FCC ID: OZ5URCMX-350N RF REMOTE CONTROLLER

Order Number Test Report Number

: GETEC-C1-09-177

: GETEC-E3-09-101 FCC Part 15 subpart C Page 1 / 1 APPENDIX I

: USERS MANUAL EUT Type: RF Remote Controller FCC ID.: OZ5URCMX-350N Owners Manual Thank You!

Thank you for purchasing the MX-350 Pre-Programmed and Learning Remote Control. This manual is designed to assist you step-by-step as you setup the MX-350 to replace all of your remote controls and automate your home entertainment system. TM MX-350 Owners Manual 2004 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON-

TROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS-

SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. MX-350 is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 Table of Contents 2 Getting Started 3 Button Layout 5 Basic Setup 5 Pre-Programmed Method 9 Learning Method 12 Volume Control Punch Through 14 Advanced Operation 16 Advanced Setup 16 Editing Button Labels 19 Macro Button Setup 21 Favorite Channel Setup 23 Hiding and Adding Pages 25 Erasing 26 Cloning One MX-350 to Another 27 Recalling Pre-Programmed Settings 28 Utilizing Optional RF Base Stations 31 IR/RF Signal Setting 33 ID # - Setting Base Station Address 34 EMITT - Setting IR Emitter Outputs 35 BLAST - Setting the Front Panel Blaster On or Off 37 Pre-Programmed Code Tables 61 Frequently Asked Questions 62 Warranty Specifications 63 Federal Communication Commission Interference Statement 64 1 T h e M X - 3 5 0 Getting Started Congratulations!

Youve purchased one of the most advanced and easy to setup control sys-

tems available. The MX-350s built-in library includes thousands of different brands and models of remote controls. In most systems, all you have to do to setup the MX-350 is enter which brands and models you own. If you own a component too new to be in the library, the MX-350 uses advanced learn-

ing technology to quickly set each MX-350 button, one at at time. Setting up your MX-350 to replace all your existing remote controls can be done in a few minutes. Basic Setup is described on pages 5 to 13. The MX-350s exciting advanced features automate and customize operation in many ways. You could use Macro Setup to power on all of your compo-

nents and start the show with the press of one button! With the MX-350s unique Favorite Channel capability, you can tune in a channel with the press of one button instead of entering the entire channel number. Any of the button names on the display can be edited as you like. It is best to delay any Advanced Setup (described on pages 14 to 36) until after you finish Basic Setup. Battery Installation Remove the battery compartment cover by pressing up the cover lock. Insert four AAA batteries into the battery compartment as shown in the diagram.

-

+

-

+

+

-

+

-

2 Universal Remote Control, Inc. Button Layout TITLE FAVORITE CHANNEL Button PAGE Buttons change the page of Display Buttons. MAIN Button takes you to the MAIN Menu. Transmitting Busy Signal Indicator*

LIGHT Button Screen Labeled Display Buttons PAGE Numbers FUNCTION Buttons

*Note: When a command, macro or favorite channel is being transmitted, an icon will appear in the top right corner of the display. While the MX-350 is busy, it will ignore a button push. 3 T h e M X - 3 5 0 Selecting a New DEVICE Changes All Button Commands Instantly The MX-350 can operate ten different devices even though it is only one remote control. Lets try it now! Press the MAIN button, then press the TV DEVICE button. MAIN Button TV DEVICE Button The top of the screen changes from MAIN to TV. Now all of the buttons change their function to operate a TV. Press the page buttons. Watch the labels of the display buttons change with each press. There are eight pages of display buttons already labeled for TV operation. To operate another component (e.g., VCR, DVD etc.), press the MAIN button to return to the MAIN menu. The MAIN menu displays five of your Devices on the screen. Simply press one of the screen-labeled Device buttons to operate another device. If you dont see the device name you want, then use the PAGE buttons to display the remaining five devices on page 2 of the MAIN menu. Light Button Press the LIGHT button to backlight all the buttons. To turn off the back-

lighting, press the LIGHT button again, or just wait ten seconds (the back-

lighting automatically shuts itself off). LIGHT Button 4 Universal Remote Control, Inc. Basic Setup You can start setting up your MX-350 using either the Pre-Programmed Method or the Learning Method. However, all the buttons of the MX-350 are setup at once with the Pre-Programmed Method, so it is usually faster than the one-button-at-a-time Learning Method. Pre-Programmed Method 1 Power on the A/V component you wish to setup, so that you can test codes by sending power off commands. 2 3 Refer to the pre-programmed code tables on pages 38 - 59 and write down the code numbers listed for your A/V component. The code numbers are listed by categories of devices, then by brand. See page 37 for a category list. Press and hold both the MAIN and ENT (Enter) buttons for approxi-

mately three seconds. The top of the display will show SETUP. You are in SETUP mode now. Note: You have 30 seconds to perform a step while you are in SETUP mode. If you dont press a button within that time, the MX-350 will time out and return to normal operation. MAIN Button ENT Button 5 T h e M X - 3 5 0 4 Press the P-PRO button to select the Pre-Programmed Method. P-PRO Button The display changes so that you can select which Device button to setup. First Five Device Names Press a Page button to display the other five Device names. 5 In this step you choose the name of the device youd like to setup. Use the cursor UP or DOWN buttons to change the flashing name. When it is correct, press the SELECT button. UP DOWN SELECT For Example: I wanted to setup the TV Device button first, so I pressed the cursor UP or DOWN until TV was flashing in the display. The bottom of the display will flash FROM TABLE. 6 Universal Remote Control, Inc. 6 In this step you verify the type of component you plan to operate with this device button. If the flashing name is correct, press SELECT. SELECT If the name flashing in the display is incorrect (for example, you are setting up AUX to operate a Laser Disc Player), use the UP and DOWN buttons to change the flashing name to the correct type of component. Note: Each name that appears in the display may include several types of components. For example, the DVD category includes DVD players and Laser Disc Players. See page 37 for a list of component types each Code Table contains. 7 Point the MX-350 at the component, then enter the first three digit code number from your notes using the numbered buttons. After you enter each three digit number, look at the component to see if it turned off. Use the number buttons to enter the code number. Continue to enter code numbers until the component powers off. For Example: I have a Sony TV. I found the code numbers 070, 139,147, 126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered buttons on the MX-350, I entered 070 and looked at the TV. It didnt turn off, so I entered 139, then 147 and so on, until I found the code that powered off the TV. 7 T h e M X - 3 5 0 Note: If a component fails to turn off after you have entered all of the code numbers listed for your brand, you can scan through the other brands in the table using the UP and DOWN buttons (there is a chance that your component was actually manufactured by another brand). However, most of the code tables are so large it is usually faster to use the Learning Method on Page 9. Scan Up to the next Code Number Scan Down to the previous Code Number Press Power On or Power Off to test if the device powers off. 8 When the component turns off, save the code number you entered by pressing the SAVE button that appears on the screen. Code Number You Entered SAVE Button 9 Exit SETUP mode by pressing the MAIN button two times. When the display shows MAIN, you are back in normal operating mode. MAIN Button 8 Universal Remote Control, Inc. 10 Repeat steps one through nine for each of your devices. If you are missing any commands, use the learning method, described next Learning Method The MX-350 can learn commands from your old remote controls one-but-

ton-at-a-time by following these simple steps:

1 Line-up the MX-350 with your old remote control, head-to-head, one or two inches apart. 2 On the MX-350, press and hold the MAIN and ENT (Enter) buttons at the same time for approximately three seconds. The top of the dis-

play will show SETUP. You are in SETUP mode now. Note: You have 30 seconds to perform a step while you are in SETUP mode. If you dont press a button within that time, the MX-350 will time out and return to normal operation. 3 Press the LEARN button. LEARN Button The top of the screen will change to LEARN. 9 T h e M X - 3 5 0 The display will show a list of the first five devices. Select the device you would like to teach commands to by pressing the Device button. Press any of the Device Buttons. Now, press any button you want to teach a command to. 4 5 6 Press any Button. Note: If you dont see the display button you would like to teach, use the PAGE buttons. The only buttons you cant teach are the PAGE and MAIN but-

tons. Once you press a button, the top of the display will change from LEARN to READY. 10 Universal Remote Control, Inc. 7 Press and hold the button you want on your old remote control until the display changes to either GOOD or FAILED. If the GOOD label appears on top of the display, you were successful. Now, press the next button you wish to teach. Keep repeating steps 6 through 7 until you have learned all the buttons you want. If the FAILED label appears on top of the display, try to teach the same button in MX-350 once again by repeating steps 6-7. Continue to teach any commands from any of your remote controls by repeating steps 5-7 (to go back to step five, press MAIN once). Once you completed teaching all the buttons, return to normal opera-

tion by pressing the MAIN button twice. Test all your new commands. If any of them dont work, try learning again using these notes:

8 9 Move to another room. Plasma TVs, sunlight, halogen or quartz lighting can interfere with the learning process. Although the old remote control seems to work fine, change the batteries to fresh alkaline batteries. Vary the distance between the remote controls gradually. Try 1/4, 1, 2and so on, up to 4 feet. Tap the button on the original remote control instead of pressing and holding it during the learning process. 11 T h e M X - 3 5 0 Volume Control Punch Through In most home entertainment systems, the sound volume is only con-

trolled by one device. In some systems, it is the TV speakers that make the sound, so you would use the TV device on the MX-350 to raise and lower the volume. In another system, it might be a surround sound receiver and speakers that control the sound, so you would use the MX-350s AUDIO device to adjust the volume. Constantly switching the MX-350 to TV or AUDIO to adjust the volume is inconvenient in daily life. You can use Punch Through to set the MX-350s volume buttons to always control the sound in your system. That way when the MX-350 is set to VCR or DVD, the volume up, down and mute buttons will work perfect-

ly without switching back to AUDIO or TV. Heres how:

1 2 3 Enter Setup mode by pressing and holding both MAIN and ENT for three seconds. The top of the display show you are in SETUP mode now. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. Press the PAGE UP button to get to page 2 of the SETUP menu. Press the PUNCH button. Press the VOL button. The display confirms by displaying VOL at the top of the screen. This sets up the group of three buttons (Volume Up, Volume Down and Mute) in one action!

Select Volume The bottom of the display flashes PUNCH TO. 12 Universal Remote Control, Inc. 4 Press the device button for the device that doesnt have volume control commands yet (i.e.,DVD). This is the device you are going to PUNCH TO for the volume and mute commands. Select the Device you want to Punch To Note: If you wish to PUNCH to the MAIN device, press the POWER OFF button at this time. 5 6 The bottom of the display will then flash PUNCH FROM. Now you select the device that has the volume commands you want

(i.e.,TV for systems using the TV speakers, AUDIO for systems with surround sound receivers). The bottom of the display will flash SAVED. Repeat steps 3-5 until all your devices operate the volume perfect-

ly. Press the MAIN button twice to return to normal operating mode and test your Punch Through settings. Note: The Punch Through feature is not limited to volume and can also be applied to channel or other functions. If you find yourself switching to a particular device frequently to use a group of con-

trols, consider using Punch Through for another group, as listed here:

VOL - Volume Up, Volume Down and Mute CH - Channel Up, Channel Down, Prev. Channel and Number buttons (0-9, +10, ENT) PLAY - Play, Stop, Pause, Rewind and Fast Forward VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel POWER - Power On and Power Off 13 T h e M X - 3 5 0 Advanced Operation Setting Backlight Options You can adjust the amount of time that the MX-350 backlight stays on by entering the SETUP mode and proceeding to page two (using the PAGE UP button), then pressing the LIGHT button on the display (not the Backlight button). Then enter the amount of time you would like the light to stay on using the number pad (0-99 seconds). After making your selection, press the SAVE button. If you dont want backlighting at all (this extends battery life), press the ON button that appears on the screen. The ON will change to OFF. Press the SAVE button. Exit the setup mode by pressing the MAIN button. The FAV Button When you press the FAV button, the display changes to a list of your favorite TV channels. Each button can be set to instantly select the channel on your TV. There are eight pages of five favorite channel buttons for a total of 40. Simply touch the PAGE buttons to display the other favorite chan-

nels. To return to the last device you viewed, press MAIN once (a second press will take you to the MAIN menu). FAV Button Favorite Channel Buttons To setup your Favorite Channel buttons go to page 21. 14 Universal Remote Control, Inc. Adjusting Contrast You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time. MAIN Button Cursor Up & Down Buttons Contrast set low. Contrast set high. Transmitting (Busy Signal) Icon When a command is being transmitted, an icon will appear in the top right corner of the display. It is a useful aid when setting up Macros and FAVs, since it flashes with every step of a sequence of commands. 15 T h e M X - 3 5 0 Advanced Setup After youve finished all your basic setup, you can choose to make opera-

tion easier by customizing the MX-350 just the way you want, using the Advanced Setup features described in this section. Editing Button Labels You can change the name of any of the display buttons (including Favorite Channels) by following these steps:

1 Press and hold both the MAIN and ENT (Enter) buttons for approx-

imately three seconds. The top of the display will show SETUP. You are in SETUP mode now. Note: You have 30 seconds to perform a step while you are in SETUP mode. If you dont press a button within that time, the MX-350 will time out and return to normal operation. 2 Press the EDIT button. EDIT Button 3 4 The display changes to the EDIT menu. Press the TEXT button. TEXT Button The screen displays the list of devices and EDIT will appear at the top of the screen. Navigate to the device and page where there is a button label you want to EDIT, selecting between the FAV, MAIN, DEVICE, then using the PAGE button. 16 5 6 Universal Remote Control, Inc. Press the button you wish to edit. The first character of your button label blinks. Blinking Character EDIT flashes at the bottom of the screen. Change the character by using any of the number keys. Each press of the same number button selects the next character of that numbers group, as shown here. Once the character you want appears, move to the next space by pressing the RIGHT cursor button. A,B,C,1 D,E,F,2 G,H,I,3 J,K,L,4 S,T,U,7 M,N,O,5 P,Q,R,6 V,W,X,8 Y,Z,9 UP Cursor button deletes ALL text. LEFT Cursor button moves blinking character left. RIGHT Cursor button moves blinking character right. DOWN Cursor button deletes the currently blinking character. 17 T h e M X - 3 5 0 7 8 9 When you are finished editing the button, press the button you edited and SAVED will flash at the bottom of the display. To change any other button labels on the same device, press the next button, then repeat steps 6-8. If you wish to edit a button on another device, press the MAIN button once, then repeat Steps 4-8. Once youve finished editing buttons, press the MAIN button four times to return to normal operation. Edit the MAIN Menu Title or a MAIN Menu Device Label You can change the title of the MAIN Menu or a MAIN Menu device label by following these steps after youve entered TEXT Edit mode

(described in the steps one through four in the preceding pages). 1 2 3 4 Once youve entered TEXT Edit mode, the top of the screen displays EDIT and the first five devices of the MAIN Menu. There are five pages you can access via the Page UP or DOWN buttons. When the top of the screen says EDIT, pressing a device button jumps to the pages for that device so that you can edit a devices LCD buttons normally. However, if you continue to tap the Page button, the top of the screen will change from EDIT to MAIN. While it says MAIN, there are three pages of LCD but-

tons. The first two list the Devices of the MAIN Menu and enable you to change the device names when pressed. The third page titled MAIN has only one entry for the LCD buttons; MAIN. When you press the corresponding hard button, you can relable the MAIN title itself. Select the title to edit by pressing the adjacent hard button. Edit the text (described on steps 5 and 6 on page 17). Press the button you edited to save the changes. Heres an example:

The MAIN Menu title has been changed to PATIO, so whenever the MAIN button is pressed, the user is reminded that this is the Patio remote. 18 Each of the MAIN menu device but-

tons has been cus-

tom labeled for the activities the user likes to use out on the Patio. Universal Remote Control, Inc. Macro Button Setup Imagine turning on your TV, your DVD player and your surround sound receiver by pressing a single button on your MX-350! What would nor-

mally take three remotes and three button pushes, the MX-350 can accomplish with the press of one button. We call that a Macro. Any of the Display buttons, the Power On or the Power Off buttons (on any Device or Page) can be set to be Macro buttons!

To setup a macro button, follow these easy steps:

1 Enter the SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 3 Press the MACRO button. The top of the display will show MACRO. The bottom of the display will flash SELECT. Navigate to the Device and Page where there is a button you would like to set as a Macro button using the MAIN, DEVICE, and PAGE but-

tons. Advanced Options:

If you wish to set one of the DEVICE buttons as a macro, on step 3, press the Page Up button twice. The top of the display changes to MAIN, and you can navigate to MAIN page 1 or page 2 before going on to Step 4. Another option for DEVICE button macros is to only send the macro if the but-

ton is pressed and held. This is setup by entering a delay as the first step of the macro. The amount of delay determines how long the user must press the but-

ton before the macro is sent. The advantage of this option is that a normal press of the DEVICE button will simply switch devices without issuing the macro. 4 Press the button you want to set as a Macro button. The top of the screen will display the label of the button you selected. At the bot-

tom of the screen it displays STEP0, indicating that no macro steps have been entered yet. 19 T h e M X - 3 5 0 5 Navigate to the Device and Page that has a button you want in your macro using the MAIN, DEVICE and PAGE buttons. Then press the button with the command you want. Whenever a button is pressed, another Macro step is counted and displayed at the bottom of the screen. Dont worry about the number of steps. Each macro button can store up to 190 steps, so you are not likely to run out of steps!

Note: You can program delays in between commands by pressing the PAUSE button. Each press adds half a second to the delay. 6 Press the LIGHT button to end your macro. A new screen displays three choices:

SAVE Button SAVE UNDO If you are happy with your macro, press the SAVE button. The UNDO button lets you erase the last step. EXIT The EXIT button erases all the macro steps. 7 Press the MAIN button twice to return to normal operation. 20 Universal Remote Control, Inc. Favorite Channel Setup Imagine surfing all your favorite channels, without ever typing in a channel number. By simply setting up each of the favorite channel but-

tons, you can make TV, cable or satellite operation fun and easy. To setup a Favorite Channel button, follow these steps:

1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 Press the FAV display button. FAV Button 3 4 5 6 The top of the display will show FAV. The bottom of the display will flash SELECT. Use the Page buttons until you can see the name (i.e., ABC, CBS, NBC) of the favorite channel you wish to setup. Press the favorite channel button you wish to setup. The top of the screen changes to show the channel name. The bottom of the screen displays STEP0, indicating that you have not entered the channel number yet. Press either the TV, SAT or CABLE Device button (select the device you use to enter channel numbers). Press each of the number buttons for the channel. Note: Some brands of television require an ENT(Enter) command after the channel numbers. 21 T h e M X - 3 5 0 Note: If a number is repeated when setting the channel (for example,channel 33 or 522) it is usually best to set a half second delay in between the identical numbers by pressing the PAUSE button. Each press of the PAUSE button increases the delay by a half second. Use the PAUSE Button to set delays between steps, each press of the pause button increases the delay by a half second. 7 Press the LIGHT button after you enter the channel number. A new screen appears:

SAVE Button To save the channel you entered, press the SAVE button. The UNDO button lets you erase the last entry. The EXIT button erases all entries for this button. 8 When you are finished setting up Favorite Channel buttons, press the MAIN button twice to return to normal operation. 22 Universal Remote Control, Inc. Hiding and Adding Pages Each of your MX-350 Devices contains up to eight pages (if a page has no IR data, it will be HIDDEN). However, you can HIDE any page from the users view. A hidden page still appears in SETUP modes, so can be used in macros. If you change your mind and would like the user to see a hidden page, you can ADD them. You can add or hide pages on devices, or on your favorite channel pages using this simple process:

Note: Be sure to program your Macros before you hide pages with a poten-

tial macro step in them. You cant access hidden pages during macro setup. However, after you finish Macro setup, you can hide pages without affect-

ing operation of your macros. 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 Press the EDIT button. EDIT Button PAGE Button 3 Press the PAGE button. PAGE appears at the top of the screen. 23 T h e M X - 3 5 0 4 Navigate to any page, using the MAIN, DEVICE, FAV, and PAGE but-

tons. FAV Button PAGE Buttons DEVICE Buttons MAIN Button 5 When you select a page, the top of the screen indicates whether you want to ADD? or HIDE? the page dis-

played. When you would like to change a pages visibility, press the LIGHT button. This page is hidden. To ADD it, press the LIGHT button. This page is visible. To HIDE it, press the LIGHT button. 6 7 You can continue to ADD or HIDE pages on other devices by repeat-

ing Steps 4 and 5. When you are finished adding and hiding pages, press the MAIN but-

ton four times to return to normal operation. 24 Universal Remote Control, Inc. Erasing You can erase an individual button with a learned command, a macro or a favorite channel. You can erase an entire Devices learned com-

mand or macro buttons. You can also erase ALL your learned com-

mands on all devices or all your macros or favorite channels every-

where. If you really want a fresh start, it is possible to reset everything to the factory default condition. Erasing Learned Buttons, Macros or Favs 1 2 3 4 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note : You have 30 seconds for each step, otherwise the MX-350 will time out automatically. Press a PAGE button to display page two of Setup. Press the ERASE button. Press either the LEARN, MACRO or FAV button. The following screen appears:

ALL If you press ALL, the MX-350 displays a SURE? button. After the SURE button is pressed, all the buttons will be erased. DEVICE If you press DEVICE, a list of Devices will appear. Press the device button that you wish to erase. The bottom of the screen will flash ERASE twice, then ERASED. KEY If you press KEY, youll have to navigate to the Device and Page you want using the MAIN, DEVICE and PAGE buttons. Press a button to erase it. The bottom of the display will flash ERASE twice, then ERASED. To return to normal operating mode, press the MAIN button four times. 25 T h e M X - 3 5 0 Erasing the Entire MX-350 To erase EVERYTHING, press and hold both the MAIN and the STOP buttons for 15 seconds. After 15 seconds, the RESET screen appears. Press the SURE button to erase all of your settings and return to the fac-

tory default setup. SURE Button Cloning One MX-350 to Another If you own two or more MX-350, you can copy and transfer all the setup from one MX-350 to another. Just follow these easy steps:

1 2 3 4 5 6 7 8 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. Press a PAGE button to display page two of Setup. Press the CLONE button. Align the two MX-350 head-to-head, about an inch apart. Press the RECV display button on the new MX-350 you would like to setup by cloning. Press the SEND display button on the MX-350 you previously setup. Press the START button on the new MX-350 and then press the START button on the MX-350 you previously setup. Note: Cloning typically takes about 90 seconds. After completion, the cloned MX-350 will flash GOOD. Return to normal operation by pressing the MAIN button twice. 26 Universal Remote Control, Inc. Recalling Pre-Programmed Settings If you didnt write down the code numbers you setup your MX-350 with, you can recall them via this simple process:

1 2 3 4 5 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. Go to page two of the SETUP menu via the PAGE UP button. Press the RECAL button. The display changes to the recall screens. The screen automatically switches between four screens, alternately flash-

ing page one devices and code numbers then those for page two. Note: Pay attention to the page numbers on the bottom of the screen. Page 1 code numbers are the ones setup for the Page1 Devices. Page 2 code numbers are the ones setup for the Page 2 Devices. Write down the code numbers as they appear. Return to normal operation by pressing the MAIN button twice. 27 T h e M X - 3 5 0 Utilizing Optional RF Base Stations You can use the MX-350 as you would your other remote controls. It trans-

mits very powerful line-of-sight output using infrared light commands

(invisible to the naked eye). When you point the MX-350 at the components, expect the range to be between 30 and 50 feet. When the remote is not pointed in the general direction of the components, the range will vary

(depending on reflective surfaces, lighting, etc.). However, the MX-350 also sends radio signals in every direction. By pur-

chasing the MRF-100 or the addressable MRF-250 or MRF-350 base sta-

tions, you can operate your equipment with the MX-350 50 to 100 feet away

(through walls, doors, cabinets, inside or outside). Since the RF Base Station picks up the MX-350's radio signals from any direction, regardless of distance, the MX-350 doesnt have to be pointed!

Using MRF-250 or MRF-350 Addressable Base Stations By installing an MRF-250 or MRF-350 base station you gain freedom from interference from a nearby room, house or condo where someone else might be using an RF remote control. Addressable base stations are assigned one of 15 unique ID#s. This allows multiple equipment loca-

tions in one house to be controlled by any MX-350. In operation its simple:

when you select a device located in the Den, the MX-350 only talks to the base station in the Den. When you select a device located in the Family Room, the MX-350 only talks to it!

When used with an MRF-250 or MRF-350 base station, the MX-350 can be programmed to control identical components, for example, a media room array of TVs . The intelligent routing of the MRF-250 or the MRF-350 base station will send your commands only to the TV you want to control. The other identical TVs will not receive commands. Of course, if your system utilizes identical satellite receivers, cable boxes, VCRs or disc changers you can utilize IR routing just as easily for them. If you have more than six identical components, up to 15 addressable MRF-250s or MRF-350s can be installed to control them (thus allowing up to 90 identical components in one house). Note: The MX-350's radio signals will not control components directly. Components that came with "no pointing" radio remote controls cannot be operated by the MX-350 unless the component can be switched to standard 28 Universal Remote Control, Inc. The MX-350 sends radio signal to the MRF-100, MRF-250 or the MRF-350 RF Base Stations. The RF Base Station converts radio signals to stan-

dard infrared commands and sends them out via a built-in front blaster to components in the same cabinet space. Self-adhesive flashers (included with the MRF-250 or the MRF-350) affix to the front panels of your components. The flashers relay infrared commands to components out-of-sight of the front blaster. The flashers plug into the rear flasher line out-

put jacks. Each flasher has a 10 cable to easily reach compo-

nents on nearby shelves. 29 T h e M X - 3 5 0 RF Settings Overview The MX-350 is factory set to work out of the box with an MRF-100 base sta-

tion, which is not addressable. The only setting that affects operation with an MRF-100 is the RF/IR setting (to operate, the MX-350 must be set to IR/RF or RF- it will not operate the MRF-100 in IR mode). The MX-350 will operate with an MRF-250 or MRF-350 base station set to ID#0 with the factory default settings. However, in order to gain the advantages of addressable base stations (no interference between systems within one house or a condo development with potential interference between two different con-

dos, turning the front blaster on or off, or routing identical commands to a stack of identical televisions or satellite receivers etc.) you must reset the MX-350 and the Base Station ID# to any address other than ID#0. ID#0 is an open door to any RF signal, it is not a true address. It is extremely useful for testing whether any interference is present, since the base stations STA-

TUS LED will flicker if interference is present. Once the base station is moved to a location where the LED does not flicker, the ID# can be changed to one of the other addresses. Note that ID#0 does not allow any emitter or blaster configuration. Before changing any emitter or blaster settings, you must reset the ID# to an address other than 0. Here are the factory default RF settings of the MX-350:

IR/RF (Type of Signal) - All devices are factory set to send both an IR line of sight signal and an omnidirectional RF signal. ID# (Base Station Address) - All devices are factory set with ID #0. EMITT (IR Emitter Line Output) - All devices are factory set to output IR com-

mands through ALL IR Emitter Line Outputs. BLAST (Base Station Front Panel Blaster) - The blaster is factory set to be on. Changing the RF Settings 1 Enter SETUP mode by pressing and holding both MAIN and ENT for three seconds. Note: You have 30 seconds for each step, otherwise the MX-350 will time out automatically. 2 Press the PAGE buttons until page three of Setup is displayed (RF is the only choice on Page 3). 30 Universal Remote Control, Inc. 3 Press the RF button. RF Button 4 The RF Settings Menu appears. See the notes on the following pages for more info on each option. Make your selection by press-

ing the button you want:

Signal (IR, RF or Both) Base Station ID #

Emitters - ALL or a specific Emitter Blaster - Turn the Blaster On or Off Exit this Menu 5 After youve made a new setting and SAVED your change, use the EXIT button to return to the RF settings menu to change any other setting. Once you are finished all settings, use the MAIN button to return to normal operation IR/RF Signal Setting You can set the signal to be IR line-of-sight only, RF only or IR and RF simultaneously. Additionally, you can set the signal the same way for ALL ten of your devices OR you can set the signal differently for each device

(the plasma TV could be set to be IR line-of-sight only, while the DVD player and the Satellite receiver are set to be RF only). A good reason to set the signal to RF only is to prevent too much IR being sent to a sensitive component from two arrivals at the front panel (one directly from the MX-350, one from the RF base station). A good reason to set the signal to IR only is that another room has an MRF-100 base station (no RF address) so it will receive commands from the MX-350 unless it is set to IR only. 31 T h e M X - 3 5 0 From the RF Settings Menu, select IR/RF. Decide whether you are changing the Signal for all devices or just one of the devices of the MX-350. 1 2 Select ALL to change the signal settings to ALL devices in the MX-350. Then, go to Step 4. Select DEVIC to change the signal settings to just one of the devices in the MX-350. Then, go to Step 3. 3 The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change IR/RF set-

tings, then go to Step 4. Page Buttons display the other page of devices. Select a device 4 Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu. Both IR and RF will be output Only IR line-of-sight Only RF will be output Save the new setting Exit this Menu without changing the IR/RF settings 32 Universal Remote Control, Inc. ID # - Setting Base Station Address When you are installing a system within 100 feet of another equipment location in the same home OR near a home, condo, yacht or motor home that might potentially have an RF remote control of any kind, it is recommended that you use an addressable base station and set the address as described here. You can operate up to 15 different equipment locations, each with an MRF-250 or MRF-350 assigned a unique Receiver ID#. You program each or all of your MX-350 devices to the appropriate equipment location by assigning the corresponding ID# in the RF Settings Menus. 1 2 From the RF Settings Menu, select ID#. Decide whether you are changing the ID# for all devices or just one of the devices of the MX-350. Select ALL to change the ID# for ALL devices in the MX-350. Then, go to Step 4. Select DEVIC to change the ID# for just one of the devices in the MX-350. Then, go to Step 3. 3 The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change the ID#, then go to Step 4. Page Buttons display the other page of devices. Select a device 33 T h e M X - 3 5 0 4 Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu. Displays the current ID#

Change the ID# to a higher number Change the ID# to a lower number Save the new setting Exit this Menu without changing the IR/RF settings EMITT - Setting IR Emitter Outputs The MRF-250 and MRF-350 Base Stations enable you to route or steer the IR commands from any Device to any or all of the IR Line Outputs. This allows you to control identical devices using the exact same IR commands (such as an array of television sets in a media room or a stack of identical satellite receivers installed in a central location with one satellite receiver dedicated to each room with a television). Each button push (or macro step) is rout-

ed to the specific IR Line Output youve assigned to a device. In the factory set default settings, the MX-350 is set to route IR com-

mands from any device to ALL IR Line Outputs simultaneously. To change the MX-350 default settings follow these steps:

1 2 From the RF Settings Menu, select EMITT. Decide whether you are changing the Emitter settings for all devices or just one of the devices of the MX-350. Select ALL to change the Emitter settings to ALL devices in the MX-350. Then, go to Step 4. Select DEVIC to change the Emitter settings to just one of the devices in the MX-350. Then, go to Step 3. 34 Universal Remote Control, Inc. 3 The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change the Emitter settings, then go to Step 4. Page Buttons display the other page of devices. Select a device 4 Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu. Displays the Line Output # or ALL Change the Line Output upwards Change the Line Output downwards Save the new setting Exit this Menu without changing the EMITT settings BLAST - Setting the Front Panel Blaster On or Off The MRF-250 and MRF-350 Base Stations have a configurable front panel high power IR LED or blaster for controlling compo-

nents in the same cabinet space without emitters attached to their front panel. The front panel blaster can overpower or saturate the sensors of some A/V components, so if intermittent operation occurs, the blaster should be turned off. The blaster is incompatible with a stack of identical components, since all components will receive IR commands at once, no mat-

ter what device is selected. Turn off the front panel blaster by fol-

lowing the steps described on the next page:

35 T h e M X - 3 5 0 From the RF Settings Menu, select BLAST. Decide whether you are changing the Blaster for all devices or just one of the devices of the MX-350. 1 2 Select ALL to change the blaster settings to ALL devices in the MX-350. Then, go to Step 4. Select DEVIC to change the blaster settings to just one of the devices in the MX-350. Then, go to Step 3. 3 The display changes to a list of the names of your devices. If you have two pages of devices, pressing either of the page buttons will display the other page. Select the device you would like to change IR/RF set-

tings, then go to Step 4. Page Buttons display the other page of devices. Select a device 4 Select the new setting by pressing the desired button, then press SAVE to save your new setting and return to the RF settings menu. Turn Blaster ON. Turn Blaster OFF. Save the new setting Exit this Menu without changing the BLAST settings 36 Universal Remote Control, Inc. Pre-Programmed Code Tables The MX-350s Pre-Programmed code library is divided into categories (TV, VCR, AUX, etc.). Each category actually includes many types of components. For example, the VCR category includes TV/VCR combo units. Within each category, the code numbers are listed in rows by brand

(Sony, Panasonic, B & K, etc.). Some brands have more than one three digit code for you to try. Just circle the correct row and refer to it while you setup (step-by-step instructions for using Pre-Programmed codes are found on page 5). TV TVs, Plasma/LCD TVs, Projectors and Monitors Pages 38-41 CABLE Cable TV Descramblers/Tuners and WEBTVs Pages 41-43 DVD DVD Players, TV/DVD Combos, TV/DVD/VCR Combos, DVD Recorders, and Laser Disc Players VCR VCRs and TV/VCR Combos Pages 43-47 Pages 47-49 AUDIO Amps, Preamps, A/V Receivers and XM Radios Pages 49-52 SAT Satellite Receiver CD CD Players and Changers DVR AUX Digital Video Recorders (TiVo, Replay) Media PCs, GAME Systems, iPod, TAPE Decks, Lighting Systems and Custom Installation Products Page 52-54 Pages 54-56 Page 56 Pages 56-60 37 TV - TVs, Plasmas, Projectors and Monitors BRAND CODE NUMBERS 072 081 161 160 247 388 474 475 404 405 458 473 197 146 248 112 143 073 167 157 183 052 043 054 056 080 112 131 197 004 112 058 006 310 573 574 477 452 453 454 503 076 103 273 388 401 441 423 443 088 266 201 197 002 003 004 058 043 197 002 003 004 043 101 103 143 043 568 004 043 050 051 143 043 054 043 143 197 101 004 143 043 004 016 043 044 076 077 103 114 125 127 143 369 004 143 319 320 321 329 ADMIRAL ADVENT AKAI AMARK AMPRO AMSTRAD ANAM AOC APEX DIGITAL AQUAVISION ASTAR AUDIOVOX AVENTURA AVION BENQ BLAUPUNKT BOXLIGHT CAIRN CANDLE CAPEHART CETRONIC CITIZEN CLASSIC COBY CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DELL DIBOSS DIGITAL PROJECTION 437 570 DREAMVISION DURABRAND DWIN DYNASTY DYNATECH DYNEX EIKI ELECTROGRAPH ELECTROHOME ELEMENT EMERSON EPSON ESA FISHER FUJITSU FUNAI FUTURETECH GATEWAY GE 235 312 313 314 343 344 345 401 177 257 043 062 399 454 187 470 466 024 076 143 196 526 514 401 197 004 005 028 043 047 048 050 051 076 077 096 143 151 153 154 155 324 579 590 323 007 057 556 410 299 346 396 198 223 219 246 028 043 052 401 043 242 268 197 008 009 034 056 073 074 130 144 155 160 161 165 004 091 157 183 38 TV (continued) - TVs, Plasmas, Projectors and Monitors CODE NUMBERS BRAND GEM GOLDSTAR GRUNDIG HAIER HALL MARK HANNSPREE HISENSE HITACHI HP HUMAX HYUNDAI ILO INFINITY INFOCUS INSIGNIA JBL JCPENNEY JENSEN JVC KEC KENWOOD KLEGG KLOSS KMC KNOLL SYSTEMS 409 230 KONKA KREISEN KTV LG LODGENET LOEWE LOGIK LUXMAN LXI MAGNAVOX MARANTZ MATSUI MAXENT MEMOREX METZ MGA MINERVA MINTEK MISAKAI MITSUBISHI MTC NAD NEC 391 004 102 106 112 113 116 119 127 143 220 083 502 501 004 381 419 442 554 411 460 380 004 009 010 011 012 023 075 143 158 163 166 072 221 250 586 587 589 421 316 327 378 379 481 518 337 338 472 164 230 330 331 332 333 252 409 449 470 531 532 547 548 564 350 354 399 400 401 402 403 454 457 164 197 004 008 009 024 030 065 101 143 156 160 013 471 533 534 034 038 070 083 145 199 210 240 241 244 245 406 420 581 043 197 070 466 002 059 143 457 530 197 043 143 154 522 523 243 284 283 363 364 365 366 569 576 577 072 222 223 224 164 322 422 072 004 166 007 015 052 081 160 164 549 467 197 003 004 022 059 060 061 063 064 127 160 164 094 226 264 390 535 536 537 538 539 540 558 559 560 561 562 563 197 164 184 397 281 584 164 242 007 072 004 088 197 004 024 028 042 088 362 401 519 540 550 004 024 028 040 042 109 124 146 191 225 237 267 300 348 450 197 004 062 101 015 025 565 566 428 448 132 130 134 197 040 016 024 056 019 236 237 262 272 281 575 527 043 367 351 567 432 376 394 504 043 NIKO NIKEI NORCENT NUVISION OLEVIA ONKING 39 TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND ONWA OPTOMA OPTONICA ORION PANASONIC PHILCO PHILIPS CODE NUMBERS 043 360 553 249 265 270 019 081 096 552 524 429 430 034 056 080 092 164 208 261 359 377 583 197 003 024 056 059 060 063 064 164 004 551 431 424 425 197 003 004 005 038 059 093 161 164 127 184 206 259 260 264 274 294 PHILIPS/MAGNAVOX 260 294 PIONEER 520 438 447 459 385 393 397 197 018 023 025 116 135 190 203 204 209 234 237 334 335 336 533 582 513 507 508 505 506 493 494 388 353 354 356 077 004 143 144 160 161 165 167 004 058 131 143 171 173 193 392 571 392 398 498 499 500 493 572 034 056 092 019 043 143 004 127 160 161 165 065 156 144 197 004 023 024 056 074 152 333 585 588 007 019 043 047 PLANAR POLAROID PORTLAND PROJECTION DESIGN 545 546 417 418 541 542 543 544 PROSCAN PROTON PROTRON PROVIEW PROX QUASAR RADIO SHACK RCA REALISTIC REVOLUTION HD 466 ROCTEC 186 395 414 415 416 476 168 169 178 179 180 181 182 183 073 157 340 341 342 RUNCO 197 058 004 202 SAMPO 516 517 427 434 461 462 463 464 004 050 089 101 105 127 143 160 211 228 SAMSUNG 229 253 254 258 309 578 399 509 510 511 512 166 007 020 053 057 082 187 266 276 004 028 043 048 143 497 015 030 004 007 028 057 143 094 160 082 165 166 189 200 205 496 555 214 251 306 307 308 326 468 170 081 019 028 029 014 004 022 143 175 349 088 072 313 205 200 521 412 444 445 446 491 070 085 139 147 126 185 194 207 213 277 278 279 004 028 003 043 528 112 499 500 004 043 572 401 002 328 514 401 469 197 003 059 060 063 064 164 044 160 127 052 052 401 376 394 432 504 081 SHERWOOD SIEMENS SIGNATURE SIM2 SONY SOUNDESIGN SOYO SPECTRICON SPECTRONIQ SSS STARGATE SUPERSCAN SUPRE MACY SVA SYLVANIA SYMPHONIC SYNTAX OLEVIA TANDY SANSUI SANYO SCEPTRE SCOTT SEARS SELECO SHARP 40 TV (continued) - TVs, Plasmas, Projectors and Monitors BRAND TATUNG TCL TECHNICS TECHVIEW TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA THOMPSON TMK TOSHIBA TOTEVISION TRUTECH UNIVERSAL VIDEO CONCEPTS 146 VIDIKRON VIDTECH VIEWSONIC VIORE VISCO VITO VIZIO WARDS WESTINGHOUSE WINBOOK YAMAHA YORK YUPITERU ZENITH ZONDA CODE NUMBERS 056 062 426 034 080 557 004 002 003 004 024 028 043 072 101 143 037 046 086 087 072 172 215 004 480 455 456 465 007 015 030 040 062 101 138 216 287 290 291 230 288 289 292 293 315 237 325 382 479 143 529 008 009 440 406 414 415 439 174 184 188 192 340 342 395 004 433 389 390 271 242 472 526 528 478 386 387 004 008 009 019 028 060 061 063 064 072 074 143 164 034 435 436 495 076 077 280 339 407 408 451 370 371 372 373 197 004 004 043 368 522 072 073 095 103 157 183 217 243 282 283 284 285 363 112 CABLE - Cable Set Top Boxes BRAND CODE NUMBERS 103 003 004 039 042 046 053 115 111 110 043 074 ABC ADB ADELPHIA ADVANCED NEWHOUSE 043 043 ALTRIO 099 AMERICAST 014 ANTRONIX 005 007 014 ARCHER ARMSTRONG 074 AT&T 151 AT&T BROADBAND 074 ATLANTIC BROADBAND 043 074 099 BELL SOUTH 043 074 BLUE RIDGE BRESNAN 074 BUCKEYE COMM 074 CABLEVISION 108 043 074 41 CABLE (continued) - Cable Set Top Boxes BRAND CODE NUMBERS 153 101 020 030 040 057 066 032 008 054 072 092 007 111 110 043 074 113 151 043 007 074 080 081 110 043 074 113 074 030 CENTURION CENTURY CHARTER CISCO CITIZEN COGECO COMBANO COMCAST COMSAT COMTRONICS COX DIGITAL CABLE 043 074 DIGEO DIGICABLE EAGLE EASTERN ELECTRICORD GEMINI GE GENERAL INSTRUMENT 103 002 003 004 008 009 010 069 074 104 099 GNC GOLDEN CHANNEL 030 HAMLIN HITACHI INSIGHT JERROLD M-NET MAGNAVOX MASSILLON MEDIA ONE MEDICOM MEMOREX MOTOROLA MOVIE TIME MOXI NCTC NOVAPLEX NOW TV NSC OAK PACE PANASONIC PARAGON PHILIPS PIONEER PRUCER PTS PULSAR QUEST RCA RCN RECOTON REGAL REGENCY RODGERS SAMSUNG SCIENTIFIC ATLANTA 123 043 003 011 041 042 045 046 151 049 050 055 103 055 074 103 002 003 004 008 009 010 069 074 104 109 110 037 010 012 064 079 094 074 107 074 052 151 152 110 111 112 120 103 002 003 004 008 009 010 069 074 104 109 028 032 111 153 074 092 114 015 028 038 071 031 037 053 043 074 113 044 047 052 006 012 013 020 085 103 034 051 063 076 105 043 059 011 071 074 052 112 047 074 098 049 050 057 043 123 030 42 CABLE (continued) - Cable Set Top Boxes BRAND CODE NUMBERS SEREN 043 SERVICE ELECTRIC 074 074 SHAW SIGECOM 043 030 SIGNAL 103 SIGNATURE 030 SL MARX 108 SONY SPRUCER 047 078 002 004 008 009 STARCOM 008 030 097 104 STARGATE 043 074 SUSQUEHANNA 030 TADIRAN 030 TIMELESS TIME WARNER 043 074 039 040 056 TOCOM 052 TOSHIBA 007 014 UNIKA 004 053 UNITED CABLE UNIVERSAL 005 007 014 032 035 043 VIDEOTRON 012 015 018 086 087 088 089 VIEWSTAR 110 121 VERIZON 043 099 WIDE OPEN WEST ZENITH 052 060 093 100 CABLE - WEBTVs CODE NUMBERS BRAND 106 ECHOSTAR 102 MITSUBISHI SONY 096 PHILIPS/MAGNAVOX 095 DVD - DVD Players BRAND CODE NUMBERS 157 098 281 111 112 115 116 236 122 284 ADCOM ALPINE AKAI APEX DIGITAL ARCAM AUDIOVOX CALIFORNIA AUDIO 021 124 CAMBRIDGE AUDIO 215 323 333 CARY AUDIO DESIGN 174 312 CLASSE COBY CYBERHOME DENON 167 258 260 326 327 271 313 329 007 080 173 287 288 43 DVD (continued) - DVD Players BRAND CODE NUMBERS 190 143 143 143 175 026 027 021 083 137 091 220 221 222 DP-1 DURABRAND EMERSON ESA GATEWAY GE GRADIENTE GRUNDIG GO VIDEO HARMAN KARDON 084 140 HITACHI FUNAI ILO INSIGNIA INTEGRA JVC KENWOOD KISS KLH KRELL LECSON LEXICON LG LINN LITEON MAGNAVOX MALATA MARANTZ MCINTOSH MEMOREX MERIDIAN MINTEK MITSUBISHI MYRYAD NAD NAKAMICHI ONKYO OPPO PANASONIC PARASOUND PHILIPS PIONEER POLKAUDIO POLAROID PRIMARE PROCEED PROSCAN RCA RJTECH ROTEL SAMSUNG SANSUI SANYO SENSORY SCIENCE 223 222 325 094 SHARP SHERWOOD 245 246 247 248 249 250 101 143 268 292 143 297 322 331 324 142 180 192 280 338 302 012 123 151 279 135 104 126 305 148 303 321 322 091 057 074 306 309 320 264 265 096 066 143 282 267 083 105 201 202 315 332 125 163 153 111 282 017 134 102 278 088 155 103 324 314 274 280 076 035 180 338 266 311 312 289 285 205 198 199 021 042 139 144 150 245 317 276 277 066 095 105 166 176 303 304 305 172 213 283 092 099 107 108 131 162 337 083 235 236 237 284 295 296 297 193 194 086 026 027 290 307 026 027 273 269 335 336 275 301 200 056 070 119 137 159 165 170 154 147 44 DVD (continued) - DVD Players BRAND SONY SPECTRONIQ SUPERSCAN SV2000 SYLVANIA SYMPHONIC TAG MCLAREN TEAC THOMPSON THULE TOSHIBA TRUTECH VENTURER VINC YAMAHA ZENITH CODE NUMBERS 286 033 118 126 145 160 189 191 238 239 240 241 242 243 310 143 143 143 143 156 270 026 027 177 273 298 300 319 035 034 128 141 130 164 187 188 214 293 149 161 308 042 089 066 158 166 195 196 197 328 334 057 074 091 182 DVD - TV/DVD Combos CODE NUMBERS BRAND AUDIOVOX COBI DURABRAND EMERSON ESA FUNAI INSIGNIA MINTEK POLAROID SAMSUNG SV2000 SYLVANIA SYMPHONIC TRUTECH TOSHIBA 284 327 143 143 143 143 143 292 282 284 295 296 297 165 143 143 143 293 130 300 DVD - TV/DVD/VCR Combos BRAND DURABRAND EMERSON ESA INSIGNIA MAGNAVOX PANASONIC POLAROID SYLVANIA SIMPHONIC TOSHIBA 143 143 143 143 143 144 205 235 143 143 164 298 CODE NUMBERS 45 DVD - DVD/VCR Combos CODE NUMBERS 137 150 105 (VCR Functions for VCR 067) 137 159 154 141 187 214 091 182 BRAND GO VIDEO PANASONIC PHILIPS SAMSUNG SANSUI TOSHIBA ZENITH DVD - DVD Recorders CODE NUMBERS BRAND CYBERHOME 271 GATEWAY 175 GO VIDEO 220 221 222 ILO 268 KISS 279 LITEON 265 320 LG 303 321 322 ONKYO 324 PANASONIC 139 289 PHILIPS 176 277 317 PIONEER 172 SAMSUNG 301 SENSORY SCIENCE 222 SONY TOSHIBA ZENITH 191 238 239 240 241 242 243 188 182 BRAND DENON FUNAI KENWOOD MAGNAVOX MARANTZ MITSUBISHI NAD OPTIMUS PANASONIC PHILIPS PIONEER RADIO SHACK RCA REALISTIC RUNCO SANYO SHARP SONY TECHNICS DVD - Laser Disc Players CODE NUMBERS 206 207 120 152 013 032 121 211 121 121 049 013 113 032 106 117 121 120 002 049 127 075 152 013 053 110 113 46 DVD (continued) - Laser Disc Players BRAND THETA DIGITAL TOSHIBA YAMAHA 032 152 106 043 129 CODE NUMBERS VCR - VCRs BRAND CODE NUMBERS 035 037 129 028 031 108 003 040 135 031 041 005 007 010 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 005 006 017 025 027 029 031 034 035 036 037 046 101 116 129 131 138 003 008 009 010 034 031 063 072 107 109 132 136 040 115 012 013 020 101 106 114 123 034 016 043 046 124 125 072 031 AIWA AKAI AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 BROOKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR HARMAN KARDON 012 045 HITACHI INSTANTREPLAY JCL JCPENNEY JENSEN JVC KENWOOD LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA 004 018 026 034 043 063 137 013 031 031 012 013 015 040 066 101 043 012 031 043 048 050 055 060 130 014 048 034 047 034 003 009 017 034 106 040 031 034 041 067 068 012 031 067 069 101 027 030 031 003 010 014 031 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 051 059 061 049 034 040 024 034 012 023 039 043 048 043 053 054 47 VCR (continued) - VCRs BRAND CODE NUMBERS 025 ORION 066 070 083 133 140 074 PANASONIC 013 020 031 063 PENTAX 031 034 067 PHILCO 031 034 054 067 071 101 PHILIPS 101 PILOT 013 021 048 PIONEER 108 PORTLAND 072 PULSAR 002 014 QUARTZ 066 075 QUASAR 123 RADIO SHACK 013 020 041 107 109 140 034 040 RCA 003 008 010 014 031 034 040 053 054 101 REALISTIC 058 RICO 014 SALORA 032 040 066 102 104 107 109 112 113 115 120 122 125 SAMSUNG 022 043 048 135 SANSUI 003 007 010 014 134 102 SANYO 017 037 112 129 131 SCOTT 003 008 009 010 013 014 081 101 017 073 112 SEARS 031 054 SHARP 024 SHINTOM 034 SIGNATURE 003 031 052 056 057 058 076 077 078 SONY 034 SOUNDESIGN 013 STS 031 034 059 067 SYLVANIA 034 SYMPHONIC 010 034 TANDY 039 043 TATUNG 034 039 043 TEAC 031 070 TECHNICS 019 031 034 101 TEKNIKA 034 THOMAS 006 TMK 008 013 042 047 059 079 082 112 131 081 TOSHIBA 040 101 TOTEVISION UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS YAMAHA ZENITH 040 003 013 017 024 031 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 VCR - TV/VCR Combos BRAND DAEWOO 005 117 FUNAI GOLDSTAR 101 123 034 CODE NUMBERS 48 VCR (continued) - TV/VCR Combos CODE NUMBERS BRAND HITACHI 034 JCPENNEY 101 LG LLOYD MAGNAVOX MEMOREX PANASONIC PHILIPS RADIO SHACK RCA SEARS SONY SYLVANIA SYMPHONIC THOMAS ZENITH 101 123 034 034 067 101 070 034 067 123 034 101 057 067 034 034 034 AUDIO - Amps, Preamps and A/V Receivers BRAND CODE NUMBERS 007 ADC 771 082 092 225 161 355 356 366 ADCOM 699 018 104 170 188 AIWA 138 189 AKAI 038 125 126 127 128 AMC 054 AMEND 196 AMX 142 ANGSTROM 337 ANTHEM 687 157 158 042 043 081 112 ARAGON 418 419 504 590 591 592 793 794 141 ARCAM 342 ATLANTIC TECHNOLOGY AUDIO ACCESS 147 AUDIO ALCHEMY 135 AUDIO CONTROL AUDIO DESIGN ASSOCIATES AUDIO EASE AUDIO FILE AUDIO MATRIX AUDIO RESEARCH 399 406 423 424 425 426 AUDIO TECHNICA 134 B & K BEL CANTO BOSE BOSTON ACOUSTICS 447 555 BRIX BRYSTON 551 023 CAMBRIDGE AUDIO 522 523 524 525 630 683 684 552 CARVER CARY AUDIO DESIGN 757 759 443 519 CASIO CHIRO CINEMA SOUND 801 802 803 804 805 747 748 789 790 409 459 460 070 170 347 448 572 194 011 021 196 071 167 076 140 034 134 49 006 027 028 061 071 180 185 022 029 077 AUDIO (continued) - Amps, Preamps and A/V Receivers BRAND CODE NUMBERS 148 CITATION 537 410 411 484 CLASSE CLARION 026 COLORADO VNET 539 076 CURTIS MATHES 415 515 614 DELPHI 811 812 820 821 822 002 034 109 027 037 259 340 349 400 402 422 564 601 DENON 602 649 678 679 700 809 810 099 098 149 057 290 468 469 470 471 472 481 482 483 508 509 368 381 451 352 047 180 182 297 378 062 342 056 008 174 EAD EIGER ELAN ESCIENT FANFARE FISHER FLEXTRONICS FOSGATE GE GOLDSTAR HAFLER HARMAN KARDON 153 154 118 121 317 318 365 HITACHI INKEL INSIGNIA INTEGRA JAMO JBL JCPENNEY JENSEN JVC KENWOOD 020 197 589 682 781 782 784 354 438 439 440 441 442 486 570 584 696 785 786 398 799 263 621 076 058 743 163 191 114 389 390 420 517 550 026 066 145 146 181 190 197 192 182 199 151 222 180 005 367 374 412 413 140 686 157 158 042 043 081 112 687 531 573 624 672 674 150 072 376 384 499 500 007 120 357 360 364 837 838 839 761 763 764 124 377 137 139 052 165 115 004 009 076 056 086 164 152 488 492 493 563 721 722 725 726 728 744 754 770 779 780 006 028 031 040 063 185 186 119 289 385 496 076 628 100 012 013 394 119 157 158 042 043 081 112 386 KINERGETICS KLEGG KLIPSCH KNOLL KOSS KRELL KYOCERA LEXICON LINN LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MERIDIAN MICRO LAB MICROMEGA MONDIAL MOTOROLA MUSICAL FIDELITY 407 408 647 648 MYRYAD NAD NAIM 293 455 457 603 186 113 478 479 598 533 534 535 50 AUDIO (continued) - Amps, Preamps and A/V Receivers BRAND NAKAMICHI NEC NETSTREAMS NEXUS AUDIO NHT NILES NIRO NUFORCE NUVO OLIVE ONKYO OPTIMUS OUTLAW PANASONIC PARASOUND PASS LABS PHAST PHILIPS PIONEER PLINIUS POLKAUDIO PRIMARE PROCEED QUAD RCA REALISTIC REQUEST ROKU REVOX ROTEL RUSSOUND SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHERWOOD SIRIUS SIMAUDIO SLIM DEVICES SONANCE SONY CODE NUMBERS 111 172 183 287 176 616 620 749 750 751 691 403 343 766 404 405 606 607 608 609 610 584 781 782 784 017 046 064 107 108 187 079 080 090 179 275 438 439 440 441 442 486 536 552 629 786 026 041 138 342 797 798 032 195 177 292 383 516 626 627 553 129 130 132 294 295 333 334 431 196 690 063 119 296 823 827 828 545 546 556 014 033 039 044 045 050 069 159 168 116 035 078 198 397 480 513 518 520 521 542 458 685 709 710 829 830 514 029 461 462 463 464 465 144 526 549 010 048 117 156 067 019 056 073 075 095 731 732 733 351 511 611 506 507 162 501 502 503 654 074 083 085 527 379 391 392 445 446 016 571 653 040 048 110 119 065 047 059 019 091 076 652 026 051 094 131 175 181 388 447 562 682 024 038 055 102 103 105 106 051 030 585 555 767 449 512 775 776 777 901 902 703 631 693 018 084 093 223 160 166 015 101 184 353 369 372 380 395 417 421 574 036 SOUNDESIGN SOUNDSTREAM 084 088 SOUNDMATTERS 375 SPEAKERCRAFT SSI STS SUGDEN SUMO SUNFIRE SYSTEMLINE 508 509 741 742 068 007 430 171 344 345 346 494 495 759 760 51 AUDIO (continued) - Amps, Preamps and A/V Receivers BRAND CODE NUMBERS TAEKWANG TEAC TECHNICS THETA DIGITAL TOSHIBA TURTLE BEACH WARDS XANTECH XM SATELLITE RADIO 614 415 514 515 556 YAMAHA 138 005 019 049 111 122 176 193 178 177 262 136 060 087 198 510 416 180 508 509 831 026 169 067 123 133 173 264 089 332 373 427 428 432 434 436 540 541 557 558 561 565 566 581 583 599 600 643 644 655 661 662 663 664 665 667 668 669 676 711 715 717 720 461 740 752 753 897 485 143 587 YBA ZENITH ZON AUDIO - XM Radios & Tuners CODE NUMBERS BRAND ARCAM BOSE DELPHI FANFARE KENWOOD MYRYAD NAD NAIM NUVO MUSICAL FIDELITY PIONEER POLKAUDIO PRIMARE RUSSOUND SIRIUS SONY XM SATELLITE RADIO 415 514 515 504 591 170 415 515 352 550 457 113 535 404 405 606 607 408 648 556 514 465 445 446 585 555 380 BRAND ALPHASTAR AMPLICA ASTON ATLANTA DTH BIRDVIEW BSR CABLEVISION CAPETRONICS CHANNEL MASTER CHAPARRAL SAT - Satellite Receivers CODE NUMBERS 123 050 206 203 129 113 051 126 053 148 053 013 014 015 018 036 055 008 009 012 077 52 SAT (continued) - Satellite Receivers BRAND CODE NUMBERS 122 139 140 202 080 044 029 054 211 050 122 167 168 173 193 220 221 223 224 225 226 227 228 005 006 007 010 011 112 116 141 052 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 167 168 089 114 114 122 177 178 017 021 022 027 133 134 151 106 150 CITOH COOLSAT CURTIS MATHES DISH NETWORK DIRECTV DRAKE DREAM MULTIMEDIA 191 205 DX ANTENNA ECHOSTAR ELECTROHOME EURO PLUS EUROSAT EXPRESSVU FORTEC STAR FUJITSU GE GENERAL INSTRUMENT 003 004 016 029 031 059 101 148 GOI HITACHI HIRSCHMANN HOME CABLE HOUSTON TRACKER 033 037 039 104 057 051 122 HTS 068 154 161 162 165 166 220 221 223 224 225 226 227 228 HUGHES 053 HYTEK 149 HYUNDAI 023 ICR 060 147 JANIEL 148 JERROLD 122 JVC 108 KATHREIN 208 KPN 057 LEGEND 170 LG 144 062 LUXOR 010 059 063 064 065 MACOM 152 153 MARANTZ MEMOREX 057 MICRONIK MULTIMEDIA 207 MITSUBISHI MOTOROLA NEXT LEVEL NEXTWAVE NFUSION NORSAT NTL NV PACE PANASONIC PANSAT PERSONAL CABLE PHILIPS PL PRESIDENT PRIMESTAR PROSAT 068 154 148 171 148 028 124 125 192 069 070 209 195 196 197 143 173 142 060 121 172 117 201 071 152 153 068 154 156 023 026 019 102 110 030 072 53 SAT (continued) - Satellite Receivers BRAND PROSCAN RADIOSHACK RCA REALISTIC SAB SAMSUNG SATCRUISER SATELLITE SERVICE SKY SONY STARCAST STAR CHOICE SUPERGUIDE TEECOM TOSHIBA TOWN & COUNTRY UNIDEN VIEWSTAR VOOM WINEGARD ZENITH CODE NUMBERS 151 106 150 148 151 106 150 043 074 195 196 197 198 199 200 155 123 163 169 179 192 028 035 047 085 171 204 230 103 104 041 148 020 124 125 023 026 075 087 088 090 107 130 137 002 127 157 158 068 154 023 026 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 148 128 146 081 082 083 084 091 120 159 CD - CD Players and Changers BRAND CODE NUMBERS 062 042 ADCOM 012 059 065 088 089 105 122 170 187 AIWA 085 195 202 AKAI 231 232 AMC 118 AMEND 238 275 ARCAM 119 147 AUDIO ACCESS AUDIO EASE 165 AUDIO TECHNICA 046 227 BEL CANTO 037 057 BSR 103 008 CALIFORNIA AUDIO 268 CAMBRIDGE AUDIO CAPETRONIC 063 057 080 CARRERA 185 041 044 050 086 107 130 134 135 138 139 203 204 167 CARVER CASIO 111 182 CARY AUDIO DESIGN 261 262 289 290 291 292 CLASSE CLARINETTE CREEK CROWN DCS DENON EMERSON FISHER FRABA GENEXXA 267 182 159 035 294 002 123 281 042 069 102 050 185 134 008 111 010 069 102 54 CD (continued) - CD Players and Changers BRAND GOLDSTAR HAITAI HARMAN KARDON HITACHI INKEL INSIGNIA INTEGRA JCPENNEY JENSEN JVC KENWOOD KOSS KRELL KYOCERA LINN LOTTE LUXMAN LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX MISSION MITSUBISHI MITSUMI MODULAIRE MONDIAL MUSICAL FIDELITY MYRYAD NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PLINIUS PRIMARE PROCEED PROTON QUAD QUASAR RADIO SHACK RCA REALISTIC ROTEL SAE SANSUI SANYO SCOTT SHARP CODE NUMBERS 080 093 272 018 033 047 208 042 175 130 143 144 298 030 273 014 061 092 141 158 004 022 136 163 213 214 242 243 286 185 007 023 055 071 072 142 137 254 061 241 279 285 302 005 295 102 011 028 070 076 249 252 059 044 107 246 274 296 297 027 041 044 051 077 107 209 301 212 247 014 073 092 010 044 107 179 153 182 147 258 284 244 265 006 005 067 178 293 217 218 219 095 014 062 046 044 107 030 038 039 168 169 273 010 050 057 058 081 082 083 085 093 195 103 201 172 008 068 248 233 240 041 044 107 246 253 010 020 025 056 174 175 176 257 263 288 266 239 044 107 228 269 103 008 182 017 042 150 276 042 050 051 102 181 182 187 044 107 161 178 250 044 107 044 069 107 128 171 190 125 050 069 102 026 031 051 066 55 CD (continued) - CD Players and Changers BRAND SHERWOOD SIGNATURE SIMAUDIO SONY SOUNDESIGN SUGDEN SUMO SYLVANIA SYMPHONIC TAEKWANG TANDY TEAC TECHNICS TECHWOOD THETA DIGITAL TOSHIBA VECTOR RESEARCH VICTOR WARDS YAMAHA YORX CODE NUMBERS 003 019 051 096 112 115 119 166 033 280 048 081 097 126 133 177 225 226 164 229 230 259 260 277 278 251 264 155 044 107 052 181 195 085 010 015 034 036 051 052 101 131 140 079 145 060 103 200 172 184 008 068 076 234 235 270 006 067 091 160 148 080 004 022 114 124 185 033 024 046 054 186 183 236 282 283 287 182 DVR - Digital Video Recorders (TiVo, Replay) BRAND CODE NUMBERS DIRECTV HUGHES HUMAX PHILIPS PIONEER RCA REPLAY TV SONY TIVO 117 121 122 123 124 125 126 127 128 117 121 122 123 124 125 126 127 128 118 121 122 123 124 125 126 127 128 090 117 121 122 123 124 125 126 127 128 117 118 121 122 123 124 125 126 127 128 109 075 104 105 131 090 117 118 121 122 123 124 125 126 127 128 AUX - Custom Installation Products BRAND CODE NUMBERS 574 575 573 571 572 152 164 401 412 476 155 586 578 579 580 618 UNIVERSAL REMOTE CONTROL 3M AIWA APPLE ARCHER ARTEC ATON AUDIO AUTHORITY 427 428 AURORA AUTON AURORA MULTIMEDIA 220 AVERMEDIA 300 434 191 437 460 56 AUX (continued) - Custom Installation Products BRAND CODE NUMBERS BEDIENUNGSANLEITUNG 221 409 BOSE CASTI 587 CHANNEL VISION 561 562 563 564 556 CHIEF 556 CLO SYSTEMS 591 COMPONEXX 495 CONTROL4 588 CRAIG 440 D-BOX 468 469 470 DCS 403 DDI 261 DELL DENON 559 DIGITAL STREAM 609 435 479 DLINK 418 DLO DMX 156 DRAPER SCREEN 204 DREAMVISION 097 299 423 576 577 DVDO 080 DWIN 451 452 453 454 455 456 457 458 441 442 443 444 445 446 447 448 449 521 ELAN 522 538 541 542 543 544 545 546 547 548 438 478 431 432 206 151 433 430 184 436 209 558 261 592 471 294 295 481 252 261 219 555 589 299 567 439 407 419 153 185 416 556 259 459 406 185 461 462 464 465 551 463 595 297 425 592 ELECTROKINETICS ELGATO ELITE SCREENS EVERQUEST EXTRON FARENHEIT FAROUDJA FOCAL FUJI FUZE MEDIA SYSTEMS GATEWAY GRIDLINK GRIFFIN HAUPPAUGE HP HUNTER DOUGLAS IHOME INET ACCESS INSIGNIA INTEGRA IOGEAR IPORT JERROLD JVC K2 MOUNTS KALEIDESCAPE KENSINGTON KENWOOD KEY DIGITAL KEYSPAN KLIPSCH LASONIC 57 AUX (continued) - Custom Installation Products BRAND CODE NUMBERS 296 LG 270 566 LINKSYS 472 LUMAGEN 417 LUTRON 424 LUXOM 584 MAGNAVOX 186 201 MAKITA 450 MARANTZ 408 481 107 252 261 MICROSOFT 205 MINDPATH 477 NETGEAR 160 187 272 NILES 161 NSM 421 NTI 554 NYKO 439 ONKYO 552 OMNIMOUNT 556 PEERLESS 584 PHILCO 085 PIANO DISC 405 PINNACLE 557 539 540 162 POLKAUDIO 402 PRIMARE 480 PSYCLONE 258 585 RCA 565 ROKU 466 RUNCO 081 RUSSOUND 549 SAGETV 592 SANSONIC 156 163 SCIENTIFIC ATLANTA 467 SHERWOOD 082 429 SIMA SKARDIN 610 SOLO ELECTRONICS 207 411 078 079 SOMFY 419 SONANCE 554 414 164 165 166 271 261 SONY 473 474 SPEAKERCRAFT STARCOM 153 TEN TECHNOLOGY 401 TIVAX TURBOSCAN VELODYNE VUDU VUTEC WURLITZER XANTECH ZINWELL ZENITH ZENTECH 589 590 167 413 203 553 560 410 420 426 168 169 170 171 172 276 277 278 279 280 282 283 284 285 286 287 288 289 290 291 292 293 591 593 567 610 58 AUX - Media PC Controls CODE NUMBERS BRAND DELL GATEWAY HAUPPAUGE HP KEYSPAN MICROSOFT SONY 261 261 294 295 252 261 297 252 261 261 271 AUX - GAME Systems CODE NUMBERS AUX - iPod Controls CODE NUMBERS BRAND MICROSOFT/XBOX 107 408 SONY 414 BRAND APPLE/iPod BOSE DLO IPORT KENSINGTON SONANCE TEN TECHNOLOGY 401 412 409 418 419 406 419 401 BRAND AIWA CARVER DENON FISHER GOLDSTAR HARMAN KARDON JVC KENWOOD LINN LUXMAN MAGNAVOX MARANTZ MCINTOSH MITSUBISHI NAD NAKAMICHI ONKYO OPTIMUS PANASONIC AUX - Tape Decks CODE NUMBERS 015 071 100 114 006 008 027 024 036 137 105 227 229 064 011 233 106 116 239 240 005 013 023 026 064 145 146 181 190 124 035 137 139 027 014 027 056 065 087 238 242 243 029 048 244 245 025 002 012 016 017 018 019 115 026 054 055 007 010 032 088 195 59 AUX (continued) - Tape Decks CODE NUMBERS 027 087 003 039 047 050 066 098 222 007 088 027 113 119 224 026 057 131 175 181 038 004 028 030 033 034 020 022 052 084 089 009 059 212 007 010 076 088 109 122 193 112 106 021 026 031 067 040 AUX - Lighting Systems CODE NUMBERS 311 312 321 208 212 307 077 158 159 306 308 309 340 341 301 302 303 304 305 319 320 093 183 257 188 189 BRAND PHILIPS PIONEER QUASAR SANSUI SHARP SHERWOOD SONY TEAC TECHNICS TOSHIBA VICTOR YAMAHA BRAND COLORADO VNET LEVITON LITE TOUCH LIGHTOLIER CONTROLS LUTRON RAKO WATT STOPPER X-10 XANTECH 60 T h e M X - 3 5 0 Frequently Asked Questions What is a macro button?

It is an MX-350 button you set to make a lot of things happen when you press it. For example, to watch a DVD in most home theaters requires several remote controls and many button presses (power up the TV, power up the surround sound, power up the DVD player, set the TV to the correct video input, set the surround sound to the correct audio input and finally; press play on the DVD player remote control). Instead of pressing all of those buttons one at a time, the MX-350 enables you to setup one button that does it all automatically with one press. For more information on how and why you should setup macro and favorite channel buttons, read pages 19-22. If the batteries run out, will I lose my settings?

No. The MX-350 stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your con-

venience and the MX-350 would still remember your settings. Who can I call for more answers?

The Universal Remote Control technical support and customer service staff are ready to answer any questions you might have. Call us at 1-914-835-4484 Monday - Friday, 9AM to 6PM (EST) 61 Universal Remote Control, Inc. USALimited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warrantedagainst defects in materials or workmanship as follows:

UNIVERSALREMOTE CONTROL,INC. warrants this product against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange the product for a comparablenew or rebuilt product. In the event of a defect, these are your exclusive remedies. This Limited Warranty covers only the hardware components packaged with the Product. Itdoes not cover technical assistance for hardware or software usage and it does not coverany software products whether or not contained in the Product; any such software is pro-vided "AS IS" unless expressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid, in its originalpackaging or packaging affording adequate protection to Universal Remote Control at theaddress provided in the Owner's Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may have been programmed intoyour unit. It is likely that such data, software, or other materials will be lost during serviceand Universal Remote Control will not be responsible for any such damage or loss. Adated purchase receipt, Bill of Sale, Installation Contract or other verifiable Proof ofPurchase is required. For product support and other important information visit UniversalRemote Control's website:

http://www.UniversalRemoteControl.com or call the UniversalRemote Control Customer Service Center (914) 835-4484. This Limited Warranty only covers product issues caused by defects in material or work-manship during ordinary consumer use. It does not cover product issues caused by anyother reason, including but not limited to product issues due to commercial use, acts ofGod, third-party installation, misuse, limitations of technology, or modification of or to anypart of the Universal Remote Control product. This Limited Warranty does not coverUniversal Remote Control products sold as USED, AS IS, REFURBISHED, so-called "BSTOCK" or consumables (such as batteries). This Limited Warranty is invalid if the factory-applied serial number has 62 Universal Remote Control, Inc. been altered or removed from the product. This LimitedWarranty is valid only in the United States of America. This Limited Warranty specificallyexcludes products sold by unauthorized resellers. UNIVERSALREMOTE CONTROLSHALLNOT BE LIABLE FOR ANYINCIDENTALORCONSEQUENTIALDAMAGES FOR BREACH OF ANYEXPRESS OR IMPLIED WARRANTYOR CONDITION ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BYAPPLICABLE LAW, THERE IS NO OTHER WARRANTYEXPRESSED OR IMPLIED. UNIVER-SALREMOTE CONTROLWILLNOT BE HELD RESPONSIBLE FOR STATEMENTS MADEBYOTHERS CONCERNING THE MERCHANTABILITYOR FITNESS FOR APARTICULARPURPOSE ON THIS PRODUCT. Some states or jurisdictions do not allow the exclusion orlimitation of incidental or consequential damages, or allow limitations on how long animplied warranty lasts, so the above limitations or exclusions may not apply to you. ThisLimited Warranty gives you specific legal rights and you may have other rights which varyfrom state to state or jurisdiction to jurisdiction. Specifications Learning Capability - 784 IR commands at standard frequencies (15KHz to 455 KHz) Macro Capability - 472 Macros of up to 190 steps each IR Range (Line of Sight via Infrared): 30-50 feet, depending on the envi-

ronment RF Range (radio frequency): 50 to 100 feet, depending upon the envi-

ronment RF Frequency: 418MHz Weight: 8 oz. (with batteries) Size: 8.5 x 2 7/16 x 1 Batteries: Four AAA Alkaline batteries included LCD Size: approximately 7/8 x 1-7/8 63 Universal Remote Control, Inc. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help. Warning!

Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 64 N O T E 65 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 OCE-0024B REV. 09

Order Number Test Report Number

: GETEC-C1-09-177

: GETEC-E3-09-101 FCC Part 15 subpart C Page 1 / 2 APPENDIX C

: ID SAMPLE LABEL & LOCATION EUT Type: RF Remote Controller FCC ID.: OZ5URCMX-350N Order Number Test Report Number

: GETEC-C1-09-177

: GETEC-E3-09-101 FCC Part 15 subpart C Page 2 / 2 LABELLING REQUIREMENTS The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase.

ID Label

ID Label Location of EUT ID Label EUT Type: RF Remote Controller FCC ID.: OZ5URCMX-350N

Order Number Test Report Number

: GETEC-C1-09-177

: GETEC-E3-09-101 FCC Part 15 subpart C Page 1 / 1 APPENDIX A

: ATTESTATION STATEMENT EUT Type: RF Remote Controller FCC ID.: OZ5URCMX-350N

OHSUNG ELECTRONICS CoO., LTD

#181 Gongdan-Dong, Gumi-Si,Gyeongsangbuk-Do, Korea Tel: +82-54-468-7282, Fax: +82-54-461-8368 Federal Communications Commission Authorization and Evaluation Division Subject: Confidentiality Request regarding application for certification FCC ID: OZ5URCMX-350N Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name BLOCK DIAGRAM CONF(L)_ URCMX-350N_BIkDia.pdf SCHEMETIC DIAGRAM CONF(L) URCMX-350N_SchDia.pdf OPERATIONAL DESCRIPTION CONF(L) URCMX-350N_OpeDes.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In addition to above mentioned documents, pursuant to Public DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following Exhibit Type File Name TEST SET UP PHOTOS CONF(S) URCMX-350N _Tsup.pdf EXTERNAL PHOTOGRAPHS CONF(S)_ URCMX-350N_ExtPho.pdf INTERNAL PHOTOGRAPHS CONF(S) URCMX-350N_IntPho.pdf USERS MANUAL CONF(S)_ URCMX-350N_UseMan.pdf The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Kwang-Jae Ok, Q.C Manager OHSUNG ELECTRONICS CO.,LTD