(50.8mm) 2 POWER PACK QUICK START GUIDE COMPLETE USERS MANUAL OTTERBOX.COM/SAFETY-INSTRUCTIONS DE Gesamtes Benutzerhandbuch IT Manuale Utente Completo ES Manual de Usuario Completo PT Manual do Utilizador Completo SV Fullstndig Anvndarhandbok JA KO ZHT ZH HE
20-53713_A WIRELESSLY CHARGE DEVICES (IF APPLICABLE) Press button and place your device flat on the side of the Power Pack featuring the OtterBox logo. A green light blinks while detecting your device and stops blinking after 30 seconds if the device is not detected. If the green light does not blink, repeat the first step by pressing the button and placing your device on the Power Pack. The green light stays solid when a device is connected and charging. CARE & MAINTENANCE CLEANING 1. Wipe with a dry cloth. 2. Do not use solvents, chemicals, cleaning solutions, alcohol, ammonia or abrasives. CUSTOMER SERVICE 1-855-688-7269 USA + Canada - Toll Free support@otterbox.com otterbox.com/support 4
(101.6mm) FULLY CHARGE FOR FIRST USE While charging display continually shows (Fig. 1):
FIG. 1 1 flashing LED < 25% capacity 1 solid LED, 1 flashing LED 25-50% capacity 2 solid LEDs, 1 flashing LED 50-75% capacity 3 solid LEDs, 1 flashing LED 75-99% capacity 4 solid LEDs 100% capacity When not charging, press button to view capacity
(displays for approximately 30 seconds) (Fig. 2):
FIG. 2 FIG. 2 No LEDs 0% capacity 1 flashing LED 0-3% capacity 1 solid LED 3-25% capacity 2 solid LEDs 25-50% capacity 3 solid LEDs 50-75% capacity 4 solid LEDs 75-100% capacity CHARGE DEVICES Power Pack automatically starts charging most devices. In the case of a completely dead device or small devices like headphones and wearables, rapidly press button twice to turn on manual output. LEDs continually cycle while in manual output mode and the output stays on for 2 hours. Press button once to return to normal/auto mode (Fig. 2). 6
(152.4mm) Lorsque la batterie nest pas en cours de chargement, appuyez sur le bouton pour afficher la capacit, visible environ 30secondes (illustration n2):
ILLUSTRATION N 2 Aucun voyant DEL allum capacit de 0 %
1 voyant DEL clignotant capacit de 0-3 %
1 voyant DEL allum en continu capacit de 3-25%
2 voyants DEL allums en continu capacit de 25-50 %
3 voyants DEL allums en continu capacit de 50-75 %
4 voyants DEL allums en continu capacit de 75-100 %
Un voyant vert clignote pour dtecter votre appareil et cesse de clignoter aprs 30secondes si lappareil nest pas dtect. Si le voyant vert ne clignote pas, rptez la premire tape en appuyant sur le bouton et en positionnant votre appareil sur le bloc dalimentation. Le voyant vert est allum en continu lorsquun appareil est connect et en charge. ENTRETIEN NETTOYAGE 1. Essuyer le produit avec un chiffon sec 2. Nutilisez pas de solvants, de produits chimiques, de solutions de nettoyage, dalcool, dammoniaque ou de composants abrasifs. POWER PACK GUIDE DE DMARRAGE RAPIDE POUR ACCDER CE MANUEL DANS UNE AUTRE LANGUE, RENDEZ-VOUS SUR OTTERBOX.COM/SAFETY-INSTRUCTIONS CHARGEMENT COMPLET POUR UNE PREMIRE UTILISATION Pendant le chargement, lcran affiche en permanence (illustration n 1) :
1 voyant DEL clignotant < 25 % de capacit 1 voyant DEL allum en continu, 1 voyant DEL clignotant capacit de 25-50 %
2 voyants DEL allums en continu, 1 voyant DEL clignotant capacit de 50-75 %
3 voyants DEL allums en continu, 1 voyant DEL clignotant capacit de 75-99 %
4 voyants DEL allums en continu capacit de 100 %
ILLUSTRATION N 1 APPAREILS CHARGS Power Pack commence automatiquement charger la plupart des appareils. Dans le cas dun appareil compltement dcharg ou de petits appareils comme des couteurs ou des portables, appuyez rapidement sur le bouton deux fois pour activer la sortie manuelle. Les voyants DEL sallument continuellement tour de rle lors de lutilisation de la sortie manuelle et la sortie reste active durant deux heures. Appuyez une fois sur le bouton pour revenir en mode normal/auto (illustration n2). DISPOSITIFS DE CHARGE SANS FIL
(SI APPLICABLE) Appuyez sur le bouton et placez votre appareil plat sur le ct du bloc dalimentation arborant le logo OtterBox. SERVICE LA CLIENTLE 1-855-688-7269
.-U. + Canada - Gratuit support@otterbox.com otterbox.com/support Project Name: INSERT INSTRUCTIONAL POWER PACKS GLOBAL Page: 1 Part #: 20-53713 Rev: A Dieline and material shall follow: (See Notes) Colors Coatings and Treatments:
Colors Coatings and Treatments:
Process Black Process Black PMS 109 PMS 109 Notes:
Accordian fold NOT FOR PRINT -
FOR REFERENCE ONLY Dielines-
do not print Folds-
do not print t S e p 1 POWER PACK t S e p 2 Notes: 2x2 Fold i F n a l POWER PACK FCC Caution 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ISED Caution
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause in terference, and (2) This device must accept any interference, including interference th at may cause undesired operation of the device.
- French:
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.