OPN-2006 Specifications Manual This manual provides specifications for the OPN-
2006 ultra compact data collector. OPN-2006 Specifications Manual All information subject to change without notice. Document History Model Number:
Edition:
Date:
OPN-2006 1.0 2014-02-16 Specification Number:
Original Spec Number:
P1402160
Copyright 2014 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-
446-1184 SUPPORT USA Phone: 800-636-0090 Email: support@opticonusa.com Web: www.opticonusa.com Europe Email: support@opticon.com Web: www.opticon.com 2 OPN-2006 Specifications Manual Revision History Specification No. Product name
: P1402160
: OPN-2006 Edition First Date 2014/02/16 Page
Section
Description of Changes Initial release 3 OPN-2005 Specifications Manual Contents 1. Abstract ................................................................................................................................. 6 2. Overview ............................................................................................................................... 6 2.1. Product / Model Name ..................................................................................................... 6 2.2. Features .......................................................................................................................... 6 3. Basic Specifications ............................................................................................................. 7 4. Detailed View ........................................................................................................................ 8 5. Optical Specifications .......................................................................................................... 9 5.1. Laser Scanning Specifications ......................................................................................... 9 5.2. Laser Scanning Standards ............................................................................................... 9 5.2.1. Laser Scanning Tilt .................................................................................................... 9 5.2.2. Laser Scanning Curvature ......................................................................................... 9 6. Technical Specifications Barcode Scanner ...................................................................... 10 6.1. Print Contrast Signal (PCS) ........................................................................................... 10 6.2. Minimum Resolution ...................................................................................................... 10 6.3. Supported symbologies: ................................................................................................ 10 6.4. Scan Area and Depth of Field ........................................................................................ 11 6.5. Pitch, Skew, and Tilt ...................................................................................................... 12 6.6. Curvature ....................................................................................................................... 13 7. Interface Specifications ..................................................................................................... 14 7.1. USB ............................................................................................................................... 14 7.1.1. Settings ................................................................................................................... 14 7.1.2. Cable ....................................................................................................................... 14 7.1.3. Connector ................................................................................................................ 14 7.1.4. Interface Circuit ....................................................................................................... 14 7.2. Bluetooth ....................................................................................................................... 15 7.2.1 Module ..................................................................................................................... 15 7.2.2 Specifications ........................................................................................................... 15 8. Product Label ..................................................................................................................... 15 9. Packaging Specifications................................................................................................... 16 9.1. Individual Packaging Specification ................................................................................. 16 9.2. Collective Packaging Specification ................................................................................. 17 10. Durability ........................................................................................................................... 18 4 OPN-2005 Specifications Manual 10.1. Ambient Light Immunity ............................................................................................... 18 10.2. Vibration Strength (without packing) ............................................................................ 18 10.3. Vibration Strength (in individual packing) ..................................................................... 18 10.4. Drop Impact Strength (without packaging) ................................................................... 19 10.5. Electrostatic Discharge Immunity ................................................................................. 19 10.6. MTBF ........................................................................................................................... 19 11. Regulatory Compliance .................................................................................................... 20 11.1. Laser Safety ............................................................................................................... 20 11.2. EMC ........................................................................................................................... 20 12. RoHS ................................................................................................................................. 20 13. Precautions ....................................................................................................................... 21 13.1. Precaution against Laser Light ..................................................................................... 21 13.2. Handling ...................................................................................................................... 21 Appendix 1: Mechanical Drawing .......................................................................................... 22 Table of Figures Figure 1: Detailed View .............................................................................................................. 8 Figure 2: Laser Scanning Tilt and Curvature .............................................................................. 9 Figure 3: Scan Range and Depth of Field ................................................................................. 11 Figure 4: Pitch .......................................................................................................................... 12 Figure 5: Skew ......................................................................................................................... 13 Figure 6: Tilt ............................................................................................................................. 13 Figure 7: Curvature .................................................................................................................. 13 Figure 8: USB B connector ....................................................................................................... 14 Figure 9: Interface circuit .......................................................................................................... 14 Figure 10: Product & Laser Caution Label ................................................................................ 15 Figure 11: Individual Packaging .................................................. Error! Bookmark not defined. Figure 12: Collective Packaging ............................................................................................... 17 Figure 13: Drop Test ................................................................................................................ 19 Figure 14: Mechanical Drawing ................................................................................................ 22 5 OPN-2005 Specifications Manual 1. Abstract This manual provides specifications for the OPN-2006 ultra compact data collector. 2. Overview OPN-2006 has a built in compact laser scanner and scanned barcode data output occurs via USB interface or Bluetooth. This product is compliant with RoHS. 2.1. Product / Model Name OPN-2006 2.2. Features The OPN-2006 is handy and simple data collector. Its compact, lightweight design makes it easy to take anywhere. Data transmission is performed via Bluetooth or a USB interface. Power supply is 3.7V, 240 mAh and lithium-ion polymer battery is used. The OPN-2006 is charged from a USB interface of the host computer. 6 OPN-2005 Specifications Manual 3. Basic Specifications Item Specification Remarks Control Section Storage Input Section Indication LED Buzzer USB RTC (clock) Power Supply Scanner
(MSL-2001) Dimensions Weight Environmental Specifications Drop Impact Strength (*1) Regulatory Compliance 32 bit CPU 96 MHz Clock 512 Kbyte + 32 Kbyte FROM 96 Kbyte SRAM 1 Mbyte FROM Key type 2 keys: Trigger, Function 2 multicolor color LEDs (red, green, orange, blue) Volume (3 levels), Adjustable tone Mini USB ver 1.1 Supported Main battery Continuous operating time Light-emitting element Laser wavelength
/ output Scanning frequency Minimum resolution Scanning distance Symbology Year, month, date, hour, minute, second (accuracy: 90 seconds per month) Lithium polymer 240 mAh 1000 scans or more Red laser diode 650 10 nm, up to 1 mW, 25C 100 20 scan / sec 0.127mm 60 250mm JAN, EAN, UPC-A, UPC-E, NW-7 (Codabar),Industrial 2 of 5, Code 11, Code 39, Code 93, Code 128, GS1 Data Bar etc. 62.0 32.0 16.0 (DWH mm) Approx. 29 g Operating temperature/humidity Storage temperature/humidity Frequency Height Floor Laser safety:
IEC60825-1:2007 CE Marking, FCC 0 ~ 40 C 20 ~ 85 %RH
-20 ~ 60C 20 ~ 85%RH 6 faces, 3 cycles 150 cm Concrete 12 Mbps, USB-
COM/USB-HID Condition: read twice in 10 secs. at room temp. Resolution: 1.0 mm PCS 0.9 No frost, no condensation No frost, no condensation
*1 : Conditions of drop shock resistance
- Scratches or whitening on plastic surface shall not be counted as a malfunction.
- The product shall work properly after the drop test. 7 OPN-2005 Specifications Manual 4. Detailed View Figure 1: Detailed View No. Name Description 1 2 3 4 5 6 7 Scanning Window Laser light is emitted through this window to read bar codes. Mini USB connector Used to connect a dedicated USB cable for charging & data Trigger Key Function Key LED Buzzer Hole Strap Hole communication A trigger key used to read bar codes A function key that can be configured with application Indicator of operating status, such as bar code reading and warnings Sound from a built-in buzzer comes out through these holes. A hole to attach a hand strap 8 OPN-2005 Specifications Manual 5. Optical Specifications 5.1. Laser Scanning Specifications Item Light-Emitting Element Emission Wavelength Light Output Scanning Method Scanning Speed Scan Angle Scan Angle Read angle Characteristics Red laser diode 650 10 (25 C) 1.0 or less Bi-directional scanning 100 20 54 5 44 (Min) Unit
nm mW
scans/sec deg deg Notes:
Refer to Technical Specifications, to read about scanning performance. 5.2. Laser Scanning Standards 5.2.1. Laser Scanning Tilt Vertical differences between both ends of a laser scanning line:
- Up to 0.92 degrees in a vertical direction from the scan origin (scanning mirror).
- Up to 2.46 mm measured at 150 mm from the scan origin and with zero skew angle.
- Measured in the middle of the scan line. 5.2.2. Laser Scanning Curvature The maximum differences between the laser scanning line and a straight line connecting the both ends of the scanning line:
- Up to 1.17 degrees from the scan origin (scanning mirror).
- Up to 3.06 mm measured at 150 mm from the scan origin with zero skew angle.
- Measured in the middle of the scan line. Figure 2: Laser Scanning Tilt and Curvature 9 OPN-2005 Specifications Manual 6. Technical Specifications Barcode Scanner The conditions are as follows, unless otherwise specified. Conditions Ambient temperature and humidity:
Ambient light:
Background:
Decoding test:
Room temperature (20 C) Room humidity (45% to 85% RH) 500 to 900 lx Barcode = black Space = white Margin = white Background of label = black Approve the performance when decoding is successful in all ten tests. (Decoding is deemed successful when completed in 0.5 seconds or less.) 6.1. Print Contrast Signal (PCS) PSC 0.45 or higher (70% or higher reflectivity of space and quiet zone) Reflectance of white barReflectance of black bar Reflectance of white bar PCS =
6.2. Minimum Resolution 0.127 mm 6.3. Supported symbologies:
Linear (1D) JAN/UPC/EAN, incl. add-on Codabar/NW-7 Code 11 Code 39 Code 93 Code 128 GS1-128 (EAN-128) GS1 Databar (RSS) IATA Industrial 2of5 Interleaved 2of5 ISBN-ISMN-ISSN Matrix 2of5 MSI/Plessey S-Code Telepen Tri-Optic UK/Plessey Postal codes (1D) Chinese Post Korean Postal Authority Code 2D codes GS1 Composite Codes 10 OPN-2005 Specifications Manual 6.4. Scan Area and Depth of Field Figure 3: Scan Range and Depth of Field Resolution 1.0 mm 0.5 mm 0.25 mm 0.15 mm 0.127 mm Symbology Code 39 Code 39 Code 39 Code 39 Code 39 PCS 0.9 0.9 0.9 0.9 0.9 Quiet Zone No. of Digits 25 mm 18 mm 10 mm 7 mm 5 mm 1 3 8 10 4
<Conditions>
Bar Code Sample Angle Curvature
: Optoelectronics Test Chart, N/W ratio = 1:2.5
: = 0 = 15 = 0
: R =
11 OPN-2005 Specifications Manual 6.5. Pitch, Skew, and Tilt Pitch Skew Dead Zone Tilt Conditions Bar Code Sample Optoelectronics Test Sample Distance
: 35
: 50 (Excluding dead zone)
: 8 (Decoding may fail in some areas as a result of specular reflection)
: 20 110 mm from the edge of the OPN-2006
<Pitch, Skew and Dead Zone>
PCS 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1 : 2.5
<Tilt>
PCS 0.9, Resolution 0.5 mm, 3-digit Code 39, Quiet Zone 15 mm Pitch and Tilt angles calculated with Skew angle = +15 Skew angle / Dead zone: = 0, = 0 R =
Angle Curvature 25o 25o Figure 4: Pitch 12 OPN-2005 Specifications Manual 40o 40o Figure 5: Skew Figure 6: Tilt 6.6. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R 15 mm With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R 20 mm Conditions Bar Code Sample Optoelectronics Test Sample Distance Angle PCS 0.9, Resolution 0.26 mm, Quiet Zone 10 mm 110 mm from the edge of the scanner Skew angle = +15 Figure 7: Curvature 13 OPN-2005 Specifications Manual 7. Interface Specifications 7.1. USB 7.1.1. Settings The interface is full-speed USB. 7.1.2. Cable Dedicated cable with PC connector is provided. 7.1.3. Connector Figure 8: USB B connector 7.1.4. Interface Circuit Contact Number Signal Name 1 2 3 4 5 VCC
-DATA
+DATA NC GND Figure 9: Interface circuit 14 OPN-2005 Specifications Manual 7.2. Bluetooth 7.2.1 Module The OPN-2006 is equipped with a low power fully certified Bluetooth module. 7.2.2 Specifications Bluetooth standard: 3 High speed UART interface Supported profiles: SPP (serial port profile) and HID (keyboard emulation) 8. Product Label The label shown below is attached to the back of the OPN-2006. Figure 10: Product & Laser Caution Label 15 OPN-2005 Specifications Manual 9. Packaging Specifications 9.1. Individual Packaging Specification Assembled package size: 125 x 112 x 40 (WDH mm) Figure 11: Individual Packaging 16 9.2. Collective Packaging Specification OPN-2005 Specifications Manual Assembled package size: 595 x 520 x 245 (WDH mm), 100 pieces/box Figure 12: Collective Packaging 17 OPN-2005 Specifications Manual 10. Durability 10.1. Ambient Light Immunity Scanning performance is guaranteed when the barcode surface is illuminated as follows. Incandescent light : 0 ~ 4,000 lx Fluorescent light lighting) Sunlight
: 0 ~ 4,000 lx (excluding high-frequency
: 0 ~ 80,000 lx
<Conditions>
Barcode Test Sample Distance scanner. Angles Curvature Power Voltage OPTOELECTRONICS test chart PCS = 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1:2.5 100 mm from the front edge of the Pitch: = 0, Skew: = 15, Tilt: = 0 R =
3.7 V
* Be sure that direct light or specular reflection does not enter the light receiving section of the OPN-2006. 10.2. Vibration Strength (without packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the non-operating state. Repeat this in each X, Y and Z direction. 10.3. Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the individual packaged state. Repeat this in each X, Y and Z direction. 18 OPN-2005 Specifications Manual 10.4. Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 3 times (18 times in total), at each 6 face, from a height of 150 cm onto a concrete floor as shown below. 150 cm Figure 13: Drop Test 10.5. Electrostatic Discharge Immunity Air discharge:
Contact discharge:
8 kV Max. (No malfunction) 15 kV Max. (No destruction) 4 kV Max. (No malfunction) [Discharged from the frame of the USB connector.]
10 kV Max. (No destruction) Use electrostatic testing device compliant with IEC 61000-4-2 Measurement environment:
Discharge resistance:
Capacitor charging: 150 pF 330 10.6. MTBF MTBF (Mean Time Between Failures) Laser diode :
Mirror scan unit :
30,000 hours (excluding the following parts) 10,000 hours 10,000 hours 19 11. Regulatory Compliance OPN-2005 Specifications Manual 11.1. Laser Safety IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class 11.2. EMC EN55022 EN55024 FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject To the following two conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. 12. RoHS The OPN-2006 is compliant with RoHS. RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC 20 13. Precautions OPN-2005 Specifications Manual 13.1. Precaution against Laser Light
*Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Caution - Do not stare into the laser light from a scanning window. It may harm your eyes. Do not point the laser directly at others eyes. It may harm your eyes. Do not stare into the beam with optical instruments. It may harm your eyes. 13.2. Handling Handle this product carefully. Do not deliberately subject it to any of the following:
(1) Shock:
Do not drop this product from a height greater than specified in this manual. Do not place this product under or between any heavy items. Do not swing this product around holding the hand strap.
(2) Temperature Conditions:
Do not use this product at temperatures outside the specified range. Do not pour boiling water on this product. Do not throw this product into a fire.
(3) Foreign Materials:
Do not immerse this product in water or other liquid. Do not expose this product to chemicals.
(4) Battery:
(5) Others Do not disassemble this product. Do not use this product near a radio or a TV. It may cause reception problems. This product may be affected by a momentary voltage drop caused by lightning. This product may not perform properly in a place where it will be subjected to a flickering light, such as a CRT (computer monitor, television, etc.).
* This specification manual is subject to change without prior notice. 21 Appendix 1: Mechanical Drawing OPN-2005 Specifications Manual Figure 14: Mechanical Drawing 22