FCC ID: 2APYG-OPSWT-1806 wifi module

FCC Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. External Wi-Fi Module Quick User Manual for the external Wi-Fi module 1. Wi-Fi module is designed for wireless transmitting of the analog signal to the Smartphone with appointed installed software. 2. Two cables for the analog signal connection are included. a) Cable for the connection of the Wi-Fi module to the devices with BINDER connecter. b) Cable for the connection of the Wi-Fi module to the devices with RCA connecter. 3. Operation with the module:

a) Connect the Wi-Fi module to the device where you want to transmit the signal with the help of the cable. b) Turn on the Wi-Fi module, pressing the button that is situated on the housing of the module the red light emitting diode should light up, in 3-4 second it should become green. c) Provide the connection to the Smartphone with the help of information below. d) After finishing the operation, turn off the module, pressing the button on the housing of the device, the light emitting diode should turn off. e) The light emitting diode will be pulsing during the charging. f) To charge the module you need to connect it to the standard Smartphone charger via standard cable (micro USB- USB); the red light emitting diode should light up near the button. If the battery charged, the light emitting diode will turn off. Technical specifications l. Transmitting Frequency - 2400MHz-2483.5MHz 2. Video Resolution - VGA 640*480, 30fps 3. Video Compression - H.264 4. Range 30m 5. Interface micro USB 6. Battery type - LI-ION, BL-6Q, 970mAh, 3.7V 7. Operation time- up 4 hours Operations for Android system client Installation of the APP software:

1. Turn on the intelligent device and enter GOOGLE PLAY store. 2. Search WIFI AVIN software, and download. 3. Install the APP software, as the following interface:

WIFI Connection:

1. Power on WiFi on the scope 2. Open your devices WiFi setting and locate the WIFI AVIN Wifi. 3. Connect to WIFI AVIN (Default password: 12345678). View the video:

Open the app

, if the connection between the wifi module and the intelligent mobile device terminal is successful, the icon will be highlighted, and you will be able to see the camera view as shown. Notice When the background is black or the image is still, please exit the app, and check whether the wifi connection is normal. Then click again the app icon to enter into the software interface. Settings:

Press this icon to enter into the settings menu. You can change the default factory SSID and password of the WiFi module, and clicking new SSID set. will show whether the change is successful, and clicking to cancel the Notice User could press the RESET button of the transmitter to renew the default factory SSID and password. Operations for iOS Apple system client Installation of the APP software:

1. Turn on the intelligent device and enter Apple APP store. 2. Search WIFI AVIN software, and download. 3. Install the APP software, as the following interface:

WIFI Connection:

1. Power on WiFi module(Voltage 3.7V-5V), WiFi led turn yellow. 2. Open your devices WiFi setting and locate the WIFI AVIN Wifi. 4. Connect to WIFI AVIN (Default password: 12345678). View the video:

Open the app successful, you will be able to see the camera view as shown.

, if the connection between the WiFi module and the intelligent mobile device terminal is With unique image zoom in, zoom out function. Notice When the background is black or the image is still, please exit the app, and check whether the wifi connection is normal. Then click again the app icon to enter into the software interface. Settings:

Press this icon WiFi mdoule, and clicking new SSID set. to enter into the settings menu. You can change the default factory SSID and password of to cancel the will show whether the change is successful, and clicking

Label Labellocation 25*45mm Model:SpheraWifiTransmitter

FCCID:2APYG-OPSWT-1806

RF_160, Issue 03 OOO PP SPHERA 25, DALNITSKAYA STR, ODESSA, UKRAINE Lisa Wang (1) EMTEK (SHENZHEN) CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen China ODESSA UKRAINE Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Name Representative of agent:

Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description: wifi module Type designation: Sphera Wifi Transmitter Trademark:

FCC ID: 2APYG-OPSWT-1806 on our behalf. Date:

City:

Name:

Function:

Deputy Director Semen Barsky 201806-11 ODESSA SPHERA Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

OOO PP SPHERA Date: 2018-06-11 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2APYG-OPSWT-1806 To Whom It May Concern:

This letter is to ascertain that OOO PP SPHERA MODEL No.: Sphera Wifi Transmitter has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Clients name / title: Semen Barsky/ Deputy Director E-mail: info@sphera.org.ua Phone: +380487770214 Fax: +380487770214 Address: 25, DALNITSKAYA STR, ODESSA, UKRAINE

FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name: OOO PP SPHERA Address:

City:

Country:

25, DALNITSKAYA STR, ODESSA, UKRAINE ODESSA UKRAINE Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: 2APYG-OPSWT-1806 Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC: (notes 2, 3, 4, 5) Name and signature of applicant:

Date: 2018-06-11 Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period