Wireless ENG / EFP System Dual-Antenna Receiver Handheld Microphone Bodypack Transmitter Manufacturers Declaration This product meets the following standards:
Federal Communications Commission Interference Statement Europe EU Declaration of Conformity This device complies with Directive 2014/53/EU issued by the Commission of the European Community. WEEE Statement Electrical and electronic equipment must be disposed of at the end of their lifespan separately from household waste. Please dispose of this equipment at your local waste collection or recycling center. Please help to protect our environment. Safety and Electromagnetic Emissions Certificates Standard Compliance RoHs compliant European Directive 2011/65/EU Certificates CE FCC Table of contents p. 1 ~ p. 4 Quick start p. 5 Package p. 6 ~ p. 8 Illustration Dual-Antenna Receiver Bodypack Transmitter Handheld Microphone p. 9 ~ p. 11 Operation Inserting batteries Powering on Adjusting channels manually Checking frequency of selected channel Connecting correctly to camera or recording Tuning volume to appropriate level device Powering off p. 12 ~ p. 17 Advanced operation Finding clean channels Pairing receiver and transmitter automatically Adjusting settings Back to default p. 18 Troubleshooting (Not ready yet) p. 19 Specification (Not ready yet) WIRELESS ENG / EFP SYSTEM Quick start Step. 1 Insert 2 supplied AA batteries into receiver, transmitter and microphone. Step. 2 Press and hold the power button for 1 second to turn receiver, transmitter or microphone on. Step. 3 Receiver:
1. Press and hold the set button for 1 second until backlit screen turns to white and channel number A flashes. 2. Press or button to select preferred channel A and press the set 3. Channel number B will start to flash after above selection of channel A is 4. Press or button to select preferred channel B and then press the set button to confirm. done. button to confirm. 5. The receiver will be back to home screen after above selection of 2 1 channels are completed. WIRELESS ENG / EFP SYSTEM Bodypack Transmitter:
Press and hold the set button for 1 second until backlit screen turns to white and channel number flashes. Press or button to select preferred channel on receiver and transmitter. Press the set button again to confirm newly selected channel. Handheld Microphone:
Press and hold or button for 1 second until backlit screen turns to white and channel number flashes. Press or button to select preferred channel on microphone. The newly selected channel will automatically be confirmed after being idled for 2 seconds.
!
Make sure both receiver and transmitter are set at same channel for correct communication. 2 WIRELESS ENG / EFP SYSTEM Step. 4 Connect one of supplied cable from LINE OUT jack on receiver to camera or recording device. Receiver with 1/8 / XLR cable or Receiver with 1/8 / 1/8 cable
!
Antennas of Receiver are recommended to be sloped at a 45-
degree angle as shown below to make sure best operation range. 45 Step. 5 Connect headphone to the receiver worn by the photographer whereas supplied lapel microphone to the transmitter or handheld microphone carried by the host. 3 WIRELESS ENG / EFP SYSTEM Step. 6 Tune the headphone and microphone volume to desired level for most appropriate operation. Warning!
!
Kindly note listening at high volume for long periods may damage your hearing. 4 WIRELESS ENG / EFP SYSTEM Package Standard 1 dual-antenna receiver 2 bodypack transmitter 2 lapel microphone LM-95C 1 shoe adapter SM-9 1 1/8 to XLR connecting cable 1 1/8 to 1/8 connecting cable 6 AA alkaline batteries Optional transmitter Handheld microphone 5 WIRELESS ENG / EFP SYSTEM Illustration Dual-Antenna Receiver 11 Dual bendable whip antenna Line (Aux) Out jack Headphone jack Rx LED indicator Set button Power button Backlit screen Talk/Mute status of transmitter A Sound quality Custom ID
(max. 4 codes) Signal status of transmitter A Talk/Mute status of transmitter B Battery status of receiver Signal status of transmitter B Channel number of transmitter A Channel number of transmitter B Up / Down button Shoe adapter SM-9 Belt clip 11 Charging port 6 WIRELESS ENG / EFP SYSTEM Bodypack Transmitter 11 Whip antenna XLR Microphone jack Talk / Mute switch Line (Aux) In jack Tx / Talk LED indicator Set button Power button Backlit screen Frequency code Talk/Mute status Sound quality Battery status RF power Mic gain Channel number Up / Down button Belt clip 11 Charging port 7 WIRELESS ENG / EFP SYSTEM Handheld microphone optional Dynamic capsule Talk / Mute button Backlit screen Frequency code Talk mode Sound quality Channel number Charging port Left / Right button Power button Battery compartment Battery cover Battery status RF power Mic gain 8 WIRELESS ENG / EFP SYSTEM Operation Inserting batteries Insert 2 AA alkaline or Ni-MH rechargeable batteries into battery compartment of receiver, transmitter or handheld microphone.
!
Do not mistakenly recharge alkaline batteries via charging cable on the device. Okayo will accept no liability for any potential damage due to misuse charging behavior. Powering on Adjusting channels manually Press and hold the power button for 1 second to turn the device on. Bodypack Transmitter:
1. Press and hold the set button for 1 second until the backlit screen turns to white and channel number flashes. 2. Press or button to select preferred channel. 3. Once newly selected channel is determined, press the set button again to confirm the selection. New channel stops flashing and backlit screen is back to orange. Handheld Microphone:
1. Press and hold or button for 1 second until the backlit screen turns to white and channel number flashes. 2. Press or button to select preferred channel. 3. Newly selected channel will be confirmed after microphone is idled for 2 seconds. New channel stops flashing and backlit screen is back to orange. Checking frequency of selected channel Receiver Short press the set button to check the frequency of selected channel. 9 WIRELESS ENG / EFP SYSTEM Tuning volume to appropriate level Bodypack Transmitter Short press the set button to check the frequency of selected channel. Handheld Microphone Short press or button to check the frequency of selected channel. Receiver Short press the button to increase volume of channel A but decrease that of channel B and vice versa. Bodypack Transmitter 1. Press and hold both set and power buttons simultaneously to turn the transmitter on and enter the setting mode. 2. Press or button to scroll the options. Find MIC GAIN and press the set button again. 3. Default mic gain Mid shows up. Press or button to define preferred level. Press the set button to confirm and leave the setting of MIC GAIN. 4. To leave the setting mode, press or button to find EXIT and press the set button again. Handheld Microphone 1. Press and hold both and power buttons simultaneously to turn the microphone on and enter the setting mode. 2. Press or button to scroll the options. Find MIC GAIN and press the power button again. 10 WIRELESS ENG / EFP SYSTEM 3. Default mic gain Mid shows up. Press or button to define preferred level. Press the power button to confirm and leave the setting of MIC GAIN. 4. To leave the setting mode, press or button to find EXIT and press the power button again.
!
Kindly note listening at high volume for long periods may damage your hearing. Connecting correctly to camera or recording device Receiver 1. Mount the receiver on the camera or recording device via shoe adapter SM-9. 2. Connect supplied 1/8to XLR or 1/8 to 1/8 cable (upon preference) to camera or recording device. 3. Connect headphone with the phone jack on the receiver. Transmitter Connect supplied lapel microphone with the phone jack on the transmitter.
!
Make sure both receiver and transmitter are at same channel for correct communication. Powering off Charging via a micro-USB cable
!
Press and hold the power button for 2 seconds to turn the device off. Device will be off automatically when being connected with a micro-USB cable for battery charging. The micro-USB cable will not be a charging but a power-supply cable if device is manually turned on afterwards. 11 WIRELESS ENG / EFP SYSTEM Advanced operation Finding clean channels
(SCAN mode) Pairing receiver and transmitter automatically
(SYNC mode) Pair 1st transmitter 1. Press and hold both and power button simultaneously to turn the receiver on . 2. shows up. The receiver is at SCAN mode. Please wait for appr. 20 seconds until receiver finds clean channels. 3. When clean channels are found, the receiver will leave the SCAN mode and be back to home screen automatically. 1. Short press the power button again when the receiver is on. 2. Firstly, SYNC shows up on top of channel A which means the receiver is waiting for being paired. Turn 1st transmitter on within 20 seconds. pairing 12 Receiver 1st Transmitter WIRELESS ENG / EFP SYSTEM Pair 2nd transmitter 3. After 1st transmitter is paired, SYNC will show up on top of channel B. Turn 2nd transmitter on within 20 seconds. pairing Receiver 2nd Transmitter Pairing is done 4. When two pairing jobs are done, the receiver will leave SYNC mode and be back to home screen automatically. Pairing completed!
13 WIRELESS ENG / EFP SYSTEM Adjusting settings
(SETTING mode) 1. Press and hold both set and power buttons simultaneously to turn the receiver module on. 2. Setting mode will be entered successfully for custom adjustments. 3. Press or button to scroll options. See setting menu below.. Quality Squelch Output level Channel output Receiver mode Exit This refers to sound quality of the receiver. HQ: Higher Q (default): Regular Note: Only HQ is available in 902~928MHz. This refers to signal quality of the receiver. The better the signal quality, the shorter the operation range. Hi: Operation range will be shorter. Lo (default): Operation range will be greater. LINE (default) MIC A+B (default): Both transmitter A and B will be heard. A/B: Either transmitter A or B will be heard. Dual Rx (default) Single Rx
-
4. Press the set button again to confirm the selection and leave the setting.. 5. To leave the SETTING mode, find EXIT on the menu and press the set button. 14 Receiver WIRELESS ENG / EFP SYSTEM Transmitter 1. Press and hold both set and power buttons simultaneously to turn the transmitter on. 2. Setting mode will be entered successfully for custom adjustments. 3. Press or button to scroll options. See setting menu below.. Quality RF power Mic gain Exit This refers to sound quality of the receiver. HQ: Higher Q (default): Regular Note: Only HQ is available in 902~928MHz. Power definition will vary upon countries. Hi: Operation range will be greater. Lo (default): Operation range will be shorter. 1~16 dB (Default: 8 dB)
-
4. Press the set button again to confirm the selection and leave the setting.. 5. To leave the SETTING mode, find EXIT on the menu and press the set button. 15 WIRELESS ENG / EFP SYSTEM Handheld microphone 1. Press and hold both and power buttons simultaneously to turn the microphone on. 2. Setting mode will be entered successfully for custom adjustments. 3. Press or button to scroll options. See setting menu below. Quality Talk mode RF power Mic gain Exit This refers to sound quality of the receiver. HQ: Higher Q (default): Regular Note: Only HQ is available in 902~928MHz. PTB (default): Push to bolt PTT: Push to talk PTM: Push to mute Power definition will vary upon countries. Hi: Operation range will be greater. Lo (default): Operation range will be shorter. 1~16 dB (Default: 8 dB)
-
4. Press the power button again to confirm the selection and leave the setting. 5. To leave the SETTING mode, find EXIT on the menu and press the power button. 16 WIRELESS ENG / EFP SYSTEM Back to default Dual-Antenna Receiver 1. When device is off, press and hold , and power buttons altogether to turn the receiver, transmitter or microphone on. 2. Device will be back to default settings automatically. 3. Followings list default settings of all Receiver models. Squelch: Low Channel: 01 Quality: Q Output level: Line Channel output: A+B Receiver mode: Dual Rx Bodypack Transmitter Channel: 01 Quality: Q RF power: Low Mic gain: 8 Handheld microphone Channel: 01 Quality: Q Talk mode: PTB RF power: Low Mic gain: 8 17 WIRELESS ENG / EFP SYSTEM Troubleshooting Not ready 18 WIRELESS ENG / EFP SYSTEM Specification Not ready 19