FCC ID: 2AXRGOCPICSDSCM ATM protection

PNM: OCP_I0494 Label stuck on the PCB:

Label stuck on the final product:

ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518 PNM: OCP_I0308 Label stuck on the PCB:

Label stuck on the final product:

ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518 PNM: OCP_I0281 Label stuck on the PCB:

Label stuck on the final product:

ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

PNM: OCP_I0308 On main board - HVIN: OCPICSDSCM Stick on the bottom face of the electronic board On Host - HMN: OCP_ICSD-CDU10 Stick on the upper face of the cassette housing ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

PNM: OCP_I0308 Label stuck on the PCB:

Label stuck on the final product:

ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Attn: TIMCO Engineering Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 Authority to Act as Agent On our behalf, I appoint M. Olivier HEYER from Emitech Montpellier 145 rue du Massacan 34741 VENDARGUES CEDEX FRANCE, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by TIMCO Engineering Inc., still resides with OBERTHUR CASH PROTECTION, 3bis rue docteur QUIGNARD, 21000 DIJON FRANCE. This authorization is valid until further written notice from OBERTHUR CASH PROTECTION, for FCC ID 2AXRGOCPICSDSCM. The March 23rd 2021 By EZERZER Hugo, Embedded firmware manager ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059

Federal Communications Commission Authorization and Evaluation Division Dijon France, March 16th 2021 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AXRGOCPICSDSCM File Name OCPICSDSCM ICSD BlkDia.pdf OCPICSDSCM OCP_I0308 Schem.pdf Applicant: EZERZER Hugo Product: OCP_I0308 Model: OCPICSDSCM To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description OCPICSDSCM ICSD CDU10 Opdes.pdf NDA Parts List User Manual Internal Photo The above materials contain information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. According to User Manual confidentiality, our aim is to get a long term one, in order to protect our knowhow:

Since our business is to secure ATM safe part and especially banknotes, it is really important that installation and user manual of such devices do not fall under a public access. OCPICSDSCM Opdes1.pdf OCPICSDSCM OCP_I0308 PartsLst.pdf OCPICSDSCM OCP_ICSD-CDU10 UserMan.pdf OCPICSDSCM ICSD CDU10 IntPho.pdf trade secrets and proprietary By the way, it could be helpful for thieves to have in their hands any information about which secure elements are provided to secure ATMs. This document provides technical details on how the ATM are secured against criminal activities. Having such information made public would obviously weaken the protection we are offering our clients. Moreover, such a document is not shared with any of our contacts unless a proper and signed NDA agreement has been signed before between both parties. An example of NDA form is available on OCPICSDSCM Opdes1.pdf file. ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518 We also require keeping internal photo file as confidential to permit to keep electronic parts and designs as secure as possible. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, March 16th 2021 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Dijon, March 16th 2021 Subject: RADIO Certification of OCP_ICSD-CDU10 Applicant: EZERZER Hugo Product (PMN): OCP_I0308 Model (HVIN): OCPICSDSCM FCC ID: 2AXRGOCPICSDSCM IC ID: 26545-OCPICSDSCM To Whom It May Concern:

We would like to submit the above product for Certification concerning FCC and Canadian rules. Please review all required documents enclosed. Please note that this request is made under Class II Permissive Change in a Limited Modular Approval context. This application is dedicated to ATM protection range of products: based on ink staining solutions, it permits to reduce to zero the benefits of any kind of ATM attacks. As an extension of OCP_G0289 radio design, this reference (OCP_I0308) uses the same characteristics (schematic and routing basis). It is integrated in different products (OCP_ICSD-S2, and now OCP_ICSD-CDU10), and they are dedicated to communicate with OCP_SCM one. Compliance for RF exposure requirement was demonstrated in those test reports. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, March 16th 2021 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Dijon, January 15th 2021 X (*) No Yes Subject: Acknowledgment of FCC Modular approval requirements FCC ID: 2AXRGOCPICSDSCM To Whom It May Concern:

This application is dedicated to ATM protection range of products: based on ink staining solutions, it permits to reduce to zero the benefits of any kind of ATM attacks. Modular Approval Requirement

(i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements.

(ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation.

(iii) The modular transmitter must have its own power supply regulation.

(iv) The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler

(at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section.

(v) The modular transmitter must be tested in a stand-alone configuration

(vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number.

(vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization.

(viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X X X X X X X ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

(*) Even if there is no shielding on the radio part, the whole product (radio part in its host) complies with the requirements of the standard. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, January 15th 2021 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Dijon, March 16th 2021 Subject: RADIO Certification of OCP_ICSD-CDU10 Applicant: EZERZER Hugo Product (PMN): OCP_I0308 Model (HVIN): OCPICSDSCM FCC ID: 2AXRGOCPICSDSCM IC ID: 26545-OCPICSDSCM To Whom It May Concern:

We would like to submit the above product for Certification concerning FCC and Canadian rules. Please review all required documents enclosed. This application is dedicated to ATM protection range of products: based on ink staining solutions, it permits to reduce to zero the benefits of any kind of ATM attacks. According to the requested Class II Permissive Change with Limited Modular Approval, let us make a summary of similarities and differences between those boards/devices:

OCP_ICSD-

CDU10 ATM cassette survey PNM HMN OCP_G0289 OCP_I0308 OCP_I0308 OCP_SCM OCP_ICSD-S2 Application ATM Safe survey ATM cassette survey Radio comm. With OCP_ICSD Devices*

With OCP_SCM device*

With OCP_SCM device*

BOM for radio feature Same to OCP_ICSD one Same to OCP_G0289 Same to OCP_G0289 Complete BOM

Radio components implantation Similar with OCP_ICSD devices***

Similar with other OCP_ICSD devices**

Similar with other OCP_ICSD devices***

Similar with other OCP_ICSD devices**

Similar with other OCP_ICSD devices***

ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

(*): OCP_SCM device is able to communicate with OCP_ICSD devices (S1, S2 and ActiveDispense for now). Indeed, radio characteristics are the same for all boards since they are composed of the same electronic components and the same firmware configuration. A proprietary bidirectional protocol is implemented to permit a full duplex channel between those devices (OCP_SCM and OCP_ICSD)

(**): OCP_ICSD devices (S1, S2 and ActiveDispense for now) are dedicated to have the same behaviour, the same functionalities; in this way, they are composed of the same BOM, except some features which have no impact on radio communication like one LED output, a dedicated connector or a buzzer. Note that firmware is the same for all ICSD.

(***): Radio balun and driver (with its quartz) components keep the same position and the same layout in order to have as much as possible the same behaviour. The radio antenna is also similar in all boards but can be oriented in different angle due to mechanical considerations. Compliance for RF exposure requirement was demonstrated in those test reports. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, March 16th 2021 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Dijon, January 15th 2021 Subject: RADIO Certification of OCP_ICSD-S1, OCP_ICSD-S2, and OCP_ICSD-

ActiveDispense Applicant: EZERZER Hugo Product (PMN): OCP_I0494, OCP_I0308, OCP_I0281 Model (HVIN): OCPICSDSCM FCC ID: 2AXRGOCPICSDSCM IC ID: 26545-OCPICSDSCM To Whom It May Concern:

We would like to submit the above product for Certification concerning FCC and Canadian rules. Please review all required documents enclosed. This application is dedicated to ATM protection range of products: based on ink staining solutions, it permits to reduce to zero the benefits of any kind of ATM attacks. According to the requested Class II Permissive Change with Limited Modular Approval, let us make a summary of similarities and differences between those boards/devices:

PNM HMN OCP_G0289 OCP_I0494 OCP_I0308 OCP_I0281 OCP_SCM OCP_ICSD-S1 OCP_ICSD-S2 OCP_ICSD-

ActiveDispense Application ATM Safe survey ATM cassette survey ATM cassette survey ATM cassette survey Radio comm. With OCP_ICSD Devices*

With OCP_SCM device*

With OCP_SCM device*

With OCP_SCM device*

BOM for radio feature Same to OCP_ICSD one Same to OCP_G0289 Same to OCP_G0289 Same to OCP_G0289 Complete BOM

Similar with other OCP_ICSD devices**

Similar with other OCP_ICSD devices**

Similar with other OCP_ICSD devices**

Radio components implantation Similar with OCP_ICSD devices***

Similar with other OCP_ICSD devices***

Similar with other OCP_ICSD devices***

Similar with other OCP_ICSD devices***

ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

(*): OCP_SCM device is able to communicate with OCP_ICSD devices (S1, S2 and ActiveDispense for now). Indeed, radio characteristics are the same for all boards since they are composed of the same electronic components and the same firmware configuration. A proprietary bidirectional protocol is implemented to permit a full duplex channel between those devices (OCP_SCM and OCP_ICSD)

(**): OCP_ICSD devices (S1, S2 and ActiveDispense for now) are dedicated to have the same behaviour, the same functionalities; in this way, they are composed of the same BOM, except some features which have no impact on radio communication like one LED output, a dedicated connector or a buzzer. Note that firmware is the same for all ICSD.

(***): Radio balun and driver (with its quartz) components keep the same position and the same layout in order to have as much as possible the same behaviour. The radio antenna is also similar in all boards but can be oriented in different angle due to mechanical considerations. Compliance for RF exposure requirement was demonstrated in those test reports. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, January 15th 2021 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Federal Communications Commission Authorization and Evaluation Division Dijon France, December 28th 2020 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AXRGOCPICSDSCM Applicant: EZERZER Hugo Product: OCP_I0494, OCP_I0308, OCP_I0281 Model: OCPICSDSCM To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics File Name OCPICSDSCM BlkDia.pdf OCPICSDSCM Schem OCP_I0494.pdf OCPICSDSCM Schem OCP_I0308.pdf OCPICSDSCM Schem OCP_I0281.pdf Operational Description OCPICSDSCM Opdes.pdf NDA Parts List OCPICSDSCM Opdes1.pdf OCPICSDSCM PartsLst OCP_I0494.pdf OCPICSDSCM PartsLst OCP_I0308.pdf OCPICSDSCM PartsLst OCP_I0281.pdf OCPICSDSCM UserMan OCP_ICSD-S1.pdf OCPICSDSCM UserMan OCP_ICSD-S2.pdf OCPICSDSCM UserMan OCP_ICSD-ActiveDispense.pdf OCPICSDSCM IntPho.pdf trade secrets and proprietary Internal Photo The above materials contain information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. According to User Manual confidentiality, our aim is to get a long term one, in order to protect our knowhow:

Since our business is to secure ATM safe part and especially banknotes, it is really important that installation and user manual of such devices do not fall under a public access. By the way, it could be helpful for thieves to have in their hands any information about which secure elements are provided to secure ATMs. User Manual ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518 This document provides technical details on how the ATM are secured against criminal activities. Having such information made public would obviously weaken the protection we are offering our clients. Moreover, such a document is not shared with any of our contacts unless a proper and signed NDA agreement has been signed before between both parties. An example of NDA form is available on OCPICSDSCM Opdes1.pdf file. We also require keeping internal photo file as confidential to permit to keep electronic parts and designs as secure as possible. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, December 28th 2020 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518

Attn: TIMCO Engineering Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 Authority to Act as Agent On our behalf, I appoint M. Olivier HEYER from Emitech Montpellier 145 rue du Massacan 34741 VENDARGUES CEDEX FRANCE, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by TIMCO Engineering Inc., still resides with OBERTHUR CASH PROTECTION, 3bis rue docteur QUIGNARD, 21000 DIJON FRANCE. This authorization is valid until further written notice from OBERTHUR CASH PROTECTION. The December 1st 2020 By EZERZER Hugo, Embedded firmware manager ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059

Federal Communications Commission Authorization and Evaluation Division Dijon France, December 1st 2020 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AXRGOCPICSDSCM Applicant: EZERZER Hugo Product: OCP_G0289 Model: OCPICSDSCM To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description NDA Parts List User Manual Internal Photo The above materials contain information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. According to User Manual confidentiality, our aim is to get a long term one, in order to protect our knowhow:

Since our business is to secure ATM safe part and especially banknotes, it is really important that installation and user manual of such devices do not fall under a public access. File Name OCPICSDSCM BlkDia.pdf OCPICSDSCM Schem.pdf OCPICSDSCM Opdes.pdf OCPICSDSCM Opdes1.pdf OCPICSDSCM PartsLst.pdf OCPICSDSCM UserMan.pdf OCPICSDSCM IntPho.pdf trade secrets and proprietary By the way, it could be helpful for thieves to have in their hands any information about which secure elements are provided to secure ATMs. This document provides technical details on how the ATM are secured against criminal activities. Having such information made public would obviously weaken the protection we are offering our clients. Moreover, such a document is not shared with any of our contacts unless a proper and signed NDA agreement has been signed before between both parties. An example of NDA form is available on OCPICSDSCM Opdes1.pdf file. ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518 We also require keeping internal photo file as confidential to permit to keep electronic parts and designs as secure as possible. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. If you have any queries, please do not hesitate to contact us. Regards, EZERZER Hugo, December 1st 2020 ETABLISSEMENT PRINCIPAL (PLACE OF BUSINESS) :

3 BIS RUE DU DOCTEUR QUIGNARD BP 67907 21079 DIJON CEDEX Tl. : + 33 (0)3 80 60 43 00 Fax : + 33 (0)3 80 70 08 92 www.oberthurcp.com Sige social (Headquarters) :

7, avenue de Messine 75008 PARIS France Tl. : + 33 (0)1 42 99 77 00 Fax : + 33 (0)1 42 99 77 98 S.A. au capital de 2.445.000 - RCS PARIS B 332 059 518 SIRET 332 059 518 00057 APE 2630Z TVA FR 12 332 059 518