FCC ID: Q2Q-EE201 Opticon EE201

Electronic shelf label EE202 The EE202 is an e-paper based electronic shelf label with a screen size of 2 and with 802.15.4 based wireless communication. Specifications Manual EE202 Specifications Manual All information subject to change without notice. Document History Model Number:

Edition:

Date:

EE202 1.4 July 17, 2015 Specification Number:

Original Spec Number:

Copyright 2015 Opticon Sensors Europe BV. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your product or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-

17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Phone: 800-636-0090 Email: support@opticonusa.com Web: www.opticonusa.com Europe Phone: 023-5692792 Email: support@opticon.com Web: www.opticon.com 2 EE202 Specifications manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 6 3.1. Dimensions ....................................................................................................................... 6 3.2. Weight ............................................................................................................................... 6 4. Environmental Specifications .................................................................................................. 6 4.1. Operating Temperature and Humidity ................................................................................ 6 4.2. Storage Temperature and Humidity ................................................................................... 6 4.3. Static Electricity ................................................................................................................. 6 4.4. Drop resistance. ............................................................................................................... 6 5. Controls ..................................................................................................................................... 7 6. Electrical Specifications ........................................................................................................... 7 6.1. Electrical Characteristics ................................................................................................... 7 6.2. Battery ............................................................................................................................... 7 7. Radio Specifications ................................................................................................................ 8 7.1. Protocol ............................................................................................................................. 8 7.1.1. The physical layer ...................................................................................................................... 8 7.1.2. The medium access control layer .............................................................................................. 9 7.2. Security ............................................................................................................................. 9 8. Labeling ..................................................................................................................................... 9 8.1. Product label ..................................................................................................................... 9 8.2. Shipment box labels ........................................................................................................ 11 9. Accessories ............................................................................................................................ 12 10. Packaging Specifications ....................................................................................................... 12 10.1. Individual Packaging Specification ................................................................................... 12 10.2. Collective Packaging Specification .................................................................................. 13 11. Regulatory Compliance .......................................................................................................... 14 11.1. Product Safety ................................................................................................................. 14 11.2. EMC ................................................................................................................................ 14 11.3. WEEE.............................................................................................................................. 15 11.4. RoHS .............................................................................................................................. 15 12. Safety ....................................................................................................................................... 16 12.1. Shock .............................................................................................................................. 16 12.2. Temperature Conditions .................................................................................................. 16 12.3. Foreign Materials ............................................................................................................. 16 3 EE202 Specifications manual 12.4. Battery ............................................................................................................................. 16 12.5. Other ............................................................................................................................... 16 13. Mechanical Drawing ............................................................................................................... 17 Table of Figures Figure 1: Dimensions .................................................................................................................. 6 Figure 2: product label ................................................................................................................ 9 Figure 3: product label dimensions .............................................. Error! Bookmark not defined. Figure 4: shipment box labels ................................................................................................... 11 Figure 5: HL hinged shelftaker for data strips. .......................................................................... 12 Figure 6: Individual packaging .................................................................................................. 12 Figure 7: Collective packaging 1 ............................................................................................... 13 Figure 8: Collective packaging 2 ............................................................................................... 13 Figure 9: Mechanical drawing ................................................................................................... 17 4 EE202 Specifications manual 1. Abstract This manual provides specifications for the EE202 electronic shelf label (hereafter referred to as ESL). 2. Overview The EE202 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE 802.15.4 standard that specifies the physical layer and media access control for low-rate wireless personal area networks. A development kit is available that consists out of a base station, several EE202 tags and PC software that allows people to quickly test the system and makes it easier to integrate this ESL system into an existing back office system. 5 3. Physical Features 3.1. Dimensions W 65.7 x H 34.9 x D 13.7 mm EE202 Specifications manual Figure 1: Dimensions 3.2. Weight 40 g (including battery) 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: -20 to 50 C Humidity: 20% to 85% RH 4.2. Storage Temperature and Humidity Temperature: -25 to 60 C Humidity: 20% to 85% RH 4.3. Static Electricity Air discharge:

Contact discharge:

4.4. Drop resistance. 8 kV MAX (No malfunction) 15 kV MAX (No destruction) 4 kV MAX (No malfunction) 8 kV MAX (No destruction) There will be no sign of decreased performance after the following drop test:

Drop the ESL from 1.8 M above the concrete floor (6 sides, 3 times each). Scratches or discoloration of the casing do not decrease product performance. 6 5. Controls Items Specifications CPU LCD Type 8051 core 8-bit MCU Internal flash ROM Internal RAM Clock frequency Active area Number of dots Dot pitch Modulation 96KB 6 KB 32 MHz W 45.8 x H 22.0 mm W 200 x H 96 111 Horizontal 111 Vertical DSSS Radio Frequency 2405 - 2480 MHz Baud rate 250 Kbits / second 6. Electrical Specifications 6.1. Electrical Characteristics EE202 Specifications manual Remarks Dots per Inch Globally approved 2.4GHz band. Conditions: Operating voltage 3.0V unless otherwise specified Parameter Operating voltage Sleep current Poll time Typ 2.03.3 Unit V 1

>=20 uA seconds Remarks Lithium primary battery When the transmitter and receiver are idle See below The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals

(called the poll time) and it then transmits a poll request to the base station. When the base station has no data to send, it acknowledges the poll after which the ESL immediately goes back to sleep. The minimum poll rate is configurable and is set to 20 seconds by default. A higher poll rate will decrease the power consumption but will increase the response time. 6.2. Battery The power is supplied to the ESL by 2 CR2450 batteries:

Nominal capacity: 1200 mAh (two times 600mAh) Nominal voltage: 3.0 V. Maximum self-discharge rate: <1% per year Usable time: 7 years minimum (Update frequency: 4 times per day, poll time 20 seconds) 7 EE202 Specifications manual The operating time of the batteries is based on any of the following factors that influence the battery life:

Factor Polling for data &

reporting settings Display updates Out of range /

base station OFF %

Sleep time Battery self-discharge Default values and estimated averages Interval: 20 seconds Retransmissions: 10%

Report ratio: 1 to 39 4 updates per day Temperature: 15-25 C Not connected: 2%

Number of channels: 5 99,9%

1 % / year Correlation *

(Higher is better) Yes No Yes No No No No Yes No Influence 61%

20%

4%

9%

6%

* The correlation shows whether increasing the listed value increases or decreases the power consumption of the ESLs. For example:

Increasing the poll interval lowers the power consumption Turning off the base stations increases the power consumption A lower operating temperature increases the power consumption More display updates per day increase the power consumption 7. Radio Specifications Parameter Receiver sensitivity Nominal output power Frequency Min

-3 2405 Typ

-97 4.5 Max

-89 7 2480 Transfer rate RSSI range 250Kbit/s 100 Unit dBm dBm MHz dB Remarks Over the entire temp. and operating voltage range Over the entire temp. and operating voltage range Signal strength indication that can be reported to the base station 7.1. Protocol Modified 802.15.4 (Physical layer and Media Access Control layer). 7.1.1. The physical layer The physical layer (PHY) provides the data transmission service, as well as the interface to the physical layer management entity, which offers access to every layer management function and maintains a database of information on related personal area networks. Thus, the PHY manages the physical RF transceiver and performs channel selection and 8 EE202 Specifications manual energy and signal management functions. It operates on the above mentioned frequency band. The PHY layer is 100% compliant and is based on direct sequence spread spectrum (DSSS) technique with a transfer rate of 250 kbit/s. 7.1.2. The medium access control layer The medium access control (MAC) layer enables the transmission of MAC frames through the use of the physical channel. Besides the data service, it offers a management interface and itself manages access to the physical channel. It also controls frame validation, guarantees time slots and handles node associations. Finally, it offers hook points for secure services. The EE202 does not make use of the optional network beaconing, instead it used a polling mechanism to increase power efficiency. Some changes are made to the standard to allow for more efficient data frames and better power efficiency, especially when nodes are not connected to a base station. 7.2. Security By default only the image transmission is encrypted using a proprietary encryption protocol. Enhanced encryption/authentication can be requested on demand by loading different firmware on the ESLs in combination with the loading of an encryption key and an additional ESL server module. The protection method for RF-communication is done by 128-bit AES encryption. 8. Labeling 8.1. Product label The product label is affixed to the ESL as shown below. Figure 2: product label 9 EE202 Specifications manual The barcode shows the product serial number. This is a B is followed by 10 hexadecimal digits. This serial number is the same as the MAC address in the ESL-label, with the first 6 digits (3889DC) replaced by a B. Material: Base + laminate protection against wear. Base: PP film, thickness 80m, backing with glue. Laminate: PET film, clear, thickness 25m. The dimensions of the product label are as follows:

10 EE202 Specifications manual 8.2. Shipment box labels The shipment box labels are made from plain paper and are meant to show the regulatory information on the shipment box as well as the quantity in the box. The label design is shown below. The labels are 150mm*95mm and are made from plain paper with adhesive backing. Figure 3: shipment box labels Label A shows the PO number, the Quantity in the box and the serial number range, all encoded in barcodes as shown. In case there are two or less missing serial numbers, only label A is required. In case there are more than 2 missing serial numbers missing, label B is required to show the rest of the missing serial numbers. 11 EE202 Specifications manual 9. Accessories To mount the ESL onto a rail in a shop, the EE202 can be fitted with a rail attachment system made by HL-display system. This rail attachment accessory can click into a standard rail from HL-Display and rails are available for nearly all brands of shelves. Please consult a dealer for details on their offering. The shelftaker that fits the EE202 is available from Opticon as an accessory. Figure 4: HL hinged shelftaker for data strips. 10. Packaging Specifications 10.1. Individual Packaging Specification The ESLs do not need to be packed separately. To easily pack them, 30 pcs need to be packed in a plastic molder tray:

Figure 5: Individual packaging 12 EE202 Specifications manual 10.2. Collective Packaging Specification Pack the tray with 30 EE202s in a plastic bag, fold the open end of the bag and fix it with a piece of tape. Figure 6: Collective packaging 1 Put 10 stacks, containing 300 ESLs inside a box and stick the shipment box label on the indicated position. Figure 7: Collective packaging 2 Note: The RO mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union. 13 EE202 Specifications manual 11. Regulatory Compliance 11.1. Product Safety IEC 60950-1:2005 (2nd Edition)+Am 1:2009+Am 2:2013 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 11.2. EMC the in accordance with instructions, may cause harmful EN55022:2010 EN55024:2010 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. RF Radiation Exposure Statement:

interference to transmitter. 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 14 11.3. WEEE Waste Electrical and Electronics Equipment Directive, 2012/19/EU. EE202 Specifications manual 11.4. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2011/65 EC. 15 EE202 Specifications manual 12. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 12.1. Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 12.2. Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 12.3. Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 12.4. Battery Replace the ESL when its lifetime has expired. This is after max. 10 years of operation or sooner when the battery is depleted. If the battery is depleted sooner, replace the ESL and treat it as chemical waste and dispose of it according to local regulations. 12.5. Other Do not disassemble this product. The ESL may be damaged by high voltage discharges. 16 13. Mechanical Drawing EE202 Specifications manual Figure 8: Mechanical drawing 17

Electronic shelf label EE201 The EE201 is an e-paper based electronic shelf label with a screen size of 2 and with 802.15.4 based wireless communication. Preliminary Specifications Manual EE201 Specifications Manual All information subject to change without notice. Document History Model Number:

Edition:

Date:

EE201 1.2 August 2, 2013 Specification Number:

Original Spec Number:

Copyright 2012 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-

17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Phone: 800-636-0090 Email: support@opticonusa.com Web: www.opticonusa.com Europe Email: support@opticon.com Web: www.opticon.com 2 EE201 Specifications manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 6 3.1. Dimensions ....................................................................................................................... 6 3.2. Weight ............................................................................................................................... 6 4. Environmental Specifications .................................................................................................. 6 4.1. Operating Temperature and Humidity ................................................................................ 6 4.2. Storage Temperature and Humidity ................................................................................... 6 4.3. Static Electricity ................................................................................................................. 6 4.4. Drop resistance. ............................................................................................................... 6 5. Controls ..................................................................................................................................... 7 6. Electrical Specifications ........................................................................................................... 7 6.1. Electrical Characteristics ................................................................................................... 7 6.2. Battery ............................................................................................................................... 7 7. Radio Specifications ................................................................................................................ 8 7.1. Protocol ............................................................................................................................. 8 7.1.1. The physical layer ...................................................................................................................... 8 7.1.2. The medium access control layer .............................................................................................. 8 7.2. Security ............................................................................................................................. 8 8. Labeling ..................................................................................................................................... 9 8.1. Product label ..................................................................................................................... 9 8.2. Shipment box labels ........................................................................................................ 10 9. Accessories ............................................................................................................................ 11 10. Packaging Specifications ....................................................................................................... 11 10.1. Individual Packaging Specification ................................................................................... 11 10.2. Collective Packaging Specification .................................................................................. 12 11. Regulatory Compliance .......................................................................................................... 13 11.1. Product Safety ................................................................................................................. 13 11.2. EMC ................................................................................................................................ 13 11.3. RoHS .............................................................................................................................. 13 12. Safety ....................................................................................................................................... 14 12.1. Shock .............................................................................................................................. 14 12.2. Temperature Conditions .................................................................................................. 14 12.3. Foreign Materials ............................................................................................................. 14 12.4. Battery ............................................................................................................................. 14 3 EE201 Specifications manual 12.5. Other ............................................................................................................................... 14 13. Mechanical Drawing ............................................................................................................... 15 Table of Figures Figure 1: Dimensions .................................................................................................................. 6 Figure 2: product label ................................................................................................................ 9 Figure 3: product label dimensions ............................................................................................. 9 Figure 4: shipment box labels ................................................................................................... 10 Figure 5: HL hinged shelftaker for data strips. .......................................................................... 11 Figure 6: Individual packaging .................................................................................................. 11 Figure 7: Collective packaging 1 ............................................................................................... 12 Figure 8: Collective packaging 2 ............................................................................................... 12 Figure 9: Mechanical drawing ................................................................................................... 15 4 EE201 Specifications manual 1. Abstract This manual provides specifications for the EE201 electronic shelf label (hereafter referred to as ESL). 2. Overview The EE201 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for an ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE 802.15.4 standard that specifies the physical layer and media access control for low-rate wireless personal area networks. The protocol is entirely implemented, except for some small changes that have all to do with the connection protocol to a base station. When the base station is not available the EE201 switches to a non-802.15.4 standard to lower the power. That is especially meaningful when the EE201 is not being used for a prolonged period of time

(e.g. during shipping) A development kit is available that consists out of a base station and several EE201 tags plus a PC demo application that allows people to quickly test the system and makes it easier to integrate this ESL system into an existing back office system. 5 3. Physical Features 3.1. Dimensions W 65.7 x H 34.9 x D 13.7 mm EE201 Specifications manual Figure 1: Dimensions 3.2. Weight 40 g (including battery) 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: 10 to 50 C Humidity: 20% to 85% RH 4.2. Storage Temperature and Humidity Temperature: -20 to 60 C Humidity: 20% to 85% RH 4.3. Static Electricity Air discharge:

Contact discharge:

4.4. Drop resistance. 8 kV MAX (No malfunction) 15 kV MAX (No destruction) 4 kV MAX (No malfunction) 8 kV MAX (No destruction) There will be no sign of decreased performance after the following drop test:

Drop the ESL from 1.8 M above the concrete floor (6 sides, 3 times each). Scratches or discoloration of the casing do not decrease product performance. 6 5. Controls Items Specifications CPU LCD Type 8051 core 8-bit MCU Internal flash ROM Internal RAM Clock frequency Active area Number of dots Dot pitch Modulation 96KB 6 KB 32 MHz W 45.8 x H 22.0 mm W 200 x H 96 111 Horizontal 111 Vertical DSSS Radio Frequency 2394 ~ 2507 MHz Baud rate 250 Kbits / second 6. Electrical Specifications 6.1. Electrical Characteristics EE201 Specifications manual Remarks Dots per Inch Globally approved 2.4GHz band. Conditions: Operating voltage 3.0V unless otherwise specified Parameter Operating voltage Sleep current Poll time Typ 2.03.3 Unit V

<1 20 uA seconds Remarks Lithium primary battery When the transmitter and receiver are idle See below The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals

(called the poll time) and it then transmits a poll request to the base station. When the base station has no data to send, it just acknowledges the poll after which the ESL immediately goes back to sleep. The poll rate is configurable and is set to 20 seconds by default. A higher poll rate will decrease the power consumption but will increase the response time. 6.2. Battery The power is supplied to the ESL by two coin shaped Lithium CR2450 batteries:

Nominal capacity: 1200 mAh (two times 600mAh) Nominal voltage: 3.0 V. Maximum self-discharge rate: <1% per year Usable time: 7 years minimum (Update frequency: 4 times per day, poll time 20seconds) 7 7. Radio Specifications EE201 Specifications manual Parameter Receiver sensitivity Nominal output power Frequency Min

-3 2394 Typ

-97 4.5 Max

-89 7 2507 Transfer rate RSSI range 250Kbit/s 100 Unit dBm dBm MHz dB Remarks Over the entire temp. and operating voltage range Over the entire temp. and operating voltage range Signal strength indication that can be reported to the base station 7.1. Protocol Modified 802.15.4 (Physical layer and Media Access Control layer). 7.1.1. The physical layer The physical layer (PHY) provides the data transmission service, as well as the interface to the physical layer management entity, which offers access to every layer management function and maintains a database of information on related personal area networks. Thus, the PHY manages the physical RF transceiver and performs channel selection and energy and signal management functions. It operates on the above mentioned frequency band. The PHY layer is 100% compliant and is based on direct sequence spread spectrum (DSSS) technique with a transfer rate of 250 kbit/s. 7.1.2. The medium access control layer The medium access control (MAC) layer enables the transmission of MAC frames through the use of the physical channel. Besides the data service, it offers a management interface and itself manages access to the physical channel. It also controls frame validation, guarantees time slots and handles node associations. Finally, it offers hook points for secure services. The EE201 does not make use of the optional network beaconing, instead it used a polling mechanism to increase power efficiency. Some changes are made to the standard to allow for more efficient data frames and better power efficiency, especially when nodes are not connected to a base station. 7.2. Security The 802.15.4 standard 128-bit AES encryption is supported. A secure method for key management is implemented as well. The encryption is optional though and can be configured via the base station. By default the radio traffic is unencrypted. 8 8. Labeling 8.1. Product label The product label is affixed to the ESL as shown below. EE201 Specifications manual Figure 2: product label The barcode shows the product serial number. This is a B is followed by 10 hexadecimal digits. This serial number is the same as the MAC address in the ESL-label, with the first 6 digits replaced by a B. Material: Base + laminate protection against wear. Base: PP film, thickness 80m, backing with glue. Laminate: PET film, clear, thickness 25m. The dimensions of the product label are as follows:

Figure 3: product label dimensions 9 EE201 Specifications manual 8.2. Shipment box labels The shipment box labels are made from plain paper and are meant to show the regulatory information on the shipment box as well as the quantity in the box. The label design is shown below. The labels are 150mm*95mm and are made from plain paper with adhesive backing. Figure 4: shipment box labels Label A shows the PO number, the Quantity in the box and the serial number range, all encoded in barcodes as shown. In case there are two or less missing serial numbers, only label A is required. In case there are more than 2 missing serial numbers missing, label B is required to show the rest of the missing serial numbers. 10 EE201 Specifications manual 9. Accessories To mount the ESL onto a rail in a shop, the EE201 can be fitted with a rail attachment system made by HL-display system. This rail attachment accessory can click into a standard rail from HL-Display and rails are available for nearly all brands of shelves. Please consult a dealer for details on their offering. The shelftaker that fits the EE201 is available from Opticon as an accessory. Figure 5: HL hinged shelftaker for data strips. 10. Packaging Specifications 10.1. Individual Packaging Specification The ESLs do not need to be packed separately. To easily pack them, 30 pcs need to be packed in a plastic molder tray:

Figure 6: Individual packaging 11 EE201 Specifications manual 10.2. Collective Packaging Specification Pack the tray with 30 EE201s in a plastic bag, fold the open end of the bag and fix it with a piece of tape. Figure 7: Collective packaging 1 Put 10 stacks, containing 300 ESLs inside a box and stick the shipment box label on the indicated position. Figure 8: Collective packaging 2 Note: The RO mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union. 12 EE201 Specifications manual 11. Regulatory Compliance 11.1. Product Safety EN60950-1:2001 IEC60950-1:2001 11.2. EMC EN55022 EN55024 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. 11.3. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 13 EE201 Specifications manual 12. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 12.1. Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 12.2. Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 12.3. Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 12.4. Battery Replace the ESL when its lifetime has expired. This is after max. 10 years of operation or sooner when the battery is depleted. If the battery is depleted sooner, replace the ESL and treat it as chemical waste and dispose of it according to local regulations. 12.5. Other Do not disassemble this product. The ESL may be damaged by high voltage discharges. 14 13. Mechanical Drawing EE201 Specifications manual Figure 9: Mechanical drawing 15

Issue Date: Sep. 08, 2015 Page: 1 of 3 EXTERNAL PHOTOGRAPHS OF EUT Front View of EUT Back View of EUT Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Issue Date: Sep. 08, 2015 Page: 2 of 3 Side View of EUT - 1 Side View of EUT - 2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Issue Date: Sep. 08, 2015 Page: 3 of 3 Side View of EUT - 3 Side View of EUT - 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd.

Issue Date: Sep. 08, 2015 Page: 1 of 5 INTERNAL PHOTOGRAPHS OF EUT Battery Open View of EUT-1 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Issue Date: Sep. 08, 2015 Page: 2 of 5 Open View of EUT-2 Open View of EUT-3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Issue Date: Sep. 08, 2015 Page: 3 of 5 Internal View of EUT-1 Internal View of EUT-2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Issue Date: Sep. 08, 2015 Page: 4 of 5 Internal View of EUT-3 Internal View of EUT-4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd. Issue Date: Sep. 08, 2015 Page: 5 of 5 Antenna Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec-

tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap-

pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/ 134 www.tw.sgs.com Member of SGS Group t (886-2) 2299-3279 f (886-2) 2298-0488 SGS Taiwan Ltd.