FCC ID: 2AXYP-OSW-20 smart watch

OSW- 201883 Mik: 128giiie AZtU: TAA Declares that this Smart Watch is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU. Smart Watch Smart Watch Model: OSW-20 Hereby, ORAIMO TECHNOLOGY LIMITED. USB Charging Clip Display Screen 1.28" G+F TFT Resolution 240*240 BT Version V4.2 Battery Capacity :

200mAh Battery Type Lithium polymer battery Standby Time :

Up to 20 days * Lab test result Watch Size :

42*42*13mm_ Strap Size 215mm Material Zinc Alloy /PC/TPU Display Screen IP67 Rv: 85x55mm ( BK )

) Verify that BT is enabled on your mobile device. Open the Joywear 2 App of your mobile device and tap the Device" at the bottom of the mobile dashboard. Enable Phone/SMS/App/Alarm/Sedentary Reminder notifications. When you receive a phone call, your watch vibrates and the incoming number or name f the contact sin your address book) wil display. Once reject function in App is turned on, you can long press to reject phone call. When you receive a message, your watch vibrates. Tap to check message. You can add, edit, and delete silent alarms from the Joywear 2 App. Watch vibrates when you sitting too long, The default reminder time is 60 minutes You can change reminder time or close reminder from the Joywear 2 App. Automatically recognize your status and monitor the whole sleep status with analyzing deep sleep, light sleep and awake times, Sleep data could be only checked from the Joywear 2 App. Make sure your device supports BT 4.2. Make sure your device's software is or above iOS 8.0 or Android 4.4. 2Restart BT and reconnect after 20 seconds. 3.Restart mobile phone. 4.Make sure mobile phone is not connected with other device 5.Make sure Joywear 2 is running in system. Make sure your location services are enabled (GPS is working), the product has enough power, the product does not connect with other phone and under activated state then Keep the product close to your phone. Ifstill can not search it, please turn off BT function and reconnect after 20 seconds. Make sure you wear tightly enough to monitor heart rate. Android phone: Make sure the product is connected with your phone. Allow Joyeat 2 App to access notifications. If any securty App installed, add Joyweat 2 to trust list. iPhone: Make sure the product is connected with your phone. Reboot your phone and reconnect it with the product. This product supports IP67 waterproof which allows the product to be held in water for a maximum of 30 minutes at a depth of 1 metre. You can wear it while washing your hands, having a old shower or washing your cr. Please do not wear it while diving or scuba diving,

(a) For the best experience we recommend using the Joywear 2 App for iOS and Android. Setting up the watch on your phone 1 Find the Joywear 2 App in one of these locations, depending on your device:

The Apple App Store The Google Play Store for iPhone for Android phone. 2. Install the App. Note that if you don't have an account with the store you'll be required to create one before you can download the App. 3, When the App is installed, open it and be guided through a series of questions that help you create your account, or login to your existing account. 4, Continue following the onscreen instructions to connect, or pair the product to your phone or tablet. Pantone 375C Data will be kept in product for seven days. When product is connected with mobile, data will be uploaded to mobile automatically. Kinaly synchronize product data to mobile in time. Note: Call and message notifications only work under BT connection status FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

& Email: hello.ab@oraimo.com 1. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions. 2. The product shall only be connected to a USB interface of version USB2.0 3, Adapter shall be installed near the equipment and shall be easily accessible, 4, EUT Temperature:-20~+60C (Standalone),-20~+60C(With Parts). BT: 2402-2480MHz GFSK BLE:-0.84dBm Your account asks for information such as height, weight, and gender to make various calculations such as stride lengths to estimate distance and basal metabolic rate to estimate calorie bum. You can modify your information in Joywear 2-Profile-Me. When you're done pairing, read through the guide about this product and then explore the dashboard. For all-day wear, your watch should usually rest a fingers width below your wrist bone and lay flat, as you would normally wear a watch,

@ Put the watch into the USB charging clip. oovdo000000000000 ooo00009 in accordance with pla of Directive 2014/53/EU of the European Parliament and of the ounci 1. For the following Radio equipment:

Model: OSW-20 Product: Smart Watch Trade name or Brand: oraimo Software / Hardware number: RH1151BV001114/ RH115A-VO1 2. Name and address of the manufacturer or his authorised representative:

Manufacturer: ORAIMO TECHNOLOGY LIMITED Add: ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL 3. This declaration of conformity is issued under the sole responsibility of the Manufacturer. 4, Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):

5. The object of the declaration described above is in conformity with the relevant Union harmonization legislation:

Directive 2014/53/EU (RED) 6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:

Article 3.1a Health: EN 62479:2010 Article 3.1a Electrical Safety: EN62638-1:2014+A11:2017 Article 3.1b: ETSI EN 301 489-1 V2.2.3 (2019-11) Draft ETSI EN 301 489-17 V3.2.2 (2019-12) Article 3.2: ETSI EN 300 328 V2.2.2 (2019-07) 7. Notified Body Name: MET Laboratories, Inc. Notified Body Number: 0980 Notified Body Assessment Performed:

Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3 Technical File Identification Number: N/A 8, Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:

User instructions are provided in the User Manual. The Software and Hardware versions are specified above. 9. Additional information:

Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum, Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorisation of use. Please refer to the User Manual for details On behalf of:

Manufacturer: ORAIMO TECHNOLOGY LIMITED Add: ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL

(place and date of issue): Shenzhen, 2019-12-23

(name, function): Yiting Luo/ Manager

(signature): Yj wi LW

@ Insert the USB into chargers or laptops. a009000000000000 nooooot

@ The screen displays as follows when charging,

@ The screen displays as follows when charging completed.

+ When the watch is under shutdown mode, charge the watch or long press the home button for 3 seconds to power on the watch.

+ When the watch is turned on, swipe the screen to the Setting function, tap to enter. Then swipe to the "Off" and tap to confirm, the watch vibrates and shuts down When you're not using this product, the display is off. To wake it up:

+ Press the home button.

+ Tum your wrist towards you. This behavior, known as Light Up, can be tumed off in your smart watch settings in Joywear 2. The home screen is a clock. On the clock face you can swipe to see your steps taken, distance, calories burned, heart rate, training, weather, message, music, stopwatch and function. rE: RES LACS BEM |

Name:

Address :

Tel. No. :

Date of purchase :

(dd/mm/yy) Store name:

Warranty period :

All quality-related defects on items sold directly by oraimo or oraimos authorized resellers are covered by an extensive warranty, starting from the date of purchase. oraimos limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase. This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product. Warranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty. If the product fails regardless of usage in compliance with the instruction manual and other written precaution, replacement will be provided free of charge. To receive replacement, bring the warranty certificate and the product itself to the store from where you have purchased the product. Change Clock Face Long press for 3 seconds to enter and then swipe to view different clock faces. Tap once to confirm. Distance Shows your current distance. Steps Shows your current steps taken. Calories Burned shows your current distance. Heart Rate Message Automatically monitors and shows Tap onc to view message. your real-time heart rate. Swipe to check next message. Music Stopwatch Tap to play/pause/skip track. Tap to enter and start/reset the stopwatch. Training el, once to enter, then swipe to view and tap to enter different training modes. Then tap once to start training and slide right to choose to end. Search noe parce mode, tap and hold for 3 seconds, your connected phone will vibrate. Setting Tap once to enter sub-menu. Reset - Tap once to reset the Bright - Tap to adjust screen watch and Joywear 2 App. brightness. 8" - Tap once to view the Watch Noma Wise and Vedon @ Off - Tap to power off the watch.

File Name Block Diagram Schematics Operational Description

(ORAIMO TECHNOLOGY LIMITED) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:

2AXYP-OSW-20 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram, Schematics, Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Exhibit Type External Photos, Internal Photos, Test Setup Photo, Manual number of days 180 days Sincerely, File Name External Photos.pdf, Internal Photos.pdf, Test Setup Photo.pdf, User Manual.pdf

(Greeny Xian) Rev 11/20/07

(ORAIMO TECHNOLOGY LIMITED) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/12/03 SUBJECT: FCC Application for FCC ID: 2AXYP-OSW-20 To Whom It May Concern:

We, the undersigned, hereby authorize Alan Mei at Shenzhen BCTC Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Alan Mei of Shenzhen BCTC Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(Greeny Xian)