Product List Transmitter Receiver ANYSYNC 4K HDMI (Transmitter) ANYSYNC 4K USB-C (Transmitter) ANYSYNC 4K (Receiver) ANYSYNC-4KTH ANYSYNC-4KTU ANYSYNC-4KRH Cortex-A7 1.5GHz DDR3 512MB x2, 1600Mbps, 800MHz fCK NOR 128MBit 24MHz, 25MHz, 32.768MHz, 37.4MHz Wi-Fi 5.2GHz External antenna x1 built in case Rechargeable Li-Po Battery 3.7V 3,500mA Assembled HDMI cable 10cm Cortex-A7 1.5GHz DDR3 512MB x2, 1600Mbps, 800MHz fCK NOR 128MBit 24MHz, 27MHz, 32.768MHz, 37.4MHz Wi-Fi 5.2GHz External antenna x1 built in case Rechargeable Li-Po Battery 3.7V 3,500mA Assembled USB Type-C cable 10cm Cortex-A7 1.5GHz DDR4 1GB x2, 2400Mbps, 833MHz fCK eMMC 8GB 24MHz, 32.768MHz, 37.4MHz Wi-Fi 5.2GHz External antenna x2 built in case DC 5V External Adaptor Assembled HDMI cable 10cm 1 2
: ANYSYNC WU HDMI (Transmitter) ANYSYNC-WUTH
: ANYSYNC WU USB-C (Transmitter)
: ANYSYNC-WUTU
: ANYSYNC WU (Receiver)
: ANYSYNC-WURH
: DDR3 256MB x2
: DDR3 256MB x2
: DDR4 512MB x2
: QuickcastPro 4K HDMI (transmitter)
: QuickCastPro-4K-HT
: QuickcastPro 4K USB (transmitter)
: QuickCastPro-4K-CT
: QuickcastPro 4K (Receiver)
: QuickCastPro-4K-RX
:
:
:
, - Optoma
, - Optoma
, - Optoma
: QuickcastPro WU HDMI (transmitter)
: QuickCastPro-WU-HT
: QuickcastPro WU USB-C (transmitter)
: QuickCastPro-WU-CT
: QuickcastPro WU (Receiver)
: QuickCastPro-WU-RX 3
:
:
:
DDR3 256MB x2
, - Optoma DDR3 256MB x2
, - Optoma DDR3 256MB x2
, - Optoma Feature Introduction 1. Transmitter HDMI (or USB Type-C) connector Battery indicator Power button Transmit button Status LED
- Purple : Booting
- Purple flash(100ms) : Factory setting mode
- Blue : Ready to play
- Blue flash(1s) : Playing
- Blue flash(100ms) : Setting mode
- Red : HDMI error
- Red flash(1s): Receiver not found
- Red flash(300ms): HDMI and Receiver error
- Red flash(10time): No Power. need a charge USB Type-C Connector for charger Charger LED Feature Introduction 2. Receiver HDMI connector Power LED Setting button Status LED
- Red : Power on
- Yellow : Playing (or ready in setting mode)
- Yellow flash(1s) : Ready to play
- Yellow flash(500ms) : Setting mode USB Type-C Connector for DC 5V power Operating guide 1. Receiver installation Receiver Connect to HDMI port of display Input power using 5V2A Adaptor
#No data communications Red led is on, Yellow is flash Ready to Play Ready to Play and Wait about 25~35 seconds Operating guide 2. Transmitter installation and synchronize to Receiver Press for 1 seconds to Receivers setting button Press and hold the Transmitters transmit button Ready to synchronize Ready to synchronize Press for 5 seconds turn on the power Release transmit button when blue LED Flashing Ready to synchronize
------
-------
192.168.43.xxx Synchronize complete Ready to Play Press for 1 seconds Receivers setting button to receive mode Sync complete Operating guide 3. Device's screen transmission Transmitter Connect to HDMI or USB Type-C port of Device Press for 5 seconds turn on the power or Blue LED Steady on, ready to Transmit Screen mirroring already synchronized Connecting message Connecting Press Transmit button Operating guide 4. Charging the battery Low Battery (<20%) Red LED is on, Charging already power on state Input power using 5V Adaptor Battery LED indicate High : 80 ~ 100%
Middle : 20 ~ 80%
Low : 0 ~ 20%
Red LED is off and Complete Specification 1. Transmitter Size : 70mm x 70mm x 28mm (Cable Length. 100mm x 20mm) Weight : 120g Battery : 3500mA, 3.7V Li-ion Polymer Battery Charging Power : DC 5V Operating Temperature : 0C ~ 40C Resolution : 720P, 1080P, 1920x1200, 3840x2160(30P) Audio : Mono, Stereo Service life : 5.5~6 hours Video Latency : 200~300ms Distance : ~ 10m Transmission : Wi-Fi 802.11n Standard 5.2GHz Operating Frequency :
CE - 5.170~5.250GHz (36,40,44,48) FCC - 5.170~5.250GHz, 5.745~5.835GHz (36,40,44,48,149,153,157,161,165) KC - 5.170~5.250GHz, 5.745~5.835GHz (36,40,44,48,149,153,157,161,165) Antenna : External Antenna Built in Case Antenna Gain : 2.8 dBi Compatibility : Any device allowing HDMI or USB Type-C output meeting supported resolution Ex) PC, Notebook, etc Specification 2. Receiver Size : 70mm x 70mm x 28mm (Cable Length. 100mm x 20mm) Weight : 55g Input Power : USB Type-C port, DC 5V / 2A Operating Temperature : 0C ~ 40C Resolution : 720P, 1080P, 1920x1200, 3840x2160(30P) Audio : Mono, Stereo Video Latency : 200~300ms Distance : ~ 10m Transmission : Wi-Fi 802.11n Standard 5.2GHz Operating Frequency :
CE - 5.180~5.240GHz (36,40,44,48) FCC - 5.180~5.240GHz, 5.745~5.825GHz (36,40,44,48,149,153,157,161,165) KC - 5.180~5.240GHz, 5.745~5.825GHz(36,40,44,48,149,153,157,161,165) Antenna : External Antenna Built in Case Antenna Gain : 5 150 ~ 5 250 MHz : 4 dBi , 5 725 ~ 5 850 MHz : 3.98 dBi Compatibility : Any device allowing HDMI output meeting supported resolution Ex) PC, Notebook, etc Notice Wireless distance can be changed according to user environment. These products can be in the interference of frequency on using The screen can be cut when the display aspect is not matched with monitor Please Turn off the transmitter and receiver when not using products Please use the 5V voltage adaptor (Equipment shall be supplied by a limited power source) Indoor use only 20cm away from your body. FCC compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Notice FCC Radiation Exposure Statement This equipment complies with RF exposure requirements set forth for an uncontrolled environment. This product is compliant with the essential requirements and other relevant provisions of the Directive 2014/53/EU.