Owlet IoT Wireless Outdoor Luminaire Controller LUCO P7 CM (cellular-mesh) Datasheet Streetlight controls for smart cities based on IoT Technology The LUCO P7 CM Luminaire Controller is a smart control module that monitors and controls LED or HID luminaires. It is designed for easy installation and plug and play commissioning. Twist and lock the LUCO P7 CM onto the 5 or 7 pin NEMA socket and your system is ready to go:
Auto-commissioning Auto-connectivity GPS-location Sensors enabled Asset management DALI and 1-10V Driver Support Integrated powermeter with 1% accuracy (0-100% Dimming) Applications The LUCO P7 CM controls LED drivers and ballasts as per the wiring diagrams (A). It is designed to replace a standard NEMA photocell (on a 5 or 7 pin socket) for use in outdoor luminaires for residential, road and urban applications. General operation The LUCO P7 CM is designed to execute Plug and Play commissioning with instant connectivity over the existing cellular infrastructure without any need for an additional gateway or IT structure. Each controller can communicate in two independent ways, cellular and RF-Mesh, offering instant, robust, reliable and flexible connectivity. A Communication between the luminaires, for exchanging sensor information for example, is done through a fast IPv6 based self-
forming RF mesh net, where one controller in the mesh also acts as a router module for the neighbouring controllers through the Central Management System. GROUND
( - DIMMING,
- DALI, - SENSOR)
+ DIMMING,
+ DALI Asset-management An ID reader reads out the asset information stored in the lumi-
naire tag for further use in the Central Management System asset application. 3 0 0
. 0 1
. 8 2 4
. 3 _ M C 7 P
-
o C u L _ S D _ W O Luminaire Controller LUCO P7 CM 1 4
. 2
/
m m 0 2
. 1 6 A 89.2 mm / 3.51 NEMA Twist lock (top view) ANSI C 136.41 LOAD (RED) SENSOR INPUT SENSOR POWER SUPPLY N LIVE (BLACK) NEUTRAL (WHITE) NEMA Socket is not supplied with LUCO P7 CM Owlet 2016 | Data subject to change | www.schreder.com Owlet IoT Wireless Outdoor Luminaire Controller LUCO P7 CM (cellular-mesh) Datasheet LUCO P7 CM Auto-Commissioning Due to its built-in GPS and cellular module the LUCO P7 CM supports auto-commissioning and auto-connectivity. Owlet controllers with GPS will automatically be imported and located in the Owlet IoT user interface. Standards & Legislation Approvals EMC Cellular Radio GPS RF-ID Operating conditions Ambient temperature (ta) Relative humidity Non-operating conditions Temperature
-40C to +65C
-40F to 149F 10% to 90%
-40C to +80C
-40F to 175 F 5% to 90%
110-277VAC 10%
50/60 Hz 5%
5 A 600VA@120V, 1.2kVA@240V, 1.38kVA@277V Required external fuse 10A Relative humidity Mains connection Mains voltage Mains frequency Maximum load current Maximum power at 5A Power consumption Stand-by wattage Operating wattage Integrated powermeter accuracy Radio Frequency Protocol Frequency band Housing Material Colour Protection class
< 1.0W
< 2.7W 1% and better
(between 0% and 100% dimming) IPv6 2.4 GHz ( 2400,02483,5 MHz) Safety PC, UV stabilized RAL 7042 translucent light grey IP 66
(installed condition for controller only in combination with TE PN: 2213362) R&TTE directive 1999/5/EC EMC directive 2004/108/EC LV directive 2006/95/EC RoHS directive 2002/95/EC EN 301 489-1 V1.9.2:2011-09 EN 301 489-3 V1.6.1:2013-08 EN 301 489-7 V1.3.1:2005-11 EN 301 489-17 V2.2.1:2012-09 EN 301 489-24 V1.5.1:2010-10 FCC/IC part 15B, ICES-003 (ANSI/IEEE C63.4:2014) EN 301 511 V9.0.2:2003-03 EN 301 908-1 V7.1.1 2015-03 FCC/IC RSS-132, Issue 3, January 2013 FCC/IC RSS-133, Issue 6, January 2013 FCC/IC RSS-139, Issue 3, July 2015 FCC/IC RSS-247, Issue 1, May 2015 FCC/IC 47 CFR Part 22 Subpart H FCC/IC 47 CFR Part 24 Subpart E FCC/IC 47 CFR Part 27 Subpart C EN 300 328 V1.9.1:2015-02 EN 300 440-2 V1.4.1:2010-08 FCC/IC 47 CFR Part 15 Subpart C 15.247;
EN 300 330-2 V1.6.1:2015-03 FCC/IC 47 CFR Part 15 Subpart C 15.225 FCC/IC RSS-210, Issue 8, December 2010 +
Amendment 1, February 2015 IEC 61347-1 :2008+A1:2011+A2:2013 IEC 61347-2-11 EN 60950-22:2006+AC:2008 EN 60529:1991+A1:2000+AC:1993+A2:2013 EN 62311:2008 UL 773 (E359906) C22.2 No. 182.2-M1987 CSA C22.2 No. 205-12 FCC/IC 47 CFR Part 2 Subpart J 2.1091 FCC/IC RSS-102, Issue 5, March 2015
( FCC ID: 2AIOB-LCP7CM, IC. 21585-LCP7CM) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harm-
ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. DALI output Interface DALI Compliant to IEC62386 part 101, 102, 201, 203, 207 Load capacity Protection DALI voltage DALI supply current 8 DALI drivers Interface is short circuit protected 12.0 to 20.5Vdc max. 16 mA 1-10V interface Compliant to 1-10VDC IEC60929 (Annex E) Load capacity Load current 8 1-10V drivers Interface is current sinking, max. 16mA E359906 FCC ID: 2AIOB-LCP7CM IC. 21585-LCP7CM Owlet 2016 | Data subject to change | www.schreder.com Connector ANSI C136.41, ANSI C136.10 Sensor Power Supply 12 Vdc 0.5 V, 2 mA max. GPS Capabilities Supports GPS system (L1C/A signals provided at 1575.42 MHz) Supports SBAS, Satellite Based Assist System Position accuracy upto 2.5m/ 8 ft (with > 6 satellites) 3 0 0
. 0 1
. 8 2 4
. 3 _ M C 7 P
-
o C u L _ S D _ W O