FCC ID: 2AVJ3-FXOT0001 FXOnTrack

1 Turning on the case Switch on the Bluetooth of your iPhone Switch on the IoT case:

Press and hold the BLE power button for 3 seconds then press the pair button for 3 seconds.

(please confirm this behavior with jasmine ) 2 Pairing the app and IOT:

Open the FXOnTrack app and place the IoT case near to your iPhone and wait for a few seconds a pairing popup screen will appear on the app screen. 3 Connecting to Bluetooth: Tap the pairing button in the pairing popup screen. The app will show the toggle message once it connected successfully. The Bluetooth icon will appear on the app dashboard screen and IOTTrack screen when IOT is connected with the app. 4 Use of the application:

The IoT tab of the app will provide you with all the aligner usage details. Every time the aligner is not in the aligner case, it will be assumed that the aligner is being used. The app will calculate the total time the aligner was used in a day, week, etc. The app will also tell you about battery charge-discharge status. 5 Recharging the IoT case:

The IoT case can be recharged using a type C USB charger. IoT case will show blue light when it is charging. when it is full blue light will turn green color.

( please confirm this behavior with jasmine)

FCC ID:2AVJ3-FXOT0001 FCC ID LABEL:

Ca. 5mm x 10mm Include in manual:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

OrthoFX Agent Authorization Company: OrthoFX Address: 48890 Milmont Dr, Suite 101D, Fremont, California, 94538, United States Product Name: FXOnTrack Model Number(s): FXOT0001, FXOT0002, FXOT0003, FXOT0004, FXOT0005 Product Description: FXOnTrack We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Title:

Date: Jan. 17, 2020 Henry Chan Chief Technology Officer Company:

OrthoFX

OrthoFX Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 17, 2020 Subject; Request for Confidentiality FCC ID: 2AVJ3-FXOT0001 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Henry Chan Title: Chief Technology Officer

Model Difference Declaration To Whom It May Concern, We, OrthoFX(FXOnTrack) Trademark:OrthoFX; Model Number:

FXOT0001, FXOT0002, FXOT0003, FXOT0004, FXOT0005;

All models the function, software and electric circuit are the same, only with a product color and model named different for commercial purpose. Test sample model: FXOT0001. Please contact me if you have any question. Name: Henry Chan Date: Jan. 17, 2020 Title: Chief Technology Officer Signature of applicant: