mx EFA BlockBotsit#A 868 MaaR:110x147mm = 105gXx Fh PANTONE 267 C pai TECHNOLOGY www.Pai.Technology Limited Warranty information Who is covered:
This warranty is extended only to the original end-use purchaser or the person receiving the product as a gift, and shall not be extended to any other person or transferee. What is covered/For how long:
Unless a different warranty period is stated in the Owner's guide provided with your Pai product, for a period of under 1 year for anything that may be incorporat-
ed into this product from the date of retail purchase by the original end-use purchaser, Pai warrants that this product, when delivered to you in new condition, in original packaging, from a Pai authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. What is not covered:
This warranty does not cover defects resulting from improper or unreasonable use or maintenance; failure to follow operating instructions; accident; excess moisture;
insects; lightning; power surges; connections to improper voltage supply;
unauthorized alteration or modification of original condition; damages caused by inadequate packing or shipping procedures; loss of, damage to or corruption of stored data; damages caused by use with non-Pai products; product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications; and products purchased from unauthorized dealers. What we will do:
During the warranty period, we will, at our sole option, repair or replace (using new or refurbished replacement parts) any defective parts within a reasonable period of time and free of charge. What you must do to obtain Limited Warranty Service:
Return product, with proof of purchase from an authorized dealer. Please contact Pai Technology at customerservice @pai.technology for specific return and shipping instructions. Other conditions:
The provisions of this limited warranty are in lieu of any other warranty, whether expressed or implied, written or oral, including any warranty of merchantability or fitness for a particular purpose. Pai corporation's maximum liability shall not exceed the actual purchase price paid by you for the product. in no event shall Pai be liable for loss of, damage to or corruption of stored data, or for special, incidental, consequential, or indirect damages howsoever caused including without limitation the replacement of equipment and property, and any costs of recovering, programming or reproducing any program or data stored in or used with your Pai product. This warranty is void if the label bearing the serial number has been removed or defaced. Other legal rights:
This limited warranty gives you specific legal rights, and you also may have other rights that vary from state to state or country to country. Some places do not allow limitations on implied warranties or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Regulatory Conformance Hereby, PAl TECHNOLOGY LIMITED declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.Pai.Technology Taking care of your product 1. The battery is not replaceable. 2. This device complies with RSS-247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. 3. It shall be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired. 4. The toy is not to be connected to more than the recommended number of power supplies. 5. Rechargeable batteries are only to be charged under adult supervision. Safety Regulations, safety, and environment:
This document is subject to change without prior notice. Full warranty for this, product and service are fully outlined in the limited warranty statement that accompanies this product and service. Any content in this document does not constitute any additional warranty. Pai Technology Inc. does not assume responsibility for any technical errors, editorial errors, or omissions in this document. About this guide This guide provides regulatory, safety, and environmental information that complies with U.S. regulations. Q Warning! Text that appear like this indicate that if you do not follow the instructions, it may cause personal injury or life hazard. QS Note: Text that appear like this indicate that failure to follow the instructions may result in damage to the equipment or loss of information. Note: Text that appear like this provide important supplemental information.
|. Safe usage QQ Warning! To reduce the risk of injury, and for a better experience, please read the detailed product manual. 1. Regulations This product has one or more wireless components installed. In certain circumstances, wireless devices may be restricted: on airplanes, in hospitals, or near flammable, explosive, or hazardous materials. If you are not certain of the rules regarding your device in these situations, please review the requirements of the area in question before turning on your device. These rules may be located on the underside of your product, or in some other visible location. 2. Battery treatment When the battery expires, do not dispose of the battery with the household garbage. Please dispose of the battery according to your local laws and regulations. 3. Factory-sealed battery The battery can not be easily replaced or removed without affecting the warranty. If there is something wrong with the battery, please contact Customer Service at customerservice @pai.technology. 4. Electromagnetic compatibility statement This product has been tested to comply with the electromagnetic compatibility restrictions, of the United States, but the use of non-company products or other recommended accessories may change and affect the electromagnetic compatibility of the product. Q Warning of the United States, to reduce the risk of injury and for a better experience, please read the detailed product manual. 5. Battery safety Q Warning! To reduce the risk of fire or burn injuries, do not disassemble, crush, or pierce the battery. Do not bring the exterior of the battery into direct contact with circuits. Do not place into fire or water. Q Warning! Keep the battery away from children. 6. Power cable Q Note! To reduce the risk of electric shock or equipment damage, please note the following:
Plug the power cord into an AC outlet that can be pulled out at any time. Unplug the product from the AC outlet by disconnecting the power cord. If the power cord is equipped with a 3-pronged plug, plug the power cord into a grounded 3-hole socket. Do not tamper with the grounding prong on the power cord, as it plays an important safety role. Q Note! The toy shall only be used with a transformer for toys, and the output which is DC 5V is suitable. The transformer is not a toy, and misuse of transformer can cause electrical shock. QS Warning! To reduce safety hazards, this product should be used with a compatible power adapter or a replacement adapter provided by Pai Technology. Other health and safety information This product must be used under direct supervision by adults.
- Please comply with the terms of the warranty to prolong the product's life.
- If the product comes in contact with liquid or other debris, please wipe it away immediately.
- Do not mishandle or throw the product.
- Do not squeeze or apply excessive pressure on the product surface, otherwise it may cause product deformation or damage.
- Do not place this product in or around heating equipment or high voltage equipment, as this may cause product damage or other accidents.
- Clean the product with a soft, dry cloth. Do not wash it.
- This product should not come into contact with water. FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that my cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. FCC Radiation Exposure Statement:
This transmitter must not be co-location or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. IC Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils, radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Instruction manual Welcome to use BlockBots!
Introducing BlockBots, cute programmable bots that you build and control using the latest in Augmented reality. Kids will Create, Program and Play with these adorable new bots. BlockBots combines construction, creativity and coding to keep kids engaged and learning for hours. Product information Name: BlockBots Model: 83101 Suitable age range: 5+ years Battery type: Lithium battery Battery capacity: 1500mAh Input: DC5V Product components: Food contact quality ABS. Importer:
Bigben Connected 65-67 rue de la Victoir 75009 Paris - France Manufacturer:
Pai Technology Limited 11/F, Block 02, 101 Kings Road, North Point, Hong Kong. ZA. WARNING:
Toy contains a small ball. Not for children under 3 yrs. CHOKING HAZARDSmall parts. List of parts S$eeceeeuvwe x2 x2 kDa aad aD 2 eS SH8eERGH)LT Y x x2 kB DD SPLESSITLC LS x4 x1 O GOA x2 x2 x2, x2, xl x2, Pew, x1 x2 x2,
x1 x2
@SOees aa x2 xl x1 x1 xl xl x2 x2, OSE EOAOP PLE xl x1 x1 xl x2 x2 x2 x2, x2, xl x4
-@e:@
x1 x1 xl x1 x2, x1 x2 x2
. Oe x1 x1 x1 x2 x2 Sticker x1 x1 Product introduction 1. Main control block:
Main control block is the core part of BlockBots, electronic components and blocks can be assembled on it to build different movable robots. es Wheel = Effect light Wheel Sensor Charging interface Back Trumpet Bottom 2. Ultrasound block Ultrasound block is just like the eyes of the BlockBots, the robots can identify distance and detect obstacles in the front through this part. Connection line
+ Connection line Distance sensor & effect light 3, Steering engine block Steering engine block provides power to BlockBots, driving rotation of blocks and sensors. Rotation axis, Connection line
!+ Connection line 4, Connection Plug the connector of ultrasound block and steering engine block into random socket on the back of main control block. Plug into either socket a]
Set-Up 1. Download the App Search for BlockBots on the App Store. Download and install the app. Connect the main control Open the APP and click on the connection icon at the top right. The icon shows in grey if connection fails. Turn on Bluetooth of the electronic device following the instructions of the flash, Keep your electronic device within 20cm range with the main control to connect them following the instructions of the fash, Turn on the power on the back of main control following the instructions of the flash. When appears, then you have successfully connected the device with main control The connection icon at the top right turns orange after successful connection, 2. Connect the Bluetooth audio
(Open the APP and click on the connection icon Click on Connect button below Bluetooth at the top right. speaker. Click on Settings in the pop-up to jump to craig pare Oe haus mora sane Bluetooth -. Device cancel BlockBots_AUDIO_wanx Device status will show connected on the page when successfully connected Bluetooth -<
Device Blocktots_AUDIO_soon Bae APP function 2018 All rights reserved. iPhone, iPad, iPad Mini and iPad Pro are trademarks of Apple Inc. Google Play is a trademark of Google Inc. meets ASTM F963, CPSIA, EN71 & ROHS related standard. cev Fa ZX (6) FCC ID: 2APRA83101 IC: 23852-83101 Made in China