FCC ID: 2AGV2TALTIL Portable Lamp

TALIA ADJUSTABILITY USB USB SPECIFICATIONS TABLETS AND OTHER MOBILE DEVICES. CORD REQUIRED (CORD NOT INCLUDED) OUTPUT VOLTAGE: 5VDC + - 5%

OUTPUT CURRENT: 1A MAX SINGLE 5.0V USB OUTPUT SUPPORTS CHARGING FOR SMARTPHONES, TALIA WILL CONTINUE TO CHARGE YOUR MOBILE DEVICE EVEN WHEN LAMP IS IN THE OFF POSITION. PLEASE REFER TO YOUR MOBILE DEVICES USER MANUAL FOR COMPATIBILITY AND CHARGING TIME. PLEASE REFRAIN FROM LEAVING YOUR DEVICE PLUGGES IN FOR LONGER THAN THE RECOMMENDED TIME, OTHERWISE IS MAY RESULT IN OVER CHARGING. CARE INSTRUCTIONS WIPE CLEAN WITH A SOFT DAMP CLOTH. AVOID AMMONIA-BASED CLEANERS INFO@PABLODESIGNS.COM 888 MARIN STREET, SAN FRANCISCO, CA 94124 PABLODESIGNS.COM pg. 3 TALIA TABLE & FLOOR ASSEMBLY INSTRUCTIONS AND USER GUIDE INFO@PABLODESIGNS.COM 888 MARIN STREET SAN FRANCISCO, CA 94124 PABLODESIGNS.COM TALIA TALIA ASSEMBLY FEATURES FULL RANGE OPTICAL SWITCH TAP OPTICAL SWITCH BRIEFLY TO CYCLE THROUGH HIGH (100%), LOW

(40%), AND OFF. PRESS AND HOLD OPTICAL SWITCH TO ACTIVATE FULL RANGE DIM CONTROL (RELEASE WHEN DESIRED LEVEL IS REACHED). 6 HOUR AUTO OFF SETTING WHILE LIGHT IS TURNED OFF, PRESS AND HOLD SWITCH FOR 6 SECONDS UNTIL THE LIGHT FLASHES ONCE. THEN PRESS THE SWITCH AGAIN TO TURN ON. THE LIGHT POWERS OFF AFTER 6 HOURS. NOTE:

TO DISABLE AUTO-SHUTOFF, REVERSE PROCEDURE. NOTE: CENTER DEVICE CHARGE COIL OVER LINE SYMBOL FOR BEST RESULT. WIRELESS CHARGING ZONE NOTE: TABLE MODEL ONLY PUSH AND TWIST PLUG INTO POWER SUPPLY. PUSH BUTTON TO REMOVE PLUG. CONNECT LAMP CORD TO POWER SUPPLY. LOCATING FEATURE pg. 1 pg. 2

TILE FEATURES CONTD SINGLE 5.0V USB OUTPUT SUPPORTS CHARGING FOR SMARTPHONES, USB SPECIFICATIONS TABLETS AND OTHER MOBILE DEVICES. CORD REQUIRED (CORD NOT INCLUDED) OUTPUT VOLTAGE: 5VDC + - 5%

OUTPUT CURRENT: 1A MAX TILE WILL CONTINUE TO CHARGE YOUR MOBILE DEVICE EVEN WHEN LAMP IS IN THE OFF POSITION. PLEASE REFER TO YOUR MOBILE DEVICES USER MANUAL FOR COMPATIBILITY AND CHARGING TIME. PLEASE REFRAIN FROM LEAVING YOUR DEVICE PLUGGES IN FOR LONGER THAN THE RECOMMENDED TIME, OTHERWISE IS MAY RESULT IN OVER CHARGING. CARE INSTRUCTIONS WIPE CLEAN WITH A SOFT DAMP CLOTH. AVOID AMMONIA-BASED CLEANERS INFO@PABLODESIGNS.COM 888 MARIN STREET, SAN FRANCISCO, CA 94124 PABLODESIGNS.COM pg. 3 USB TILE ASSEMBLY INSTRUCTIONS AND USER GUIDE INFO@PABLODESIGNS.COM 888 MARIN STREET SAN FRANCISCO, CA 94124 PABLODESIGNS.COM TILE TILE ASSEMBLY FEATURES PUSH AND TWIST PLUG INTO POWER SUPPLY. PUSH BUTTON TO REMOVE PLUG. CONNECT LAMP CORD TO POWER SUPPLY. FULL RANGE OPTICAL SWITCH TAP OPTICAL SWITCH BRIEFLY TO CYCLE THROUGH HIGH (100%), LOW (50%), AND OFF. PRESS AND HOLD OPTICAL SWITCH TO ACTIVATE FULL RANGE DIM CONTROL (RELEASE WHEN DESIRED LEVEL IS REACHED). 6 HOUR AUTO OFF SETTING WHILE LIGHT IS TURNED OFF, PRESS AND HOLD SWITCH FOR 6 SECONDS UNTIL THE LIGHT FLASHES ONCE. THEN PRESS THE SWITCH AGAIN TO TURN ON. THE LIGHT POWERS OFF AFTER 6 HOURS. NOTE: TO DISABLE AUTO-SHUTOFF, REVERSE PROCEDURE. WIRELESS CHARGING ZONES ADJUSTABILITY pg. 1 pg. 2 NOTE: CENTER DEVICE CHARGE COIL OVER LINE SYMBOL FOR BEST RESULT.

Talia USB Output: 5V/1A MAX Tile USB Output: 5V/1A MAX FCC ID: 2AGV2TALTIL IC: 20979-TALTIL FCC ID: 2AGV2TALTIL IC: 20979-TALTIL Label

Cover Letter for Wireless Charger Data:2020-7-8 Dear Sir/Madam, Theres a ___Portable Lamp__that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below Wireless Charger with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5 b) requirements. Applicant:

Pablo Inc Product Description:

Portable Lamp Model No:

FCC ID:

Talia, Tile 2AGV2TALTIL Requirement 1) Power transfer frequency is less than 1 MHz 2) Output power from each primary coil is less than 15 watts 3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils 4) Client device is inserted in or placed directly in contact with the transmitter 5) Mobile exposure conditions only 6) Aggregate leakage fields at 15 cm surrounding the device and 20cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, By:

Technical 110-205kHz 5W Model Talia contains one wireless charging module, while model Tile contains two wireless charging modules. Each module contains only one coil. Placed directly in transmitter Mobile Result Complied Complied Complied Complied Complied

Complied

Date: July 31, 2020 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Intertek Testing Services Shanghai is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b). to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.91 1(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: ____July 21, 2021 By: = oS James Bolton

(Signature!) (Print name) Title: Director of Operations On behalf of: Pablo Inc. __ (Company Name) Telephone: 415-653-1927 888 Marin Street San Francisco, CA 94124 w (418) 865-5000 # (415) 865-0500 www.pablodesigns.com

Pablo Request_for Confidenti Date: July 31, 2020 Subject: Confidentiality Request for: FCC 1D: 2AGV2TALTII Pursuant to FCC 47 CFR 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential, Type of Confidentiality Requested Exhibit LU Short Term WW Permanent Block Diagrams O Short Term External Photos O Shor Term Gi Permanent ** Intemal Photos O Short Term & Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM O Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics D Shon Term Test Setup Photos O Short Term 1 Permanent * Users Manual Pablo Inc___has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product, Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public, Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __45___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: James Bolton

(Signature/Title (Print name)

~The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for DO1 found at:

hnps://apps.fee.govioetet kat forms TS: esultPage.cfim switeh=P&cid=41731 and review section II, 3) regarding specific information that must accompany these requests.

+ Must de signed by appiicant comet given tor uppiicant on he FCC site, or by the authorized ugent i an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 888 Marin Street San Francisco, CA 94124 w (415) 865-5000 f (415) 865-0500 www.pablodesigns.com

Pablo Inc Declaration of Model Difference We Pablo Inc hereby certify that:

Talia, Tile has the same wireless charging module and USB connector, Talia has one wireless charging module and Tile has two wireless charging modules. By: