Quick manual Beacon Beacon Getting Started The Basics Calibration OWiN Beacon is a device to make your car smarter. This Quick Start Guide will inform you on how to experience a whole new lifestyle right from your car seat in simple and easy steps. Experience with OWiN. owin.kr facebook.com/owinauto 01 Scan the QR Code on the package and pair with your phone. Enable your bluetooth for the pairing. 02 When you plug in OWiN Beacon in the car, it automatically turns on. For the best performance, please place it so that the logo faces upwards. POWER SWITCH USB C-TYPE CHARGER
(4.2V/2A) LED STATUS LIGHT METALLIC BODY 1m 1m 1m 1m For the best possible state of your OWiN Beacons signals, please plug in your OWiN Beacon and turn on the calibration screen on your phone. Press Okay from about 1m of the 4 sides of your vehicle. Product Specications Resources Power DC 12V (vehicle source) Frequency Range Antenna USB Charging Power Battery Temperature Size Weight 2402 ~ 2480 MHz Internal Antenna 4.2V/1.8A 55mAh (Li-Polymer)
-10 ~55C 30.00, 61.99mm Under Modication (TBD) If there are any problem with the product or you find yourself in need of any support, please refer to the below. Web owin.kr Contact faq@owin.kr 070 4282 7845 facebook.com/owinauto _This radio equipment contains possibility relating to signal mix-up, making it unsuitable for life-saving activities. _This electromagnetic compatibility device is Class B, and is mainly for use at home. Beacon Quick manual FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
erent from that to which the receiver is con-
nected.
ed radio/TV technician for help. Caution
sponsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.