Order Number
: GETEC-C1-23-608 Test Report Number
: GETEC-E3-23-063 FCC Part 15 subpart C Page 1 / 1 APPENDIX H
: USERS MANUAL EUT Type: Wi-Fi Dongle FCC ID.: OZ5C307-HW-WF Wi-Fi Dongle User Information Model Name : C307-HW-WF English Table of Contents 1. Overview and specification of the remote control
(1) Overview
(2) Specification 2. Customer Support 1. Overview and Specifications for the Remote Control
(1) Overview Please refer to the SET manual for instructions on how to use the Wi-Fi Dongle. This product is powered by USB TYPE and operates by connecting to the designated USB CONNECTOR in the customer's SET. End users can check operation methods through manuals, guides, etc included in the installed SET.
(2) Specifications Categories Details Model No. C307-HW-WF Range of frequency Wi-Fi, 802.11b/g/n 2.400 GHz ~ 2.4835 GHz RF Power(Max) 20dBm(EIRP) Channel 13 channels Power source USB 5V(4.5V~5.5V) Operational temperature range
-40~60
"This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum"
2. Customer Support Refer to the contact number for services provided in the SET. Federal Communications Commission(FCC) Statement Federal Communications Commission(FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Industry Canada Statement
[English]
Industry Canada Statement
(For Canada) This device complies with Industry Canadas licence-exempt RSS Stadard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis d'industrie canada Cet appareil est conforme aux normes CNR dIndustrie Canada applicables aux dispositifs exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) 2) lappareil ne doit pas produire de brouillage;
lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement
(For Canada This equipment complies with IC radiation exposure limits set forth for an Uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.