FCC ID: XGS-BTCT1 Shipping Container Tracker

CT 1000 User Guide Nov. 2022, Version 02 GJD113-ECert-E ORBCOMM GJD113-ECERT-E- CT 1000 USER GUIDE CONTACT AND LEGAL INFORMATION Visit ORBCOMM Online www.ORBCOMM.com Contact Support Website: https://www.orbcomm.com/en/support Email: customer.care@orbcomm.com Phone:

(North America Toll-Free) 1.833.851.3280

(United Kingdom Toll-Free) +44 800 538.5909

(USA / International Toll) +1.804.404.8681

(United Kingdom Toll) +44 20 3855.6153

(Australia Toll) +61 (8) 6186 9633

(Austria, Germany, Switzerland Toll) +49 89.208045522

(New Zealand Toll) +64 (9) 884 1439

(Ireland Toll) +353 1.582.4013 Head Office: 395 W Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Export Control Statement The contents of this document, in whole or in part, shall not be exported from the United States, which export shall include, but not be limited to, transmittal to any non-U.S. citizen wherever said person is located, except in accordance with all United States laws and regulations relating to exports and to all administrative acts of the U.S. Government pursuant to such laws and regulations. Diversion, re-export or transshipment of the contents of this document, in whole or in part, contrary to U.S. law is also strictly prohibited. Trademark Notice The ORBCOMM name and the ORBCOMM logo are registered trademarks owned by ORBCOMM LLC or its affiliated companies. Other trademarks, trade names, and logos are those of their respective owners. 2 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE TABLE OF CONTENTS CONTACT AND LEGAL INFORMATION ........................................................................................................................................................ 2 TABLE OF CONTENTS.................................................................................................................................................................................3 PREFACE .................................................................................................................................................................................................. 4 Purpose ..................................................................................................................................................................................... 4 1. 2. 3. 4. Notation ....................................................................................................................................................................................4 Battery Safety Warnings ............................................................................................................................................................ 4 Environmental Protection .......................................................................................................................................................... 4 PRODUCT OVERVIEW ................................................................................................................................................................. 5 SPECIFICATIONS......................................................................................................................................................................... 6 Temperature ................................................................................................................................................................. 6 2.1. 2.2. Power ...........................................................................................................................................................................6 2.3. 2.3.2. 2.3.3. 2.3.1. RF Specifications............................................................................................................................................................ 6 Cellular Communication ................................................................................................................................................... 6 BLE RF Interface ................................................................................................................................................................ 6 GNSS RF Interface ............................................................................................................................................................. 6 2.4. Battery.......................................................................................................................................................................... 7 2.5. Mechanical .................................................................................................................................................................... 7 COMPLIANCE ............................................................................................................................................................................. 8 INSTALLATION INSTRUCTIONS ................................................................................................................................................. 10 4.1. Mount the CT 1000 ...................................................................................................................................................... 10 Gather the Required Tools and Materials ....................................................................................................................... 10 Prepare for the Installation ............................................................................................................................................. 11 Prepare the Mounting Location ...................................................................................................................................... 11 Tape the CT 1000 to the Asset ........................................................................................................................................ 11 Install the Rivets ............................................................................................................................................................. 11 Associate the Device ....................................................................................................................................................... 11 4.1.4. 4.1.1. 4.1.5. 4.1.2. 4.1.3. 4.1.6. 3 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE PREFACE Purpose This guide contains product information for the CT 1000, including product description and specification, installation guide, certification content and regulation warning etc. Notation Hardware components and hardware labels in this document might not be exactly as shown and are subject to change without notice. CAUTION:

This safety symbol warns of possible hazards to personnel, equipment, or both. It includes hazards that will or can cause personal injury, property damage, or death if the hazard is not avoided. Note: A note indicates information with no potential hazard. A note indicates points of interest or provides supplementary information about a feature or task. Numbered lists indicate a series of steps required to complete a task or function. Bulleted lists highlight information where order or sequence is not crucial. Battery Safety Warnings CAUTION: Always follow local disposal guidelines to properly dispose of the Lithium-ion battery and the device. CAUTION: DO NOT throw the internal battery or the device into fire. Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with our Local Authority or retailer for recycling advice. 4 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE 1. PRODUCT OVERVIEW The CT 1000 is a cellular, self-contained tracking solution principally designed for tracking and monitoring globally roaming assets such as shipping containers. The CT 1000 interfaces with wireless sensors through Bluetooth Low Energy and integrated internal sensors to monitor the status and condition of the asset. The CT 1000 is powered through an internal battery that is recharged using an integrated solar panel. Figure 1: CT 1000 5 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE 2. SPECIFICATIONS 2.1. Temperature Parameter Value Operating Temperature Range

-20 to +70C (-4 to +158F) Storage Temperature Range

-40 to +80C (-40 to +176F) Battery Charging Temperature Range

-20 to +50C (-4 to +122F) 2.2. Power The CT 1000 is powered through the internal battery that is recharged using an integrated solar panel. 2.3. RF Specifications 2.3.1. Cellular Communication The device includes a module capable of global cellular communications over LTE, 3G, and 2G networks. Parameter LTE Category LTE Bands Value Cat 1 1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 25, 26, 28, 38, 39, 40, 41 UMTS/HSPA+ Bands 1, 2, 4, 5, 6, 8, 19 GSM Bands 2, 3, 5, 8 2.3.2. BLE RF Interface The device includes an internal BLE antenna. 2.3.3. GNSS RF Interface The GNSS system includes an internal antenna. The GPS provides unassisted cold start in <35 seconds and assisted in <20 seconds. The 3D, aided position accuracy is <10 m CEP. 6 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE 2.4. Battery The CT 1000 includes a rechargeable long life, industrial grade 3.6V nominal battery able to supply the current necessary for all operational modes. The battery pack is within the enclosure without causing any interference. The CT 1000 is charged with an integrated solar panel that provides power to the battery charging system. PARAMETER Battery Capacity Voltage (nominal) Maximum Current output Maximum Charge current Battery Charging Solar Open Circuit Voltage Solar Power Charge Current 2.5. Mechanical The devices mechanical dimensions are shown below. MIN TYP MAX UNITS 330

2.0 100 4.84 400 1

3.6

90 mAh V A V V mW mA 7 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE 3. COMPLIANCE Certifications for the following are pending, unless noted otherwise. CE Mark (Europe) RED 2014/53/EU Declaration of Conformity Hereby, ORBCOMM declares that the radio equipment type CT1000 is in compliance with Directive 2014/53/EU. The DOC (Declaration of Conformity) is either included in the packaging or can be found at the following link:

The full text of the EU declaration of conformity is available from http://www2.orbcomm.com/eudoc. IEC 60079-22, Explosive Atmospheres Part 11: Equipment Protected by Intrinsic Safety, June 2011. IEC 60529 rev 2.1, Degrees of protection provided by enclosures (IP code), February 2001. ISED (Canada) IC ID: 11881A-BTCT1, & Contains IC: 10224A-201906EG21G. CAN ICES-3 (A)/NMB-3(A) Innovation, Science and Economic Development Canada Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. ICES-003 Issue 7, October 2020, Interference-Causing Equipment Standard, Information Technology Equipment (including Digital Apparatus) RSS-102 Issue 5, March 2015, Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) RSS-247 Issue 2, February 2017, Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the radiator and any part of your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Pour se conformer aux exigences de conformit ISED RSS-102 RF exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil et toutes les personnes. Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec dautres. FCC (United States of America) FCC ID: XGS-BTCT1, & Contains FCC ID: XMR201906EG21G. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment In order to comply with FCC RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. Ingress Protection Device enclosure: IPx7, IPx9k, and IP6x 8 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE RHoS Restriction of Hazardous Substances (RoHS) International / EU certification Compliant with UN 38.3 International/EU certification for battery cell/pack transportation. PTCRB ATEX Zone 2 Hazardous Location Standards, II 3 G Ex ic IIB T6 Gc Global Market Access USA, Canada, EU, Japan, Korea, Brazil, Australia, New Zealand, Mexico, UK, Taiwan, etc Brazil Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Este produto no apropriado para uso em ambientes domsticos, pois poder causar interferncias eletromagnticas que obrigam o usurio a tomar medidas necessrias para minimizar estas interferncias". Para maiores informaes, consulte www.gov.br/anatel/pt-

Japan Bluetooth: MIC 218-22017 Cellular: JATE AD 19 0099 201/00 Korea: KC Certificate Registration Number: R-R-OBC-CT1000 1European Union's (EU) Directive 2002/95/EEC "Restriction of Hazardous Substances" (RoHS) in Electronic and Electrical Equipment. For Chinese and European RoHS directives. 9 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE 4. INSTALLATION INSTRUCTIONS IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING. FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY Review the product package and contents prior to beginning the installation. Take care when opening the packaging and removing items. If a return is needed, you will want to return the product in its original packaging if possible. This instruction guide is provided as a GENERAL installation guide; some assets vary dimensionally and may require additional steps. The manufacturer and / or distributors do not accept responsibility for third party charges, labor, and or third part replacement modifications. Some modifications may void the factory warranty. Exercise due diligence when installing this product. ORBCOMM does not accept any responsibility for asset damage or personal injury resulting from the installation of this product. Careless installation and operation can result in serious injury or equipment damage. All liability for installation and use rests with the owner / operator. Always make sure you have a clean, dry, and well-lit work area. Always ensure products are secure during disassembly and installation. Always take steps to protect yourself when drilling, cutting, and grinding because this may create flying particles that can cause injury. Thoroughly inspect the area to be drilled, on both sides of material, prior to modification, and relocate any objects that may become damaged. Always route electrical cables carefully. Avoid moving parts, parts that may become hot and rough, or sharp edges. Make sure to fully understand the product, its intended use, and operation prior to use. CAUTION: While ORBCOMM provides mounting hardware to assist with installations, it is the responsibility of the installer to select the proper mounting hardware for the assets surface material where an ORBCOMM device or accessory will be mounted. 4.1. Mount the CT 1000 4.1.1. Gather the Required Tools and Materials The following are required for this installation:

CT 1000 includes Alcohol based cleaner or wipes Scour pad 0.196 (5 mm) drill bits and 0.196 (5 mm) drill stop 3/16" diameter x 3/16" - 1/4" grip range (4.8 mm x 4.8 to 6.4 mm) stainless rivets Cordless drill and cordless rivet gun Tape measure Mobile phone with the ORBCOMM app 10 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL GJD113-ECERT-E- CT 1000 USER GUIDE 4.1.2. Prepare for the Installation 1. Remove the CT 1000 from the packaging. 2. Install the provided 0.196 (5.0 mm) drill bit into the drill. 3. Assemble the provided drill stop, located 3/8 (10 mm) from the end of the drill bit. 4.1.3. Prepare the Mounting Location 1. Determine the mounting location for the CT 1000 following the guidelines below:

Within the top corrugation on the right-side door Centered between the locking bars Surface must be flat, undamaged, and not have any peeling paint 2. Remove the large serial number label from the CT 1000, and then place the label next to the container number. 3. Mark the location of the corners of the CT 1000 on the asset. This is recommended for accurate prepping the asset surface. 4. Clean the surface of the corrugation (at the tape locations on the CT 1000). 4.1.4. Tape the CT 1000 to the Asset 1. Remove the tape liners from the back of the CT 1000 (two locations). CAUTION: DO NOT touch the tape. 2. Immediately place the CT 1000 onto the asset, being careful to place it on the previously marked corner locations from an earlier step. CAUTION: Ensure the device is placed near the bottom of the corrugation, with the solar panel facing up. 3. Press firmly on the entire top surface of the CT 1000 (7 kg (15 pounds) for 10 seconds) to bond the tape to the asset. 4.1.5. Install the Rivets CAUTION: DO NOT drill holes in placarded assets that are loaded. 1. Use the CT 1000 as a guide, and drill through two (2) holes with the provided 0.196" (5 mm) drill bit. 2. Assemble two (2) provided rivets through the drilled holes and install them using a rivet gun. 4.1.6. Associate the Device Use the ORBCOMM Field Support Tool (FST) mobile app to take a picture of the CT 1000, including the asset ID and the CT 1000 serial number label. 11 ORBCOMM PROPRIETARY AND CONFIDENTIAL MATERIAL

: Model No: CT 1000 [Big ORBCGMM ee No 2000 gi S/N: JJKB1225201234 F ORBCOMM Inc. 395 W. Passaic Street, Suite 325, Rochelle Park, NJ 07662 USA Made in INDONESIA +

www.orbcomm.com | Customer Service: +1 703-433-6300 IP67 WARNING - POTENTIAL ELECTROSTATIC FCC ID: XGS-BTCT2, IC: A1BBLABTCTL IP69K| CHARGING HAZARD. SEE INSTRUCTIONS. ]("\0994n-2019066621G, 7 1234 SIM ID: FFFFFFFFFFFFFFFFFFFFF Cert: ORB22ATEX1001X IECEx: 22.0001X ITS 22 ATEX: 22.0001X QD) 2.5 to 4.05 VDC, 2A MAX NUD

-20C < Ta < +70C imeree JoRe,. 2 RI [C et C_ II 3G Ex ic IIB T6 Gc| ime #: ececeecececcece

OBCO-CERT-HW220043 Rev 1.0 Oct. 24, 2022 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent FCC On our behalf, I appoint Spencer Zhong of Nemko Canada, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to act as our agent in the preparation of this application for equipment certification of CT1000 modular, Model Number CT1000. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-

Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides ORBCOMM License Corp., at 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA Dated this 24th Day of October 20 22 Agency agreement expiration date:

Oct. 23, 2023 By:

Signature Walter Sonnenfeldt Printed Title:

VP Regulatory Affairs Telephone:

1-585-461-3018 On behalf of:

ORBCOMM License Corp. 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM

OBCOCERTHW220050Rev1.0 Oct. 24, 2022 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: XGS-BTCT1 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request confidential treatment of information accompanying this application as outlined below:

PERMANENT LONG-TERM CONFIDENTIALITY:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation SHORT TERM CONFIDENTIALITY FOR A PERIOD OF 180 DAYS:

Internal Photos External Photos User Manual Test Set-up Photographs When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed:

Printed name: Walter Sonnenfeldt Title: VP Regulatory Affairs 395 W PASSAIC STREET, SUITE 325, ROCHELLE PARK, NJ 07662 USA HTTPS://WWW.ORBCOMM.COM