FCC ID: 2ALBDPT10 Telematic Device

PT10 OEM User Manual Version 1.0 Table of Contents PT40 OEM USER MANUAL 4.1 4.2 4.3 5.1 5.2 5.3 5.4 1 Version Tracking ................................................................................................... 4 2 OEM Notice ............................................................................................................... 5 3 Product Overview .................................................................................................. 6 4 External Interfaces ................................................................................................ 6 Overview ....................................................................................................................................... 6 Pinout ............................................................................................................................................ 6 USB-C ............................................................................................................................................. 6 5 LEDs ........................................................................................................................... 7 Overview ....................................................................................................................................... 7 ORANGE LED ................................................................................................................................. 7 GREEN LED ..................................................................................... Error! Bookmark not defined. BLUE LED ....................................................................................................................................... 7 6 Power Supply .......................................................................................................... 7 7 Testing Environment ............................................................................................ 8 8 Software Tools ........................................................................................................ 8 9 Initial setup ............................................................................................................. 8 10 Control Interface .................................................................................................... 9 11 Cellular Information ............................................................................................. 9 11.1 Query normal ................................................................................................................................ 9 11.2 Query no SIM .............................................................................................................................. 10 12 GPS Information ................................................................................................... 10 13 Input/Outputs ....................................................................................................... 11 13.1 Overview ..................................................................................................................................... 11 13.2 Digital inputs ............................................................................................................................... 11 13.3 Open-drain outputs..................................................................................................................... 11 13.4 Connecting a load ....................................................................................................................... 12 Pacific Track, LLC 2 PT40 OEM USER MANUAL 13.5 1-Wire interface .......................................................................... Error! Bookmark not defined. 13.6 Serial interface ............................................................................................................................ 12 Pacific Track, LLC 3 PT40 OEM USER MANUAL 1 Version Tracking Version 0.1 1.0 Date 11/19/2021 5/25/2019 Change Initial Version Published Pacific Track, LLC 4 PT40 OEM USER MANUAL 2 OEM Notice This user manual is provided to OEM and Resellers of Pacific Tracks products. It is not intended to be used by end users. OEM and Resellers should include the following notices in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed:

Product Marketing Name: Telematics Device 23259-PT10 FCC ID: 2ALBDPT10 IC :

This equipment complies with FCC radiation exposure limits and Canada radiation RF exposure limits set forth in CFR 47 Sections 2.1091 and ISED RSS-102 for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements de la FCC et aux limites d'exposition aux rayonnements RF du Canada nonces dans les sections 2.1091 du CFR 47 et ISED RSS-

102 pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet metteur ne doit pas tre colocalis ou fonctionner en conjonction avec une autre antenne ou metteur. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Pacific Track, LLC 5 PT40 OEM USER MANUAL 3 Product Overview The PT10 is a cellular device that can be used for telematics application. The PT10 can be powered with a basic power-only connection (aka 2-wire). The PT10 can also monitor the ignition pin (3-wire installation). The PT10 can be programmed to run complex applications schemes based on locally generated events and states using the VTX web-based platform. 4 External Interfaces 4.1 Overview The PT10 uses a single external interface. The interface is a 7-pin connector Molex Micro-Fit 3.0 P/N 04365-00722. The mating connector is the Molex 04645-0700. Pacific Track has approved the substitution of the Molex connector with other brands that have met a series of tests conducted internally. 4.2 Pinout The pinout of the connector is specified is the following table:

PIN 1 2 3 4 5 6 7 FUNCTION UART TX UART RX OUTPUT INPUT 2 INPUT 1 POWER GND POWER IN DETAILS / RANGE Accessories UART Transmit Accessories UART Receive Open Drain Output 3 to 32V 3 to 32V 0V 6 to 32V The device should be powered from pins 6 and 7. 4.3 Micro USB For debugging purpose, the PT10 also includes a Micro USB connector. The connector can be used to connect USB 2.0 equipment (PC, laptop or smartphone) to the PT10 during provisioning. Pacific Track, LLC 6 PT40 OEM USER MANUAL Note that the PT10 cannot be powered from the USB-C connector nor can the connector provide power to a connected accessory. 5 LEDs 5.1 Overview The PT10 includes two LEDs (ORANGE and BLUE). Note: This document describes the current default behavior of the LEDs. This behavior can be changed by the user. 5.2 ORANGE LED The following table summarizes the functionality of the ORANGE LED;

LED State Off Blinking On Meaning GPS power management engaged. GPS is turned off, GPS backup clock in ON. GPS is in acquisition mode GPS signal is locked Note: The GPS may go into power management mode for example when the PT10 detects that the vehicle is not moving. 5.3 BLUE LED The following table summarizes the functionality of the BLUE LED;

LED State Off One blink / 10s Two blinks / 10s Fast blink Slow Blink On Meaning The cellular subsystem is off The cellular subsystem is not searching No SIM card detected The cellular network has rejected the device The cellular subsystem is searching The cellular subsystem found a network 6 Power Supply The PT10 is powered with a circuit that has been tested to meet the requirements of ISO 16750-2. The circuit provides the following benefit:

Pacific Track, LLC 7 PT40 OEM USER MANUAL 1) Protected against reversed polarity 2) Protected against over current with a resettable fuse 3) Filtered against noise present on the power line 4) Protected against the overvoltage/overshoot present in the automotive and industrial environments with a Transient Voltage Suppressor (TVS) which has a peak power dissipation of 1500W 7 Testing Environment To test the PT10, the following shall be provided:

A reliable power supply (at least one amp at 12V) A SIM card for the targeted operator A PC or laptop A USB cable to connect a PC or laptop to the PT10 such as this one:

8 Software Tools It is recommended to use a terminal emulation program called Tera Term. The latest version is 4.106 and it can be found at: https://osdn.net/projects/ttssh2/releases/

Do not use other branches of the Tera Term projects such as 2.x or 3.x 9 Initial setup Insert the SIM card in the PT10 1. 2. Power the device 3. Connect the USB connector to the PC/Laptop and to the device 4. Start Tera Term 5. Click on File New Connection Serial and select:

COMxx: Quectel NMEA Port (COMxx) 6. Click OK 7. Click on Setup Serial Port and select the following options:

Speed: 115200 Data: 8 bit Pacific Track, LLC 8 PT40 OEM USER MANUAL Parity: none Stop bits: 1 bit Flow control: none 8. Click OK 9. It might be convenient to store those settings by going to:

Setup Save setup and click Save 10 Control Interface At that point the user should be able to enter commands to control and query the device. Note that there is no echo unless the command character (!) is first entered. To test the interface, type the following commands:

!H<cr>

(<cr> is the carriage return character which is sent when the Enter key is pressed) 11 Cellular Information 11.1 Query normal The Cellular interface can be queried with the following command:

!CI<cr>

Here below is an example answer to this query:

!CI Model: BG95 Version: M1 Rev: LAR02A04 IMEI: 359215101130863 SIM Status: OK ICCID: 89148000004519458528 NETWORK Registered: Yes Roaming: No RSSI: 21 Socket T: 16386 Socket M: 16385 Network: 311480 LAC: 2B03 CID: 00A90001 Pacific Track, LLC 9 PT40 OEM USER MANUAL Band: 13 OK 11.2 Query no SIM If the SIM card is not present or not detected, the following is displayed:

!CI Model: BG95 Version: M1 Rev: LAR02A04 IMEI: 359215101130863 SIM Status: No SIM NETWORK Registered: No OK 12 GPS Information The GPS subsystem can be queried with the following command:

!G<cr>

Here below is an example answer to this query:

GPS STATUS Mode: Power ON Lock: 1 Sat U: 11 Sat V: 14 Time: 09/17/2018 22:12:51 Lat: 48.858343 Lon: 2.294705 Spd: 0.0 Hea: 257 Alt: 23 DOP: 0.8 Age: 1 s RTC: 09/17/2018 22:12:50 Lock: 35 Relock: 35 OK Pacific Track, LLC 10 PT40 OEM USER MANUAL 13 Input/Outputs 13.1 Overview The PT10 includes the following interfaces:

1 Digital inputs 1 Open-drain outputs A serial UART For debugging purpose, these interfaces can be controlled locally. In actual deployments, these interfaces can be controlled remotely over an IP connection or SMS messages 13.2 Digital inputs The inputs can be verified with the following command:

!INP<cr>

The result is as shown below:

2 1 1 0 OK In that case, inputs 2 is high (more than 3V on the input) and inputs 1 is low. 13.3 Open-drain outputs The outputs can be controlled with the following command:

!OUT=<OUTPUT>,<LEVEL>

<OUTPUT> is 1

<LEVEL> is 0 or 1

(1 activates the open-drain which grounds the output)) Example 1: activate output #1:

!OUT=1,1 Example 2: deactivate output #1:

!OUT=1,0 Pacific Track, LLC 11 PT40 OEM USER MANUAL 13.4 Connecting a load The load can be connected to the PT10 output using the following schematic:

Please note the following:

together The POWER applied to the load does not need to be the same as the one powering the PT10 When using separate power sources, the two grounds (PT10 and load) must be connected The diode shown above must be present if the load is not purely resistive. If a non-resistive load such as a relay is switched without the diode, the PT140 output will be immediately destroyed. The maximum voltage for the load is 60V (note that this is different from the maximum voltage supported by the PT10 itself) The maximum current is 3 Amps. 13.5 Serial interface Please contact Pacific Track to discuss the supported devices. Pacific Track, LLC 12

SN XXXXXXXAXXK 100000000 0 0 0 pone yen one Ep i STANLEYe> a mE sa Ye %laSaIe| YolaP'esPe\ WI WON ava MAAN A BOTTOM LABEL SIZE: 33.7mm x 21.7mm SN: 1A1000004068 TU TUT IMEI: 864622048001164 FCC ID: 2ALBDPT10 P/N: PT10 IC: 23268-PT10 Designed in California | Assembled in China

Pacific Track, LLC 1300 Bristol Street North Suite 100 Newport Beach, CA 92660 Web: www.pacifictrack.com Email: admin@pacifictrack.com FCC Agent Authorization Letter Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Date: April 25thth, 2022 SUBJECT: FCC Application for FCC ID: 2ALBDPT10 To Whom It May Concern:

We, the undersigned, hereby authorize David Zhang of Vista Laboratories, Inc. on our behalf, to apply to the Federal Communications Commission for certification of our equipment. Any and all acts carried out by Vista Laboratories, Inc. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Bernard Debbasch, President Pacific Track, LLC

Pacific Track, LLC 1300 Bristol Street North Suite 100 Newport Beach, CA 92660 Web: www.pacifictrack.com Email: admin@pacifictrack.com Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: April 25th, 2022 Confidentiality Request regarding application for certification of FCC ID: 2ALBDPT10 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Type Block Diagrams External Photos Internal Photos Operation Description Parts List/BOM Schematics Test Setup Photos User Manual Permanent Confidentiality:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Bernard Debbasch, President Pacific Track, LLC