FCC ID: 2APRA220001 Remote control

3+

GO!

DINO Instrucon Manual List of Parts Please clean the product with a clean and so cloth. How to Play 1. Search For Botzees Junior and download the Botzees Junior app. 2. When prompted, scan This QR code to unlock the Botzees GO!

Dino features. 3. Select a Dino and follow the visual step-by-step direcons to build. n a c S Compability:

Android 7+

iOS 11+

Please go to www.pai.technology to check the complete device compability list. Please read this noce before using this product. Note: This step must be done under adult supervision, or completed by an adult. Baery installaon and replacement: You will need two (2) 1.5v AA baeries, two (2) 1.5v AAA baeries and a cross head screwdriver. (Baeries and screwdriver are not included in the package). Install the main control block baeries

-Use a cross head screwdriver to unscrew the boom screws counter-clockwise and remove the baery cover.

-Insert two (2) 1.5v AA baeries in the direcon indicated inside the baery compartment.

-Replace the baery cover and screw clockwise to fasten with a screwdriver.

-Press the buon at the boom. The main control block indicator lights will ash if you have installed the baeries correctly. Install the remote control baeries

-Use a cross head screwdriver to unscrew the boom screws counter-clockwise and remove the baery cover.

-Insert two (2) 1.5v AAA baeries in the direcon indicated inside the baery compartment.

-Replace the baery cover and screw clockwise to fasten with a screwdriver. FAQ How can I tell if the baery is almost exhausted?

1: The speed is signicantly slower 2: It gets stuck when moving/not enough power 3: It cannot be turned on What do I do if the main control unit does not turn on?

Please check to conrm:

1. Are the baeries exhausted? If baeries are exhausted, please replace the baeries 2. Are the baeries installed correctly? Check the polarity of the baeries; if installed incorrectly, please re-install the baeries to ensure they match the required polarity 3. Is the power turned on? Please try again aer powering on the main control block 4. Has the remote control been synced with the main control block? If they have not been synced, please have them synced and then retry. 5. If there is sll a problem, please contact customer service. Indicator Light Main control block indicator light Sync the Remote control

-Make sure the red indicator light in the front has started to ash aer installing the baeries.

-Turn on the main control block. Then press any buon on the remote-control to sync with the main control block.

-If syncing is complete, the indicator light on the remote control will automacally shut o. If the indicator light connues to ash for another 30 secs, please re-sync. If the remote control isnt used for 20 minutes, the main control block will go into standby mode. To use again, please press the buon at the boom of the main control block. How to Re-sync If the remote control indicator light or main control block indicator light ashes quickly, or the remote control is not able to control the main control block, please restart the syncing process. 1. Remove the baery covers of the main control block and the remote control. Remove the baeries. 2. Re-install the baeries and put back the baery cover. 3. When the indicator light on the main control block is ashing, press any buon on the remote control to start syncing. Aer syncing is done, the remote control indicator lights will turn o automacally. Fun Acons / Sound Eects Forward (depending on orientaon) Reverse (depending on orientaon) Sound On / O Speaker Power switch You can also customize the remote control!

Be sure to have the remote control and main control block oriented in the same direcon. Parent ps Switch to dierent leg blocks to experience dier-

ent ways to move!

Works best on smooth and hard surfaces

(such as oors, desktops, etc.) Parent ps Try to build with the so blocks in dierent sengs to spark your kids creavi-

ty!

Triceratops Age of life Late Cretaceous (68-65 million years ago) Feeding habits Herbivorous Features Triceratops means three-horned-face. This dinosaur is made disncve by the three horns on the skull that sit upon a large, bony frill. Triceratops has a large four-legged body that is similar to the modern rhinoceros. Triceratops and tyrannosaurus lived in the same period, so the role of its horns and shields were likely to defend against large predators. While the horns were sharp, they could also be broken during collisions. Triceratops large bony frill protected its neck, but it also helped regulate the dinosaurs body temperature. Triceratops was one of the latest dinosaurs that lived in the late Cretaceous. It was an herbivorous dinosaur. The remains of the triceratops were only found in the Rocky Mountains of North America and the eastern foothills. In the late Cretaceous period, this area was a wooded plain. 2.9-3m 1.8m Age of life Late Cretaceous (68-65 million years ago) Feeding habits Carnivorous Features Tyrannosaurus is the most popular of all dinosaurs and was one of the largest land carnivores in history. Tyrannosaurus walked on its two hind legs, and its arms were small with only two claws on each hand. The arms were too short to touch each other and did not provide much help while hunng. Tyrannosaurus had extremely powerful jaws and sharp, thick teeth that would tear through esh and crush bones. Tyrannosaurus rex Tyrannosaurus rex belonged to the largest type of Tyrannosaurus. The body was about 11.5-14.7 meters long. The average hip height was about 4 meters with the maximum up to about 5.2 meters. The head height was up to nearly 6 meters. The average weight was about 9 tons with the maximum about 14.85 tons. The maximum head length was about 1.55 meters. The bite force was generally 90,000 to 120,000 Newtons, and the biggest bite force of the mouth end could reach about 200,000 Newtons. It was also the thickest carnivorous dinosaur. 1.8m 4.6-6.1m Ankylosaurus Age of life Late Cretaceous (68-65 million years ago) Feeding habits Herbivorous Features Ankylosaurus was the largest dinosaur of the Ankylosaurus family in the late Cretaceous period in the United States and Canada. Its head was wide and at. The face-covering thick shield and the triangular spines on the upper side of the head made it as if there was a steel-like helmet on the head. The tail straight was like an iron rod, and the tail hammer was disncvely at. Ankylosaurus is believed to have been a slow-moving animal, but able to make quick movements when necessary. Ankylosaurus was a typical representave of armored dinosaurs, with the armor growing on the surface of the body that helped it resist aack from carnivorous dinosaurs. At the same me, some Ankylosauruses also had a bone hammer on their tail, which could shake to hit the carnivorous dinosaur. The body length of an Ankylosaurus could reach 5 to 6 meters, making it as long as a car. It weighed about 2 tons, causing a relavely slow movement. The armor was Anklyosau-

rus the best defensive weapon. 1.8m 1.7m 1. Avoid exposing this product to sunlight or heat. 2. Do not immerse toys in water. 3. Please check the baeries and other accessories before use. If any damage is found, please stop using it immediately unl it is completely repaired. Except for baery disassembly and assembly, consumers must not disassemble or repair this product in any way. FCC Compliance Statement Please take aenon that changes or modicaon not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operaon. Warnings Maintenance Guide 1. Please replace the baeries under adult supervision. 2. Please remove the baeries from the toy if you plan to not use the toy for a month or more. 3. Please dispose of the replaced baeries properly. 4. This product can only use alkaline baeries, other types of baeries (nickel cadmium, carbonic acid included, etc.) may not be used. 5. Do not mix new and old baeries. Do not mix alkaline, standard (carbon-zinc), or rechargeable baeries. 6. The baeries must be inserted with the correct terminals. 7. Non-rechargeable baeries cannot be charged; rechargeable baeries can only be charged under the supervision of an adult, and should be removed from the toy before charging. 8. Do not expose the toy to heat. 9. This product should use the baeries recommended in this manual or the baeries with the same specicaons. 10. For other informaon, please visit www.pai.technology Safety Other health and safety informaon

- This product must be used under direct supervision by adults.

- If the product comes in contact with liquid or other debris, please wipe it away immediately.

- Do not mishandle or throw the product.

- Do not squeeze or apply excessive pressure on the product surface, otherwise it may cause product deformaon or damage.

- Do not place this product in or around heang equipment or high voltage equipment, as this may cause product damage or other accidents.

- Clean the product with a so, dry cloth. Do not wash it.

- This product should not come into contact with water. Product informaon Name: Botzees GO! Dino Model: 22002 The package contains: 103 pieces, main control block, remote control Suitable age range: 3+ years Main material: ABS Pai Technology Inc. 520 Broadway, Santa Monica, California, USA. 90401. Customer service information Thank you for choosing Pai Technology. We want to ensure that you have the best experience with our products. If you encounter any technical dicules or issues with this product, please email our customer service team at customerservice@pai.technology. Patent and trademark 2020 All rights reserved iPhone, iPad, iPad Mini and iPad Pro are trademarks of Apple Inc. Meets ASTM_F963, CPSIA related standards. Made in China Remote control FCC ID: 2APRA220001 Main control block FCC ID: 2APRA220002 www.pai.technology

Label location RemarkThe product is small to place the FCC statement on the product and it be placed in the user manual which the device is marketed.

SGS SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration NOTE: This declaration cannot be Seen ecw Ne Tem RCT) Rex eTy ned by an authorized person listed in the FCC database Applicant Legal Business Name PAI TECHNOLOGY LIMITED Address Room H, 18/F, Ning Jin Centre, 7 Cheng Yip Street, Kwun Tong, Kowloon, Hong Kong LCT eTal(\-m@reyel- 2APRA FCC ID 2APRA220001 Authorized Contact Name HaiXin Zhu Contact Email zhuhaixin@putao.com Contact Phone I, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of aN knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the Fe] Terai t(e) gM ttle =a]

this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicabie rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with 1SO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant sha//, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) _ the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: htt s:/Avww.fec. ov/wireless/bureau-divisions/technolo ies-s stems-and-innovation-division/rules-re_ulations-title-47 Link to KDBs: htt s://a_s.fcc. ov/oetcf/kdb/index.cfm eS ORS] oa UO Mace AMAA Rem eRer-T (letra eine st.nsfien /sf01130.html Applicant Signature: Date:2020.05.15 tale NT EP San) ance Manager Applicant Declaration Rev:0.0

PAI TECHNOLOGY LIMITED TO: Federal Communication Authorization Commission Branch Equipment 7 435 Oakland Columbia, Mills MID 21046 Road Regarding:

FCC ID2APRA220001 To whom it may concern:

Date: 2020. 05. 15 We, the undersigned, application documents the same effect as acts of our own. hereby for equipment relating authorization authorize Zhan to act on our behalf Parlam with respect to the FCC ID above, to of all signing out by the agent on our behalf shall in all manners including Any and all acts carried relating have to these matters. We, the undersigned, FCC benefits, pursuant that we are not subject 5301 of the Anti-Drug hereby certify to Section to a denial of federal benefits, that includes Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for complying resides with PAI TECHNOLOGY with the terms and conditions LIMITED for certification on our behalf, I acknowledge that all responsibility for Certification, as specified b y SGS North America, Inc., still This authorization is valid until further written notice from the applicant. Name (Printed):

HaiXin Zhu Title:

Manager s;gnatu,e:

On behalf of Company:

PAI TECHNOLOGY LIMITED Telephone:

+86 021-54679188

PAI TECHNOLOGY LIMITED To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: PAI TECHNOLOGY LIMITED Room H, 18/F, Ning Jin Centre, 7 Cheng Yip Street, Kwun Tong, Kowloon, Hong Kong Regarding: Confidentiality Request regarding application for FCC ID LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Schematic(s) Block Diagrams Operational Descriptions Sincerely, Serle lon zh. eee AiCoxo Mm Nic latto mth a i Aals|

Manager PA! TECHNOLOGY LIMITED Z2APRA220001