Power Bluetooth Trigger TPMS Diagnostic Tool O-Genius Lite V1.62 Users Manual Android: 8 or up iOS: 12.1 or up Orange Electronic Co., Ltd.
(Headquarter) 5F, NO.29, Keya Rd. Central Taiwan Science Park, Taichung 42881, Taiwan service@orange-electronic.com Tire Pressure Monitoring System Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution To assure continued compliance, any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Product and Accessories Power Bluetooth Trigger O-Genius Lite OBD Extension Cable 9V Battery Specications Battery Operating Voltage DC 6V~9.5V Operating temperature
-10 ~ 60 OBD Operating Voltage DC 9V ~ 16V Storage temperature
-20 ~ 70 Consumption current 70mA (6V~9.5V -DC) Receiving frequency 433.92 MHz 50kHz 315 MHz 50kHz O-Genius Lite USERS MANUAL 02 Before Starting 1 Install App 2 Turn on O-Genius Lite 3 Connect to Bluetooth Connect to WiFi. Download app by scanning QR codes. Press and hold the button for 3 seconds until 3 lights starts to ash. 1. Open the Oglite App and the system will connect to Bluetooth. 2. Select Area, Language and conrm Privacy Policy. 3. Create an account. Power Bluetooth Trigger O-Genius Lite Area Select Device Select OG_LITE-2AF778 Language Select 4 Connect to Bluetooth Make sure the Bluetooth light is on when you connect to Bluetooth. 5 Create a new account Select Registration 6 Sign in Key in all require information and click Submit. System will login automatically. Power Bluetooth Trigger The Bluetooth light is on. O-Genius Lite Registration Sign in O-Genius Lite Creat your email account Company Entity (File) Number E-mail Phone number Cancel Submit O-Genius Lite USERS MANUAL 03 Read Sensor 1 Select Check Sensor 1. This icon means connecting OG-Lite. 2. This icon can show OG-Lite power.
(*FAQ 14) O-Genius Lite Read Sensor Program 2 Select Vehicle Selection 3 Select Make, Model, Year O-Genius Lite Vehicle Selection Scan QR Code Read Sensor Select Make Select BMW BENTLEY BMW 1(F20 F21) BMW/1(F20 F21) 2014-2019 4 Select Read Sensor 5 Completed 6 O-Genius Lite O-Genius Lite Not all of the OE sensors contain temperature and battery status. ID psi C LF RF RR LR Not all of the OE sensors contain temperature and battery status. ID psi C 0CE8742B 34 26 OK LF RF RR LR Menu Read Sensor Read Sensor Menu Read Sensor Read Sensor O-Genius Lite USERS MANUAL 04 Program 1 Select Program Select Vehicle Selection 2 3 Select Make, Model, Year O-Genius Lite O-Genius Lite Read Sensor Select Make Select Check Sensor Program Vehicle Selection BMW BENTLEY Scan QR Code BMW 1(F20 F21) BMW/1(F20 F21) 2014-2019 4 Select Sensor Quantity 5 Select Trigger 6 Select Program Program BMW/1(F20 F21)/2014-2019 Sensor quantity 1 pcs 2 pcs 3 pcs 4 pcs 7 Completed Program The QR code must under the bar code and close to OG tools. Keep other sensors 2 meters away. ID psi C C4E87497 34 26 OK C4E87497 34 26 OK C4E87497 34 26 OK C4E87497 34 26 OK 1 2 3 4 Program Relearn Procedure Program Enter Sensor ID method Trigger 9: 21 Scanner Scan QR Code Program The QR code must under the bar code and close to OG tools. Keep other sensors 2 meters away. ID psi C 1 2 3 4 Menu Program Read Sensor O-Genius Lite USERS MANUAL 05 ID Copy-Single program 1 Select ID Copy and Vehicle Selection O-Genius Lite ID Copy OBD Relearn O-Genius Lite Vehicle Selection Scan QR Code 2 Select Make, Model, Year 3 Select Single-program Read Sensor Select Make Select BMW BENTLEY BMW 1(F20 F21) BMW/1(F20 F21) 2014-2019 ID Copy BMW/1(F20 F21)/2014-2019 Single program Multi-program 4 Three options to read sensor 3 ways to read new sensor. Use Read Sensor as an example. 5 Select Read Sensor 6 Select ID Copy ID Copy ID Copy ID Copy BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 Select Keep other sensors 2 meters away Keep other sensors 2 meters away Read Sensor Key in Scan QR Code 7 Completed ID Copy BMW/1(F20 F21)/2014-2019 Keep other sensors 2 meters away original New OK Select LF C4E87497 C4E87497 Re-Program Read Sensor Key in original New OK original New OK 1 1 C4E87497 Relearn Procedure Read Sensor Relearn Procedure ID Copy Note If the original sensor is broken, please select Key in function. Please follow the process below. ID Copy ID Copy ID Copy BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 Keep other sensors 2 meters away Original New OK Keep other sensors 2 meters away Original New OK 1 1 double click Menu Relearn Procedure Scan QR Code Relearn Procdeure Read Relearn Procdeure Key in Read del Enter O-Genius Lite USERS MANUAL 06 ID Copy-Multi-program 1 Select ID Copy and Vehicle Selection O-Genius Lite ID Copy OBD Relearn O-Genius Lite Vehicle Selection Scan QR Code 2 Select Make, Model, Year 3 Select Multi-program Read Sensor Select Make Select BMW BENTLEY BMW 1(F20 F21) BMW/1(F20 F21) 2014-2019 ID Copy BMW/1(F20 F21)/2014-2019 Multi-program 3 ways to read new sensor. Use Read Sensor as an example. ID Copy BMW/1(F20 F21)/2014-2019 Select Read Sensor 4 Select Read Sensor 5 Read Sensor Select the next tire to read sensor and repeat until all 4 sensors are complete. 6 Select Next ID Copy BMW/1(F20 F21)/2014-2019 ID Copy ID Copy BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 ID LF RF RR LR Menu Read Sensor Read Sensor ID C4E87497 LF RF RR LR ID C4E87497 0CE857F1 04E85555 0CE8742B LF RF RR LR Menu Read Sensor Next Menu Read Sensor Next 7 Select ID Copy 8 ID Copy Select the next tire position and select ID Copy, repeat until complete 9 Completed ID Copy ID Copy ID Copy BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 BMW/1(F20 F21)/2014-2019 Keep other sensors 2 meters away Keep other sensors 2 meters away Keep other sensors 2 meters away original New OK LF RF RR LR C4E87497 0CE857F1 04E85555 0CE8742B original New OK C4E87497 C4E87497 0CE857F1 04E85555 0CE8742B LF RF RR LR original New OK LF RF RR LR C4E87497 C4E87497 0CE857F1 0CE857F1 04E85555 04E85555 0CE8742B 0CE8742B Relearn Procedure ID Copy Relearn Procedure ID Copy Re-Program Relearn Procedure O-Genius Lite USERS MANUAL 07 OBD Relearn 1 Select OBD Relearn and Vehicle Selection O-Genius Lite ID Copy OBD Relean 2 Select Make, Model, Year 3 OBD Relearn Select Make TOYOTA TOYOTA O-Genius Lite Auris/Touring Sports Vehicle Selection TOYOTA/Auris/Touring Sports 2014-2018 Select Next Please follow the vehicle Relearn Procedure. (Reminder: dierent vehicle will have dierent procedure, it will determine the following steps) OBD Relearn TOYOTA/Auris/Touring Sports OE Part# 42607-02070 Orange Sensor SP201 Step. Menu Next 4 3 options to read sensor 3 ways to read new sensor. use Read Sensor as an example. 5 Read new sensor IDs Press new sensor position to read sensor. 6 Read new sensor IDs Repeat procedure for other positions. OBD Relearn OBD Relearn OBD Relearn TOYOTA/Auris/Touring Sports Select Read Sensor Key in Scan QR Code Origianl New OK Origianl New OK LF RF RR LR C4E87497 LF RF RR LR Menu OBD Relearn Read Sensor Menu OBD Relearn Read Sensor 7 Select OBD Relearn 1. Turn ignition to ON, engine o. 2. Plug in O-Genius Lite. 3. Select OBD Relearn OBD Relearn 8 Completed OBD Relearn Origianl Trigger Bluetooth Power New OK LF RF RR LR C4E87497 0CE857F1 04E85555 0CE8742B Menu OBD Relearn Read Sensor Origianl New OK LF RF RR LR OE111111 C4E87497 OE222222 0CE857F1 OE333333 04E85555 OE444444 0CE8742B Menu OBD Relearn Read Sensor O-Genius Lite USERS MANUAL 08 ID Copy (OBD) 1 Select ID Copy(OBD) and Vehicle Selection O-Genius Lite ID Copy
(OBD) Online Shopping O-Genius Lite Vehicle Selection 4 Select Next O-Genius Lite will detect the sensor ID automatically, and select Next. ID Copy(OBD) LF LR RF RR ID C4E87497 0CE857F1 04E85555 0CE8742B LF RF RR LR 2 Select Make, Model, Year 3 Relearn Procedure Select Make Select TOYOTA TOYOTA Auris/Touring Sports TOYOTA/Auris/Touring Sports 2014-2018 Plug in O-Genius Lite 1. Turn ignition to ON, engine o. 2. Plug in O-Genius Lite. ID Copy(OBD) Bluetooth Power ID Trigger LF RF RR LR Menu ID Copy Read Sensor 5 Select ID Copy 6 ID copy Select the next tire position and select ID Copy, repeat until complete ID Copy(OBD) Keep the other sensor 2 meters away Origianl New OK LF RF RR LR C4E87497 0CE857F1 04E85555 0CE8742B ID Copy(OBD) Keep the other sensor 2 meters away Origianl New OK C4E87497 C4E87497 0CE857F1 04E85555 0CE8742B LF RF RR LR Menu ID Copy Relearn Procedure Next Menu ID Copy Read Sensor 7 Completed ID Copy(OBD) Origianl New OK LF RF RR LR C4E87497 C4E87497 0CE857F1 0CE857F1 04E85555 04E85555 0CE8742B 0CE8742B Menu Relearn Procedure Read Sensor O-Genius Lite USERS MANUAL 09 Relearn Procedure 1 Select Relearn Procedure 2 Select Make, Model, Year 3 Completed O-Genius Lite OBDII Relearn Relearn Procedure Relearn Procedure Select Make Select TOYOTA TOYOTA Relearn Procedure TOYOTA/Auris/Touring Sports OE Part# 42607-02070 Orange Sensor SP201 Step. Auris/Touring Sports Connect the OBDII module on the vehicle. TOYOTA/Auris/Touring Sports 2014-2018 Menu O-Genius Lite USERS MANUAL 10 FAQ 1 2 3 4
(Program) How many sensors can be programmed by the tool simultaneously?
It is possible to program up to 4 sensors at the same time. M odell Po wer Bluetooth Trigger
(Program) Multi-programming: Please align the box as shown below:
(Program) Is it possible to program the sensors when they are mounted inside the tires?
Yes, Orange sensors can be programmed even the sensors are already mounted in the tires with full pressure. M o d e l l r g e i g T r B l u e t o o t h r P o w e
(Read/ Program) Read or Program failure when sensor mounted in tire. Please make sure tool is close to the tire and try it again.(Please follow the image) M o d e l l r g e i g T r B l u e t o o t h r P o w e O-Genius Lite USERS MANUAL 11 FAQ 5
(Program) Program failure, Sensor is not mounted inside the tire. Modell Modell Power Power Bluetooth Bluetooth Trigger Trigger Please make sure to keep other sensors 2 meters away. 6
(ID Copy) I cant detect original sensors ID when I do ID Copy. ASTON MARTIN Audi BMW BENTLEY 7
(ID Copy) ID Copy new sensor failure 1. Please make sure you choose the correct MMY. 2. The sensor battery may be dead, please choose the "Key in" method. Modell Power Bluetooth Trigger 1. Please make sure the sensor ID and the programming sensors ID are the same. 2. Please make sure to keep other sensors 2 meters away. 8
(OBD Relearn) During OBD Relearn, does it only transfer sensor ID to ECU?
Yes, during OBD Relearn, you could only upload sensor ID to ECU. O-Genius Lite USERS MANUAL 12 FAQ 9
(Operation) Download car information too long or no action . 10
(Operation) How can I update my version?
update Detect new version. Do you want to update now?
Cancel Enter 11
(Operation) Cannot connect to O-Genius Lite Please check the WiFi connection. System will detect new version automatically. Do not turn o this function. Modell Power Bluetooth Trigger Please make sure the Bluetooth light is on. If so, it might connect to other device. Please restart O-Genius Lite and connect again. 12
(Battery) What type of battery should I use?
Use the Alkaline battery or Rechargeable Battery. O-Genius Lite USERS MANUAL 13 FAQ 13
(Battery) How can I check my battery power?
Power Bluetooth Trigger Power Bluetooth Trigger Power Bluetooth Trigger Power Bluetooth Trigger 76~100%
51~75%
26~50%
0~25%
14
(Battery) To change battery:
After turning on, 3 indicator light will ash 5 times, and then showing the battery status. Please check the image on the (right, left, below, or above) to see more details. To prevent battery cover falling o during installation, it is designed t closely in. When changing batteries, please use a athead screwdriver to open the battery cover. O-Genius Lite USERS MANUAL 14