitter will cause the vehicle to shut down within 10 seconds. 4280760 Phase 2 VSS_RMST Owners Guide.indd 9 4280760 Phase 2 VSS_RMST Owners Guide.indd 9 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM 9 Using the Remote Start Feature, cont (optional) Entering the Vehicle While it is Running via Remote Start:
1. Enter the vehicle with the Integrated Keyhead transmitter. 2. Insert the key into the ignition and turn to the ON position. 3. Once a programmed vehicle key has been recognized, the remote start session will stop, the 2-way transmitter (if equipped) will beep 3 times, and the vehicle will operate normally. Pre-Heating or Pre-Cooling the Interior of the Vehicle:
Most vehicles will automatically heat/cool the vehicle without presetting the HVAC controls (See the vehicle owners manual for further details). Car Find / Panic Mode (2-Button Transmitter Only):
Press the button to activate the Car Find feature. The horn will honk and parking lights will ash 6 times to assist you in nding your vehicle. Press and hold** the button to activate the Panic feature (only available on certain model vehicles). The horn will sound and the parking lights will ash for 30 seconds or until you press or press and hold** the button again. The hood is opened Gear selector is moved***
Safety Features Remote Start Prevention and Shut down:
For safety and security reasons, the system will prevent remote start activation or shut down the engine during remote start operation if any of the following occur:
As a safety precaution, the vehicle will shut off if left unattended for 15 minutes. Default remote start runtime can be changed: Refer to Message Center in the Instrument Cluster chapter of your vehicles owner manual for further details. Power Window / Moonroof Disable (if factory equipped):
On certain model vehicles, each time the remote control start feature is activated, all power windows and the moonroof will be disabled while the vehicle is running via remote start. The windows and moonroof will resume normal operation after the remote start is shut down, or the vehicle is being used with the vehicle key. Automatic Door Locking:
Each time the remote control start feature is activated, the power door locks may be activated prior to the vehicle starting. The doors can be unlocked at any time via the vehicle key fob.
** Press & Hold or Pressing and Holding refers to pushing the transmitter button for more than 2.5 seconds.
*** On some vehicles. 10 4280760 Phase 2 VSS_RMST Owners Guide.indd 10 4280760 Phase 2 VSS_RMST Owners Guide.indd 10 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM Remote Start System Maintenance Changing the Remote Control Transmitter Battery:
The (CR-2032 for 1-way transmitter and CR2450for 2-way transmitter) 3-volt lithium battery supplied in your remote control should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in remote transmitter operational range (the distance from your vehicle). Follow the instructions below to change the remote transmitter battery. 1. Remove the small phillips screw (2-way transmitter only). 2. Gently pry apart the top and bottom halves of the transmitter case using a small 3. Remove the old battery and replace with a new one. Be sure to observe the (+) at tool. sign on the battery and case. 4. Carefully snap the case halves back together. Reinstall phillips screw (2-way transmitter only), then test the remote control. It is not necessary to re-program the remote control after changing the battery, however the rst activation after changing the battery may require several button presses to allow the transmitter to re-sync to the system.. Adding Remote Control Transmitters to Your System:
The system has the ability to operate from up to 8 remote controls. Follow these instructions to add a remote control to your system. 1. Open the drivers door and enter the vehicle (shifter in park), leaving the drivers door open throughout the remainder of the process. 2. Press and hold the brake pedal. 3. Turn the vehicle ignition key from the OFF position to the ON position 6 times, ending in the ON position (Off, On, Off, On, Off, On, Off, On, Off, On, Off, On). Note, the brake pedal can be released after the rst Off to On cycle. The horn will honk 3 times. This indicates that the unit has entered the remote control programming mode. 4. Press & Hold** the button on the remote control to be programmed. The horn will honk 1 time, indicating that the system has learned that remote control. 5. Repeat step 4 for any additional remote controls. 6. Turn the vehicle ignition off to exit the programming mode. Test all remote controls to ensure that they work properly. Deleting Lost or Stolen Remote Control Transmitters from Your System:
Lost or stolen remote control transmitters can be easily deleted by reprogramming all eight transmitter code locations. Follow the steps above and program any combination of transmitters a total of eight times.
** Press & Hold or Pressing and Holding refers to pushing the transmitter button for more than 2.5 seconds. 11 4280760 Phase 2 VSS_RMST Owners Guide.indd 11 4280760 Phase 2 VSS_RMST Owners Guide.indd 11 3/22/2017 4:52:31 PM 3/22/2017 4:52:31 PM User Selectable Remote Start Options Optional Activation Method (1-Way & 2-Way Transmitters):
The Remote Start System comes pre-programmed to start the vehicle when the button on the remote control transmitter is pressed 2 times. The Remote Start System may be programmed to activate by pressing and holding** the button on the remote control transmitter for more than 2.5 seconds by following these instructions. 1. Open the drivers door and enter the vehicle, close drivers door. 2. Ensure vehicle is in Park and the brake pedal is not depressed. 3. Turn the vehicle ignition to the ON position. 4. Press the button on the remote control transmitter 3 times within 5 seconds
(Pausing for 1 second between each button press). The horn will honk 1 time and the 2-way transmitter (if equipped) will beep 1 time, indicating that the remote start system will now start with a Press and hold. 5. Turn the vehicle ignition to the OFF position to exit the programming mode. 6. Repeat steps 1 - 5 to return the vehicle to the factory setting. Additional User Notes 1 Honk = Press and Hold to start 2 Honks = Double Press to start Extending Run Time:
The run time of the Remote Start System can be doubled while the vehicle is running via remote start (adding another 5/10/15 minutes, depending on the vehicle settings) by pressing the button on the remote control transmitter 2 times. Why Your Vehicle May Not Start Via Remote:
The no-start condition may not be related to the remote start function. Verify that the vehicle starts with the ignition key or via push-button start (if equipped). The vehicle has already been started via the remote 2 times or a total of 30 minutes (On some models). For enviromental purposes, the vehicle can only be remote started twice in 1 hour. This restriction will be reset by waiting 1 hour, or by turning the vehicle ignition to ON. The hood is ajar. The battery in the remote start transmitter needs replacing. The remote start feature has been disabled in the instrument cluster menu. Low vehicle battery. An instrument cluster maintenance indicator light is illuminated.
** Press & Hold or Pressing and Holding refers to pushing the transmitter button for more than 2.5 seconds. 12 4280760 Phase 2 VSS_RMST Owners Guide.indd 12 4280760 Phase 2 VSS_RMST Owners Guide.indd 12 3/22/2017 4:52:32 PM 3/22/2017 4:52:32 PM FORD VEHICLE REMOTE START SYSTEMS LIMITED WARRANTY BASIC COVERAGE Ford Motor Company will repair or replace any properly installed Ford Vehicle Security/Remote Start/Keyless Entry System found defective in factory-supplied material or workmanship during the warranty period, as well as any component damage by the defective accessory. The accessory will be warranted for whichever provides the greater bene t:
12 months or 12,000 miles (20,000 km) from your system purchase date/mileage (whichever occurs rst) the remainder of your new vehicle limited warranty This means that a Ford Vehicle Remote Start System purchased along with your new vehicle are covered for up to the length of the Ford or Lincoln new vehicle limited warranty. CUSTOMER REQUIREMENTS To receive warranty service, Purchaser must ful ll the following requirements:
1) Return the vehicle to the original selling dealers place of business during regular business hours for warranty service. 2) Present the Dealer with the Purchasers copy of the original invoice showing date of purchase and installation if applicable. If the Purchaser is traveling or has moved to a different location, any authorized Ford Motor Company dealer will ful ll this warranty. EXCLUSIONS THIS WARRANTY DOES NOT COVER PARTS THAT ARE DAMAGED BY MISUSE, NEGLECT, ALTERATION, ABUSE, ACCIDENT, FIRE, FLOOD, LIGHTNING, IT DOES NOT COVER PARTS THAT HAVE BEEN IMPROPERLY SERVICED OR USED IN APPLICATIONS FOR WHICH THEY WERE NOT DESIGNED OR APPROVED BY FORD MOTOR COMPANY; IT DOES NOT COVER FAILURES CAUSED BY NON-FORD PARTS. This warranty gives you speci c legal rights and you may also have other rights that may vary from state to state or province to province. Ford Motor Company does not authorize any person to create for it any other obligation or liability in connection with the Ford Vehicle Security/Keyless Entry Systems. TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. NEITHER FORD MOTOR COMPANY NOR THE SELLING DEALER SHALL BE RESPONSIBLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, OR CONSEQUENTIAL DAMAGES. Some states or provinces do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you. FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation. Note: Changes or modi cations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment and void warranty. To comply with RF exposure limits for general population/uncontrolled exposure, the antenna(e) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. This radio transmitter has been approved by Industry Canada to operate with the antenna listed below. Antenna types not included below or having a gain greater than that indicated below are strictly prohibited for use with this device. Approved External Antenna: Omni-directional, 2.5 dBi gain, 902-928 MHz, antenna impedance is 50 ohms. Notice:
Do not remote start vehicle in an enclosed environment (i.e. closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of Carbon Monoxide. Carbon Monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and/or death. 13 4280760 Phase 2 VSS_RMST Owners Guide.indd 13 4280760 Phase 2 VSS_RMST Owners Guide.indd 13 3/22/2017 4:52:32 PM 3/22/2017 4:52:32 PM