User Manual BX3.0 Bluetooth Receiver CON3 CON2 CON1 Pin Assignment Pin Connector CON1
(Power & AF OUT) 1 2 3 4 5 6 AF GND AF GND N.C +12V CON2
(LED) CON3
(LED & Power S.W) PW S.W Operation 1. Short the Power S.W (CON3, Pin3,4) to activate Bluetooth function. 2. A prompt tone will come out and the PWR indicator (CON3) / LINK indicator (CON2) will flash as a sign of pairing in action. 3. When in pairing mode, activate Bluetooth connection on your smartphone or any target device you want to do so. Find a device name of okayo GPA on pairing list and get your smartphone connected. 4. When the pairing is done successfully, it will come out with a prompt tone again. The indicators will light steady and the music will get from CON1 (AF). 5. During Bluetooth connection, it will stop audio playback when a call is made to your smartphone . When the call is finished, Bluetooth will be relinked automatically and audio files will be played. 6. When Bluetooth connection is out of range, it could be relinked automatically if users get back to service range shortly. However, it depends on applied OS platform of the smartphone. In some cases, you get to manually connect Bluetooth again. 07/13 User Manual BX3.0 Bluetooth Receiver FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of f and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the p arty responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Label for end product must include Contains FCC ID: NTMBX-501701 or A RF transmitter inside, FCC ID: NTMBX-501701. Specifications are subject to change 07/13