all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual | Users Manual | 1.16 MiB | September 05 2007 | |||
1 | Cover Letter(s) | September 05 2007 | ||||||
1 | External Photos | September 05 2007 | ||||||
1 | ID Label/Location Info | September 05 2007 | ||||||
1 | Internal Photos | September 05 2007 | ||||||
1 | Cover Letter(s) | September 05 2007 | ||||||
1 | Test Setup Photos | September 05 2007 | ||||||
1 | Test Report | September 05 2007 |
1 | Manual | Users Manual | 1.16 MiB | September 05 2007 |
Table Of Contents Owners Guide Arming the System ....................... 3 Disarming the System ................. 4 Emergency Override .................... 4 System Armed & Activated ........... 5 Panic ............................................ 5 Sensor By-Pass ............................ 5 Auxiliary Channel ......................... 6 3rd Channel .................................. 6 Remote Controlled Anti-Carjack ... 6 Anti-Carjacking ............................. 7 Valet Mode ................................... 8 LED Status Indicator .................... 8 Auxiliary Sensor & Prewarn .......... 9 Installation Instructions How To Program Remote Control ............. 9 How To Program Features ...................... 10 Programmable Features .................. 10 - 12 Wiring Diagram ....................................... 13 Door Lock/Unlocking Systems ................ 14 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions, (1) This device may not cause harmful interference and, (2) This device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. Remote Control Quick Reference Guide Arming: Press & Release the Lock button THE SIREN WILL CHIRP ONCE THE PARKING LIGHTS WILL FLASH ONCE THE DOORS WILL LOCK
(IF CONNECTED) Silent Arming: Press & Release the Small button Twice in 3 sec. 2 X THE PARKING LIGHTS WILL FLASH ONCE THE DOORS WILL LOCK
(IF CONNECTED) Disarming: Press & Release the Unlock button THE SIREN WILL CHIRP TWICE THE PARKING LIGHTS WILL FLASH TWICE THE DOORS WILL UNLOCK
(IF CONNECTED) Silent Disarming: Press & Release the Small button Twice in 3 sec 2 X THE PARKING LIGHTS WILL FLASH TWICE THE DOORS WILL UNLOCK
(IF CONNECTED) Page 1 Emergency Override:
THEN WITHIN 10 SECONDS PRESS & RELEASE VALET BUTTON Panic: Press & Hold the Lock Button for 3 Secs, with the ignition Off Hold 3 seconds THE SIREN WILL SOUND THE PARKING LIGHTS WILL FLASH Shock Sensor & Prewarn Bypass:
1) Arm the alarm by, Pressing & Releasing the Lock button 2) Within 2 seconds Press & Release the small button. 1. 2. Then To Activate the Auxiliary Channel: Press & Hold The Small Button for 3 Seconds Operate Remote Start Unit Operate Window Roll-Up Unit Open Electric Trunk Hold 3 seconds To Activate the 3rd Channel: Press & Hold The Small Button Hold 3 seconds Operate Remote Start Unit for 3 Seconds Operate Window Roll-Up Unit To Activate Remote Anti-Carjack: (programmable feature # 10) Press & Hold the Small button, for 3 Secs, with the ignition On Hold 3 seconds Page 2 The system may be "Armed" by any of 3 methods:
Arming the Alarm 1) Remote Control Arming: Press & Release the Lock button THE SIREN WILL CHIRP ONCE THE PARKING LIGHTS WILL FLASH ONCE THE DOORS WILL LOCK
(IF CONNECTED) 2) SILENT Remote Control Arming: Press & Release the Small button Twice within 3 seconds 2 X THE PARKING LIGHTS WILL FLASH ONCE Upon Arming: The siren will chirp one time. (3 times if there is open zone) THE DOORS WILL LOCK
(IF CONNECTED) The parking lights will flash once. The doors will lock. (If an optional interface is connected) The starter interrupt will engage. The LED Status Indicator will begin to flash slowly.
- If a zone is open, (for example a car door), when arming, the alarm will still arm, but will bypass the open zone until the zone is secured (siren will chirp 3 times). 3) To Passively Arm: Turn Ignition Off, Then Close all Doors. Automatic Last Door Arming is a programmable feature which allows the alarm to arm itself and, if desired, lock the doors upon arming. If on, anytime the ignition is turned off, and then a door is opened and closed:
The Siren will chirp once to confirm arming countdown has begun. The LED Status Indicator will begin to flash rapidly. Thirty seconds later:
The siren will chirp & the lights will flash once. The LED Status Indicator will begin to flash slowly. The starter interrupt will engage.
- The alarm is now fully armed. The doors will lock at this time, if programmed to do so, and if the vehicle is equipped.
- The system can not Last Door Arm if a protected zone is open. Should a ve-
hicle door be opened during the arming countdown, the countdown will stop and start over again when the door is closed. AUTO REARM (programmable) allows the Alarm to Rearm itself, if it is Disarmed and a vehicle door is not opened. Page 3 Disarming the Alarm The system may be "Disarmed" by any of 3 methods:
1) Remote Control Disarming: Press & Release the Unlock button THE SIREN WILL CHIRP TWICE THE PARKING LIGHTS WILL FLASH TWICE THE DOORS WILL UNLOCK
(IF CONNECTED) 2) SILENT Remote Control Disarming: Press & Release the Small button Twice within 3 sec 2 X THE PARKING LIGHTS WILL FLASH TWICE THE DOORS WILL UNLOCK
(IF CONNECTED) Upon Disarm: The siren will chirp twice. (4 chirps if alarm has activated & reset) The parking lights will flash twice. (4 times if alarm has activated) The doors will unlock. (If an optional interface is connected) The starter interrupt will disengage. The LED Status Indicator begins flashing rapidly for Automatic Rearming, until alarm Rearms or a vehicle door is opened. 2-STAGE DISARM: If Disarming the alarm while it is triggered (siren sounding), the first press of any remote control button will only silence the siren/horn. A second press of the Unlock button will Disarm the alarm. IMMOBILIZER MODE: If this mode is programmed On, the starter interrupt will remain engaged after the alarm is Disarmed, until the ignition is turned On and you Press & Release the Valet button. (Refer to programmable feature # 5) To Start Vehicle: . 1. Disarm the alarm, then Turn On the vehicles ignition 2. Press & Release the Valet Button. Emergency Override Step 1: With the system in the armed condition, enter the vehicle via the driver's door (be aware that the alarm will trigger when the door is opened). Step 2: Using your key, turn the vehicles ignition to the "On" position. Step 3: Within 10 seconds, Press & Release the Valet/ Override Switch. THEN WITHIN 10 SECONDS Page 4 System Armed & Activated Regardless of method used to Arm the alarm, once Armed, the alarm will monitor all protected zones, and if an intrusion attempt is detected it will activate, or trigger. A trigger consists of the following:
The electronic siren, or optionally the vehicles horn, will start sounding. The exterior parking lights will flash on and off repeatedly. An activation has a 30 second duration unless the system is disarmed using the remote control or the Valet /Override switch. If all protected zones are secure at the end of the trigger, the system will stop and rearm itself to detect further entry attempts. If a protected zone is still open at the end of the trigger cycle, the alarm will continue to re-trigger itself for up to six activated cycles before it resets itself and ignores the violated zone. Remote Panic Operation Should it be needed in a threatening situation, or you feel the need to attract attention, the alarm can be triggered using the remote control. Your alarm fea-
tures Panic Mode, which allows you to activate Panic from the Arm/Lock button. To Activate Remote Panic: Press & Hold the Arm/Lock Button, for 3 seconds, with the ignition Off. Hold 3 seconds THE SIREN WILL SOUND THE PARKING LIGHTS WILL FLASH Sensor By-pass The shock sensor & Prewarn zone can be by-passed using the remote control. This may be useful in stormy weather. 1) Arm the alarm by, Pressing & Releasing the Lock button. 2) Within 2 seconds, Press & Release the Small button. 1. 2. Then
- The siren will chirp once to confirm sensor has been by-passed.
- Upon Disarming the alarm, the sensor zone will reset. Page 5 The Auxiliary Channel The Auxiliary Channel may be used to operate an optional function. Possibili-
ties include remote trunk release, remote car starting, or an on-demand re-
mote window roll-up interface. Please see your Omega dealer for details on available options. To Activate the Auxiliary Channel:
Press & Hold the Small Button for 3 Seconds. Opperate Remote Start Unit Opperate Window Roll-
Up Unit Open Electric Trunk Hold 3 seconds
- The alarm will Disarm upon activating the Auxiliary channel.
- The Auxiliary Channel cannot be activated if the vehicle's ignition is "On". The 3rd Channel Auxiliary Output The programmable 3rd Channel may be used to operate an optional function, such as a remote start unit or an on-demand remote window roll-up interface. Please see your Omega dealer for details on available options. To Activate the 3rd Channel:
Press & Hold the Small button for 3 Seconds. Hold 3 seconds Opperate Remote Start Unit Opperate Window Roll-
Up Unit
- The 3rd Channel can be programmed to Supply a (-) output when the alarm is Armed to operate a Window Roll-Up module (Programmable feature # 12). Remote Anti-Carjack The Anti-Carjacking mode can be activated using the remote control.
- Refer to next page for sequence details. (programmable feature # 10) To Activate Remote Anti-Carjack:
Press & Hold The Small Button, For 3 Seconds, With The Ignition On. Hold 3 seconds Page 6 Programmable Anti-Carjacking Protection The Anti-Carjacking sequence may be activated by any of 3 methods:
1) Using the remote control, by holding down the Small Button for 3 seconds while the ignition is On. (programmable feature # 10) 2) When a door is Opened while the ignition is On (programmable feature # 10) 3) Every time the ignition is turned On. (Programmable feature # 9) 1) Anti-Carjacking activated using the transmitter: (programmable feature #10) The Anti Car-Jacking operation may be activated by pressing and holding the remote controls Small button for 3 seconds while the ignition is On. 2) Anti-Carjacking activated by an Open door: (programmable feature #10) If programmable feature #10 is On, the system will initiate the Anti-Carjacking sequence every time a vehicle door is opened while the ignition is On. 3) Anti-Carjacking activated by the ignition: (programmable feature #9) If programmable feature #9 is On, the system will initiate the Anti-Carjacking sequence every time the vehicles ignition is turned On. IMMOBILIZER MODE: If the Immobilizer mode is programmed On, the ignition activated anti-carjacking sequence will be cancelled and the Immobilizer mode disarmed by: first turning On the vehicles ignition, then Pressing &
Releasing the valet button. (Refer to programmable feature # 5) Once the Anti-Carjacking sequence has begun, the user has 59 seconds to press the Valet/Override Switch in order to cancel the sequence. ORDER OF ANTI-CARJACKING SEQUENCE:
- For first 20 seconds after the sequence has begun there are no signs.
- From 21-30 seconds, the LED will blink slowly.
- From 31-45 seconds, the LED will blink fast and the siren/horn will chirp once every 2 seconds.
- From 46-60 seconds, the LED will blink fast and the siren/horn will chirp once per second.
- If not cancelled yet, at 61 seconds the alarm will trigger. In the triggered condition:
- The siren/horn will sound & The parking lights will flash.
- The starter interrupt will engage. NOTE: Once the Anti-Carjack mode is triggered, the remote control will NOT stop the operation, nor will the system reset automatically. Once it is trig-
gered, the Anti-Carjacking operation can only be deactivated by:
1) Turning the vehicles ignition Off. 2) Turning the vehicles ignition back On. 3) Within 10 seconds, Press & Release the Valet button. Page 7 Valet Mode Valet Mode can only be entered into while the alarm is Disarmed. Valet Mode turns off all of the alarms security features, (including Anti-Carjack). Valet Mode is designed for situations in which it is not convenient for the security portion of the alarm to be operational; for example during extended stopovers for vehicle servicing, loaning others your vehicle, maintenance, valet parking, washing, etc. The convenience features such as keyless entry will still operate. To Enter Valet Mode (Alarm MUST be Disarmed):
Press & Hold the Valet Switch for 3 Seconds.
- The LED Status Indicator will light solid Red and the siren will emit a long chirp to confirm entry into Valet Mode. Now the system cannot become Armed.
- The vehicle's ignition may be "On" or "Off" when entering Valet Mode.
- To remind you its in Valet Mode ,The siren will chirp every time the vehicles ignition is turned Off To Exit Valet Mode: Simply Press & Release the Valet Switch.
- The LED will turn off and the siren will emit a long chirp to confirm that the system has exited Valet Mode. Normal arming operations may be resumed.
- The vehicle's ignition may be "On" or "Off" when exiting Valet Mode. The LED Status Indicator The Red LED Status Indicator visually shows the status of the alarm and also provides a high level of visual deterrence. The Red LED Status Indicator Light is normally mounted where it can be seen by the driver, as well as from outside. Security System Status: The primary function of the Red LED Status Indicator Light is to indicate the normal operating status of the security system:
Off = The system is disarmed and not performing any automatic functions. On Constant = The system is in the Valet Mode. Flashing Slow = The system is fully Armed. Flashing Fast (while Disarmed) = Last Door Arming or Automatic Rearming. Zone Violation: Once alarm is Disarmed, LED will show which zone triggered alarm until the ignition is turned On (this clears units memory). 2 flash & pause = Pin-Switch zone triggered alarm. 3 flash & pause = Door zone triggered alarm. 4 flash & pause = Sensor zone triggered alarm. Automatic Transmitter Verification: For the first 90 seconds after the vehicles ignition is turned "On", the LED Status Indicator will flash a number of times equal to the number of remote control transmitters which are programmed to operate the alarm. This indication can be from 1 Flash /pause up to 4 Flashes /pause, as the system can be operated by just one, or as many as 4 remote transmitters. Page 8 Auxiliary Sensor & Prewarning Auxiliary Sensor: This security system is equipped with a plug-in port for an optional sensor to increase the effectiveness of the system. The comprehensive line of optional sensors offered is comprised of impact sensors, glass tampering sensors, and microwave/radar sensors which can detect motion inside and outside the vehicle. Prewarning Detection: This circuit requires connection to a dual zone sensor or detection device. When the sensors prewarn zone is triggered the siren will emit a series of chirps. How to Program Remote Controls to the Alarm To program remote controls to operate the alarm:
Step 1: Turn "On" the vehicle's ignition. Step 2: Within 7 seconds press the Valet/Override Switch 5 times. The alarm will wolf the siren once to confirm entry into Remote Control Programming Mode. Step 3: Within 10 seconds, press any Button on each remote to be programmed. The siren will chirp to confirm each time a remote has been programed. If 10 seconds expire without any programming activity, or if the vehicles ignition is turned Off, the system will automatically exit Remote Control Programming Mode. The siren will emit 2 long chirps to confirm exit. NOTE: Up to 4 remote controls can be programed to operate the alarm. When-
ever a remote control, new or existing, is programmed to the alarm, all existing codes are erased for security. So all remote controls which are to operate the alarm, must be programmed in at the same time. Immobilizer Mode: Immobilizer mode must be disarmed before entering remote control programming mode. (refer to programmable feature # 5) 1. Turn On ignition 2. Press & Release the Valet/Override button, (siren will chirp twice) 3. Press valet/override button 5 times to enter remote control programming mode. ATV: The LED Status Indicator will show the number of programmed remote control transmitters for 90 seconds after the vehicles ignition is turned On. As the instructions above show, programming extra transmitters to any vehicle security system is easy; the exclusive patented ATV feature protects against someone programming their own transmitter to operate your system. Page 9 How to Program Features To access Features Programming Mode:
Step 1: Turn the vehicle's ignition "On" then "Off". Step 2: Within 7 seconds of turning the ignition "Off", press the Valet Switch 5 times. The siren will wolf once confirming entry to Features Programming Mode. Step 3: Within 10 seconds of entering Features Programming Mode, press the Valet Switch the number of times equal to the number of the feature to be programmed. The siren will repeat the feature number with chirps to confirm. Step 4: After the system acknowledges the feature to be programmed:
- press the Lock button on the remote to turn the feature ON (the siren will chirp once), or,
- press the Unlock Button to turn feature OFF (siren will chirp twice). Note: Once the feature to be programed is selected, you can toggle the feature between its settings by pressing the Lock & Unlock buttons on the remote control.
- To program more features, simply repeat Steps 3 and 4.
- If 10 seconds expire without any programming activity, or if the vehicles igni-
tion is turned On, the alarm will automatically exit Features Programming Mode. The siren will confirm exit. Programmable Features The alarm has 14 programmable features which allow it to be customized to suite many individual needs. The following pages provide a brief explanation for each feature, and notes its factory default setting.
= Default Factory Setting 1. Auto-Rearm: ( On = 1 siren chirp / Off = 2 chirps)
- Allows the Alarm to Rearm itself, if it is Disarmed and a vehicle door is not opened. 2. Last Door Arming: (On = 1 siren chirp / Off =2 chirps)
- Configures the alarm to automatically arm itself 30 seconds after the last door is closed with the ignition Off. AUTO REARM (not programmable) allows the Alarm to Rearm if a vehicle door is not opened after the alarm is disarmed. 3. Doors Lock w/ Last Door Arming: (On = 1 siren chirp /Off = 2 chirps)
- Adds the automatic locking of the vehicle's doors to the previous feature. Page 10 4. Double Pulse Unlock: ( 2 pulses = 1 siren chirp / 1 pulse = 2 chirps)
- Sets alarm to give 2 unlock pulses upon Disarm for cars that require it. 5. Immobilizer Mode: ( On = 1 siren chirp / Off = 2 chirps)
- If this mode is programmed On, the starter interrupt will remain engaged after the alarm is Disarmed, until the vehicles ignition is turned On and you Press & Release the Valet button.
- Anti-Carjack: Upon disarming the Immobilizer mode, ignition activated anti-
carjacking will be automatically cancelled, (if programmed On).
- Remote Control Programming Mode: Immobilizer mode must be disarmed before entering remote control programming mode. 6. Siren & Horn or Horn: ( Siren & Horn = 1 siren chirp / Horn = 2 chirps)
- This feature configures the alarms Brown/White Horn-Honk output wire. This wire can be configured to honk the horn in addition to the Brown wire operating the siren, or take over all of the Sirens functions SO THAT NO SIREN IS NECESSARY.
- If Siren & Horn are selected: The horn will honk in addition to siren sounding only when the door, pin-switch, or ignition zones are violated. (The horn will not honk if alarm is triggered by the sensor zone, or during confirmation chirps)
- If Only Horn is selected: The car horn will replace the siren and perform all of its functions. NOTE: Brown Siren wire will still be fully active & operational. 7. Shock Sensor False-Alarm Bypass: (On = 1 siren chirp / Off = 2 chirps)
- This feature will temporarily turn Off the shock sensor & pre-warn zone if:
a. The pre-warn is triggered 10 times while the alarm is Armed. b. The instant trigger zone is triggered 5 times while the alarm is Armed.
- The by-passed zones will be reinstated the next time the alarm is Armed. 8. Dome-Light Delay Bypass: (On = 1 siren chirp / Off = 2 chirps)
- This feature will turn Off the 3-chirp open zone warning when Arming the alarm with the remote control. This is for use in vehicles that keep the dome-light illuminated after the doors have been closed. 9. Ignition Activated Anti-Carjacking: (On = 1 siren chirp / Off = 2 chirps)
- This feature turns the alarms Ignition Anti-Carjacking feature On or Off. 10. Remote & Door Activated Anti-Carjacking: (On = 1 chirp / Off = 2 chirps)
-This feature turns both the alarms Remote Control and Open Door activated Anti-Carjacking features On or Off. Page 11 11. Dome-Light or Window Roll-Up: (Dome-Light = 1 siren chirp / Window Roll-UP = 2 chirps)
- Configures the alarms Black/White wire to operate the:
a. Dome-Light: Supply a (-) output when the alarm is Disarmed to illuminate the vehicles Dome-Light for 30 seconds through the use of a relay, or b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when the alarm is Armed to operate a Window Roll-Up module or other accessory. 12. 3rd Channel Output: (Momentary = 1 siren chirp / Window Roll-UP =
2 chirps)
- Configures the alarms Pink wire to operate an:
a. Accessory : Supply a (-) output as long as the small button on the remote control, is pressed & held while the vehicles ignition is Off, (max 30 seconds). b. Window Roll-Up or accessory: Supply a (-) output for 30 seconds when the alarm is Armed to operate a Window Roll-Up module or other accessory. 13. Ignition Door Lock/Unlock: (On = 1 siren chirp / Off = 2 chirps)
- Configures the alarm to Lock the vehicle's doors when the ignition is turned On and Unlock the vehicles doors when the ignition is turned Off. JUMPER ON SIDE OF ALARM BRAIN:
Lock Pulse Time: ( .80 seconds = Jumper In / 4 seconds = Jumper Out)
- Determines the length of the alarms door lock/unlock pulse output. 0.80 Sec 4.0 Sec Page 12 Relay Dome-
Light Trunk Release
(-) Auxiliary Output Relay Brown/White :
This wire can be configured (Programmable feature # 6), to honk the horn in addition to the Brown wire operating the siren, or take over all of the Sirens functions SO THAT NO SIREN IS NECESSARY Caf/con lista Blanca:
Este cable se puede programar (funcin #6), a sonar el claxon en conjunto al cable Caf operar la Sirena, O TOMAR TODAS LA FUNCIONES DE LA SIRENA PARAQUE NO HAGA FALTA INSTALAR SIRENA. S e n s o r O p t i o n a l Relay Car Horn /
Claxon Green - Verde = (-Lock, -Cierre) Red - Rojo = (+12 Volts) Blue - Azul = (- Unlock, - Apertura) L E D S t a t u s I n d c a t o r i Pin-Switch (-) P a g e 1 3 Pin-Switch (+) Pin-Switch (-) Siren 15 Amp+
B a t t e r y Brown/White - Caf/Blanco = (-Horn Output, Salida claxon -) Black/White - Negro/Blanco = (-Dome-Light , Salida luz de cabina-) Grey - Gris = (-Auxiliary output, Segundo canal auxiliar-) Pink - Rosado = (-3rd channel output, Tercer canal-) Orange - Naranja = (-Starter Kill, Corte -) Blue - Azul = (-Trigger Input, Disparo -) Violet - Violeta = (+Door Input, Puerta +) Green - Verde = (-Door Input, Puerta -) Yellow - Amarillo = (+Accessory, Ignicin +) Brown - Caf = (+Siren/Horn, +Sirena/Claxon) Red - Rojo = (+12 Volts, +12 Voltios) White - Blanco = (+Flashing Lights, +Luces) Black - Negro = (-Ground, -Tierra) Parking Lights / Luces 1 1 1 2 2 2 3 3 3 4 4 4 5 5 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 V a e t
l O v e r r i d e B u t t o n I M U N D A L
S S Sec 4.0 Sec 0.80 D o o r L o c k P u l s e T m e J u m p e r i Door Locking Systems / Sistemas De Cierre Negative Trigger System / Sistema Negativo:
Blue Green Doorlock Actuators
Unlock wire/ Cable de Apertura Lock wire /
Cable de cierre Unlock Lock Vehicle's Doorlock Relay Control Unit Ground Doorlock Switch Positive Trigger System / Sistema Positivo:
Doorlock Actuators Blue Green 87 87a 30 87 87a 30 F u s e
(+)12 Volts Lock Relay Unlock Relay Lock wire /
Cable de cierre Unlock wire/ Cable de Apertura Unlock Lock Vehicle's Doorlock Relay Control Unit
(+) 12 Volts Doorlock Switch 5 Wire Reversal (Rest at ground): Cambio de Polaridad:
Blue Green Driver Doorlock Switch Unlock
- Lock wire "Switch" side.
-cable de Cierre, lado del switch 87 87a 30 87 87a 30 F u s e
(+)12 Volts Lock Relay Unlock Relay Cut both Lock and Unlock wires in car
-Lock wire "Motor" side.
-cable de Cierre, lado Motor Passenger Doorlock Switch Unlock d n u o r G
- Unlock wire "Switch" side.
-cable de Apertura, lado del switch Lock
- Unlock wire "Motor" side.
-cable de Apertura, lado Motor Lock Page 14 9. Anti-Atraco A Travs De La Ignicin : (D) Si esta funcin programable esta encendida, el Anti-Atraco se activa cada vez que se enciende la ignicin del vehculo. NOTA: MODO DE INMOVILIZADOR: Si la funcin programable (# 5) esta encendida, al desactivar el modo de inmovilizador, presionando el botn Valet con la ignicin encendida, tambin se desactiva el Anti-Atraco por Ignicin. Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) 10. Anti-Atraco A Travs Del Control Remoto o Puerta ABIERTA (D) Si esta funcin esta encendida, el Anti-Atraco se activa usando el control remoto, o cada vez que se Abre una puerta cuando la ignicin esta encendida. Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) 11. Salida Para Luz De Cabina O Accesoria: (Luz De Cabina) Esta funcin permite escoger cuando se activa la salida del cable Negro/Blanco
- ILUMINA LUZ DE LA CABINA (al Desarmar la alarma): Esta funcin activa la salida (-) del cable Negro/ con lista Blanca cuando de Desarma la alarma para iluminar la luz de la cabina del vehculo por 30 segundos.
- SUBIR VENTANAS (al Armar la alarma): Esta funcin activa la salida (-) del cable Negro/ con lista Blanca por 30 segundos despus de Armar la alarma, para operar una accesoria como un modulo de subir las ventanas Luz De La Cabina = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Accesoria = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) 12. Salida Del Tercer Canal (cable Rosado): (Con Control Remoto) Esta funcin permite escoger como se activa la salida (-) del cable Rosado.
- USANDO EL CONTROL REMOTO: Esta funcin activa la salida (-) del cable Rosado cuando se presiona el botn pequeo del control remoto por 3 segundos. (salda mxima 30 segundos).
- AL ARMAR LA ALARMA: Esta funcin activa la salida (-) del cable Rosado por 30 segundos despus de Armar la alarma, para operar una accesoria como un modulo de subir las ventanas Con Control Remoto = Presione el botn del Cierre: (1 tono de Sirena/Clax) Al Armar Alarma = Presione el botn de Apertura: (2 tonos de Sirena/Clax) 13. Cierre/Apertura De Los Seguros Al Encender/Apagar La Ignicin: (A) Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) JUMPER EN EL COSTADO DEL CEREBRO DE LA ALARMA:
Pulso Para Abrir y Cerrar Los Seguros : ( .8 segundo / 4 segundos)
.8 segundo = Jumper Puesto 4 segundos = Sin Jumper Pagina 12 E 2. Armado Automtico: (A) Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) 3. Cierre De Los Seguros Elctricos Al Armarse La Alarma: (A) Cierre Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Cierre Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Clax). 4. Pulso Doble Para Abrir Los Seguros : ( 1 pulse / 2 pulsos) 2 pulsos = Presione el botn del Cierre: (1 tono de Sirena/Claxon) 1 pulso = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) 5. Modo De Inmovilizador: (D)
- Si esta funcin programable esta encendida, el corte de ignicin se mantiene activado despus del Desarme. Para poder encender el auto es necesario primero encender la ignicin del auto, entonces presionar el botn Valet. Para poder encender el auto: Desarme la alarma, y enciende la ignicin del auto. Entonces presione el botn de Valet. Modo Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Modo Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Clax) 6. Sirena y Claxon o Solo Claxon: (Sirena y Claxon) Esta funcin permite programar el cable Caf/Blanco a sonar el claxon en conjunto al cable Caf operar la Sirena, O TOMAR TODAS LA FUNCIONES DE LA SIRENA PARA QUE NO HAGA FALTA INSTALAR SIRENA.
- SIRENA Y CLAXON: Esta funcin permite que el claxon suene en adicin a la sirena cuando la alarma es disparada por la zona de las puertas, maletero, o ignicin. El claxon no suena si la alarma es disparada por la zona del sensor, ni hace tonos de confirmacin.
- SOLO CLAXON: Si la opcin de Solo Claxon se escoje, el claxon hace todas las funciones de la sirena, en caso que no hay sirena instalada. Sirena y Claxon = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Solo Claxon = Presione el botn de Apertura: (2 tonos de Sirena/Claxon) 7. Eliminacin De la Zona Del Sensor Automtica: (D)
- Esta funcin automaticamente elimina la zona del sensor si el pre-aviso se ha disparado 10 veces, o si la zona del sensor se ha disparado 5 veces. Eliminacin encendida = Presione el botn del Cierre: (1 tono de Sirena/Clax) Eliminacin apagada = Presione el botn de Apertura: (2 tonos de Sirena/C) 8. Confirmacin De Zona Abierta Al Armar Con Control Remoto: (D)
- Esta funcin elimina los 3 tonos de la sirena/claxon al Armar la alarma con el control cuando hay una puerta abierta. Esto es para autos que mantienen la luz de la cabina iluminada por despus de haber cerrado las puertas. Elimina los 3 tonos = Presione el botn del Cierre: (1 tono de Sirena/Claxon) 3 tonos activo = Presione el botn de Apertura: (2 tonos de Sirena/Clax). Pagina 11 E Programacin De Funciones La alarma tiene 14 funciones que son progrmales a travs del modo de progra-
macin. Estas funciones estn listada en las prximas paginas. Para entrar al modo de programacin de funciones:
1) Encienda y Apague la ignicin del auto. 2) Antes que pasen 7 segundos desde el momento que se apaga la ignicin, presione el botn de Valet 5 veces. La sirena emite un tono 3) Antes que pasen 10 segundos desde el momento de la entrada al modo de programacin, presione el botn de "Valet un numero de veces que corresponde al numero de la funcin por programar.
- La Sirena emite el mismo numero de tonos para confirmar cual funcin fue escogida. Por ejemplo: Para cambiar la funcin #3, presiona el botn de Valet 3 veces y la Sirena/Claxon emite 3 tonos. 4) Despus de haber escogido la funcin por programar, presione el botn del Cierre para encender la funcin o presiona el botn de Apertura para apagar la funcin. NOTA: Es posible Encender y Apagar y volver a Encender y Apagar la funcin usando los botones de Cierre y Apertura en el control remoto. 5) Para programar otra funcin, repitan las lneas #3-4.
- Para escoger otra funcin es necessario volver a presionar el botn "Valet"
el numero de veces que corresponde al numero de la funcin por programar. Ejemplo: Para programar la funcin #1, presiona el botn de Valet" una vez y la Sirena/Claxon emite 1 tono. 6) Si pasan 10 segundos sin entrada de programacin o si se enciende la ignicin del vehculo, la alarma automaticamente sale del modo de programacin. La Sirena/Claxon confirma la salida. Funciones Programables
= Significa programacin de fabrica. 1.Rearme Automtico: (A) Activado = Presione el botn del Cierre: (1 tono de Sirena/Claxon) Desactivado = Presione el botn de Apertura: (2 tonos de Sirena/Claxon)
- Permite que la alarma se Rearme automaticamente en caso que es desarma-
da, pero no se habr una puerta del auto. Pagina 10 E Zona Del Sensor y Pre-Aviso La Alarma viene preparada para un sensor de doble zona con pre-alarma. La zona del sensor vigila contra violaciones en general. Si el sensor detecta una violacin se dispara la alarma inmediatamente. Zona De Pre-Alarma: La zona de Pre-Alarma vigila contra violaciones pequeas. Si la zona de Pre-alarma detecta una violacin, la Sirena/Claxon emite una serie de tonos por 2-segundos. Programacin De Controles Remotos A La Alarma Para programar los controles remotos:
1) Enciende la ignicin del auto. 2) Antes que pasen 7 segundos, presione el botn de Valet 5 veces
- La Sirena/Claxon emite un tono confirmando la entrada al modo. 3) Antes que pasen 10 segundos, presione un botn de cada control remoto por programar:
- Se puede programar hasta 4 controles remotos.
- La Sirena/Claxon emite un tono cada vez que un control se ha programado. 4) La alarma sale del modo de programacin al Apagar la ignicin o si pasan 10 segundos sin entrada de programacin.
- La Sirena/Claxon confirma la salida del modo con 2 tonos largos. NOTA: Se pueden programar 4 controles para operar la alarma. Cada vez que un control se programa, todos los controles en la memoria se borran para su seguridad. Es necessario programar todos los controles de una vez. MODO DE INMOVILIZADOR: Si esta funcin programable (# 5) esta encendi-
da, es necesario desactivar el modo de inmovilizador antes de entrar al modo de programacin de controles remotos. 1. Enciende la ignicin del vehculo. 2. Antes que pasen 10 segundos, presione el botn de Valet para desactivar el modo de Inmovilizador, entonces 3. Presione el botn de Valet 5 veces para entrar al modo de programacin. PROTECCIN ATV: Por los primeros 90 segundos despus de que se encienda la ignicin del auto la luz LED hace una serie de intermitencias, separada por una pausa, que corresponden al numero de controles remotos que estn programado en la memoria de la alarma. 1 intermitencia /pausa = 1 control remoto programado. 2 intermitencias /pausa = 2 controles remotos programado. 3 intermitencias /pausa = 3 controles remotos programado. 4 intermitencias /pausa = 4 controles remotos programado. Pagina 9 E Modo de Valet Solo se puede entrar al modo de Valet cuando la alarma esta Desarmada:
En el modo de Valet todas las funciones de seguridad quedan apagadas y solamente las funciones de conveniencia como la apertura y el cierre de los seguros elctricos funcionan. El modo de Valet esta diseado para ocasiones en el cual seria inconveniente que la alarma este operando, por ejemplo cuando el vehculo este en el mecnico. Para Entrar Al Modo De Valet: Con la alarma Desarmada, presione el botn de Valet por 3 segundos con la ignicin del vehculo encendida o apagada.
- La luz LED se enciende fijamente y la sirena emite un tono para confirmar.
- Para recordarte que la alarma esta en Valet, la sirena emite un tono cada vez que se apaga la ignicin del auto. Para Salir Del Modo De Valet: Presione el botn de Valet una vez con la ignicin del vehculo encendida o apagada.
- La luz LED se apaga y la sirena emite un tono largo para confirmar salida. La luz LED tiene 3 funciones principales:
La Luz LED 1) Muestra el Estado de la alarma:
- Intermitencia lenta = La alarma esta Armada.
- Intermitencia rpida (alarma Desarmada) = El proces de Armado/
Rearme automtico ha comenzado.
- LED Apagado = Alarma Desarmada sin Armado/Rearme automtico.
- LED Fijo = La alarma esta en el modo de Valet. 2) Verifica cuantos controles estn programado: (Proteccin ATV) Por los primeros 90 segundos despus de que se encienda la ignicin , la luz LED hace una serie de intermitencias que corresponden al numero de controles remotos que estn programado en la memoria de la alarma. 1 intermitencia /pausa = 1 control remoto programado. 2 intermitencias /pausa = 2 controles remotos programado. 3 intermitencias /pausa = 3 controles remotos programado. 4 intermitencias /pausa = 4 controles remotos programado. 3) Advierte que hubo un disparo y confirma cual zona fue violada:
Si ha habido un disparo, al Desarmar la alarma, la luz LED indica exactamente cual zona fue violada hasta que se encienda la ignicin. 2 intermitencias /pausa = La zona del Capo o Maletero fue violada. 3 intermitencias /pausa = La zona de las Puertas fue violada. 4 intermitencias /pausa = La zona del Sensor fue violada. Pagina 8E Anti- Atraco La alarma viene equipada con 3 tipos de proteccin Anti-Atraco:
1) Anti-Atraco Por Control Remoto: (Funcin Programable #10) Presione el botn Pequeo por 3 segundos, con la ignicin encen-
dida. 3 Segundos 2) Anti-Atraco a travs de la ignicin y una puerta Abierta: ( #10) Si la funcin programable # 10 esta encendida, el Anti-Atraco se activa cada vez que se Abre una puerta cuando la ignicin del vehculo esta encendida. 3) Anti-Atraco a travs de la ignicin: (Funcin Programable #9) Si la funcin programable # 9 esta encendida, el Anti-Atraco se activa cada vez que se enciende la ignicin del vehculo. MODO DE INMOVILIZADOR: Si la funcin programable (# 5) esta encendida, al desactivar el modo de inmovilizador, presionando el botn Valet con la ignicin encendida, tambin se desactiva el Anti-Atraco por Ignicin. Al comenzar la secuencia del Anti-Atraco, el usuario tiene 59 segundos para presionar el botn de Valet para cancelar el Anti-Atraco. Secuencia DEL Anti-Atraco:
- Por los primeros 20 segundos no hay advertencias.
- Entre 21-30 segundos la luz LED hace intermitencias lentas.
- Entre 31-45 segundos la luz LED hace intermitencias rapadas y la sirena emite un tono cada 2 segundos.
- Entre 46-60 segundos la luz LED hace intermitencias rapadas y la sirena emite un tono cada 1 segundo.
- Si no se ha cancelado la secuencia, a los 61 segundos se dispara el Anti-
Atraco. Para desactivar el Anti-Atraco despus de que fue disparado:
a) Apaga la ignicin del vehculo. b) Enciende la ignicin del vehculo. c) Antes que pasen 5 segundos, presione el botn de "Valet". Entre 5 segundos Presione el botn Valet Pagina 7E Canal Auxiliar El canal auxiliar se puede usar para operar una funcin optional. Por ejem-
plo, abrir el maletero elctrico, operar un modulo para arrancar el vehculo, o para subir las ventanas. Canal Auxiliar: Presione el botn Pequeo por 3 segundos. 3 Segundos OPERAR UN MODULO PARA ARRANCAR EL VEHICULO OPERAR UN MODULO PARA CERRAR LAS VENTANAS ABRIR EL MALETERO/BAUL
- Se Desarma la alarma al activar el canal Auxiliar.
- El canal auxiliar no se puede usar si la ignicin del vehculo esta encendida. Tercer Canal Auxiliar El tercer canal auxiliar se puede usar para operar una funcin optional. Por ejemplo, un modulo para arrancar el vehculo, o para subir las ventanas. Tercer Canal Auxiliar: Presione el botn Pequeo por 3 segundos. 3 Segundos OPERAR UN MODULO PARA ARRANCAR EL VEHICULO OPERAR UN MODULO PARA CERRAR LAS VENTANAS
- El tercer canal auxiliar se puede programar (#12) a suplir una salida (-) cuando esta armada la alarma para operar un modulo de subir ventanas. Anti-Atraco Por Control Remoto El sistema de Anti-Atraco se puede activar usando el control remoto.
- El Anti-Atraco esta explicado por completo en la prxima pagina. Anti-Atraco Por Control Remoto: Presione el botn Pequeo por 3 segundos, con la ignicin encendida. (funcin programable #10) 3 Segundos Pagina 6E Modo Armado De La Alarma Al entrar la alarma en el modo Armado, la Sirena/Claxon emite un tono, las luces de estacionamiento hacen una intermitencia, los seguros elctricos cierran (si estn conectados), el corte de arranque se activa, y la luz LED comienza una intermitencia lenta. En este modo, si cualquiera zona detecta una violacin la alarma se dispara. Un disparo consiste de lo siguiente:
- La Sirena/Claxon comienza a sonar para atraer atencin.
- Las luces de estacionamiento comienzan una intermitencia. CICLO DE DISPARO: El ciclo de disparo dura 30-segundos a no ser que Desarmen la alarma usando un control remoto o el botn de Valet. Si todas las zonas protegidas estn seguras al final del ciclo, la alarma se reactiva y continua vigilando contra otra violacin. Si existe una zona abierta al final del ciclo, la alarma inicia otro disparo. Despus de 6 disparos consecutivos la alarma elimina la zona abierta hasta que esa zona cierre. El resto de las zonas se mantienen completamente protegidas. Al Desarmar la alarma despus de un disparo, la Sirena/Claxon emite 4 tonos, las luces de estacio-
namiento hacen 4 intermitencias, y la luz LED indica cual zona fue violada. Pnico: Presione el botn de Cierre por 3 segundos. Pnico 3 Segundos LA SIRENA / CLAXON SUENA LAS LUCES DE ESTACIONAMIENTO HACEN INTERMITENCIAS Eliminacin Del Sensor Es posible desactivar temporalmente la zona del sensor. Todas las otras zonas se mantienen completamente protegidas. Eliminacin Del Sensor:
1) Arma la alarma, Presione el botn de Cierre una vez. 2) Antes que pasen 2 segundos, Presione el botn . 1. 2. Entonces
- La Sirena/Claxon emite un tono para confirmar la eliminacin del sensor. Pagina 5E La alarma se puede Desarmar de 3 maneras:
Desarme De La Alarma 1) Desarme usando control remoto: Presione el botn del Apertura LA SIRENA / CLAXON EMITE 2 TONOS DE CONFIRMACION LAS LUCES DE ESTACIONAMIENTO HACEN INTERMITENCIAS LOS SEGUROS ELECTRICOS ABREN
(SI ESTAN CONECTADOS) 2) Desarme Silente: Presione el botn pequeo 2 veces en 3 segundos. 2 X LAS LUCES DE ESTACIONAMIENTO HACEN INTERMITENCIAS LOS SEGUROS ELECTRICOS ABREN
(SI ESTAN CONECTADOS) Al Desarmar:
- La Sirena/Claxon emite dos tonos. / Cuatro tonos si ha sucedido un disparo.
- Las luces de estacionamiento hacen 2 intermitencias./ 4 con un Disparo.
- Los seguros elctricos abren. (Si estn conectados)
- El corte de arranque se desactiva.
- La luz LED comienza una intermitencia rpida para Rearme automtico hasta que se Rearma la alarma, o se habr una puerta del auto. DESARME SEGURO DE 2 ESCALAS: Si la alarma esta disparada, presio-
nando cualquier botn del control remoto solo silencia la sirena, es necesarios presionar el botn de Apertura una segunda vez. MODO DE INMOVILIZADOR: Si esta funcin programable (# 5) esta encendida, el corte se mantiene activado despus del Desarme. Para poder encender el auto, es necesario encender la ignicin y presionar el botn de valet.
- Al desactivar el modo de Inmovilizador, se cancela el Anti-Atraco por ignicin Para poder encender el auto: Desarme la alarma, y enciende la ignicin del auto. Entonces presione el botn de valet. Desarme De Emergencia: (Desarme sin el control remoto) Esta funcin permite Desarmar la alarma sin el uso del control remoto. Esta funcin esta diseada para ocasiones en el cual la alarma esta Armada o en pleno disparo y el control remoto esta sin batera, roto, o perdido. a) Enciende la ignicin del vehculo con la llave. b) Antes que pasen 10 segundos, presione el botn Valet
-La alarma se Desarma. Antes De 10 segundos Presione el botn Valet Pagina 4E La alarma se puede Armar de 3 maneras:
Armando La Alarma 1) Armado usando control remoto: Presione el botn de Cierre. LA SIRENA / CLAXON EMITE UN TONO DE CONFIRMACION LAS LUCES DE ESTACIONAMIENTO HACEN UNA INTERMITENCIA LOS SEGUROS ELECTRICOS CIERRAN
(SI ESTAN CONECTADOS) 2) Armado Silente: Presione el botn pequeo 2 veces en 3 segundos. 2 X LAS LUCES DE ESTACIONAMIENTO HACEN UNA INTERMITENCIA LOS SEGUROS ELECTRICOS CIERRAN
(SI ESTAN CONECTADOS) Al Armar:
- La Sirena/Claxon emite un tono. / Tres tonos si una puerta esta abierta.
- Las luces de estacionamiento hacen una intermitencia.
- Los seguros elctricos cierran. (Si estn conectados)
- El corte de arranque se activa.
- La luz LED comienza una intermitencia lenta. Nota: Si existe una zona abierta, la alarma automaticamente excluye la zona hasta que la zona se cierre, el resto de las zonas se mantienen protegidas.
- La sirena emite 3 tonos para confirmar que una zona ha sido excluida. 3) Armado y Rearme Automtico:
Esta funcin programable permite que la alarma se Arme Automaticamente.
- Al cerrar la ultima puerta despus de haber apagado la ignicin, la sirena emite un tono y la luz LED comienza una intermitencia rpida por 30 seg. Al fin de 30 segundos la alarma se Arma.
- La Sirena/Claxon emite un tono.
- Las luces de estacionamiento hacen una intermitencia.
- Los seguros elctricos cierran (si estn conectados y programados).
- El corte de arranque se activa.
- Y la luz LED comienza una intermitencia lenta para confirmar el Armado. Nota: El Armado Automtico no funciona si la ignicin esta encendida o si existe una zona abierta. Si se abre una puerta durante los 30-segundos antes del armado automtico, el proces para y comienza al cerrar la puerta. REARME (Programmable): En caso de un Desarme accidental, la alarma se Rearme automaticamente si no se ha abierto una puerta del auto. Pagina 3E Desarme De Emergencia:
antes que pasen 10 segundos Presione el botn Valet Pnico: Presione el botn de Cierre por 3 segundos. 3 Segundos LA SIRENA / CLAXON SUENA LAS LUCES DE ESTACIONAMIENTO HACEN INTERMITENCIAS Eliminacin Del Sensor:
1) Arma la alarma, Presione el botn de Cierre una vez. 2) Antes que pasen 2 segundos, Presione el botn pequeo . 1. 2. Entonces Canal Auxiliar: Presione el botn Pequeo por 3 segundos. OPERAR UN MODULO PARA CERRAR LAS VENTANAS OPERAR UN MODULO PARA ARRANCAR EL VEHICULO ABRIR EL MALETERO/BAUL 3 Segundos Tercer Canal Auxiliar: Presione el botn Pequeo por 3 segundos. 3 Segundos OPERAR UN MODULO PARA ARRANCAR EL VEHICULO OPERAR UN MODULO PARA CERRAR LAS VENTANAS Anti-Atraco Por Control Remoto: Presione el botn Pequeo por 3 segundos, con la ignicin encendida. (funcin programable #10) 3 Segundos Pagina 2E Indice Gua De Instalacin:
Programacin De Controles Remotos ... 9E Programacin De Funciones ................ 10E Funciones Programables ............ 10E - 12E Diagrama ................................................. 13 Sistemas De Cierre ................................. 14 Gua Para El Usuario Armado De La Alarma ............... 3E Desarme De La Alarma ............. 4E Desarme De Emergencia .......... 4E Modo Armado De La Alarma ..... 5E Pnico ........................................ 5E Eliminacin Del Sensor .............. 5E Canal Auxiliar ............................. 6E Tercer Canal .............................. 6E Anti-Atraco por Control Remoto ..6E Anti-Atraco ................................. 7E Modo De Valet ........................... 8E Luz LED ..................................... 8E Zona Del Sensor y Pre-Aviso ..... 9E GUIA DE REFERENCIA Armado: Presione el botn de Cierre una vez. LA SIRENA / CLAXON EMITE UN TONO DE CONFIRMACION LAS LUCES DE ESTACIONAMIENTO HACEN UNA INTERMITENCIA LOS SEGUROS ELECTRICOS CIERRAN
(SI ESTAN CONECTADOS) Armado Silente: Presione el botn pequeo 2 veces en 3 segundos. 2 X Desarme: Presione el botn de Apertura una vez. LOS SEGUROS ELECTRICOS CIERRAN
(SI ESTAN CONECTADOS) LA SIRENA / CLAXON EMITE 2 TONOS DE CONFIRMACION LOS SEGUROS ELECTRICOS ABREN
(SI ESTAN CONECTADOS) LAS LUCES DE ESTACIONAMIENTO HACEN UNA INTERMITENCIA LAS LUCES DE ESTACIONAMIENTO HACEN 2 INTERMITENCIAS Desarme Silente: Presione el botn pequeo 2 veces en 3 segundos. 2 X LAS LUCES DE ESTACIONAMIENTO HACEN 2 INTERMITENCIAS LOS SEGUROS ELECTRICOS ABREN
(SI ESTAN CONECTADOS) Pagina 1E
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-05-09 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-05-09
|
||||
1 | Applicant's complete, legal business name |
Omega Research and Development Inc
|
||||
1 | FCC Registration Number (FRN) |
0015859234
|
||||
1 | Physical Address |
981 North Burnt Hickory Road
|
||||
1 |
Douglasville, Georgia 30134
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
L2M
|
||||
1 | Equipment Product Code |
449
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** T******
|
||||
1 | Telephone Number |
770-9********
|
||||
1 | Fax Number |
770-9********
|
||||
1 |
m******@caralarm.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Keyless Entry and Security | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Electronics Testing Center, Taiwan
|
||||
1 | Name |
W****** Y******
|
||||
1 | Telephone Number |
886-3********
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
w******@etc.org.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC