FCC ID: 2AXYP-OEB-E108D-L True Wireless Earbuds

* For safety issue, the product remains low capacity during WELCOME GUIDE | shipping, Please fully charge the product before initial use!

Please read this Guide carefully before using the product Package Contents lat True Wireless Earbud x 2 Charging Case x 1 e Silicone Case x1 fo oC \fi_\

M Type-C Charging Cable x 1 Pair of Eartips x3 Product Overview Earbud Status Indicator Multi-Function Touch Pad Multi-Function Touch Pad Microphone Right Earbud (

Left Earbud Case Status Indicator

Reset Button Type-C Charging Port For more information, please vis!

www.oraimo.com = @oraimo accessories Basic Product Specifications *Lab test result EARBUDS Charging time: 1.5 hours Range: 10m ttery capacity: 70mAh (each earbud) Music playtime: Up to 13 hours; Case provides additional 30 hours (ANC OFF) Up to 9 hours; Case provides additional 23 hours (ANC ON) CHARGING CASE Charge times for earbuds: Up to 25times _| Charging time: 2 hours Battery capacity: 510mAh Using Your Earbuds Turn On & Pairing

+ Remove the protective film Protective film Put the earbuds back to the charging case Fully charge the case for 2 hours. Attention

* Use original or certified cables

* Do not expose to liquids

* Do not disassemble

* Avoid dropping

* Avoid extreme temperatures

* Do not use the product outdoors during a thunderstorm Do not use any corrosive cleaner/oil to clean Considerate Hints 1.Do not tum up the volume to a fair high level constantly as this could shorten the service life of this product or impair your hearing 2When encounter any fault during operation, please cut off the power supply and disconnect the Type-C cable to prevent further damage to the product or other components. 3.The wireless transmission range or connectivity could be affected by low battery power. In that case, please recharge immediately. Customer Service 365 DAYS WARRANTY

& Email India: care.in@oraimo.com Nigeria: care.ng@oraimo.com Kenya: care.ke@oraimo.com Ghana: care.gh@oraimo.com Morocco: care.ma@oraimo.com Africa: service@carlcare.com

'Y Make sure the distance of the earbuds and your device is less than 1 metre / 3.3 feet at the first time of connection. Y When turned on, the earbuds will automatically connect to the last connected device if available. If not, the earbuds will automatically enter pairing mode. Y If you want to clear the pairing list, press the reset button for 5s to clear the list with lid opened 9 Under any abnormal condition, return the earbuds to the charging case with the lid closed for 10s and then take out it again. Turn Off

@ When the earbuds are in the charging case and the lid is closed, it will automatically turn off after being fully charged FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. True wireless earbuds Model: OEB-E108D_ Hereby, ORAIMO TECHNOLOGY LIMITED. Declares that this True wireless earbuds in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU. Caution 1_ Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss. 2. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.

= disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. 3. The product shall only be connected to a USB interface of version USB 2.0. 4. EUT Temperature: 0C ~ +40 C (Standalone), 0~+40C (with adapter) 5. To prevent possible hearing damage, do not listen at high volume levels for long periods 6. USB cable is shielded r 4 Operating Frequency:

BT: 2402-2480MHz Modulation mode: L 4 GFSK, 1/4-DOPSK, 8DPSK GFSK(BLE) Figure 1-Warning label GEC 60417-6044) Charging Your Earbuds Earbuds will be charged automatically once they are retumed to the charging case with the lid closed Ithas voice prompt when the battery of earbuds is low. Charging Your Case Case Status Indicator Low battery Middle battery Being charged Fully charged High battery Use the included Type-C charging cable to charge the case Case Power Level Case Status Indicator Power Level Steady red for two seconds and off Steady green Y Make sure close the lid then press the reset button once to check the case power. EU DECLARATION OF CONFORMITY in accordance Annex VI of Directive 2014/53/EU of the European Parliament and of the Council 1. For the following Radio equipment:

Model: OEB-E108D Product: True wireless earbuds Trade name or Brand: oraimo Software / Hardware number: V0.2.2 / V1.0.0 2. Name and address of the manufacturer or his authorised representative:

Manufacturer: ORAIMO TECHNOLOGY LIMITED Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT 3. This declaration of conformity is issued under the sole responsibility of the Manufacturer. 4, Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):

5, The object of the declaration described above is in conformity with the relevant U harmonization legislation:

Directive 2014/53/EU (RED) 6, References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:

Article 3.1a Health: EN 62479:2010 Article 3.1a Electrical Safety: EN62368-1:2014+A11:2017 Article 3.1b: ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.4 (2020-09) Article 3.2: ETSI EN 300 328 V2.2.2 (2019-07) 7. Notified Body Name: Eurofins Electrical and Electronic Testing NA, Ini Notified Body Number: 0980 Notified Body Assessment Performed:

Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3 Technical File Identification Number: N/A 8. Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformi User instructions are provided in the User Manual. The Software and Hardware versions are specified above. 9, Additional information:

Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum. Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorisation of use. Please refer to the User Manual for details. On behalf of:

Manufacturer: ORAIMO TECHNOLOGY LIMITED. Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT

(place and date of issue): Shenzhen, 2021-11-03

(name, function): Viting,Luo/ Manager

(signature: ing LW Pop-up Notification-Google Fast Pairing 40:41 AM * 104) AMS oraimo FreePods Pro oraimo FreePods Pro a) 2) Pop-up notification is considered compatible with Android 6.0 or above, and your device must support Google Play service at the same time. Controls Play/Pause Next track Previous track WARRANTY CERTIFICATE Date of purchase :

(dd/mm/yy) Store name:

Warranty period :

WARRANTY TERMS & CONDITIONS

* All quality-related defects on items sold directly by oraimo or oraimo's authorized resellers are covered by an extensive warranty, starting from the date of purchase.

* oraimos limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.

* This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this prod Warranty is for the primary product only nor transferable. Any free additional product(s) are not covered in this warranty.

* If the product fails regardless of usage in compliance with the instruction manual and other written precaution, replacement will be provided free of charge.

* To claim the warranty, contact the services team from the platform or store where you bought from. Tap on one earbud once Answer a call Tap and hold on one earbud then Reject call release when you hear 2 beeps ire Tap on earbud twice End/cancel a call Switch among Active Noise Cancellation, Transparency mode, and Off with voice prompt Tap and hold on left earbud then release when you hear 2 beeps 9 ANC function only works when placing both earbuds in your ears. Long press the reset button on th:

charging case then release when the case indicator light flashes once Restore factory settings Tap on any earbud twice and hold on Enter pairing mode and try it then release when you hear 6 beeps to connect to new device Tap and hold on left earbud then release when you hear 4 beeps EQ switch* with voice prompt HavyBass = Normal Mode Game Mode switch

*with voice prompt Tap and hold on right earbud then release when you hear 4 beeps Tap and hold on right earbud then Activate Voice Assistant release when you hear 2 beeps

*Game Mode supports extra low-latency effect to enhance game experience

*HavyBass is proprietary sound-tuning technology to increase low-frequency for deep and powerful bass in the music.

+EQ Switch and Game Mode only work when placing both earbuds in your ears. smart accessories FreePods Pro

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS211201-61956E-RF FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1

ORAIMO TECHNOLOGY LIMITED Address:

Flat 39, 8/F., Block D, Wah Lok Industrial Centre, 31-35 Shan Mei Street, Fotan, NT, Hong Kong Tel.: +86-0755-61803856 Email: dollyphin@oraimo.com Date: 2021-12-23 FCC certification No. Cover Letter We, ORAIMO TECHNOLOGY LIMITED, hereby submit justification for placing the FCC certification No. in the associated charging case. According to the FCC regulation, the FCC certification No. should be printed on the earbuds, but as the earbuds are too small to print the label (FCC ID: 2AXYP-OEB-E108D-L) , it will be moved to the charging case. The details are as below:

A. Side surface (A): The side surface does not provide enough physical space to fit the printing of the FCC certification No. according to below reference picture. B. Top cover (B): The top cover does not provide enough physical space to fit the printing of the FCC certification No. according to below reference picture. Conclusion: Based on the above description of area A to B, we conclude that the device is unquestionably too small for enabling the FCC certification No. to be printed onto any surface. We therefore request to move the FCC certification No. to the charging case. Label:

Best regards, Signature:

Greeny Xian Manager

ORAIMO TECHNOLOGY LIMITED Address:

Flat 39, 8/F., Block D, Wah Lok Industrial Centre, 31-35 Shan Mei Street, Fotan, NT, Hong Kong Tel.: +86-0755-61803856 E-mail: dollyphin@oraimo.com FCC Confidential Authorization Date: 2021-12-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AXYP-OEB-E108D-L In accordance with Sections 0.457 and 0.459 of the Commissions Rules, ORAIMO TECHNOLOGY LIMITED hereby requests long-term confidential treatment of information accompanying this application as outlined below:

As well as short-term confidential treatment of information accompanying this application for a period of 180 days after grant is issued as outlined below:

Block Diagram Schematics Operation Description Internal Photos Users Manual External Photos Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Greeny Xian Manager

ORAIMO TECHNOLOGY LIMITED Address:

Flat 39, 8/F., Block D, Wah Lok Industrial Centre, 31-35 Shan Mei Street, Fotan, NT, Hong Kong Tel.: +86-0755-61803856 Email: dollyphin@oraimo.com Date: 2021-12-23 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

The RF chip, model BES2500IH, which installed in our product True wireless earbuds, Model: OEB-E108D, FCC ID: 2AXYP-OEB-E108D-L, supports BDR (GFSK), EDR

(/4-DQPSK, 8DPSK), BLE 1M and BLE 2M functions. For use in America and this chip will not support/enable BLE 2M. The BLE 2M has been shielded by the manufacturer using the software. Sincerely Yours, Signature:

Greeny Xian Manager