FCC ID: 2A89H-ATMOS2 Atmosbox

Contents Included in this package is:

1x Atmosbox hardware player 1x Ethernet cable (internet) 1x RCA L/R cable (audio) 1x 2.1mm Power adapter (5V - 3A) Quick Start Guide 1. 2. 3. Plug the ethernet cable in the Atmosbox and connect the other end to your router, modem or switch. Plug the RCA L/R cable in the Atmosbox and connect the other end to a RCA L/R or 3.5 mm jack input on your soundsystem. Plug the the power adapter in the Atmosbox and plug the other end in an electric socket. How to use After connecting everything for the first time, the Atmosbox needs some time to download your music. During the process, the SYS and NET leds might blink. When the download is complete, playback starts automatically, and both leds should turn green. 4 To check if the Atmosbox works, you can plug in any ordinary 3,5mm audio plug (for example your headphones) in the TEST port and listen if the music is playing on the device. 5 Music plays according to a customized playlist planning. Every month, new music is added automatically. Do not power-off the Atmosbox in between worksdays. Instead, switch off the power or volume on your soundsystem. The Art of Human Curation HDMI USB INTERNET L SOUND R POWER L R 1 2 3 5 4 TEST SYS NET 1/2 Safety Guide To avoid malfunction or damage to your product please observe the following:

The Art of Human Curation Warnings & Instructions for safe use WARNING This product shall only be connected to an external power supply rated at 5V dc, and a minimum current of 600-1800mA. Any external power supply used with the product shall comply with relevant regulations and standards applicable in the country of intended use. WARNING This product should be operated in a well ventilated environment and, the product should not be covered. WARNING This product should be placed on a stable, at, non-

conductive surface in use and should not be contacted by conductive items. WARNING Do not expose it to water, moisture or place on a conductive surface whilst in operation. WARNING Do not expose it to heat from any source; the product is designed for reliable operation at normal ambient room temperatures. WARNING Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors. WARNING The product is not designed to be powered from a USB port on other connected equipment, if this is attempted it may malfunction. Operation of product Environmental Troubleshooting and Repackaging for transportation If device is not working, please contact us for evaluation. If required we will send you a new box. Please use the packaging of the new box to package the faulty box and post it to the address listed below. Operating Environment Standard 0C to +50C / 32 to 122F 0 - 70%; relative humidity, non-

condensing Contact us for larger temperature range options Application Store and forward Atmosphere audio content. Storage Conditions

-20 to +70C / -4 to 158F 0 - 70%; relative humidity, non-condensing Quick references For references about the manufacturer and product model please see stickers on the Atmosbox. Please read more about the product here:

https://kollekt.fm/products Disposal Instructions Please wrap the box and accompanied cables into couple layers of paper or air-bubble wrap and post it in a carton box to the address listed below. Request a return label by sending an email to support@kollekt.fm FFC Compliance Statement Contains FCC ID: 2ABCB-RPI4B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

ISED Compliance Statement Contains IC: 20953-RPI4B

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The grantee is not responsible for any changes or modications not expressly approved by the party responsible for compliance. Such modications could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada license-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licencecontenudans le prsentappareilestconformeaux CNRd'Innovation, Sciences et Dveloppementconomique Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes :

L'appareil ne doit pas produire de brouillage;

L'appareildoitaccepter toutbrouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. RF exposure statement This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Cetquipementestconforme l'exemption des limitesd'valuationhabituelle de la section 2.5 de la norme RSS-102. Il doittreinstall et utilis une distance minimale de 20 cm entre le radiateur et toutepartie de votre corps. For technical inquiries (problem reports, request for documentation, etc.) please contact us. Support

(+31) 20 2615268 support@kollekt.fm Return adress OnBrand B.V. Singel 542 1017 AZ Amsterdam The Netherlands 2/2

Reference No.: WTX20X12097988W Page 1 of 12 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

OnBrand B.V. Singel 542, 1017 AZ Amsterdam, Netherlands Date: 03/03/23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A89H-ATMOS2 Attestation Statements Part 2.911(d)(5)(ii) Filing To whom it may concern, OnBrand B.V. certifies that, as of the date of the filing of the application, 911Cellular is not identified on the List of Equipment and Services Covered by Section 2 of the Secure Networks Act, as an entity producing covered equipment. Sincerely, Signature:

Boudewijn Geiger CTO

OnBrand B.V. Singel 542, 1017 AZ Amsterdam, Netherlands Date: 03/03/23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A89H-ATMOS2 Confidentiality Request To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of the information accompanying this application as outlined below:

Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature:

Boudewijn Geiger CTO

OnBrand B.V. Singel 542, 1017 AZ Amsterdam, Netherlands Date: 03/03/23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A89H-ATMOS2 Declaration of Authorization To whom it may concern, I, the undersigned, hereby authorize, Jandy So, of Waltek Testing Group (Shenzhen) Co., Ltd.,

(WALTEK) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Jandy So, of Waltek Testing Group (Shenzhen) Co., Ltd., (WALTEK) on our behalf shall have the same effects as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 853(a). This authorization is valid until further written notice from the applicant. Sincerely, Signature:

Boudewijn Geiger CTO

OnBrand B.V. Singel 542, 1017 AZ Amsterdam, Netherlands Date: 03/03/23 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A89H-ATMOS2 US Agent Attestation Statement / Part 2.911(d)(7) OnBrand B.V. certifies that as of 03/03/2023, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A89H-ATMOS2. OnBrand B.V. accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of OnBrand B.V. for FCC ID: 2A89H-ATMOS2. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: OnBrand B.V. Designated Agent: FCC US Agent, LLC Company Representative: Boudewijn Geiger Designated Agent Representative: Tim Payne Signature:

Signature: