FCC ID: 2APRA621002 Main control block

3+

RC!

POLICE CAR Instrucon Manual 62101 List of parts Please clean the product with a clean soft cloth. Lightbar X1 Remote control X1 Main control block X1 Sticker X1 How to Play 1. Set-up Search For Botzees Junior and download the Botzees Junior app. 2. Add a set When prompted, scan This QR code to unlock the Botzees RC!

Police Car features. 3. Unlock more combinaons Click the main image to try out more build combinaons. n a c S Compability:

Android 7+

iOS 11+

Please go to www.pai.technology to check the complete device compability list. This step should be done by an adult or under adult supervision. Note:

1. If the lights or sounds are weak or stop working, change the baeries. 2. If the baeries have run out of power, or if you dont plan to use them for a long me, please remove them from the toy. Properly dispose of the old baeries. Do not place them within reach of children, as they pose a choking hazard. 3. Do not charge non-rechargeable baeries. Children should only charge baeries under adult supervision. The baeries should only be charged aer removing them from the toy. 4. Do not mix old and new baeries. Do not mix dierent types of baeries. 5. Please insert the baeries in the correct posion according to the posive and negave signs. Do not install them backwards. Maintenance 1. Keep this product away from strong sunlight and heat. 2. Do not submerge in water, otherwise it may cause damage to the electronic parts. 3. Please check the baeries and other accessories before use. If you encounter anything broken, immediately stop using the product unl the damage has been repaired. Aside from removing the baery, you should not aempt any further disassembly or maintenance on this product. Preparation Before assembly, please prepare six 1.5 V AA batteries and a Phillips head screwdriver (not included). Button Main control block battery installation diagram Installing the main control block baery

- Use a Phillips head screwdriver. Unscrew the boom screws counter-clockwise and remove the baery cover.

- Insert four 1.5 V AA baeries in the direcon indicated inside the baery compartment.

- Replace the baery cover. Use the screwdriver and screw clockwise to fasten.

- Press the buons on the sides. The main control block indicator lights will ash, and it will enter sync mode. Note: The following steps should be done either by an adult or under adult supervision. Remote control sync

- First, remove the transparent insulaon strap on the back. Conrm the red indicator light in the front has started to ash.

- Conrm the main control block is on, then press any buon on the remote control. The remote control will sync with the main control block.

- Aer sync is complete, the light on the remote control will automacally go out. If the indicator light connues to ash aer 30 seconds, it means sync was not successful. Please re-start the sync process again. (See the Re-start sync page.)

*If the remote control isnt used in 20 minutes, the main control block and remote control will go into standby mode. To use again, please rst press the buon on the side of the main control block. Installing and changing the batteries Note: The following steps should be done either by an adult or under adult supervision. Place the positive pole of the battery on the left and install it vertically. Main control block:

Four 1.5 V AA batteries Remote control:

Two 1.5V AA batteries Lightbar: 3 1.5V AG13/LR44 button batteries Changing the baeries FAQs Q: What do I do if the car wont start?

Use a Phillips head screwdriver. Unscrew the screws on the baery cover counter-clockwise. Remove the baery cover and take out the baeries. Insert the baeries according to the posive and negave signs inside the baery compartment. Replace the baery compartment cover and screw clockwise to fasten. Q: How do I determine if the car baery is about to run out?

A: The amount of baery power le can be determined by the following situaons:

Situaon 1: The cars speed is noceably slow. Situaon 2: Its acons are slow or unresponsive. Situaon 3: It wont start up. A. There are a few possibilies. Conrm which one applies:

1. The baeries have no power. Please change them. 2. The baeries are installed backward. Please re-install them. 3. The on-o switch isnt switched on. Please try turning it on again. 4. The rst me you used the remote control it wasnt synced. Please sync it according to the direcons. 5. You didnt remove the transparent insulaon tape from the remote control. Please remove it. 6. The wheels have been stopped up with a foreign object, e.g., hair or trash. Please clear it away. 7. If youre sll having issues, please contact Customer Service. How to re-sync Note: The following steps should be done either by an adult or under adult supervision. If you discover that the remote control indicator light or main control block indicator light is connuously ashing quickly, or if the remote control has no eect on the main control block, please re-start the sync process. 1. Remove the baery covers of the main control block and the remote control. Remove the baeries. 2. Re-install the baeries of the main control block according to the posive and negave signs indicated inside the baery compartment, then do the same for the remote control. 3. Press the main control block buon, then press any buon on the remote control to start sync. Aer sync is successful, the main control block and remote control indicator lights will turn o automacally. FCC Compliance Statement Please take aenon that changes or modicaon not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operaon. Customer service information Thank you for choosing Pai Technology. We want to ensure that you have the best experience with our products. If you encounter any technical dicules or issues with this product, please email our customer service team at cs@putao.com Product information Product name: Botzees RC! Police Car Model: 62101 Suitable age range: 3+ years Pai Technology Inc. 520 Broadway, Santa Monica, California, USA. 90401. Patent and trademark 2020 All rights reserved iPhone, iPad, iPad Mini and iPad Pro are trademarks of Apple Inc. Meets ASTM_F963, CPSIA related standards. Made in China Remote control FCC ID: 2APRA621001 Main control block FCC ID: 2APRA621002 www.pai.technology

FCC ID: 2APRA621002 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

SG Inc. SGS North America 620 Old Peachtree Road SUITE 100 Suwanee, United States Georgia 30024 Applicant Declaration Applicant Legal Business Name PAI TECHNOLOGY LIMITED Address Room H, 18/F, Ning Jin Centre. 7 Cheng Yip Street, Kwun Tong, Kowloon, Hong Kong Grantee Code 2APRA FCCID 2APRA621002 Authorized Contact Name Haixin.Zhu Contact Email zhuhaixin@putao.com Contact Phone

+86 021-54679188 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) in accordance knowledge and belief. with 47CFR2.911

(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my b) in accepting this application, a Grant of Equipment Authorization is responsible the Applicant for:

issued by a TCB, under the authority of the FCC, as a result of the representations made in

(1) labeling

(2) compliance

(3) compliance the equipment statement of the equipment with the exact FCC ID as specified in this application, to the applicable rules, labeling rules, with the applicable technical pursuant c) if the Applicant that production is not the actual units of this equipment arrangements of the equipment, appropriate to comply with the FCC's technical manufacturer will continue requirements have been made with the manufacturer to ensure d) in accordance with 47 CFR 2.909 and KDB394321, the as specified party and agree to abide by their responsibilities under 47 CFR 2.909 and KDB394321. Applicant has read, understood and agrees to accept that they are the responsible e) in accordance with 1S017065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant

(2)the Applicant

(3)the Applicant FCC and/or software required understands, shall make provisions shall, upon request ISED as instructed. for evaluation, accepts and agrees that a sample may be requested to always have a production by SGS, at the Applicant's expense, The sample shall include review, certification and audit surveillance all support sample available provide devices, testing. for surveillance by SGS, FCC and/or sample of theequested software, accessories by SGS. upon request a production cables, of products ISED. to SGS, product or other hardware certified or f) neither the Applicant 5301 of the Anti-Drug 47CFR 1.2002(b) for the definition of a "pa'forthese purposes nor any party to the application Abuse Act of 1988, 21 U .S.C. 862 because is subject to a denial of Federal of a conviction benefits, for possession or distribution FCC benefits, pursuant of a controlled to Section See substance. that includes g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, lnc.(TCB) terms and condions Link to CF Rs: htt s://www.fcc. Link to KDBs: https://apps.fcc.qov/

https://www.ic. Link to RSP-100:

oetcf/kdb/index.cfm qc.ca/eic/site/smt-

qst.nsf/enq/sf01130.html ov wireless/bureau-divisions/techn I ies-s tems-and-innovation-division/rules-r 7 lations-title-4 Applicant Signature:

-,/ , Print Name:

HaiXin Zhu Title:

Certification Manager Date: 2021-01-04 I

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

PAI TECHNOLOGY LIMITED TO: Federal Communication Commission Date: 2021-01-04 Authorization Branch Equipment 7 435 Oakland Columbia, MID 21046 Mills Road Regarding:

FCC ID 2APRA621002 To whom it may concern:

We, the undersigned, application for equipment documents relating the same effect as acts of our own. hereby authorize Parlam Zhan to act on our behalf in all manners relating to signing to the FCC ID above, including authorization with respect of all to these matters. Any and all acts carried out by the agent on our behalf shall have We, the undersigned, FCC benefits, hereby certify that we are not subject 5301 of the Anti-Drug to a denial Abuse Act of federal of 1988, 21 U.S.C. 853(a). to Section pursuant benefits, that includes Where our agent signs the application for certification for complying resides with PAI TECHNOLOGY with the terms and conditions LIMITED. on our behalf, I acknowledge that all responsibility for Certification, as specified by SGS North America, Inc., still This authorization is valid until further written notice from the applicant. Name (Printed):Haixin.Zhu Title: CElrtification Manager Signature

,-C>( ;t.... On behalf of Company:

PAI TECHNOLOGY LIMITED Telephone: +86 021-54679188

PAI TECHNOLOGY LIMITED To:

North SGS 620 Old SUITE Inc. America Road Peachtree 100 Suwanee, United States Georgia From: PAI TECHNOLOGY LIMITED Room H, 18/F, Ning Jin Centre, 7 Cheng Yip Street, Kwun Tong, Kowloon, Hong Kong Regarding:

Confidentiality Request regarding application for FCC ID : 2APRA621002 LONG TERM CONFIDENTIALITY Section to 47 Pursuant the treatment of confidential referenced above. CFR and 0.457 the of 0.459 listed below, documents the commission's rules, certification the associated hereby application applicant request with contain harmful proprietary of the business to the released not applicant. information to the public. Public disclosure of this Schematic(s) Diagrams Block Operational documents The information Descriptions above prove may Sincerely, Signature2 Name (on file with the FCC associated with the Grantee Code): Haixin.Zhu Printed Title Manager Company Name PAI TECHNOLOGY Certification LIMITED