Have a question or need assistance?
Ooma has a wealth of available resources if you need assistance. Support articles. Access our comprehensive knowledge base at https://support.ooma.com/office User manuals. Access this guide and all other product manuals at https://support.ooma.com/office/manuals/
Speak with a support specialist 24/7 at 1-866-939-6662 (US) or 1-877-948-6662 (Canada) AirDial Quick Start Guide 525 Almanor Avenue, Suite 200 Sunnyvale, CA 94085 Learn more at www.ooma.com or call 1-866-939-6662 (US) or 1-877-948-6662 (Canada) This device is intended for commercial use only, do not use this device inside a residence This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 2021 Ooma, Inc. All rights reserved. Patent Pending. Ooma, Ooma Telo, Ooma Connect 4G Adapter, Ooma Premier, Ooma HD3 Handset, Ooma Linx, Ooma Home Security, and the Ooma logo are trademarks or service marks of Ooma, Inc. Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Ooma assumes no responsibility with regard to the performance or use of these products. P/N: 000-0000-000 Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Account Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connect AirDial to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installation or Mounting Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Monitoring and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Device Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Appendix I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Appendix II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2 3 Package Contents Account Activation Two External Detachable LTE Antennas Mounting Screws and Anchors Otherwise, you will need to add your AirDial to your Ooma account by visiting http://rdm.ooma.com/. If the packaging of your AirDial says it is already activated, then you may skip the activation step. You should have received an email containing your account number, the devices serial number, and the phone number of your pre-activated AirDial when the device shipped. If you are a new Ooma customer, choose Create Account. If you already have an Ooma account, choose Add Device. The activation code can be found on the FCC label on the bottom of the device. Once you have activated the device, you may continue to the next step. Ooma AirDial 4x Phone Wires Power Adapter 4 Mounting Bracket Ethernet Cable (CAT5) Power Adapter Cable 5 Ooma AirDial ooma.com Made in China 9-33 VDC 3 A MODEL: OOMA AIRDIAL FCC ID: XFT-AIRDIAL IC: 9769A-AIRDIAL Contains FCC ID: XMR202008EG95NAXD Contains IC ID: 10224A-021EG95NAXD Contains FCC ID: X8WBM833 Contains IC ID: 4100A-BM833 QR Placeholder Activation Code 25ED12A IMEI: XXXXXXXXXXXXXXXX SN: XXXXXXXXXXXX PN: XXX-XXXX-XXX REV:XXX FCC label is attached to the bottom of the AirDial 1 2 3 4 WAN LAN Assembly 1. Connect the two included LTE antennas to the back of the AirDial device A . Screw the swivel nuts clockwise until they are finger tight and are holding the antenna in a steady upright position. Do not over-tighten. NOTE: The swivel nut on the antenna cannot be separated from the rest of the antenna assembly. 2. Attach the included AC power adapter to the USB AirDial unit B and plug the other end into a wall. The power adapter has a snapping connector to POWER prevent accidental disconnects. To remove it from the AirDial unit, squeeze the connector from the top and bottom and gently pull it out. 3. Turn the power switch to the ON position C . 1 2 3 4 WAN LAN USB POWER A B GPS ON/OFF GPS C OFF/ON Connect AirDial to the Internet When your AirDial starts up for the first time, it will download and install updates. This process can take up to five minutes, during which time the LCD panel might go blank. When the AirDial is powered on and ready for use, its status will change to IN-SERVICE. You can connect the four ports labeled 1-4 on the back of the AirDial to up to four devices that require POTS replacement (e.g., dialers, alarms, entry systems, communicators). The LCD on the front of the AirDial A shows the status of each phone line, the LTE signal strength, the batterys charge, Status of the AC adapters status, and the overall system status. A 6 7 Placement Guidelines Installation or Mounting Instructions Your AirDial must be installed in an area with suitable LTE cellular coverage. To test the level of coverage, you can check the signal strength indicator bars on the AirDial units LCD display. If the indicator shows two bars or fewer, try moving the AirDial to a different location. The AirDial includes a built-in battery that powers the unit if the power is disconnected. You can use the battery to move your AirDial between locations to identify a spot with ideal signal strength. The AirDial comes with four phone cables that can be used to connect it to an alarm, dialer, patch panel, or other telephony equipment. If the AirDial is installed in a location that is more than six feet from the equipment for which it will provide POTS replacement service, then you will need a longer phone cable to connect it to your equipment. You can purchase longer phone cables from a local hardware store, or you can order a 50 ft phone wire from ooma.com. LTE PLACEMENT ADVISORY The AirDial and the included antennas should only be installed indoors or in an enclosed environment away from moisture and high heat. For the best LTE signal, here are some dos and donts:
Do place the adapter in an area with good cellular Dont install the adapter in a basement reception like a room with a window Dont install the adapter near large concrete, sheet Do install the adapter on the highest possible floor metal, or steel slabs Do double check the devices LTE signal prior to cabinet or large volumes of wire mesh Dont install the adapter near an electrical cabling of your building installation Dont install the adapter near any plumbing 8 9 The AirDial device can sit flat on a horizontal surface like a desk or shelf, or it can be mounted vertically on a wall. To mount the device on a wall, attach the included mounting bracket A to the wall. If necessary, use the included plastic wall anchors. Align the AirDial with the mounting bracket and then slide it down slightly to lock it into place B . The cables should hang beneath the device. Slide AirDial down slightly to lock into mounting bracket B Underside of AirDial A Monitoring and Configuration Quick Reference Guide The AirDial can be monitored and configured remotely from any web browser. To configure a device, visit http://rdm.ooma.com Log in with your Ooma username and password. You will see a list of devices associated with your account. For additional information about adding devices and .Visit <the QSG for portal URL>
1 2 3 4 WAN LAN USB POWER GPS OFF/ON Phone 1 Phone 3 Ethernet WAN USB Reserved GPS Reserved Phone 2 Phone 4 Power Off/On Ethernet LAN Reserved Phone 1-4: Connect to your telephony device using Power: Use the provided AC adapter to connect to a an RJ11 wire power outlet Ethernet WAN: Use an Ethernet cable to connect to Off/On: Toggle the power on and on a router or switchs LAN port, or to connect directly to a modem 10 11 Optional Accessories Troubleshooting Replacement battery If your battery becomes depleted, you can purchase and install a replacement. Visit ooma.com or contact a customer support representative to learn more and buy now. Extended phone cable If the included phone cable isnt long enough to reach your telephony device at the installation site, you can purchase a longer cable. Visit ooma.com to order a 50-foot cable direct from Ooma, or head to your local hardware store to view their selection of phone cables. Coax extension cables for antennas You can extend the range of your antennas by connecting them to SMA coax extension cables. If youd like to do this, visit your local hardware store or your favorite online retailer to explore their selection. The quality of your signal depends on the cables length and impedance. Ooma recommends that coax extension cables be no longer than 10 feet and have low impedance. Be sure to purchase a cable with a male connector on one end and a female connector on the other. 12 13 Battery Replacement Device Specifications Should your batter become depleted, you can purchase and install a new one. To replace the old battery pack:
1. Open the door on the right side of the device. 2. Remove the screw that holds the battery cover in place. 3. Disconnect the battery from the white electrical connector:
Depress the top locking tab. Hold the wires firmly to secure them as you disconnect the connector. If disconnecting the battery is difficult, carefully move the wires back and forth within 15 degrees of the connection point. 4. Remove the old battery. 5. Insert the new battery. 6. Connect the battery cable to the in the white electrical connector by inserting the socket straight into the header with the locking tab up until it clicks. 7. Reinsert the battery cover, secure it with the screw removed in Step 2, and close the access door. Processor Modem LTE Band Support LTE Data Rates Antennas SIM Cards Ethernet FXS Ports Telephony Power Adapter Power Input Power Output Battery Backup Display Switches Dimensions Dual-core ARM Cortex A9 CPU Quectel EG95-NAXD Cat-4 LTE B2/B4/B5/B12/B13/B25/B26 Up to 150 Mbps down and 50 Mbps up Two Wideband 5G/4G Terminal Mount Antennas Hinged 90 termination with SMA(M) Connector Dual micro-SIM support One RJ-45 10/100/1000 Ethernet WAN port One RJ-45 10/100/1000 Ethernet LAN port Four RJ-11 analog FXS ports 55Vrms Low Power Ringing AC-DC Adapter w/ MicroFit+ connector 100-240 VAC 50-60Hz 12VDC/3A 36W Replaceable battery pack 3S3P Li-ion battery: 10.95V, 3A Capacity 85.4 Wh (7.8 Ah) provides > 8 hours of standby time 320x240 LCD display Master On/Off Factory reset (recessed) W 30cm x H 6cm x D 20cm when sitting horizontally BATTERY WARNING: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat, or incinerate. Replace battery with Ooma authorized replacement pack only. Use of another battery may present a risk of fire or explosion. Dispose of battery properly. Keep away from children. Do not disassemble and do not dispose of in fire. Operating Temperature 0 40 C Warranty 1-Year Limited Warranty 14 15 Support Appendix I Need help? Ooma has a wealth of available resources to help if you need assistance. Support Articles and User Manuals. Access our comprehensive knowledge base at https://support.ooma.com Live Customer Care. Speak with a support specialist 24/7 at 1-866-939-6662 (US) Connecting AirDial to an emergency phone or monitoring system dialer AirDial 1 2 3 4 WAN LAN USB POWER GPS OFF/ON Phone wires with RJ11 jack 16 Telephone Entry System Automatic dialers for alarms and monitoring systems Emergency Elevator, parking, and ATM phones Emergency pool phones 17 Appendix II Connecting AirDial to Digital Alarm Communication Transmitter (DACT) AirDial 1 2 3 4 WAN LAN USB POWER GPS OFF/ON Phone wire with RJ11 jack Ethernet wire with RJ45 connector RJ45 to RJ11 adapter Fire alarm 411 digital communication transmitter 18 19 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 1. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference,
(2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICE-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada. L'appareil a t valu pour rpondre aux exigences gnrales d'exposition RF. L'appareil peut tre utilis dans des conditions d'exposition fixes / mobiles. La distance de sparation minimale est de 20 cm.