FCC ID: 2ADQFBEZ01D Remote telemetry communication unit

Installation Procedure Bluetooth Tank Level Indicator for Rotarex Capacitive Probes It is critical in all IMPORTANT installations to ensure monitors antenna is positioned vertically. This will achieve optimal signal strength, ensuring that you receive data in a timely manner and prolong the battery life of the monitor. PLEASE TAKE A MOMENT TO CAREFULLY READ THE INSTALLATION INSTRUCTIONS INCLUDED WITH YOUR MONITORS, AND ENSURE YOU UNDERSTAND AND RESPECT LOCAL REGULATIONS. WARNING Substitution of components may impair intrinsic safety. For outdoor use only. Explosion Hazard. Batteries are not replaceable on this device. Please contact Otodata if you need a new monitor. Under certain extreme conditions, the non-metallic parts incorporated in the enclosure of this equipment may generate an ignition-capable level of electrostatic charge. Therefore, the equipment shall not be installed in a location where the external conditions can cause build-up of electrostatic charge on such surfaces. In addition, the enclosure shall only be cleaned with a damp cloth. Do not pressure wash 7 0

1 1

3 2 0 2 0 1 0 1 C R _ M I 8 0 0 _ N E

8 5 0 0

A R G Support

+1 (514) 673-0244

+1 (844) 763-3344 (toll-free) [email protected] otodatatankmonitors.com/support Emergency Support Available 24/7 1-833-529-9499 Specifications Bluetooth tank level indicator for Rotarex capacitive probes Input Certifications Analog input from Rotarex capacitive probes type 462 or 487 Reporting & Outputs Reporting Data Interface Tank level (5% variation) Low battery High/Excessive draw Fill Detection API Email (to supplier and/or consumer) Raw data Online dashboard Client mobile app Automated Testing Network status Battery status Electrical Specifications Refer to markings label for battery pack used Radio Specifications Technologies 4G, LTE, CAT1, CATM, NB IOT, 3G Dual SIM Bluetooth Environmental Specifications Operating and storage temperature range

-40C to 60C -40F to 140F Relative humidity range 0% to 100%

Enclosure rating Warranty IP54 2 years Monitors are third-party certified by Intertek for use in hazardous locations. United States Classification: Class I, Zone 0, [AEx ia Ga] IIC T4. Conforms to UL STDs 60079-11, 60079-0, and 61010-1 Canada Classification: Class I, Division 1, Groups ABCD [Ex ia Ga] IIC T4. Certified to CSA STDs C22.2# 60079-11, 60079-0, and 61010-1-12 5028102 IECEx Classification: Ex ia IIC T4 Ga Certificate #: IECEx ETL 23.0008X Standards applied: IEC 60079-

0:2017 IEC 60079-11:2011 ATEX Classification: II 1 G Ex ia IIC T4 Ga Certificate #: ETL22ATEX0283X Standards applied: EN 60079-

0:2017 EN 60079-11:2011 ASSOCIATED APPARATUS ENTITY PARAMETERS Uo [V] = 3.9V, Io [mA] = 218mA, Po [mW] = 181mW, Co [F] =

38.98uF, Lo [H] = 188.98uH RADIO CERTIFICATIONS FCC ID: 2ADQFBEZ01D IC ID: 12649A-BEZ01D Dimensions Height Width Depth Ordering 14 cm 14 cm 9.5 cm 5.5 in 5.5 in 3.5 in TM5240BG-VA00-CNEE-RC1010*

Rotarex BT, Capacitive Probe and Gen3 Monitor RC1010 Rotarex BT, Capacitive Probe, No Monitor

*Change "CNEE" for the clients branding code if available This device complies with part 15 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is compliant with Industry Canada's RSS standards for license-exempt radio apparatuses. Authorized use depends on the following two conditions: (1) the device must not create radio interference, and (2) the device user must accept all radio interference, even if this interference could potentially impair its functioning. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To comply with FCC RF exposure compliance recommendations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 1 Device Anatomy Our handy RC1010 device was designed to fit seamlessly over a Rotarex capacitive probe and make it "smart". RC1010 will read the tank level data from the Rotarex probe and transmit the information to Otodata's powerful Bluetooth monitor

(TM5240BG) positioned nearby. The TM5240BG monitor will then transmit the level data to the cloud. RC1010 is compatible with the following Rotarex probes:

Type 487 Stand-alone Tank/Container Level Sensors Type 462 Cylinder Valves with Integrated level sensors RC1010 Rotarex Bluetooth tank level device TM5240BG Bluetooth monitor 2 Installation Instructions 1. Start clean a. Ensure the seat on the top of the probe is clean, and free of any dirt, grease, or debris. b. Locate the three contact pins in the seat and ensure they're straight and even. a b 2. Install the RC1010 device a. Verify that the O-ring is seated correctly to prevent water or dust infiltration between the devices. b. Note the position of the three holes on the bottom of the RC1010 device and carefully align them to the three pins on the inside of the seat. The asymmetrical brackets will be aligned in their respective seats. c. To avoid damaging the O-ring, gently push the RC1010 by alternating from the small asymmetrical bracket towards the large asymmetrical bracket, until the device is entirely seated (be careful not to misalign the device and damage the pins). 3 3. Secure the RC1010 device in place Using the self-threading screws provided, secure the device in place by firmly pressing downward while turning the screws clockwise. IMPORTANT DO NOT over-tighten the screws as this could damage the flange. 4. Install the TM5240BG monitor nearby a. First, locate an area no more than 25-feet from the RC1010 device to install your TM5240BG monitor. Note: To ensure optimal signal strength, this area should be free of obstructions and with a clear view to the sky. b. Install the TM5240BG monitor by magnetically mounting it to a flat, clean surface. 4 Members can watch step-by-step installation videos and shop online Sign up free today otodatatankmonitors.com/membership Members can purchase monitors and accessories like gauges, leads, mounting equipment and more via our online store. 5 T N A T R O P M I n o i t a l l a t s n i e h t d a e r y l l u f e r a c o t t n e m o m a e k a t e s a e P l u o y e r u s n e d n a

, s r o t i n o m r u o y h t i w d e d u c n l i s n o i t c u r t s n i

. s n o i t a u g e r l l a c o l t c e p s e r d n a d n a t s r e d n u

. l a n g i s t c u r t s b o l l i w s d i l l a t e M

. s d i l r e d n u

. d e t s e g g u s d i l c i t s a l P s r o t i n o m l l a t s n i t o n o D S K N A T D N U O R G R E D N U S K N A T D N U O R G

E V O B A i m u m x a m e r u s n e l l i w s n o i t c u r t s n i n o i t a l l a t s n i i g n d a e R

. s n o i t a l l a t s n i d n a s k n a t r u o y l l a n o e c n a m r o f r e p g n i r o t i n o m

1180 Rue de Louvain O, Montreal, Quebec, Canada, H4N 1G5 T: +1 (514) 673-0244 F: +1 (514) 745-8630 RC1010 Main Label

1180 Rue de Louvain O, Montreal, Quebec, Canada, H4N 1G5 T: +1 (514) 673-0244 F: +1 (514) 745-8630 RC1010 Label Location

1180 Rue de Louvain O, Montreal, Quebec, Canada, H4N 1G5 T: +1 (514) 673-0244 F: +1 (514) 745-8630 Attention: Application Examiner Re: Request for confidentiality Applicant: Otodata Wireless Network, Inc. FCC ID: 2ADQFBEZ01D To whom it may concern, Request is hereby submitted by Otodata Wireless Network, Inc. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:

Schematics Detailed Block diagrams Rationale for request for confidentiality:

Otodata Wireless Network, Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, Julien Renaud Certification Manager Otodata Wireless Network, Inc.

1180 Rue de Louvain O, Montreal, Quebec, Canada, H4N 1G5 T: +1 (514) 673-0244 F: +1 (514) 745-8630 Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts 2.903 and 2.911(d)(5)(ii) of the FCC rules Applicant: Otodata Wireless Network, Inc. FCC ID: 2ADQFBZ01D To whom it may concern, Otodata Wireless Network, Inc. (Applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part 2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing covered equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part 1.50002 and required by 47 CFR part 2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. Julien Renaud Certification Manager Otodata Wireless Network, Inc. 2023/06/21 Form: RFT-AMER-TCB-OP-19n Date: 1/25/2023 Revision: 1 Page 1 of 1

1180 Rue de Louvain O, Montreal, Quebec, Canada, H4N 1G5 T: +1 (514) 673-0244 F: +1 (514) 745-8630 June 9, 2023 Intertek Testing Services NA Ltd. 70 Codman Hill Road Boxborough, MA 01719 Subject:

Limited Agency Agreement Otodata Wireless Network, Inc. FCC ID: 2ADQFBEZ01D To Whom It May Concern:

We, Otodata Wireless Network, Inc., hereby authorized Intertek Testing Services NA Ltd to act as our Agent for the purpose of preparing application for FCC ID number 2ADQFBEZ01D under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is June 9, 2023. The Limited Agency Agreement expires on June 9, 2025, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Julien Renaud Certification Manager

CONFIDENTIAL & PROPRIETARY C033 ROTAREX BLE RC1010, C-ABS Enclosure Water resistant IP67 Long service life Easy to install Description of the system;

The C033 ROTAREX BLE transmitter is an autonomous transceiver that is used primarily for the telemetry, data transfer, Reporting. affixed to Rotarex Capacitive probe models. C033 capabilities (RC1010);

The C033 has been developed in order to provide the following functionalities. Autonomous BLE transmitter that is used primarily for the telemetry. Data transfer, Reporting, Automated Inventory management, Radio identification Internal component and circuit description. The following components are included in the C033 enclosure:

1) Single PCB board 2) Primary lithium battery The board performs all of the Radio transmit/receive control and telemetry functions as well as storage functions. The battery connects to the pcb board and is used to supply 3.6 Vdc operating voltage. Technical & RF Specifications General information Tolerances Dimensions (enclosure) Height :

Width :

Length :

51.2 mm 50.4 mm 48.1 mm Material :

Color :

ASA plastic light gray or various (RGB etc) Battery Type :

Chemistry :

Primary (non-rechargable) Lithium Thionyl chloride

(SOCl2), A-size Size:

Capacity & Voltage 2.1Ah ~ 3.6 Vdc Antenna Type: PCB Trace Operating temperature :

Environmental norm :

-40 +60C TBD Specifications (RADIO) Receiver Freq. :

Modulation :

Transmitter Freq. :

Modulation :

2402.000MHz ~ 2480.000MHz GFSK 2402.000MHz ~ 2480.000MHz GFSK Output:

2.661 mW Electrical Primary :

Internal:

3.6 Vdc 3.6 Vdc Certifications Industry Canada FCC (USA) RSS-247 Issue 2 Part 15 FCC compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. ISED compliance statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The information contained in this document is subject to change without notice and is confidential and prorpietary to Otodata Wireless Netwrok Inc.

1180 Rue de Louvain O, Montreal, Quebec, Canada, H4N 1G5 T: +1 (514) 673-0244 F: +1 (514) 745-8630 Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both Otodata Technologies USA (Agent) and Otodata Wireless Network, Inc.

(Applicant) acknowledge consent to obligations of each party pursuant to 47 CFR part 2.911(d)(7) of the FCC rules in regard to the agent for service of process. I Julien Renaud HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name Contact Name Address Telephone No Email Applicant FRN

: Otodata Wireless Network, Inc.

: Julien Renaud

: 1180 Rue de Louvain Ouest, Montreal, Quebec, Canada, H4N 1G5

: 514-673-0244 #432

: [email protected]

: 0024127557 Signature: ____________________________________ Date:

____________________________________ I Eric Wise HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to all certification applications to the FCC submitted by above applicant and agree to immediately notify the FCC and Intertek if there is change in this representation. Agent Company Name Contact Name Address Telephone No Email Agent FRN

: Otodata Technologies USA

: Eric Wise

: 130 Technology Dr, Canonsburg, PA 15317-9563 US

: 1 (412) 779-9998

: [email protected]

: N/A Signature: ____________________________________ Date:

____________________________________ Form: RFT-AMER-TCB-OP-19o Date: 1/25/2023 Revision: 1 Page 1 of 1 2023/08/01August 1, 2023