Congratulations on your purchase of a Bluetooth Smart heart rate monitor! Your new BLUE DUO is a TROUBLE SHOOTING + CARE & MAINTENANCE FCC Statement:
It is recommended that the grooved sensors are Heart rate doesnt display on Phone / Device
- The chest belt may not be positioned correctly.
- The grooved sensors may not be wet enough, we and try again.
-
directly on your skin. Heart rate reading on Phone / Device is
- The battery may need to be replaced in the Chest Belt.
- Sources of electromagnetic elds can cause power lines) interference. (Appliances, computers, and inconsistent or stops Avoid extreme force, shock, dust, temperature, or humidity. Such conditions may cause malfunction-
ing, a shorter electronic life span, damaged batteries, or distorted parts. Rinse the Chest Belt with fresh water to avoid materi als building up that can interfere with the reception of the pulse. Do not use abrasive or corrosive materials to clean the chest belt. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. Avoid tampering the internal components of the watch. Doing so will terminate the sensors warranty and may cause damage. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit di erent from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. authority to operate this equipment. Phone that equipped with Bluetooth Smart (BLE 4.0), monitor watch that linked with their normal chest belt at 5.3K frequency. To develop basic understand-
please read this user manual carefully. BLUE DUO wishes you an enjoyable workout with your new Chest belt. QUICK START and ush so they do not wiggle. Follow steps 1 through 5 to wear the chest belt and go for a run. Wearing the Chest Belt 1. Push tab through slot on one side of the chest belt 2. Press down until the tabs are secure under surface 3. Attach the other side around chest. Position on rib cage under the chest. Make sure the chest belt is positioned in the right direction and worn directly 4. Lift the belt slightly from the skin and wet both grooved areas on the back to ensure strong belt. 5. Start the Bluetooth device, and search for the ID of the chest belt. It will automatically connected when it found. connection between your pulse and the chest against the skin. turning it counter-clockwise. Battery Installation 1. Use a coin to unscrew the battery hatch by 2. Remove old battery and insert a CR2032 3V Lithium battery with the writing facing you. 3. Replace the battery hatch. WE STRONGLY RECOMMENDS TAKING YOUR WATCH TO A LOCAL RETAILER OR JEWELLER TO HAVE THE BATTERY REPLACED TO AVOID THE POSSIBILITY OF PERMANENTLY DAMAGING THE WATCH. FCC no.2ACEG -AY029