1 CONFIGURATION Part names FOB LCD Charge SW Climate SW M ODEL:
GHW -H001 S/No.X*******
FCC ID:OUCGHW -H001
-001 Certification label 2 How to use Turning the power of the fob on ANT MODULE Product label Power SW Battery cover CN2 connector CN1 connector (antenna connector) Pressing the power switch for more than 0.5 seconds turn the power of the fob on (with a buzzer sound) and the fob starts transmitting a request signal to obtain vehicle information. If a response signal from the vehicle is properly received, the vehicle information will be displayed on the LCD with a buzzer sound. Start/stop charging You can remotely start/stop charging with the fob. Pressing the charge switch while vehicle information is displayed on the LCD starts transmitting the setting information.
*Pressing the power switch while vehicle information is displayed on the LCD shows the in-vehicle temperature. Once the setting is done and a response from the vehicle is properly received, a charging icon will be displayed (or disappeared for charging stop) on the LCD with a buzzer sound. Turning the the air conditioner on/off You can remotely turn the air conditioner on/off with the fob. Pressing the climate switch while vehicle information is displayed on the LCD starts transmitting the setting information.
*Pressing the power switch while vehicle information is displayed on the LCD shows the in-vehicle temperature. Once the setting is done and a response from the vehicle is properly received, a climate icon will be displayed (or disappeared for air conditioning off ) on the LCD with a buzzer sound. Turning the power of the fob off Pressing the power switch for more than 0.5 seconds turn the power of the fob off. Also no button operation for more than 30 seconds automatically turns the power off. 3 Main specifications FOB Transmission frequency 926.85 MHz Output power 50 mV/m (3m) Antenna Internal loading antenna Switches Power on/off, Charge setting, Climate setting Link state acknowledgment Buzzer and LCD Battery Lithium battery (CR2032 x 2) Operation temp. range -10 C to + 70C Dimensions 83.8 x 32 x 18.4 mm (Not incl. protrusion) Weight 35 g ANTENNA MODULE Transmission frequency 926.85 MHz Output power 50 mV/m (3m) Power supply Current consumption 1.5 mA Antenna Printed dipole antenna Operation temp. range -30 C to + 85 C Dimensions 52 x 25 x 52 mm Weight 35 g 5 V 4 After sales service For after sales service, contact :
OMRON Automotive Electronics Co. Ltd. 6368 nenjyozaka, Okusa, Komaki, Aichi 485-0802 JAPAN Tel: +81 568 78 6392 URL: http://www.oae.omron.co.jp 5 FCC WARNING Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment. This device complied with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause any interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.