all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Revised Manual | Users Manual | 1.60 MiB | October 01 2003 / September 01 2003 | |||
1 | External Photos | September 01 2003 | ||||||
1 | ID Label/Location Info | September 01 2003 | ||||||
1 | Internal Photos | September 01 2003 | ||||||
1 | Cover Letter(s) | September 01 2003 | ||||||
1 | Test Setup Photos | / September 01 2003 | ||||||
1 | Test Report | September 01 2003 |
1 | Revised Manual | Users Manual | 1.60 MiB | October 01 2003 / September 01 2003 |
Easikey 1000 Installation and User Guide 17047 Ver 1.8 DRAFT C January 2003 PAC INTERNATIONAL LTD, 1 Park Gate Close, Bredbury, Stockport, SK6 2SZ, England Tel: +44 (0) 161 406 3400. Fax: +44 (0) 161 430 8658 www.pac.co.uk Issue Record Version 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Date 0ct 95 Nov 95 Oct 96 Jun 98 Apr 99 Feb 00 Nov 00 Aug 01 Jan 03 Software V1.0 V1.0 V1.02 V1.13 V1.13 V1.13 V1.13 V1.13 V1.13 Details Original Release Update PSU descriptions Changes to PCB and new boxed versions Updates to text and format Change to Personnel printout Updates to text, fuse rating updated Update to power supply diagram, 12V power supply to reader, printer terminal block used for upload/download Easikey 1000 Plus note added, DCIN connector added to Figure 1, 3A power supply on Figure 3, Figure 4 improved. RFID and FCC notices added 17047 Ver 1.8 DRAFT C ii Easikey 1000 Version 1.8 Changes are periodically made to the product, these changes will be incorporated into new editions of this manual. PAC INTERNATIONAL LTD shall not be liable for errors contained herein or for any consequential damages connected with the use of this material. Copyright and Protective Notices 1. The copyright of this document and the associated drawings is the property of PAC INTERNATIONAL LTD, and is issued on condition that it is not copied, reprinted or reproduced, nor its contents disclosed, either wholly or in part, without the consent in writing of, or in accordance with the conditions of a contract with PAC INTERNATIONAL LTD. January 2003 2. The publication of information in this document does not imply freedom from patent or other protective rights of PAC INTERNATIONAL LTD, or others. 3. Performance figures and data quoted in this document are typical, and must be specifically confirmed by PAC INTERNATIONAL LTD before they become applicable to any tender, order or contract. Trademarks Easikey is a registered trademark of PAC INTERNATIONAL LTD. Training and Technical Support Training courses covering the installation and use of all PAC products are regularly held at PAC INTERNATIONAL LTD, Stockport. For further information on course availability, or to discuss your specific requirements, contact the Training Manager at the address below. It is strongly recommended that any persons installing or commissioning PAC products attend a suitable training course beforehand. Technical Support for all PAC products is available during normal office hours:
8:00am to 6:00pm Monday to Friday, excluding public holidays. International +44 161 406 3400 Tel: 0161 406 3400 Fax: 0161 430 8658 International +44 161 430 8658 This service is provided primarily for the use of trained engineers. End users of PAC products should first of all contact their installation or maintenance company before contacting PAC. PAC INTERNATIONAL LTD 1 Park Gate Close Bredbury Stockport SK6 2SZ England 17047 Ver 1.8 DRAFT C iii Easikey 1000 IMPORTANT:
When installing the PAC equipment the following should be noted:
HEALTH AND SAFETY Installation must wired in accordance with National Wiring Regulations (BS7671, IEE National Wiring Regulations in the UK). Failure to do so can result in injury or death by electric shock. It must also comply with any local Fire, Health and Safety regulations. A secured door that may be part of an escape route from an area must be fitted with:
A fail-safe lock (A). So that the door will be released if the power fails. Ideally a magnetic lock should be used as these are less likely to jam or seize. A normally-closed break-glass or manual pull (B) in the lock supply wiring. So that in an emergency the fail-safe lock can be immediately depowered. B A The controller must be earthed. Isolate the controller supply before working on the controller. CABLING The cabling used in the PAC Access Control Systems (six wire bus, reader cables, etc.) are not prone to electrical interference. However, you should avoid routing cable close to heavy load switching cables and equipment. If this is unavoidable, cross the cable at right angles every 3.3-6.6ft/1-2m to reduce the interference. RFID Devices As similar RFID technology is now widely used in a number of other industries, for example automotive immobilisers, it is possible that interaction between your access control ID and other devices may cause one or the other to function incorrectly. Should you suspect that you have experienced such a problem the solution is to separate your access control ID from other RFID devices. FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID OQL-EK-1000P Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 17047 Ver 1.8 DRAFT C iv Easikey 1000 Table of Contents 1.1 The Installation or Maintenance Engineer...........................................................................1 1.2 The User of the System.......................................................................................................1 2.1 Introduction ..........................................................................................................................2 2.2 How it Works........................................................................................................................2 2.3 Features...............................................................................................................................2 2.3.1 Access Points.............................................................................................................2 2.3.2 Personnel ...................................................................................................................2 2.3.3 Door Monitoring Alarms..............................................................................................3 2.3.4 Time Profiles...............................................................................................................3 2.3.5 Printer Facilities..........................................................................................................3 3.1 Introduction ..........................................................................................................................4 3.2 Closed Box Version...........................................................................................................5 3.3 Open Box Version .............................................................................................................6 3.4 Power Supply.......................................................................................................................7 3.4.1 Fuses..........................................................................................................................7 3.5 Power Supply Connections .................................................................................................7 3.6 Battery Backup ....................................................................................................................8 3.7 Fitting the Controller ............................................................................................................8 3.8 External Readers.................................................................................................................8 3.9 Printer ..................................................................................................................................8 3.9.1 Printer Specification ...................................................................................................8 3.9.2 Printer Cable...............................................................................................................8 4.1 Readers ...............................................................................................................................9 4.1.1 Proximity Reader Wiring.............................................................................................9 4.1.2 PIN Reader Wiring .....................................................................................................9 4.1.3 Magstripe Reader Wiring..........................................................................................10 4.1.4 Wiegand Readers Wiring .........................................................................................10 4.1.5 AVR Reader Wiring ..................................................................................................12 4.1.6 Reader Fitting...........................................................................................................12 4.1.7 Reader Cabling ........................................................................................................12 4.1.8 Reader Connections.................................................................................................13 4.2 Request to Exit (RTE)........................................................................................................13 4.2.1 Wiring Detail .............................................................................................................13 4.3 Door Contact (DC).............................................................................................................14 4.3.1 Lock Output ..............................................................................................................14 4.3.2 Lock Suppression.....................................................................................................14 4.3.3 Safety .......................................................................................................................14 5.1 Wiring Detail ......................................................................................................................15 5.2 Door Contact Monitoring....................................................................................................15 5.3 Cable/Reader Anti-Tamper................................................................................................16 5.4 Alarm Output Relay ...........................................................................................................16 5.5 Emergency Override/Free Exit ..........................................................................................17 5.5.1 Emergency Override ................................................................................................17 5.5.2 Free Exit ...................................................................................................................17 6.1 Switching On......................................................................................................................18 6.2 Installing the Master Key ...................................................................................................18 6.3 Replacing the Master Key .................................................................................................19 7.1 Description of Parameters .................................................................................................20 7.1.1 Lock Release Time...................................................................................................20 7.1.2 Door Open Time.......................................................................................................20 17047 Ver 1.8 DRAFT C v Easikey 1000 7.1.3 Door Time Profile .....................................................................................................20 7.1.4 Door Options ............................................................................................................20 7.2 The DOORS/6 Function ....................................................................................................21 8.1 Setting the Clock................................................................................................................22 8.2 Upload/Download ..............................................................................................................22 8.3 Editor Keys ........................................................................................................................23 8.4 Channel Interlock...............................................................................................................23 8.5 Anti-Passback....................................................................................................................24 8.6 Software Version Display ..................................................................................................24 9.1 The Controller Keypad and Display...................................................................................25 9.2 Editor Keys ........................................................................................................................25 9.3 How to use an Editor Key ..................................................................................................26 9.3.1 Entering Data............................................................................................................26 9.3.2 Editor Time-Out ........................................................................................................26 10.1 Power Indicators..............................................................................................................27 10.2 Normal Displays...............................................................................................................27 10.3 Door Left Open Warning..................................................................................................27 10.4 Unauthorised Access Alarm ............................................................................................28 10.5 Duress Alarm...................................................................................................................28 10.6 Cable or Reader Tamper Alarm ......................................................................................29 10.7 Alarm Relays ...................................................................................................................29 11.1 Key Numbers...................................................................................................................30 11.2 Access Levels and Time Profiles.....................................................................................30 11.2.1 Access Levels ........................................................................................................30 11.2.2 Time Profiles...........................................................................................................30 11.2.3 Adding a New Key..................................................................................................31 11.3 Adding Several Keys .......................................................................................................32 11.4 Editing a Key....................................................................................................................32 11.5 Voiding a Key...................................................................................................................33 11.6 Identifying a Key ..............................................................................................................33 12.1 How They Work ...............................................................................................................34 12.2 How to Set Time Profiles .................................................................................................35 13.1 Adding an Editor Key.......................................................................................................38 13.2 Voiding an Editor Key ......................................................................................................38 14.1 Setting the Clock..............................................................................................................39 14.2 Display PIN ......................................................................................................................39 14.3 Display Last Five Keys Used...........................................................................................39 14.4 Manual Lock and Unlock .................................................................................................39 14.4.1 Doors Controlled by a Time Profile ........................................................................39 14.4.2 Doors not Controlled by a Time Profile ..................................................................39 14.4.3 To Lock/Unlock a Door...........................................................................................40 14.5 Printer Functions..............................................................................................................40 14.5.1 Transaction Logging...............................................................................................40 14.5.2 User Selected Reports ...........................................................................................41 14.5.3 Printing the Database:............................................................................................41 14.5.4 Printing Selected Key Transactions .......................................................................42 14.5.5 Clearing the Transaction Memory..........................................................................42 16.1 Introduction ......................................................................................................................44 16.2 Magstripe Readers ..........................................................................................................44 16.3 PIN Readers ....................................................................................................................44 16.4 AVR Readers...................................................................................................................45 16.5 Wiegand Readers............................................................................................................45 16.6 Keys.................................................................................................................................45 17047 Ver 1.8 DRAFT C vi Easikey 1000 Table of Figures Figure 1 Easikey 1000 Controller .................................................................................................. 4 Figure 2 Closed Boxed Easikey 1000......................................................................................... 5 Figure 3 Open Boxed Easikey 1000 ........................................................................................... 6 Figure 4 Power Supply Connections ............................................................................................. 7 Figure 5 Proximity Reader Wiring Diagram................................................................................... 9 Figure 6 PIN Reader Wiring Diagram............................................................................................ 9 Figure 7 Magnetic Stripe Reader Wiring Diagram.......................................................................10 Figure 8 Easikey 1000 Controller to Wiegand Interface Wiring Diagram....................................11 Figure 9 PAC Wiegand Interface to Wiegand Device Wiring Diagram .......................................11 Figure 10 Typical Wiegand Device Wiring Diagram....................................................................11 Figure 11 AVR Reader Wiring Diagram ......................................................................................12 Figure 12 Request to Exit Wiring Diagram ..................................................................................13 Figure 13 Lock Output Wiring Diagram .......................................................................................14 Figure 14 Door Monitoring and/or Tamper Detection Wiring Diagram........................................15 Figure 15 Emergency Override/Free Exit Wiring Diagram..........................................................17 Figure 16 Controller Keypad and Display....................................................................................25 Figure 17 How the System Displays Access Level and Time Profile When Adding a Key.........30 Figure 18 Sample Display ...........................................................................................................39 17047 Ver 1.8 DRAFT C vii Easikey 1000 Identity Abbreviations Used in this Document AVR Automatic Vehicle Recognition alternating current ac dc direct current DC Door Contact DCIN Direct Current In CTS Clear to Send DTR Delay Transmit/Receive GND Ground EMF Electro-Motive Force ID LED Light Emitting Diode MOV Metal Oxide Varistor N/C Normally Closed N/O Normally Open PIN Personal Identity Number PSU Power Supply Unit RTE Request to Exit RX Receive SIG Signal TMP Tamper TX Transmit VCA Valid Code Accepted VE Voltage Entry 17047 Ver 1.8 DRAFT C viii Easikey 1000 About this Document 21446 21448 21450 21452 21453 1. About this Document This document covers the installation and use of the Easikey 1000 door controller. The following versions are available:
Easikey 1000 Closed Boxed Easikey 1000 with 3A PSU Closed Boxed Easikey 1000 with 1.5A PSU Open Boxed Easikey 1000 with 3A dc PSU Open Boxed Easikey 1000 with 1.5A ac PSU This document is designed to be used by both the installation or maintenance engineer and the end user who administers the system on a day to day basis. 1.1 The Installation or Maintenance Engineer The first part of this document describes how to install, commission and maintain the system. All engineers working on the Easikey 1000 should be familiar with the following sections:
2 The Easikey 1000. Describes how the system works and its various features. Read this first as it will help you understand the system. Installation of the Controller. Describes power supply requirements (including battery backup), controller siting and fitting for both the Easikey 1000 and the Boxed Easikey 1000. Installing Readers and Lock. Describes the fitting of PAC readers, Request to Exit switches and lock requirements. The use of PIN, Wiegand, AVR and Magstripe readers are also described. Door Monitoring and Alarm Relays. Describes door monitoring and alarm relay facilities. Setting Up the System. Describes how to install or change the master key, set the system clock and set the door data, and checking the system to ensure all facilities are working. Setting the Door Data. Describes how to set up lock release time, door left open time, apply time profiles and door options, etc. Installer Facilities. Describes upload/download, anti-passback, etc. System Administration. Describes the use of editor keys. 8 9 1.2 The User of the System The second part of this manual is aimed at the end user who should become familiar with the following sections:
2 3 4 5 6 7 The Easikey 1000. Describes how the system works and its various features, not all of which may be implemented in your system. Read this first as it will help you understand your system. System Administration. Describes the use of editor keys. Displays and Alarms. Describes the displays which may appear during normal operation of the system. Adding and Voiding Keys. Describes the most common activities of key administration. There are step-by-step instructions on how to add and remove keys from the system. Time Profiles. Description of time profiles, how they are used and how to program them. Editor Keys. Description of how to administer the keys that allow changes to be made to the system. Other Functions. Describes some of the less frequently used actions such as setting the clock, manually opening or closing a door and the printer facilities. 9 10 11 12 13 14 17047 Ver 1.8 DRAFT C 1 Easikey 1000 The Easikey 1000 2. The Easikey 1000 2.1 Introduction The Easikey 1000 is a two door access control system using PAC's proximity key technology. The complete system consists of a door controller with a key pad and display, one or two door readers sited at the controlled doors and a number of PAC electronic keys - PAC's electronic key, proximity card, Magstripe card, PIN reader or Wiegand device. It can also be used with PAC's AVR system. See Appendix A - Equipment for a list of parts suitable for use with the Easikey 1000. Note Up to two types of "key" can be used to program each controller. Programming is carried out via:
The internal reader built into the controller. If this is used, the electronic key must be a proximity key. An external reader connected to the controller. This can be a Magstripe reader, AVR, PIN reader or Wiegand reader. In this case, the ID Device used is dependent on the attached reader. Both readers can be used to program the controller. Is the code one that has been programmed into its memory?
If so, is it allowed through this door?
2.2 How it Works The system operates when a PAC key is presented close to a door reader, a Magstripe card is swiped through a Magstripe reader and so on. A unique code programmed into the key is transmitted to the reader and back to the controller. When the controller receives the code, it checks:
1. 2. 3. At this time and on this day?
If the answer to all these questions is yes, the door controller will operate an electric lock (or possibly some other type of locking mechanism) for a set number of seconds, allowing the key holder to pass through the door. Often there will be pushbutton of some type on the secure side of the door, the Request to Exit switch, to allow anyone to leave the area. Note The information provided in this document assumes that proximity keys are used. Appendix B - Using External Readers details any differences required if other "keys" are used, such as Magstripe cards. 2.3 Features 2.3.1 Access Points The Easikey 1000 will control either one or two doors, each of which may be up to 100m away from the controller. Several types of reader may be used (see Appendix A - Equipment) along with Request to Exit switches. The door controller will supply 12V dc in either fail-safe (power to lock) or fail-secure (power to unlock) locks. 2.3.2 Personnel Up to 1000 individual keys can be stored in the memory of the controller. Each key can be allowed through either door, both doors or no door at all (locked out). A time profile can be assigned to a key or to a door in order to restrict access to certain days and times. 17047 Ver 1.8 DRAFT C 2 Easikey 1000 The Easikey 1000 2.3.3 Door Monitoring Alarms Each door may be monitored through a Door Contact switch. This enables the system to generate the following alarms:
Unauthorised Access Alarms. These are generated when a door is opened without a valid key being presented or a request to exit signal being received. Door Left Open Warnings. These are generated when the door is held open for longer than the Door Open Time. It should be noted that the Door Open Time starts after the Lock Release Time has expired. 2.3.4 Time Profiles Both doors and personnel can be assigned time profiles. A door can be programmed to open, for example, between 9.00am and 5.00pm Monday to Friday, but require a key outside those hours. Similarly, a time profile can be assigned to a key which will only allow it to be used on certain days and at certain times. Up to 8 different time profiles can be created; each containing up to 3 time periods. 2.3.5 Printer Facilities The Easikey 1000 door controller keeps a record of the most recent 1000 transactions. When a printer is connected, any stored transactions are printed first with subsequent transactions being printed as they happen. If the printer is switched off, or otherwise disconnected, the transactions are stored and will be printed out from the point at which printing stopped when the printer is reconnected. In addition, while in Editor mode, the database information, keys, time profiles and door information and the movements of individual keys can be printed. The only action the user need take is to ensure that the printer is kept supplied with paper and does not jam. 17047 Ver 1.8 DRAFT C 3 Easikey 1000 3. Installation of the Controller 3.1 Introduction The following diagram shows the Easikey 1000 controller with dimensions, connections, etc. Installation of the Controller Figure 1 Easikey 1000 Controller The Easikey 1000 will need an enclosure and a power supply. Two boxed versions of the Easikey 1000 are available:
A closed box which must be opened to administer the system. An open box which has a cutout in the lid which allows access to the keypad without opening the box. In this instance, only the Installation Engineer should have access to the box. Note EASIKEY 1000 Plus indicates that the controller has door monitoring and alarm relay facilities, see Section 5. 17047 Ver 1.8 DRAFT C 4 Easikey 1000 3.2 Closed Box Version This version has a built-in power supply with room in the enclosure for two 6Ah lead acid batteries. Installation of the Controller Figure 2 Closed Boxed Easikey 1000 17047 Ver 1.8 DRAFT C 5 Easikey 1000 3.3 Open Box Version This version is also available with a built-in power supply with room in this enclosure for one 12V 2.8Ah lead acid battery. Installation of the Controller Figure 3 Open Boxed Easikey 1000 17047 Ver 1.8 DRAFT C 6 Easikey 1000 Installation of the Controller 3.4 Power Supply The Easikey 1000 requires a 12V(3A)/24V(1.5A) dc power supply or an ac transformer rated at 16.5V ac at 1.5A. Notes 1. The red LED is constantly lit when the alternating current is present except when in the Editor mode. 2. The controller and two readers require 600mA. In addition, enough current must be available to power the locks attached to the controller. Therefore, a power supply capable of providing between 600mA and 3A in total should be used, depending on the current consumption of the locks. 3. The database is stored in battery-backed memory and will be preserved whether the controller is powered or not. This backup will last up to 12 months when the controller is not powered. A NICAD rechargeable, non-replaceable battery is used to provide memory backup and this is kept at full charge as long as the controller is powered. If the battery is flat, it will be recharged once power is returned to the controller. 3.4.1 Fuses The following table details the location, type and rating of each fuse. Ref FM F1 Name/Location Type Mains fuse on mains terminal block HBC, anti-surge Rating 1.5A PSU 160mA 3A PSU 1A Battery fuse at bottom of PCB*
20mm glass, quick blow 3.15A 3.15A F2, F3 Lock supply fuse - by reader channels*
20mm glass 500mA 1A
* The lock supply and battery fuses are located in vertical fuse holders on the controller. 3.5 Power Supply Connections The following diagrams show how the different power supplies should be connected to the controller. 17047 Ver 1.8 DRAFT C 7 Easikey 1000 Figure 4 Power Supply Connections Installation of the Controller 3.6 Battery Backup Battery backup is a feature of the power supply chosen. The capacity of the battery required should be calculated based on:
The current consumption of the controller and readers (up to 600mA). The current consumption of the locks when operating normally (up to 1A each). The type of lock (fail-safe or fail-secure). The length of time the system should operate without mains power. Example An Easikey 1000 with two readers and two 300mA fail-safe locks will continuously draw about 1.2A. A 2.8Ah battery will therefore provide approximately 2 hours supply. Note The battery is connected to the battery terminals B+ and B-. When the battery is low
(less than 12V), the green LED is constantly lit except when in Editor mode. 3.7 Fitting the Controller The controller should be mounted in a secure but accessible location bearing in mind that operators are going to have to program the system at the controller. The controller should be mounted so that the display is at about eye level. There are several holes on the backplate that may be used for mounting. If you are using the Boxed Easikey 1000 there are several holes in the back of the box (see Figure 2 and Figure 3) that may be used for mounting. 3.8 External Readers Each Easikey 1000 controller can have an external reader fitted which can be used to administer the system in conjunction with or instead of the internal reader. The external reader is used when keys other than proximity are used. The external reader, if used, is connected to the controller via plug in sockets on connectors 23-26 inclusive situated on the bottom edge of the controller. 3.9 Printer 3.9.1 Printer Specification An 80-column dot matrix printer with a serial interface is required. The serial interface must be set, using switches and/or jumpers, with the following parameters:
4800 baud 8 data bits, 2 stop bits No parity Hardware handshake using DTR/CTS. When the printer is busy, it should force DTR low. PAC have used the EPSON LX series and the OKI Microline 182 printers successfully in the past. 3.9.2 Printer Cable The following cable is required:
Use 0.22mm 4-core unscreened signal cable, maximum length 15m. Easikey 1000 5-way printer terminal block Printer 25-pin male D-type connector TX 3 CTS 20 RX DTR GND 7 RX DTR Signal Ground 17047 Ver 1.8 DRAFT C 8 Easikey 1000 Installing Readers and Lock 4. Installing Readers and Lock 4.1 Readers There are several types of readers which can be used with the Easikey 1000, namely:
The reader is connected to either reader connector 1 (connections 1-6) or 2 (connections 12-
17). The wiring for each type of reader is described below. 4.1.1 Proximity Reader Wiring Proximity readers. PIN readers. Magstripe readers (PAC format only). Wiegand readers (via PAC Wiegand interface unit). AVR readers. Figure 5 Proximity Reader Wiring Diagram See Appendix A - Equipment for a list of PAC readers suitable for use with the Easikey 1000. Use the most appropriate reader for the location bearing in mind, internal or external, vandal resistance, decor, panel mounting etc. 4.1.2 PIN Reader Wiring Figure 6 PIN Reader Wiring Diagram 17047 Ver 1.8 DRAFT C 9 Easikey 1000 Installing Readers and Lock 7/0.2, 0.22mm 3m Gauge:
Signal
+12V
-V SIG VCA 4.1.3 Magstripe Reader Wiring All connections to the Magstripe reader are made to a 4-conductor flying lead as follows:
Length:
Colour Red Black Blue Yellow Notes 12V dc input 9-16V dc, 50mA typical. Power and signal return Signal Valid code accept. Active low, LED changes state when the input falls below 0.6V. This wire should be connected to earth. Do not connect it to the -V terminal. Drain Wire Notes 1. Unlike PAC proximity readers, shielded cable is recommended for the interconnection between the reader and door controller. It is essential that on long cable runs, at least the minimum voltage is maintained at the reader. 2. Figure 7 Magnetic Stripe Reader Wiring Diagram Note The door contact is optional. 4.1.4 Wiegand Readers Wiring Wiegand devices are attached using PAC's Wiegand interface unit which converts the Wiegand code output by the Wiegand device into a format that would be sent by a conventional PAC reader, making the Wiegand device transparent to the Easikey 1000 controller. There are two jumper connections on the Wiegand interface units circuit board which should be set as follows:
Jumper J1 Jumper J2 Open Closed Refer to 17132 PAC Wiegand Interface Installation Instructions for full details. 17047 Ver 1.8 DRAFT C 10 Easikey 1000 Installing Readers and Lock Figure 8 Easikey 1000 Controller to Wiegand Interface Wiring Diagram Figure 9 PAC Wiegand Interface to Wiegand Device Wiring Diagram Note The door contact is optional. The following is the wiring for a typical Wiegand device (when no door monitoring or reader tamper is being used):
Wiegand Interface 8-way terminal block Wiegand Device integral cable or terminals
+5V 5V/+V W0 DATA0 W1 DATA1 LED LED BI N/C TMP DC GND GND/-V Figure 10 Typical Wiegand Device Wiring Diagram 17047 Ver 1.8 DRAFT C 11 Easikey 1000 4.1.5 AVR Reader Wiring Installing Readers and Lock Note Figure 11 AVR Reader Wiring Diagram A reader with a smaller loop, without the Loop Break and RTE connections, is connected to the Easikey 1000 to read the transmitter codes into the controller for programming. 4.1.6 Reader Fitting See the datasheet supplied with the PAC reader being used for specific details for fitting that type of reader. In general:
Readers should be mounted at a convenient height, usually at about the height of a door handle, on the unhinged side of the door. Readers should be mounted at least 1m apart to prevent any interaction between them. Consider future service requirements such as access to cables, etc. 4.1.7 Reader Cabling Use unscreened multistranded tinned copper signal cable, the type commonly used in alarm installations. The gauge depends on the distance from the controller to the reader and the type of reader. 4 cores are used to connect the reader itself; the other 2 cores are for the optional request to exit signal and the optional door monitoring signal. 4.1.7.1 Magstripe Readers 6-conductor, multi-stranded, shielded cable should be used for the following distances and gauges:
up to 100m 0.22mm 4.1.7.2 Wiegand Readers 6-conductor, multi-stranded, shielded cable should be used for the following distances and gauges:
up to 100m 0.22mm 4.1.7.3 All Other Readers 4/6-conductor, multi-stranded, unshielded cable should be used for the following distances and gauges:
up to 100m 0.22mm The readers are not prone to electrical interference, however avoid routing cable close to heavy load switching cables and equipment. If this is unavoidable, cross the cable at right angles every 1-2m. 17047 Ver 1.8 DRAFT C 12 Easikey 1000 Installing Readers and Lock 4.1.8 Reader Connections All PAC readers have 4 terminals; +V, VCA, SIG and -V. Each reader is connected to the door controller reader 1 or reader 2 terminal block. The door controller has 2 further connections, DC and RTE. These provide door/cable monitoring and request to exit inputs respectively. Reader Marking Description
+V Supply: 12V. VCA Valid code accepted, illuminates the green LED at the reader. Request to exit. Door monitoring. SIG The signal from the reader to the controller.
-V Supply: 0V. 4.2 Request to Exit (RTE) 4.2.1 Wiring Detail Connects to Controller 6-way terminal block V+
VCA RTE DC SIG GND Note Figure 12 Request to Exit Wiring Diagram As connecting RTE to ground (-V) will always operate the lock, ensure that the request to exit wiring is not accessible from outside the secure area (e.g. if the reader is removed from the wall.) The Request to Exit switch allows persons within the secure area to leave by signalling to the door controller to operate the lock without using a key. The switch is necessary when door monitoring is used (see Section 5) to enable the controller to distinguish between a forced door and a valid exit. The switch should be 'normally open' which closes momentarily when pressed. The switch can be located away from the door, for example, at a reception desk or as part of a door entry system. In which case, it is possible to change the printed event report to Request for Entry (see Section 7). More than one switch can be used (if wired in parallel) for a door if required. If an attempt is made to keep the door open by holding down the Request to Exit switch, the door will lock after 5 cycles of the lock release time and, if a printer is fitted, an RTE Button Held Down report is produced. 17047 Ver 1.8 DRAFT C 13 Easikey 1000 4.3 Door Contact (DC) The door monitoring facility is described in this section. 4.3.1 Lock Output Installing Readers and Lock Figure 13 Lock Output Wiring Diagram All locks should be fitted according to the manufacturers instructions. The Easikey 1000 provides a lock output for each reader channel. These outputs are capable of providing:
12V lock at up to 1A each for the dc PSU (part numbers 21450, 21453) 12V lock at up to 500mA each for the ac PSU (part numbers 21448, 21452). Each lock output is protected by a fuse fitted next to the reader connector as follows:
A 1A, 20mm glass, quick blow fuse for those with the dc PSU. A 500mA, 20mm glass, quick blow, fuse for those with the ac PSU. Each output can be independently set as fail-safe (power to lock) or fail-secure (power to unlock), see Section 7. The cable between the door controller and the lock should be of such a gauge as to provide at least the minimum voltage required to operate the lock. The resistance of the cable and the current drawn by the lock will determine the type of cable. 4.3.2 Lock Suppression All locks must be fitted with a means of suppressing back EMF ('spikes') generated by most electric releases, especially magnetic locks. All PAC readers are now supplied with a Metal Oxide Varistor (MOV). This device should be fitted across the lock terminals at the lock. This device will prevent long term damage being done to the door controller. 4.3.3 Safety Any door that is considered a fire door or is on an escape route must have some means of overriding the electric release in an emergency. Usually this is achieved by the use of fail-safe locks (power to lock) fitted with a normally closed break-glass in the lock supply. When the break-glass is operated, the supply to the lock is broken and the door will be released without any intervention from the door controller. 17047 Ver 1.8 DRAFT C 14 Easikey 1000 Door Monitoring and Alarm Relays 5. Door Monitoring and Alarm Relays This section describes the following facilities:
Door Monitoring. This allows you to monitor each door by using a Door Contact switch. Unauthorised Access and Door Left Open alarm messages can then be generated and used to increase the security of the system. Alarm Relays. An alarm relay is provided on each door channel which can be used, for example, to generate an audible alarm when an Unauthorised Access or Door Left Open situation is detected. 5.1 Wiring Detail Figure 14 Door Monitoring and/or Tamper Detection Wiring Diagram 5.2 Door Contact Monitoring The Easikey 1000 has the ability to monitor a door contact allowing the following reports to be generated:
Unauthorised Access Alarm which provides warning of a forced door. Door Left Open Warning which is generated after a set period of time. This time is set in the door database (see Section 7). In addition, there is a cancellation of lock release time which allows the door to lock after someone has passed through even though the lock release time has not expired. The door contact should be a Normally Closed switch that is open whenever the door is open. Care should be taken when fitting door contacts to ensure that they operate only when the door is opened and close only when it is secure. 17047 Ver 1.8 DRAFT C 15 Easikey 1000 Door Monitoring and Alarm Relays To help prevent false alarms:
Keep reed switches away from large magnetic fields, such as those generated by magnetic locks. This is a particular problem with metal door frames. Ensure that the switch does not operate if the door moves in its frame, in draughty or windy conditions. An efficient door closer should be fitted that secures the door once someone has passed through. 5.3 Cable/Reader Anti-Tamper In addition to monitoring a door contact, the DC connection also provides a tamper detection function. Tamper is detected when the SIG line breaks at the same time as DC opening. This is achieved whether or not a door contact is fitted. To provide full protection of the cable and reader the DC core should be terminated at the reader -VE terminal to ensure that the DC to -
VE circuit breaks when the reader is removed. IMPORTANT Tamper detection does not operate when the door is manually unlocked, automatically unlocked via a time profile or while the door is open through the use of a key or RTE. The functions described here are set up in the door database. See Section 7 for details on how these facilities are enabled. 5.4 Alarm Output Relay Relay NC COM NO Normally Closed Common Normally Open A relay is provided on each channel with Common, Normally Open and Normally Closed terminals. Both relays have the same fixed function, changing over in the event of an Unauthorised Access alarm or a Cable/Reader Anti-Tamper alarm. The relay will change back when the alarm is accepted. Alarm relay 1 is activated for alarms on reader 1 and alarm relay 2 is activated for alarms on reader 2. Each relay is de-activated when it is accepted by an editor key or the door is closed. Note The relay changes over for the Door Left Open warning. The relay contacts are rated at 0.4A at 125V ac and 2A at 30V dc. Note When channel interlock is active, alarms on both readers activate alarm relay 1. Alarm relay 2 is not used. 17047 Ver 1.8 DRAFT C 16 Easikey 1000 Door Monitoring and Alarm Relays 5.5 Emergency Override/Free Exit There is a special case where both the RTE and DC signals are interpreted differently to those described above. The RTE signal is used to monitor an Emergency switch, such as a break glass, and DC provides a Free Exit report. See Section 7.1.4 for how to enable this feature. Note When this feature is used, there is no tamper detection and no door alarm monitoring. Figure 15 Emergency Override/Free Exit Wiring Diagram 5.5.1 Emergency Override When connected as shown, operating the break glass will open the door and produce an Emergency Override On report at the printer. When the switch is restored an Emergency Override Off report is produced and the door will be locked again. Note This feature should not be fitted as the sole means of escape, see Section 4.3.3. 5.5.2 Free Exit In the case of the door contact, this will produce a Free Exit report and operate the lock when the switch is opened. A Normally Closed switch may be used to operate as a Request to Exit switch in addition to having a door contact switch in series. The door contact will allow Door Left Open warnings to be produced. Note The lock will operate whenever the door contact is opened. Care should be taken that the door contact cannot be broken from the secure side of the door. 17047 Ver 1.8 DRAFT C 17 Easikey 1000 Setting Up the System 6. Setting Up the System Follow this section through to set up the system for the first time. 6.1 Switching On Once the door controller is fitted, with readers and locks in place, the unit can be powered up for the first time. The procedure for initial start-up is as follows:
1. Disconnect all reader, lock and printer terminal blocks at the controller. 2. Apply the 12V dc power. The screen will briefly display 8888 and beep 4 times. The display will then be clear and the red power-on LED will light. 3. Connect the first reader. 4. If fitted, operate the RTE for the first reader. If no RTE is fitted, use a short piece of wire to short RTE to -V at the terminal block. The display should show oP and the green LED on the reader should illuminate. 5. Repeat for the second reader if required. 6. Now install the master key (see Section 6.2). 7. Program the door data (see Section 7). 8. Connect the locks and ensure they operate in accordance with the door data settings. 9. Check the clock (see Section 14.1). 6.2 Installing the Master Key To install the master key:
1. Press the small Reset button, SW1, situated on the top left-hand corner of the circuit board. The controller will beep 4 times. While it is beeping press the Reset button again. The display will flash all its horizontal bars. 2. Present an ID device (proximity token, Magstripe card, etc) to the controller reader being used (either internal or external). This will become the master key. 3. The controller will beep and the display will alternate between CLr and ALL? This means "Do you want to wipe out the whole database?". If this is a new, unprogrammed system, the answer should be "Yes". Press VOID/5 followed by SEL/SAVE to wipe out the database. If you do not want to wipe out the whole database, just press ESC. IMPORTANT If you are replacing, the master key, press ESC. The display will clear. Present the new master key. The display will show:
indicating that you are in Editor mode and may select one of the functions. When the master key is installed, after wiping the database the following parameters are set:
The master key is also installed as user key 0001 with access through both doors and no time profile set. Each door is given a lock release time of 5 seconds. Each lock is set to fail secure (power to unlock). 17047 Ver 1.8 DRAFT C 18 Easikey 1000 Setting Up the System 6.3 Replacing the Master Key To replace the master key follow the steps shown above in Section 6.2 but when the display alternates between CLr and ALL? , press ESC to preserve the existing database. When the database is preserved, nothing is changed except that the master key is installed in the key database with complete access. It will normally go into position 0001 replacing the old master key unless another key has this number, in which case it goes in the next available position. 17047 Ver 1.8 DRAFT C 19 Easikey 1000 Setting the Door Data 7. Setting the Door Data The DOORS/6 key allows you to set up or change various parameters concerning the doors and locks. These parameters are described below, followed by a procedure for setting them. 7.1 Description of Parameters 7.1.1 Lock Release Time This is the amount of time that the lock will be operated. Usually about 5 seconds is sufficient to allow people to open the door. You may need to set a longer time for older or disabled people. When door monitoring (see Section 5) is used, any unexpired lock release time is cancelled as soon the door closes. 7.1.2 Door Open Time This is the amount of time allowed after the expiry of the lock release time before a door left open warning is given. Usually between 10 and 20 seconds is set. A value must be entered here if door monitoring and/or cable tamper detection is required. If this value is 0, door and cable monitoring is disabled. It may be useful at times to disable door monitoring while investigating the cause of false alarms. 7.1.3 Door Time Profile Here a time profile, 1-8, is entered if automatic opening and closing is required. See Section 12 for more details. 7.1.4 Door Options There are 5 options that can be set. Each is displayed as a vertical bar, full height when set, half height when not set. 7.1.4.1 Lock Mode UNSET SET Lock operates as fail-secure, power applied to unlock door. Lock operates as fail-safe, continuous power to keep door secure, removed to unlock. 7.1.4.2 Free Exit This option modifies the way that DC and RTE are monitored. UNSET SET DC monitors door contact and reader/cable tamper. RTE is request to exit. DC will give Free Exit without an alarm. RTE gives Emergency Override On when closed, Emergency Override Off when opened. Request to Exit Request for Entry 7.1.4.3 RTE Report This option controls the type of report printed when RTE is operated. UNSET SET 7.1.4.4 AVR This option must be set if an AVR reader is to be used. Any attached AVR will not be recognised. UNSET SET Any attached AVR attached will be recognised. 17047 Ver 1.8 DRAFT C 20 Easikey 1000 7.1.4.5 Set/Reset UNSET SET Presenting a key to the reader will release the lock for the time specified by the lock release time. Presenting a key to the reader will release (unlock) the lock. It will stay in this state until the key is again presented to the reader when the door will again lock. Setting the Door Data 2 SEL?
Example Display 7.2 The DOORS/6 Function Press at any time to move between door 1 and door 2. Press at any time to move between parameters. The parameters are presented in the order described above. Press ESC at any time to return to SEL?
Action Step Present an editor key to the controller reader. 1 Press DOORS/6. Lock release time for door 1. Either:
or or Door open time for door 1. Either:
or or Time profile for door 1. Either:
Type a new time, 0-255, followed by SEL/SAVE, Press to go to door 2, Press to go to next parameter. Type a new time, 0-255, followed by SEL/SAVE, Press to go to door 2, Press to go to next parameter. d1dt / 000 d1Lt / 005 d1tP / 0 3 4 5 6 7 d1oP /IIIII d1UL / LoC Type a new time profile 0-8 followed by SEL/SAVE, Press to go to door 2, Press to go to next parameter. or or Door options for door 1. See Section 7.1.4 for descriptions of each option. Either:
Press 1,2,3,4 or 5 to set or unset followed by SEL/SAVE. Press to go to door 2, Press to go to next parameter. or or Manual lock/unlock for door 1. See Section 14.4. 17047 Ver 1.8 DRAFT C 21 Easikey 1000 Installer Facilities 8. Installer Facilities This section describes facilities available using the INST/9 key. 8.1 Setting the Clock It is important when using time profiles, or if you are using the printer to log events, that the clock and calendar are checked regularly. Use the following procedure for setting the clock:
If at any point you enter an invalid value, like 15 for the month, you will get a long beep and the original value re-displayed. If the date is invalid, e.g. 31/06/93, you will be returned to the year value, step 4 in the procedure below. Re-enter the correct month and date. Example Display Step 1 2 3 4 5 6 7 8 9 SEL?
SEtC Yr93 Mt05 dt06 dy2 Hr11 Mn08 Action Present an editor key to the controller reader. Press INST/9 Press SEL/SAVE Type the new year value (e.g. 93) and press SEL/SAVE. Press
to move to the next item. Type the new month value (e.g. 05) and press SEL/SAVE. Press to move to the next item. Type the new day value (e.g. 06) and press SEL/SAVE. Press
to move to the next item. Type the day of the week, Mon=1, Tue=2, Wed=3, Thu=4, Fri=5, Sat=6, Sun=7, and press SEL/SAVE. Press to move to the next item. Type the hour and press SEL/SAVE. Press to move to the next item. Type the minute and press SEL/SAVE. The clock is now set. Press ESC. Press ESC to leave the Editor mode. SEL?
10 8.2 Upload/Download It is possible to use the serial ports on two Easikey 1000 controllers to copy the database from one to the other. To do this a cable should be made up as follows:
Use 0.22mm 4-core unscreened signal cable, maximum length 15m. Easikey 1000 5-way printer terminal block (connector no.) Easikey 1000 5-way printer block terminal (connector no.) GND (27) GND (27) DTR (28) CTS (30) RX (29) TX (31) CTS (30) DTR (28) TX (31) RX (29) Once the two controllers are connected the following procedure should be performed:
Note The transfer can be cancelled at any time by pressing ESC at both controllers. 17047 Ver 1.8 DRAFT C 22 Easikey 1000 Step 1 2 3 4 5 6 Sending Unit Receiving Unit SEL?
SetC in oUt SEL?
SetC in in oUt / nnn in
/ in Installer Facilities Action Present an editor key to each controller reader. Press INST/9 at each controller. Press at each controller. Press again at sending controller only. To start the transfer:
Press SEL/SAVE twice on the receiving controller then:
Press SEL/SAVE twice on the sending controller. The sending controller will display oUt alternating with the percentage complete. The receiving controller will flash in. When complete, both displays will return to SEL?
Press ESC to leave Editor mode. SEL?
SEL?
7 8.3 Editor Keys This function is fully described in Section 13. 8.4 Channel Interlock When a reader is used on both sides of a door to monitor both entry and exit, it is only necessary to feed one lock. The same lock, lock 1, will be operated by both reader 1 (entry) and reader 2 (exit). Lock 2 is not used. Door monitoring and RTE, if used, are on channel 1. Step 1 Example Display Action Present an editor key to the controller reader. Press INST/9. 2 3 4 5 6 SEL?
SetC P00 P00. SEL?
Press 4 times. Press to toggle Channel Interlock ON/OFF Press ESC to leave Editor mode. 17047 Ver 1.8 DRAFT C 23 Easikey 1000 Installer Facilities 8.5 Anti-Passback When two readers are used to control both entry into an area and exit out of the area, anti-
passback may be set. This will prevent a key being used to enter an area it has already been used to enter first leaving the area. If an attempt is made to use the key to enter the area again, a No Access: Pass Back report will be generated on the printer. As with channel interlock, channel 1 is considered the entry reader and channel 2 the exit reader. Passback may either be active until the key is used to leave the area, or a time limit may be assigned after which the key may be used to enter the area again. The time limit is useful if people are likely to leave the area without using their keys, without the time limit they would be unable to get back in the area. Step 1 Action Present an editor key to the controller reader. Press INST/9. Example Display Press 4 times. Type a value followed by SEL/SAVE. 0 1 2-60 Number of minutes after which a key will work again if No pass back Pass back with no time limit. it is not used to leave the area. 2 3 4 5 SEL?
SetC P00 or P00. if Channel Interlock is set. P15 (with an anti-
passback time set to 15 mins) SEL?
Press ESC to leave Editor mode. 6 8.6 Software Version Display It may be useful at times to verify the software version used in the controller. You may be asked for this by PAC Technical Support. Step 1 Action Present an editor key to the controller reader. Press INST/9. Example Display 2 3 4 5 SEL?
SetC v100 SEL?
Press 5 times. In this case version 1.00 is displayed. Press ESC. Press ESC to leave Editor mode. 17047 Ver 1.8 DRAFT C 24 Easikey 1000 9. System Administration 9.1 The Controller Keypad and Display This section describes how to use the controller keypad to administer the system. System Administration Figure 16 Controller Keypad and Display 9.2 Editor Keys In order to perform any administration on the system, an editor key is required. This allows the operator to access editing functions at the controller and also to accept alarms. There is one master key which is a special editor key that can add or remove editor keys as well as perform other editor key functions. The master key is created when the system is first installed, although it can be changed at a later date if lost or stolen. 17047 Ver 1.8 DRAFT C 25 Easikey 1000 System Administration 9.3 How to use an Editor Key Whenever any changes need to be made to the system an editor key should be presented to the built-in key reader. If the key is valid the screen will display SEL? From this point, press one of the following keys:
PIN/1 KEY/4 VOID/5 DOORS/6 TIME/7 PRINT/8 INST/9 Allows the PIN number associated with a key to be displayed Allows keys to be added or edited. Allows keys to be removed from the system. Allows the door information, including manual lock/unlock, to be edited. Allows time profiles to be set up and alter. Allows the use of print functions. Provides access to clock setting, add/delete editor keys, set channel interlock, set anti-pass back and upload/download Leaves Editor mode. ESC Other keys used when in Editor mode are:
SEL/SAVE 9.3.1 Entering Data You will need to enter different types of data at certain points in Editor mode. Important points to remember:
Whenever you add or change any data item you must press SEL/SAVE to confirm. You can press ESC to leave the data unaltered. Different types of data use different methods:
Typing: For instance when you need to enter a key number or a time in a time profile. Arrow keys for moving around. Used when entering data or to confirm operations. When pressed, each number appears at the cursor position, a flashing underline. You can use the arrow keys, , to move the cursor position. Toggling: In this case, pressing certain keys changes the state of the data. For example, when changing days of the week in time profiles, pressing 1 for Monday, 2 for Tuesday, etc., will change the current state; if it is on, pressing the key will switch it off and vice versa. 9.3.2 Editor Time-Out If after entering Editor mode, no keys are pressed or no key is presented to the controller reader for 3 minutes, the Editor mode will time-out. This means it will return to the normal display and the editor key will have to be presented again. This can be a useful feature if you are not sure how to get out of the system - just leave it and it will automatically leave Editor mode. 17047 Ver 1.8 DRAFT C 26 Easikey 1000 Displays and Alarms 10. Displays and Alarms The Easikey 1000 door controller will display various characters on its 4-character screen and produce a sound as a response to certain conditions. These are described below. Also included in this section are example printer reports produced when a printer is attached to an Easikey 1000. 10.1 Power Indicators When not in Editor mode (to add/delete keys, etc.) the red and green LEDs are used as power indicators as follows:
These are not referred to elsewhere in the document and it is assumed that power is supplied to the unit. 10.2 Normal Displays When nothing is happening, the display is blank and no sounds are produced. Whenever a door is opened normally, either with a key or by using a Request to Exit switch, the display will show:
The red LED is constantly lit indicating that ac supply is healthy. The green LED is constantly lit when the battery (if any) is low (less than 12V). Door 1 Open Printer Example Door 2 Open Both Doors Open DATE TIME
[0123] 12/06/95 10:34
[0124] 12/06/95 10:35
[0125] 12/06/95 10:50
[0126[ 12/06/95 13:30 DOOR 1 2 2 1 USER 0092 TRANSACTION Access Authorised Request to Exit Manual Unlock Automatic Unlock 10.3 Door Left Open Warning This warning will only be given if door monitoring is being used - check with the installer of the system to see if this is the case. If a door is left open longer than the time set, the oP(shown above) will start to flash for the particular door left open. The oP will continue to flash until the door is closed. There is no sound associated with this warning. Printer Example DATE TIME
[0233] 12/06/92 12:34
[0234] 12/06/92 12:35 DOOR 1 1 USER TRANSACTION Door Left Open Door Closed 17047 Ver 1.8 DRAFT C 27 Easikey 1000 Displays and Alarms 10.4 Unauthorised Access Alarm This alarm will only be given if door monitoring is being used - check with the installer of the system to see if this is the case. If a door is opened without a key being used, time profile being active, manual unlock used or a Request to Exit switch being pressed, the controller interprets this condition as Unauthorised Access. In this case, the alarm has to be accepted by presenting an editor key to the controller reader. This alarm gives exactly the same displays and sounds as for Cable or Reader Tamper alarm (see Section 10.6). However, the printer report is different. AL, Flashing Every 2 seconds Display Sound Unauthorised access or cable tamper. Present editor key to accept, the sound will stop. AL, Steady Silent Display Sound Accepted alarm or cable/reader tamper. The alarm condition still exists, either the door is still open or the cable/reader is still tampered. Printer Example DATE TIME
[0278] 12/06/92 13:34
[0282] 12/06/92 13:35
[0285] 12/06/92 13:37 DOOR 1 1 1 USER MASTER TRANSACTION Unauthorised Access Local Alarm Accepted Alarm Cleared 10.5 Duress Alarm This alarm will only be given if a PIN reader is being used and the keyholder is forced to open the door under duress. If the PIN is, for example, 1234, the keyholder may enter 1235 instead. This will open the door but send a code to the controller indicating that the door has been opened under duress. The alarm generated at the controller is as follows:
dU, Flashing Every 2 seconds Display Sound PIN Code Duress. Present editor key to accept the alarm; the sound will stop and display will clear. Printer Example DATE TIME
[0278] 12/06/92 13:34
[0282] 12/06/92 13:35 DOOR 1 1 USER MASTER TRANSACTION PIN Code Duress Local Alarm Accepted 17047 Ver 1.8 DRAFT C 28 Easikey 1000 Displays and Alarms 10.6 Cable or Reader Tamper Alarm This alarm will only be given if the reader has been wired to detect this condition - check with the installer of the system to see if this is the case. This alarm gives exactly the same displays and sounds as for Unauthorised Access alarm
(see Section 10.4). However, the printer report is different. Printer Example DATE TIME
[0278] 12/06/92 13:34
[0282] 12/06/92 13:35
[0285] 12/06/92 13:37 DOOR 1 1 1 USER EDITOR - 1 TRANSACTION Anti-tamper Alarm Local Alarm Accepted Alarm Cleared 10.7 Alarm Relays In the case of the Easikey 1000 alarms (Door Left Open, Unauthorised Access and Cable or Reader Tamper), the alarm relays can be used to operate, for example, an audible alarm such as a siren, etc. 17047 Ver 1.8 DRAFT C 29 Easikey 1000 Adding and Voiding Keys 11. Adding and Voiding Keys 11.1 Key Numbers A key, when added into the system, is given a number between 0001 and 1000. Normally when a key is added it will be given the first available number in the list. For example, if a system contained keys 0001, 0002, 0003, 0004 and 0006, the next key added would be given number 0005, the following keys would be 0007, 0008 and so on. However, it is possible to override the automatic number and give a key a specific number, provided the number is not already in use -
see Section 11.2.3. It is important to keep a record of key numbers issued (on the Programming Worksheet) as it may be necessary to void a lost key at a later date, in which case the number given to the key must be known. 11.2 Access Levels and Time Profiles Each key added to the system can be assigned an access level and a time profile. This defines which doors the key is allowed through and at what times and days the key can be used. If you decide to use access levels and/or time profiles, it is a good idea to group all keys with the same access requirements together as this makes adding blocks of keys much easier. 11.2.1 Access Levels A key may be allowed access to door 1 only, door 2 only, both doors or neither door. Allowing a key access to neither door can be useful when a key is lost or stolen. Rather than using VOID it may be better to lock the key out then, if a printer is fitted, there will be a record if an attempt is made to use the key. When adding or editing a key, the access level is displayed as two dots on the right of the display, the left half of the display indicating time profile. If the first dot is lit, that key will have access to door 1, the second dot indicates access to door 2 (see Figure 17). If neither dot is lit, the key is locked out. 11.2.2 Time Profiles A key may be restricted to which days and at what times it may be used. This is done by assigning one of 8 different time profiles to the key. If a key is assigned a time profile of 0, there will be no time restriction at all; it will operate 24 hours a day, 7 days a week. See Section 12 for more details on how to create and use time profiles. Time Profile set to 2 Green LED flashing, Adding a key Access to door 2 only Figure 17 How the System Displays Access Level and Time Profile When Adding a Key 17047 Ver 1.8 DRAFT C 30 Easikey 1000 11.2.3 Adding a New Key Follow the procedure shown below for adding a new key. If you are adding more than one new key, see Section 11.3. Step 1 Present an editor key to the controller reader. Example Display Action Adding and Voiding Keys 2 3 4 5 6 7 8 9 SEL?
0000 Press the KEY/4 key. Present a new key to the controller reader. 0019 / t0.. 0000 At this point, if both the green and red LEDs come on, the key already exists in the database and may be edited (see Section 11.4). If this is a new key, the green LED only will flash and the display will alternate between the next available key number and the time profile and access level. The example shows key 0019 as the next available number. At this point you may wish to select your own number rather than the number given by the system. If not, go to step 6 below. To select an alternative number press SEL/SAVE, the display will change to:
Now either type in the number you require and press SEL/SAVE, or use the and keys to go up and down the list of numbers. Numbers already assigned will flash with the red and green LEDs steady, free numbers will alternate with their time profile and access level and the green LED flashing. 0019 / t0.. Now any changes can be made to the access level and time profile. If no changes are to be made, go to step 8. To change the time profile, press 1-8 for the time profile you wish to apply. As soon as you press a key the display will stop alternating. Press SEL/SAVE to confirm. The display will start flashing again. To change access levels, press to toggle on/off the dot for door 1, and to toggle on/off the dot for door 2. The example shows key 0019 with time profile 1 and access through door 2 only. Present the editor key (it must be the same one as used in step 1 above) to the controller reader. The green LED will now go steady and the next available number will flash. If you wish to add more keys see Section 11.3; otherwise, press ESC. Press ESC to leave Editor mode. 0019 / t1 . 0020 / t1 . SEL?
17047 Ver 1.8 DRAFT C 31 Easikey 1000 Adding and Voiding Keys 11.3 Adding Several Keys When you want to add several keys in one go, this can be easily done by following the Section 11.2.3 procedure until the end of step 8. At this point, instead of pressing ESC take the following steps:
Step 9 Example Display 0020 / t1 . 10 0021 / t1 . 0022 / t1 . 0023 / t1 . 11 0024 / t1 . Action The green LED will be steady and the next available key number will be alternating with its access level and time profile. Make any changes to the access level and time profile as described above. Notice that any changes are carried over to the next key making it very convenient for adding keys with the same access requirements. Present the new key to the controller reader - there is no need to present an editor key. Continue presenting new keys, one after the other, until all keys are recorded. If a key is presented that is already in the database, its number will briefly be displayed before the display returns to the next available number. If you fill the database with 1000 keys, the display will show FULL. When finished, either press ESC or present the editor key. Press ESC to leave Editor mode. SEL?
12 11.4 Editing a Key To change the access level or time profile assigned to a key, you require either the key itself or the number assigned to the key. The key is edited using the following procedure. Step 1 Example Display Action Present an editor key to the controller reader. Press the KEY/4 key. Either:
or:
or:
present the key to the controller reader, type the key number and press SEL/SAVE, use to select the key number and press SEL/SAVE. SEL?
0000 0019 / t1.. t2 . 0019 / t2 . SEL?
If the green LED is flashing, the key presented is not in the system or the number selected is unused. If the key presented or the number selected is in the database, both red and green LEDs will be on, and the display will be alternating between the key number and the access level/time profile. In the example, key 0019 has been selected, has time profile 1 assigned and is allowed through both doors. Make any changes as described in Step 7 of Section 11.2.3. The display will go steady, press SEL/SAVE to confirm. You will be returned to the alternating display. Return to step 3 if you want to change other keys (press SEL/SAVE if you want to type another number). Otherwise, press ESC . Press ESC to leave Editor mode. 2 3 4 5 6 7 17047 Ver 1.8 DRAFT C 32 Easikey 1000 Adding and Voiding Keys 11.5 Voiding a Key A key can be removed from the database provided you have the key or you know its number. Note If a key has been lost or stolen and you have a printer fitted, it may be better to edit the keys access level to provide no access (see Section 11.2.1) rather than void it. This will then show if an attempt is made to use the missing key. To void a key use the following procedure:
Example Display Step 1 2 3 4 5 SEL?
0000 0019 SEL?
Action Present an editor key to the controller reader. Press the VOID/5 key. The red LED will be lit. Either:
present the key to the controller reader. If you present a key that does not exist, there will be a long beep. type the key number and press SEL/SAVE, use to select the key number and press SEL/SAVE. or:
or:
Valid keys will flash along with the red LED; invalid keys will flash with red and green LEDs steady. Present the editor key to delete the key. There will be a confirming beep and the display will return to:
Return to step 2 above to delete more keys or press ESC to leave Editor mode. Note See Section 13.2 on how to void editor keys 11.6 Identifying a Key If a key is found it can quite easily be identified by presenting it to the controller reader:
Step 1 Example Display Action Present an editor key to the controller reader. Press the KEY/4 key. Present the key to the controller reader. 2 3 4 SEL?
0000 0019 / t1 . If the key exists in the controllers database, the red and green LEDs will be steady and the key number, alternating with its access level/time profile, will be displayed. Press ESC twice to leave Editor mode or follow Section 11.4 procedure if you wish to make any changes. 17047 Ver 1.8 DRAFT C 33 Easikey 1000 Time Profiles 12. Time Profiles Time profiles are a powerful tool for restricting access of personnel or for automating the opening and closing of doors. Typical examples are:
1. A public access door through which anybody can pass between 9:00am and 5:00pm, Monday to Friday, but outside these hours a key is required. Some staff are only allowed access between 8:30am and 5:30pm, Monday to Friday;
8:30am to 12:00pm Saturday. Cleaners are allowed access only between 7:00am and 9:00am Monday to Saturday. Shift workers can gain access between 8:00pm and 6:00am Monday to Friday. 2. 3. 4. Note If you give a door a time profile of 0, it will require a key 24 hours a day, 7 days a week. If you give a key a time profile of 0, it will have access 24 hours a day, 7 days a week. If you are never going to use time controls of any type, there is no need to set up any time profiles at all, just use a time profile of 0 for both doors and keys. 12.1 How They Work There are 8 different time profiles. Each time profile consists of up to three time periods. A time period consists of a begin time, an end time and the days of the week to which it applies. For instance, example 1 above requires just one time period, 9:00am (begin time) to 5:00pm (end time) Monday to Friday (days of the week); example 2 requires two time periods, 8:30am to 5:30pm Monday to Friday plus 8:30am to 12:00pm Saturday only. Time profiles applied to doors will automatically open the door at the begin time of each time period and automatically close the door at the end time of each time period. Doors can also be manually locked and unlocked, see Section 14.4. Time profiles attached to a key will allow access only when the time at which the key is presented falls within the time profile. It is recommended that different time profiles are used for doors and personnel even if they are identical. This means that if a change is required to the door opening times at a later date, these can be achieved without affecting the personnel access times and vice versa. When using time profiles, it is important to check the time and date at regular intervals, say once a month, to ensure that the system operates accurately, see Section 8.1. Notes 1. A time profile always starts at the beginning of the first minute of the time period. That is, in example 1, when the time changes from 8:59 am to 9:00 am. A time profile always finishes at the end of the final minute of the time period. That is when the time changes from 5:00pm to 5:01pm. 2. A time period cannot cross midnight. When, as in example 4 above, it is necessary to cover such a time, two time periods are required, one from the begin time up to midnight (use 23:59), with another time period from midnight (use 00:00) to the end time. In addition to the 3 time periods, each time profile has a status setting, either ON or OFF. When a time profile is in use, its status will be ON; when it is OFF, the effect depends on the application:
When applied to personnel, a time profile that is switched OFF will lock out all personnel with that profile until the time profile status is switched back ON. When applied to a door, a time profile that is switched OFF will stop the door automatically opening. It will also lock a door that is currently open according to that time profile. 17047 Ver 1.8 DRAFT C 34 Easikey 1000 Time Profiles 12.2 How to Set Time Profiles Setting up time profiles is achieved by presenting an editor key and pressing the TIME/7 key. The first display you will see is the status of time profile 1 shown as T1St alternating with on or oFF. It is best to think of the time profile database as a grid, 8 rows representing time profiles, 10 columns being one for the Status and three for each time period. You use the keys to move a 'window' around the grid. If you attempt to move outside the window there will be a beep.
Stat. begin End Time Period A days n tnSt tnAb tnAE tnAd 1 2 on 0900 1700 on 0830 1730
3 on 0700 0900 4 5 on 2000 2359 oFF 0000 0000
6 oFF 0000 0000 7 8 oFF 0000 0000 oFF 0000 0000 Time Period B End days tnbE tnbd 0000 1200 0000 0800 0000 0000 0000 0000 be gi n tn bb 00 00 08 30 00 00 00 00 00 00 00 00 00 00 00 00
be gi n tn Cb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Time Period C End days tnCe tnCd 0000 0000 0000 0000 0000 0000 0000 0000 Wherever you are in the grid, you will see the item name alternating with the item value. When you press a number key to make a change, the display will go steady. Work through the example given below as this shows you in detail how to change values. Changes are made as follows:
You change the status by pressing the 1 key, i.e. pressing 1 will reverse whatever is currently displayed. Press SEL/SAVE when the correct status is displayed. You change times by typing the 4 digits in 24 hour format, e.g. for 1.00pm you would press 1,3,0 and 0 followed by SEL/SAVE to confirm. The day periods are set by switching on or off seven vertical bars in the display. For instance, Monday to Friday is represented as
, while Saturday only would be
. Each bar is changed by pressing 1-7, where 1 represents represented as Monday, 2 Tuesday up to 7 for Sunday. 17047 Ver 1.8 DRAFT C 35 Easikey 1000 Example Time Profiles Add time profile 5 with two time periods, 8:00am to 1:00pm Monday to Friday and 2:00pm to 6:00pm Monday to Thursday (I.e. no access allowed at lunch times or Friday afternoon):
Step 1 Action Present an editor key to the controller reader. Example Display 2 3 4 5 6 7 8 9 SEL?
t1St / on t5St / oFF t5St / on t5Ab / 0000 t5Ab / 0800 t5AE / 0000 t5AE / 1300 10 t5Ad /
11 12 13 14 15 16 17 18 19 t5Ad /
t5bb / 0000 t5bb / 1400 t5bE / 0000 t5bd /
t5dd /
t5Cb / 0000 t5CE / 0000 t5Cd /
Press TIME/7 The status of time profile 1 (may be either on or oFF). Press 4 times to get to time profile 5. Press 1, the display will go to a steady on. Notice if you press 1 again the display will change back to oFF. Make sure on is displayed and press SEL/SAVE to confirm. Press . The begin time of period A (00:00). Type 0800 followed by SEL/SAVE. Notice how the display goes steady as soon as you press a key. Press . The end time of period A (00:00). Type 1300 (for 1:00pm) followed by SEL/SAVE. Press . The days for period A (none at the moment). Type 12345 followed by SEL/SAVE. Notice that as each number is pressed the corresponding bar doubles in size. Press the same number again and it goes back to half size. Make sure the first 5 bars (Mon, Tue, Wed, Thu, Fri) are set. Press . The begin time of period B (00:00). Type 1400 followed by SEL/SAVE. Press . The end time period B. Type 1800 followed by SEL/SAVE. The days for period B. Type 1234 followed by SEL/SAVE. You have completed both time periods for this time profile. Now make sure that the third time period is clear. Press
. Should show 0000, if not, press 0000 followed by SEL/SAVE. Press . Should show 0000, if not, type 0000 followed by SEL/SAVE. Press . Should show
, if not press appropriate numbers to make all bars half size. Press ESC twice to leave Editor mode. 17047 Ver 1.8 DRAFT C 36 Easikey 1000 This completes the setting up of a complete time profile. Time Profiles 17047 Ver 1.8 DRAFT C 37 Easikey 1000 Editor Keys 13. Editor Keys This section describes how to administer editor keys. These functions can only be performed when using the master key. The system allows up to 5 editor keys to be assigned, each one being able to accept alarms, and use Editor mode. Making a key, an editor key will not automatically allow it to be used at a door. If this is required, it should be added as a user key as well. 13.1 Adding an Editor Key Step Example Display Action 1 2 3 4 5 6 Present the master key to the controller reader. Press the INST/9 key. Press 3 times. Press SEL/SAVE. Present the new key to the controller reader. At this point, if the red LED comes on and the number flashes, the key already exists as an editor. If this is a new key, the green LED only will flash and the display will flash. The example shows key 2 as the next available number. Present the master key to the controller reader. The green LED will now go steady and the next available number will flash. You may add more editor keys now if you wish. Press ESC to leave Editor mode. SEL?
SetC Edit E000 E002 7 E003 SEL?
8 13.2 Voiding an Editor Key Note The master key cannot be voided. Step 1 2 3 4 5 Example Display SEL?
SetC Edit E000 6 7 E003 SEL?
Action Present the master key to the controller reader. Press the INST/9 key. Press 3 times. Press SEL/SAVE. Either present the key to the controller reader, or type the key number and press SEL/SAVE, or use to select the key number and press SEL/SAVE. Existing keys will flash along with the red LED. Invalid keys will flash with red and green LEDs steady. Present the master key to delete the key. There will be a short beep and the display will return to:
Return to step 2 above to delete more keys or press ESC to leave Editor mode. 17047 Ver 1.8 DRAFT C 38 Easikey 1000 Other Functions 14. Other Functions 14.1 Setting the Clock This is described in Section 8.1. 14.2 Display PIN Where a PIN reader is being used with the Easikey 1000, it is necessary to know the PIN before the key is issued as the key must be presented to the reader and the PIN entered to open the door. To find the PIN associated with a key:
Step 1 Example Display Action SEL?
Show/Id 1234 2 3 4 Note Present an editor key to the controller reader. Press PIN/1. Present the key to the reader. PIN number displayed. The PIN is derived from the key/card and cannot be changed. 14.3 Display Last Five Keys Used Note No editor key is required for this function. It is possible to display the last five keys used on the readers connected to the Easikey 1000 controller as follows:
Press the KEY/4 key. This displays the last key to be used with the left (red) LED lit if access was through door 1. The right (green) LED is lit if access was through door 2. Press KEY/4 to display the next key used. Up to five keys can be displayed. On the sixth press the display goes blank. Note The display will blank after ten seconds if no key is pressed. Last key used was key 23 Access through door 2 Figure 18 Sample Display 14.4 Manual Lock and Unlock It is possible to manually lock and unlock a door from the controller. It may be necessary to do this, for instance when a door needs to be kept open while contractors are working in an area, or equipment is being moved around. Also a door normally open on a time profile may need to be locked while a receptionist or guard is not available. 14.4.1 Doors Controlled by a Time Profile Manual lock will lock the door, keys will then be required to gain access. If no further action is taken, the door will unlock again at its next automatic opening time. If the door is manually unlocked and no further action is taken, it will lock again at its next automatic closing time. 14.4.2 Doors not Controlled by a Time Profile Manual unlock will unlock the door and it will stay unlocked until manually locked again. 17047 Ver 1.8 DRAFT C 39 Easikey 1000 Other Functions 14.4.3 To Lock/Unlock a Door Use the following procedure to lock/unlock a door:
Step Example Display 1 2 3 4 5 SEL?
d1Lt / 0005 d1UL / Loc d1UL / Loc or d2UL / Loc Action Present an editor key to the controller reader. Press DOORS/6. Press 4 times. The display now shows the current state of door 1
(Loc=locked, ULoC=unlocked). To lock/unlock, door 2 press . To unlock a door, press 1 followed by SEL/SAVE, the display will change to ULoC and the door will unlock. To lock a door, press 0 followed by SEL/SAVE, the display will change to LoC and the door will lock. Press ESC. Press ESC to leave the Editor mode. SEL?
6 14.5 Printer Functions 14.5.1 Transaction Logging All Easikey 1000 door controllers keep a record of the most recent 1000 transactions, a transaction being any of the different types of event that may occur such as Access Authorised, Manual Lock, Automatic Lock, Editor On, etc. (see Appendix C -Transactions for details of all the different types of transaction). When a printer is connected, the controller will print these events as they happen. If the printer is switched off, or otherwise disconnected, the events will be stored and printed from the point at which printing stopped when the printer is reconnected. The only action the user need take is to ensure that the printer is kept supplied with paper, does not jam, and make sure the paper flows freely through the printer. Sample Transaction Printout DOOR TRANSACTION 15/06/93 DATE TIME USER
[0054] 15/06/93 12:09
[0055] 15/06/93 12:10
[0056] 15/06/93 12:14
[0057] 15/06/93 12:14
[0058] 15/06/93 12:15
[0059] 15/06/93 12:17
[0060] 15/06/93 12:18
[0061] 15/06/93 12:19
[0062] 15/06/93 12:23
[0063] 15/06/93 12:30
[0064] 15/06/93 12:33
[0065] 15/06/93 12:42
[0066] 15/06/93 12:43
[0067] 15/06/93 12:44 2 2 1 2 1 1 1 1 2 2 2 2 0045 0052 EDITOR - 1 EDITOR - 1 0045 0045 0120 MASTER Door Left Open Door Closed Access Authorised No Access: Level Editor On Editor Off Request to Exit Access Authorised Access Authorised Automatic Unlock No Access: Time Unauthorised Access Local Alarm Accepted Alarm Cleared 17047 Ver 1.8 DRAFT C 40 Easikey 1000 Other Functions Printout of the database including personnel, keycode, time profiles and door data. Printout of transactions applying to an individual key. 14.5.2 User Selected Reports There are 3 features accessible to the user from the PRINT/8 key. Clearing all transactions in the controller. 14.5.3 Printing the Database:
This function prints personnel, time profile and door data. The printer will automatically go to the top of a new page, the display will show the progress of the report. Press ESC to interrupt the printout. 1 Present an editor key to the controller reader. 2 3 4 SEL?
PrdA db / Prnt tP / Prnt dr / Prnt SEL?
5 Sample Database Printout Easikey 1000 SYSTEM Press PRINT/8 Press SEL/SAVE to start database printout. .printing personnel database
..printing time profiles
..printing door data Press ESC to leave Editor mode. PERSONNEL PRINTOUT 05/06/93 11:10 page 01 ID KEYCODE DOORS TIME 1 TIME 2 TIME 3 0001 12345678 0002 BD5B54E6 0003 6B0604BC 0045 174DE464 0052 0A032469 0064 D803E43D 1,2 1 2 1,2 1 1,2 08:30 17:30 MTWTF-- 08:30 12:00 -----S- 00:00 00:00 -------
08:30 17:30 MTWTF-- 08:30 12:00 -----S- 00:00 00:00 -------
20:00 23:59 MTWTF-- 00:00 08:00 -TWTFS- 00:00 00:00 -------
Easikey 1000 SYSTEM TIME PROFILE PRINTOUT RECORD STATUS TIME 1 TIME 2 TIME 3 1 2 3 4 5 6 7 8 09:00 17:00 MTWTF-- 00:00 00:00 ------- 00:00 00:00 -------
On 08:30 17:30 MTWTF-- 08:30 12:00 -----S- 00:00 00:00 -------
On 07:00 09:00 MTWTFS- 00:00 00:00 ------- 00:00 00:00 -------
On On 20:00 23:59 MTWTF-- 00:00 08:00 -TWTFS- 00:00 00:00 -------
Off 00:00 00:00 ------- 00:00 00:00 ------- 00:00 00:00 -------
Off 00:00 00:00 ------- 00:00 00:00 ------- 00:00 00:00 -------
Off 00:00 00:00 ------- 00:00 00:00 ------- 00:00 00:00 -------
Off 12:30 13:30 MTWTF-- 00:00 00:00 ------- 00:00 00:00 -------
Easikey 1000 SYSTEM DOOR DATA PRINTOUT
= 005
= 010 Door 1 LOCK TIME DOOR TIME TIME PROFILE = 8 OPTIONS DOOR
= Reverse Lock, Request to Exit
= Locked 17047 Ver 1.8 DRAFT C 41 Easikey 1000
= 005
= 010 Door 2 LOCK TIME DOOR TIME TIME PROFILE = 0 OPTIONS DOOR
= Request to Exit
= Locked Other Functions 14.5.4 Printing Selected Key Transactions This will print all the transactions associated with a particular key number currently in memory. The period of time this covers will depend on how long the system takes to generate 1000 transactions. Press ESC to interrupt the printout. 1 2 3 4 5 6 SEL?
PrdA Prtr 0000 tr
/Prnt Present an editor key to the controller reader. Press PRINT/8. Press . Press SEL/SAVE. Type the key number you require, press SEL/SAVE. There may be a short pause while the controller searches through all the transactions. Printing transactions Press ESC to leave Editor mode. SEL?
7 Sample Transaction Printout for User 45 Easikey 1000 SYSTEM PERSONNEL PRINTOUT 05/06/93 11:10 page 01 DATE TIME DOOR USER TRANSACTION 1 1 1 2 0045 0045 0045 0045
[0056] 05/06/93 12:14
[0061] 05/06/93 12:19
[0062] 05/06/93 12:23
[0092] 05/06/93 12:30 14.5.5 Clearing the Transaction Memory This is useful if no printer has been connected for some time and you do not want up to 1000 old transactions to be printed. 1 Access Authorised Access Authorised Access Authorised No Access: Level Present an editor key to the controller reader. Press PRINT/8. Press . 2 3 4 5 6 7 SEL?
PrdA Prtr CLrt CLr /ALL?
SEL?
Press . Press SEL/SAVE. Press VOID/5 followed by SEL/SAVE to erase all transactions from memory. There will be a short confirming beep. Press ESC to leave the Editor mode. 17047 Ver 1.8 DRAFT C 42 Easikey 1000 Appendix A - Equipment Description Easikey 1000 - 2 door controller. Boxed Easikey 1000 with 1.5A PSU (in metal case) Boxed Easikey 1000 with 3.0A PSU (in metal case) Boxed Easikey 1000 with 1.5A ac PSU (in metal case with cutout) Boxed Easikey 1000 with 3.0A ac PSU (in metal case with cutout) 15. Appendix A - Equipment This appendix contains a complete list of all PAC equipment suitable for use with the Easikey 1000. Any PAC item not contained in this appendix should be considered unsuitable for this product. If in doubt, check with PAC Technical Support. PAC Part No. Door Controllers 21446 21450 21448 21453 21452 Easi Readers 20377 20387 20421 20378 20388 PAC Readers 40031 20360 20461 20530 ID Devices 21020 20263, 20264 20270 Magstripe reader Flush mount PAC PIN - stainless steel (brass also available) Surface mount PAC PIN - stainless steel (brass also available) AVR reader module Mullion - black Mullion - white Panel mount reader Vandal resistant - stainless steel Vandal resistant - brass Token - electronic proximity key. Proximity card - plain Proximity card -PAC logo Proximity card - plain (recommended for printing and lamination purposes) Proximity card - plain with mag stripe (not encoded) Proximity card - PAC logo with mag stripe (not encoded) Magstripe hi-co card - uncoded Magstripe hi-co card - coded AVR transmitter 20266 20267 40025 40026 20087 Ancillary Products 20742 Wiegand interface unit 17047 Ver 1.8 DRAFT C 43 Easikey 1000 Appendix B - Using External Readers 16. Appendix B - Using External Readers 16.1 Introduction Two different types of ID device can be used on each Easikey 1000, one of which must be a proximity key (card). System administration is via the built-in reader for proximity keys/cards and via an external reader attached to the controller for other types of ID devices. There are four types of external reader which can be used with the Easikey 1000, namely:
Note PAC Magstripe Readers. PAC PIN Readers. PAC AVR Readers. Wiegand Readers (via PAC Wiegand interface unit). Only one of the above can be used with proximity keys on any system. You cannot have a system which supports both Magstripe readers and PIN readers. Whichever external reader is required (if any) is connected to the external reader connectors
(23-25 inclusive) on the bottom of the controller. Note Where a Wiegand reader is used, this is connected using a PAC Wiegand Interface Kit. 16.2 Magstripe Readers Where a Magstripe reader is connected to the Easikey 1000, card administration is exactly the same as for key administration. For example, to install a card as the master key, the procedure is as described in Section 6.2 section except that instead of presenting the card to the built-in reader it is swiped through the Magstripe reader. 16.3 PIN Readers Where a PIN reader is connected to the Easikey 1000, card administration is exactly the same as for fob administration. For example, to install a card as the master the procedure is as described in Section 6.2. When a PIN reader is used the card must be presented to the reader and the associated PIN entered. Note PIN time profiles are not available To find out what the PIN is for a card:
Step 1 Example Display SEL?
Show/Id 1234 SEL?
2 3 4 5 Note Action Present an editor key to the controller reader. Press PIN/1. Present the key to the reader. PIN number displayed. Press ESC to leave the Editor mode. The PIN must be provided to the User along with card. A duress feature is also available if a PIN reader is used. For example, if the PIN is 1234, a PIN of 1235 can be entered (PIN plus 1). This will open the door but generates an alarm indicating that the door was opened under duress. 17047 Ver 1.8 DRAFT C 44 Easikey 1000 Appendix B - Using External Readers 16.4 AVR Readers Where an AVR reader is connected to the Easikey 1000, administration is exactly the same as for key administration. For example, to add an AVR to the system the procedure is as described in Section 11.2.3. A mini-loop is set up to administer the system. Note Before administering AVRs the AVR option must be set as detailed in Section 7.1.4. 16.5 Wiegand Readers Where a Wiegand reader is connected to the Easikey 1000 via a PAC Wiegand interface unit, card administration is exactly the same as for key administration. For example, to install a card as the master the procedure is as described in Section 6.2. 16.6 Keys Throughout this document reference has been made to "presenting keys". Where other ID devices are used this should be taken to mean:
Magstripe Swipe card through the reader. Swipe card through the reader Wiegand AVR Pass transmitter over the loop. 17047 Ver 1.8 DRAFT C 45 Easikey 1000 17. Appendix C -Transactions Normal Entry and Exit Access Authorised Appendix C -Transactions Entry Authorised Exit Authorised Request to Exit Request for Entry Free Exit Alarms and Warnings Unauthorised Access Anti-tamper Alarm Local Alarm Accepted Alarm Cleared Door Left Open Door Closed RTE Button Held down Repeated Token Use PIN Reader Duress No Access No Access: Unknown ID No Access: Locked Out No Access: Level No Access: Time No Access: Pass Back Door Events Automatic Lock Automatic Unlock Manual Lock Manual Unlock Normal key authorisation. Only used when anti-pass back or interlock is set. Key has entered area. Only used when anti-pass back or interlock is set. Key has left the area. Normal use of Request to Exit switch. Special use of Request to Exit switch, see Section 7. Special use of Request to Exit switch, see Section 7. A locked door has opened without a valid key being used or a Request to Exit switch being pressed. The cable has been cut or the reader removed or disconnected. An editor key has accepted the alarm. The previous alarm condition has been cleared, i.e. the door has been secured or the cable/reader has been reconnected. The door has been left open longer than the pre-set time. The door has closed again after being left open. The Request to Exit switch is being held down. The same key has been presented more than 5 times in succession. The PIN plus one (eg 1235 instead of 1234) has been entered to indicate door opened under duress A key has been presented that is not recognised by the controller. A key with no access at either door has been presented. A key allowed access at the other door has only been presented at this door. A key currently excluded from this door with a time profile has been used. A key has been excluded because it has been used twice on the same reader in succession. The door has locked automatically via a time profile. The door has unlocked automatically via a time profile. An editor has manually locked the door. An editor has manually unlocked the door. 17047 Ver 1.8 DRAFT C 46 Easikey 1000 Appendix C -Transactions Other Events Editor On Editor Off Emergency Override On Emergency Override Off Unit Closed Down Unit Started Up An editor key has entered Editor mode. An editor key has left the Editor mode or the Editor mode has timed-out. Special use of Request to Exit switch. The switch is monitoring an Emergency switch (e.g. a break glass). Special use of Request to Exit switch. The switch is monitoring an Emergency switch (e.g. a break glass). Power removed from the door controller. The door controller has been switched on. 17047 Ver 1.8 DRAFT C 47 Easikey 1000 This page is intentionall left blank. Appendix C -Transactions 17047 Ver 1.8 DRAFT C 48 Easikey 1000 This page is intentionally left blank. Appendix C -Transactions 17047 Ver 1.8 DRAFT C 49 Easikey 1000 Appendix C -Transactions Declaration of Conformity Application of Council Directives Standard(s) to which conformity is declared Manufacturer's Name Manufacturer's Address Type of Equipment Product Equipment I, the undersigned, hereby declare that the equipment specified above conforms to the above directive(s) and standard(s). 73/23/EEC EN55022-B, EN55082-1 PAC INTERNATIONAL LTD 1 Park Gate Close, Bredbury, Stockport, U.K. SK6 2SZ Access Control Systems Easikey 1000 Series Signed Full Name Richie Herkes Date Position 30th August 2001 Managing Director 17047 Ver 1.8 DRAFT C 50 Easikey 1000
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-01-09 | 0.1535 ~ 0.1535 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-01-09
|
||||
1 | Applicant's complete, legal business name |
PAC International Limited
|
||||
1 | FCC Registration Number (FRN) |
0004256657
|
||||
1 | Physical Address |
1 Park Gate Close
|
||||
1 |
Stockport, Cheshire, N/A SK6 2SZ
|
|||||
1 |
United Kingdom
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@americantcb.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
OQL
|
||||
1 | Equipment Product Code |
EK-1000P
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S******** C****** B********
|
||||
1 | Title |
Controller Team Leader
|
||||
1 | Telephone Number |
+44 1********
|
||||
1 | Fax Number |
+44 1********
|
||||
1 |
S******@pac.co.uk
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
PAC INTERNATIONAL LTD
|
||||
1 | Name |
M**** C********
|
||||
1 | Physical Address |
1 PARK GATE CLOSE, BREDBURY
|
||||
1 |
STOCKPORT, CHESHIRE, SK6 2SZ
|
|||||
1 |
United Kingdom
|
|||||
1 | Telephone Number |
++44 ********
|
||||
1 |
r******@pac.co.uk
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
PAC INTERNATIONAL LTD
|
||||
1 | Name |
R******** W****** H********
|
||||
1 | Physical Address |
1 PARK GATE CLOSE, BREDBURY
|
||||
1 |
STOCKPORT, CHESHIRE, SK6 2SZ
|
|||||
1 |
United Kingdom
|
|||||
1 | Telephone Number |
++44 ********
|
||||
1 |
r******@pac.co.uk
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Access controller with low range proximity reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS United Kingdom Ltd.
|
||||
1 | Name |
S****** T********
|
||||
1 | Telephone Number |
44-0-********
|
||||
1 | Fax Number |
44-0-********
|
||||
1 |
s******@sgsgroup.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CE | 0.15350000 | 0.15350000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC