Order Number
: GETEC-C1-20-647 Test Report Number
: GETEC-E3-20-087 FCC Part 15 subpart C Page 1 / 1 APPENDIX H
: USERS MANUAL EUT Type: RF Remote Control Unit FCC ID.: OZ5TC011MA C011 User Information
(Model Name : C011)
[KOREA]
Table of Contents 1. Overview and Specification of C011
(1) Overview
(2) Specification 2. Precautions 3. Customer Support 1. Overview and Specification of C011
(1) Overview This remote control uses wireless communication in the 2.4GHz band, It is a product that can be controlled with the MAKITA Module receiver and key button.
(2) Specifications Model No. Output power Receive sensitivity Range of frequency 2402~2480 MHz Channel 40 Channel C011 3 dBm 92 dBm Size Width 58mm X Thickness 15.9 mm X Length 131.5 mm
(tolerance 0.8 mm) Weight 63.2g (tolerance 5g, battery not applied) Power source AAA x 2EA, (2 alkaline batteries are used) Operational
-20 ~ + 50 Temperature range Importer 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-
8502 Japan 2. Precaution manual. user manual.
(1) After replacement of the battery, use the remote control following pairing in accordance with user
(2) If the unit does not operate after replacement of battery, reattempt pairing in accordance with the
(3) If the remote controller is not being used for prolonged period of time, it is recommended you remove the battery from the unit.
(4) Do not dismantle or exert heat to the battery.
(5) Do not drop battery or exert extreme impact that may even cause the case to be damaged.
(6) Do not immerse the battery in water.
(7) There is danger of explosion if a the battery is inserted reversely.
(8) Properly dispose of used batteries. 3. Customer Support Refer to the contact number for services provided in the MAKITA Manual.
[KC certification mark and number]
Certification number : R-C-OHS-C011
[TELEC certification mark and number]
Certification number :XXXXXX
[FCC ID certification mark and number]
Certification number :OZ5TC011MA
[IC certification mark and number]
Certification number :21703-C011
[CE certification mark]
safety cannot be provided. Business name : Ohsung Electronics Co., Ltd Manufacturing date : 2020.12 Since the wireless device has the potential for radio wave interference, services related to personal Manufacturer/Country of Manufacture : Ohsung Electronics Co., Ltd / Korea Equipment/Model name : Specific low power wireless device (wireless device for wireless data communication system / C011 FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference 2.This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communication Commissions (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Canadian (IC) Two-part Statement (English and French) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : 1) Lappareil ne doit pas produire de brouillage; 2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.