FCC ID: ACJ9TAWX-CC411A DECT 6.0 Center Module (with 1 Wireless modules)

by: Panasonic Corporation of North America latest update: 2016-07-19 model: 9TAWX-CC411A

One grant has been issued under this FCC ID on 07/19/2016 (this is one of ninety-six releases in 2016 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked warrantee terms, password defaults, instructions, troubleshooting guides, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 8
1 ~ 2016-07-19 11

app s				submitted / available
1	Users Manual	Users Manual	pdf	5.32 MiB	/ February 09 2016
1		Cover Letter(s)	pdf
1		External Photos	pdf		/ February 09 2016
1		Internal Photos	pdf		/ February 09 2016
1		ID Label/Location Info	pdf
1		RF Exposure Info	pdf
1		Test Report	pdf
1		Test Setup Photos	pdf		/ February 09 2016

exhibit
download
text

Users Manual

Users Manual

pdf

5.32 MiB

/ February 09 2016

Operating Instructions <Installation Guide>

Installation Instructions provided Center Module Model No. WX-CC411A WX-CC412A E n g l i s h F r a n a i s Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this Operating Instructions. WX-CC411_PGQX2068ZA_IG.indb 1 2016/05/18 13:30:24 ENGLISH VERSION Safety precautions FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from persons body

(excluding extremities: hands, wrists, feet and ankles). This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. WARNING:

pp This apparatus must be earthed. pp Apparatus shall be connected to a main socket outlet with a protective earthing connection. pp The mains plug or an appliance coupler shall remain readily operable. pp To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. pp The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus. pp All work related to the installation of this product should be made by qualified service personnel or system installers. pp To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. pp The connections should comply with local electrical code. pp The risk of hearing impairment due to exposure to excessive sound levels may be reduced by listening at lower volumes and for shorter durations. pp Operating near 1.9 GHz electrical appliances may cause interference. Move away from the electrical appliances. pp This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. pp MEDICAL:

Consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range of 1.92 GHz to 1.93 GHz, and the power output level is 115 mW (max.).) Do not use the unit in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. pp The installation shall be carried out in accordance with all applicable installation rules. pp To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. 2 WX-CC411_PGQX2068ZA_IG.indb 2 2016/05/18 13:30:24 Safety precautions For U.S.A. The model number and serial number of this product may be found on the surface of the unit. You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. CAUTION:

The FCC ID number for this radio equipment is listed below. For U.S.A. FCC ID: ACJ9TAWX-CC411A FCC ID: ACJ9TAWX-CC412A For U.S.A. This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply. See www.dtsc.ca/gov/hazardouswaste/perchlorate/

A lithium-ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. CAUTION:

pp Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. pp These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. pp Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. pp Shielded (STP) LAN cables must be used with this unit to ensure compliance with EMC standards. ICES-003 CAN ICES-3(A)/NMB-3(A) For Canada RSS-Gen pp Under Industry Canada regulations, this radio For Canada transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Descriptions of graphic symbols This symbol indicates an alternating current (AC). IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10) Only use attachments/accessories specified by the manufacturer. 11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12) Unplug this apparatus during lightning storms or when unused for long periods of time. 13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 WX-CC411_PGQX2068ZA_IG.indb 3 2016/05/18 13:30:24 English Screen operations .......................................................... 29 Basic screen operations ............................................... 29 Entering the settings .................................................... 29 Inputting characters ..................................................... 30 Inputting the date and time .......................................... 30 Adjusting the volume level ............................................ 30 Operating procedures .................................................... 31 Basic operations .......................................................... 31 ID Registration ............................................................. 31 Convenient Functions (Other Functions) ..................... 33 Troubleshooting .............................................................. 36 Specifications ................................................................. 37 Licenses .......................................................................... 39 Contents Safety precautions ........................................................... 2 Before use ......................................................................... 5 Preface ........................................................................... 5 Features ......................................................................... 5 System diagram ............................................................. 5 Operation ....................................................................... 6 Concerning the Operating Instructions .......................... 7 Standard accessories .................................................... 7 Trademarks and registered trademarks ......................... 7 Abbreviations ................................................................. 8 Limitation of liability ........................................................ 8 Disclaimer of warranty .................................................... 8 Network security ............................................................ 8 Precautions ....................................................................... 9 Operating precautions .................................................... 9 Installation precautions ................................................ 10 Major operating controls and their functions .............. 11 Front panel ................................................................... 11 Terminal block .............................................................. 12 Side panel .................................................................... 13 Screen .......................................................................... 14 Description of screens ................................................... 15 Basic screen ................................................................ 15 Setting Information screen ........................................... 16 Password input screen ................................................. 18 Camera monitoring screen ........................................... 18 Quick Operation screen ............................................... 19 Related devices .............................................................. 20 Installation procedures .................................................. 21 Deciding on where to install the Center Module .......... 21 Installation .................................................................... 21 Connections .................................................................... 24 Opening the connector cover ....................................... 24 Securing the power cord .............................................. 24 Wiring the Euroblock connector ................................... 25 Attaching the connector cover ...................................... 27 Examples of connections ............................................. 28 4 WX-CC411_PGQX2068ZA_IG.indb 4 2016/05/18 13:30:24 Before use pwPreface The WX-CC411A and WX-CC412A are Center Modules for the wireless intercom systems that are used in drive-thru outlets. pwFeatures pp The WX-CC411A is designed for single lane operation of drive-thru outlets; the WX-CC412A is designed for dual lane operation. pp A system compliant with the 1.9 GHz band DECT* standard is used so the voices of the store personnel and customers are heard clearly and distinctly even in open areas, and interference is minimal, resulting in stable communication.

* Digital Enhanced Cordless Telecommunications pp A high degree of vocal clarity is ensured by a powerful echo canceller and digital noise reduction (DNR). pp The cabinet supports wall-mounting for easy installation. pp The total number of All-in-One Headsets and Belt Packs that can be registered is 32. Up to four operators can communicate at the same time per lane using All-in-One Headsets and Belt Packs. pp This unit has a 7-Type LCD display with a touch panel, and is easy to operate. pp This unit can be connected to an IP network using Ethernet to enable remote control operations to be performed. pp Using an SD card, it is possible to back up and restore the settings, and save messages unique to the outlet. pp The system contains a scheduler to enable the greeter message to be changed at designated times and reminder messages to be played back automatically. pp Up to four Network Cameras made by Panasonic can be registered, and their images can be monitored on this units LCD display. pp Alert signals that have been received can be sent to the All-In-One Headsets or Belt Packs, signals can be output to external devices, and alert emails can be sent to external destinations. pwSystem diagram By connecting the Center Module and All-In-One Headsets or Belt Packs wirelessly, it is possible to communicate between the All-In-One Headsets or Belt Packs or between the All-In-One Headsets or Belt Packs and the customers at the order post. All-In-One Headset WX-CH450 Center Module WX-CC411A/WX-CC412A PAGE

(Communications with other store personnel) Belt Pack WX-CT420 Belt Pack WX-CT420 Order post Microphone Speaker TALK

(Communications with customers) Vehicle detector All-In-One Headset WX-CH450 5 WX-CC411_PGQX2068ZA_IG.indb 5 2016/05/18 13:30:25 English Before use pwOperation This system supports the following operations that are suited to drive-thru customers. Single lane Operations in an environment in which only one order post is installed are referred to as single lane operations. These lane operations are supported by the WX-CC411A. Hello ORDER POST WINDOW E N A L U R H T

E V R D I Dual lane Operations in an environment in which the order posts are installed in parallel are referred to as dual lane operations. With dual lane operations, the vehicle detectors for lane A and lane B operate independently of each other, and when each of these vehicle detectors is set to ON, the greeter message for the lane concerned is played back. These lane operations are supported by the WX-CC412A. Hello LANE B ORDER POST Hello LANE A ORDER POST WINDOW LANE A WINDOW LANE B E N A L U R H T

E V R D I 6 WX-CC411_PGQX2068ZA_IG.indb 6 2016/05/18 13:30:25 Tandem lane Operations in an environment in which the order posts are installed in series are referred to as tandem lane operations. When the vehicle detector for lane A is OFF and the vehicle detector for lane B is set to ON, a tandem lane message urging the customer to move to lane A is played back. These lane operations are supported by the WX-CC412A. Pull forward LANE A ORDER POST LANE B ORDER POST WINDOW LANE A WINDOW LANE B E N A L U R H T

E V R D I pwConcerning the Operating Instructions The Operating Instructions consist of the Operating Instructions <Installation Guide>, Operating Instructions <Setup Instructions> (PDF file) and Operating Instructions <Browser Guide> (PDF file). pp Operating Instructions <Installation Guide> (this manual):

These instructions describe how to connect the Center Module with the required devices, how to install them and how to perform settings (excerpted). pp Operating Instructions <Setup Instructions> (PDF file):

These instructions describe the settings that must be performed before this unit can be used. pp Operating Instructions <Browser Guide> (PDF file):

These instructions explain access from the browser. To read PDF files, you will need Adobe Reader which is available from Adobe Systems. When Adobe Reader is not installed on the PC, download the latest Adobe Reader from the Adobe web site and install it. Important pp Download the Operating Instructions <Setup Instructions/Browser Guide> from the home page given below. http://www.panasonic.com/business/POS-drive-through/manuals.asp pwStandard accessories Power cord ..................................................................... 1 pc. Wall mounting bracket ................................................... 1 pc. Power cord clamp .......................................................... 1 pc. Clamp (for securing the power cord to the wall) ............ 1 pc. Operating Instructions (this manual) .............................. 1 pc. pwTrademarks and registered trademarks pp Adobe, Acrobat Reader, and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. pp SD, SDHC Logo is a trademark of SD-3C, LLC. pp Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners. 7 WX-CC411_PGQX2068ZA_IG.indb 7 2016/05/18 13:30:25 English Before use pwAbbreviations The following abbreviations are used in this document. SDHC and SD memory cards are referred to as SD cards. pwLimitation of liability THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTYS RIGHT. pwDisclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

(4) ANY PROBLEM CAUSING FAILED SIGNAL TRANSMISSION RESULTING IN CONSEQUENTIAL INCONVENIENCE, LOSS OR DAMAGE, ARISING OUT OF CAUSES SUCH AS SYSTEM MALFUNCTION, FAULT, SET UP OR INSTALLATION.

(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY.

(6) PERSONAL INJURY, ANY LOSS OR DAMAGE, ARISING OUT OF THE DROP CAUSED BY THE INCOMPLETE INSTALLATION.

(7) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERAS PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE.

(8) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE. pwNetwork security As you will use this product connected to a network, your attention is called to the following security risks.

(1) Leakage or theft of information through this product

(2) Use of this product for illegal operations by persons with malicious intent

(3) Interference with or stoppage of this product by persons with malicious intent It is your responsibility to take precautions such as those described below to protect yourself against the above network security risks. pp Use this product in a secured network not connected to the Internet. pp If this product is connected to a network that includes PCs, make sure that the system is not infected by computer viruses or other malicious entities (using a regularly updated anti-virus program, anti-spyware program, etc.). pp Protect your network against unauthorized access by restricting users to those who log in with an authorized user name and password. pp After this unit has been accessed by the administrator, all the web browsers must be closed without fail. pp The administrators password must be changed at regular intervals. pp Apply measures such as user authentication for the servers and the connected devices to protect your network against leakage or theft of information, including image data, authentication information (user names and passwords), alarm mail information, FTP server information, etc. 8 WX-CC411_PGQX2068ZA_IG.indb 8 2016/05/18 13:30:25 Precautions pwOperating precautions pp This unit is for indoor use only. It cannot be used outdoors. Avoid installation in a location where the unit will be exposed to direct sunlight for extended periods or near a cooling or heating appliance. Otherwise, deformation, discoloration, malfunctioning and/or problems in operation may result. Operate the unit where it will not be splashed or sprayed by water. pp Handle the unit carefully. This product uses parts that may be damaged by improper handling or storage. pp Do not use this unit in an atmosphere where there are flammable gases. Otherwise, an explosion may occur, resulting in injuries. pp Do not install this unit in a location that is susceptible to salt damage or where corrosive gases are given off. Otherwise, the mounting parts will deteriorate, and this unit may fall, resulting in injury or accidents. pp Tighten the screws and bolts using the designated torque. Otherwise, this unit may fall, resulting in injury or accidents. pp Install this unit on a surface that can bear its weight. Otherwise, this unit may fall or topple over, resulting in injury or accidents. Installation work should be started only after sufficient reinforcement is completed. pp Insert the AC plug completely. If the plug is not inserted completely, fire due to overheating or electric shock may result. Do not use a damaged plug or loose AC outlet. pp Do not pull or insert the AC plug if your hands are wet. Electric shock may result. pp Do not place containers with water or other liquids on top of or around the device. If water or other liquids get inside this unit, a fire or electric shock may result. Immediately disconnect the power plug, and contact the store where you purchased this unit. pp Do not insert foreign objects. If water or metal objects get inside this unit, a fire or electric shock may result. Immediately disconnect the power plug, and contact the store where you purchased this unit. pp Do not disassemble this product. Otherwise, it may cause fire or electric shock. pp Do not do anything that may damage the AC cord or the AC plug. Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. Continuing to use a damaged cord may result in fire, short circuit, or electric shock. If the cord or plug needs to be repaired, consult the store where you purchased this unit. pp Do not attempt to install this unit or proceed with any connections during a thunderstorm. Otherwise, it may cause fire or electric shock. pp Stop operation immediately if the unit emits smoke, excessive heat or abnormal smell. These conditions can cause fire or electric shock. Immediately disconnect the power plug, and contact the store where you purchased this unit. pp Do not use this equipment close to an automatic control equipment like an automatic door fire alarm and so on. Radio waves from this equipment may cause the trouble by a malfunction for automatic equipment. pp Do not put this product close to a medical equipment.

(Do not bring this product into operating room, intensive care units (ICU) and coronary care units (CCU).) Radio waves from this equipment may cause the trouble by a malfunction for medical equipment. pp Ask the store where you purchased this unit to do the installation work. Expertise and experience are required to install this unit. Otherwise, injuries or damage to this unit may result. Be sure to ask the store where you purchased this unit to perform this work. pp Do not put this product on a place with moisture or dirt. There is the risk of injury. Touch panel pp Perform touch panel operations using only one finger. If two or more fingers come into contact with the panel at the same time, the touch panel may not operate properly. pp Do not use a ballpoint pen or other hard-tipped or sharp object, including fingernails, to perform touch panel operations. pp Do not press on the LCD display with too much force. pp Do not use any of the LCD protective films available on the market. (The touch panel may not operate properly.) pp The inside of the LCD display may become cloudy or condensation (droplets of water) may form and the display may not operate properly when the temperature changes suddenly, such as immediately after air-

conditioning or heating has been turned on. If this occurs, leave this unit for about one to two hours before attempting to use it again. To cut the power supply This product has no power switch. To cut the power supply, unplug the power plug of the product from the AC outlet. If it is hard to unplug the power cord due to the installation conditions, connect the power cord of the product to the AC outlet via the circuit breaker of a distribution board or to the AC inlet socket of a power supply control unit. Built-in backup battery Do not expose the built-in backup battery to excessive heat, such as direct sunlight or fire. Camera image update speed The image update speed may be slower, depending on the network environment used, the number and setting of cameras, the subjects, and number of accesses. 9 WX-CC411_PGQX2068ZA_IG.indb 9 2016/05/18 13:30:25 English Precautions SDHC/SD cards pp Before using an unformatted SDHC or SD card, format it first using the Center Module. When a card is formatted, whatever has been recorded on it will be erased. If an unformatted SDHC or SD card or an SDHC or SD card formatted on a unit other than the Center Module is used, it may not work properly or its performance may be compromised. pp When some SDHC or SD cards are used in this unit, they may not work properly or their performance may be compromised. Use of the recommended SDHC and SD cards is recommended. Recommended SDHC and SD cards Manufactured by Panasonic Corporation (sold separately) SDHC cards: 4 GB, 8 GB, 16 GB, 32 GB SD cards: 2 GB

(Excluding miniSD cards and microSD cards) pp In many cases when SD cards are formatted or their data is erased or deleted using the functions of the Center Module or a personal computer, the data on the cards may not be erased completely. Before handling a card over to another party, it is recommended that you use a commercially available PC software application for erasing data to erase the data on the card completely. pp When SD cards are to be disposed of, either break them physically or erase the data on them completely, separate them in the garbage and dispose of them following the regulations that are enforced in the locality concerned. Cleaning the touch panel pp It is recommended that the touch panel be cleaned at regular intervals. pp If there is any noticeable dirt, dust, oil, grease, etc. on the touch panel, clean it immediately. pp Wipe off the dirt or dust gently using a soft dry cloth. pp You may damage the LCD display if you wipe or press the touch panel too forcefully or subject the display to impact or heavy loads. pp Do not use liquid or spray cleaners. The touch panel functions may be impaired as a result. pp Do not allow products made of rubber or PVC to remain in contact with the touch panel for prolonged periods of time. Doing so may cause discoloration or deterioration. pp Do not use benzene, paint thinners, adhesives, alkali- or alcohol-based cleaning agents, glass cleaners, waxes, abrasive cleansers, powdered cleaners, insecticides, etc. Doing so may cause colors and texture to be degraded.

(When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.) 10 pwInstallation precautions WARNING: In order to safeguard against injury, this device must be mounted on a wall, following the steps in the Operating Instructions. Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Avoid installing in the following locations. pp Locations exposed to direct sunlight pp Locations subject to having strong vibration or impact pp Locations which are not level pp Locations under the air conditioner pp Locations near the fryer pp Locations near the grill pp Locations where a chemical agent is used such as a swimming pool pp Locations near magnetic field sources such as a television or speakers pp Locations where condensation forms easily, where temperature changes greatly, humid places pp Locations subject to dust pp Locations subject to water splash or spray pp Locations where radiation or x-ray emissions are produced The accessory power cord is to be used only with this unit. Do not use it for any other devices. Similarly, do not use the power cords of other devices with this unit. Grounding Confirm that the wire is connected from the SIGNAL GND terminal to earth ground. A grounding connection must be made before connecting the power plug or this product to the main power supply. When disconnecting the grounding wire, make sure that the power plug of this product is disconnected from the main power supply. Power supply used The supply voltage of this unit is AC 100 V to 120 V

(50 Hz/60 Hz). Connect this unit to a power supply with a sufficiently high capacity. To cut the power supply This product has no power switch. To cut the power supply, unplug the power plug of the product from the AC outlet. If it is hard to unplug the power cord due to the installation conditions, connect the power cord of the product to the AC outlet via the circuit breaker of a distribution board or to the AC inlet socket of a power supply control unit. Be sure to connect the power cord via any of the following breaking devices:

pp Connect the power cord via a power supply control unit. pp Install the product near a power outlet, and connect the power cord via the power plug. pp Connect the power cord to the breaker with contact gap of 3.0 mm or more of a distribution board. The breaker shall be able to shut down all the poles of the main power supply except the ground protective conductor. Setting the time Before operating this unit, you must set the time. For how to set the time, refer to the Operating Instructions <Setup Instructions>. WX-CC411_PGQX2068ZA_IG.indb 10 2016/05/18 13:30:25 Major operating controls and their functions pwFront panel 1 LCD display This is a 7-Type color LCD display. It indicates this units operational status and details of its operations and settings. 2 Touch panel This is a 7.8-Type touch panel. It is used to operate this unit. 3 Terminal cover This is where the Euroblock (a European-style terminal block) for the audio input/output signals and control input/output signals is housed. WX-CC411_PGQX2068ZA_IG.indb 11 2016/05/18 13:30:25 11 English Major operating controls and their functions pwTerminal block LANE A LANE B CNT COM CNT 1 DEVICE COM CNT COM COM CNT 2 CNT ALERT CNT TxD SG RxD RS-232C VIDEO OUT 10BASE-T 100BASE-TX 4 Power input terminal [AC IN]

Connect the accessory power cord to this terminal. After connecting it, secure the cord using the power cord clamp. (Refer to p.24 Securing the power cord.) 5 Confirmation window [CHECK]

This window is used for confirmation purposes when this unit is installed. 6 Lane A mic input [OUT MIC]

This is connected to the microphone for the order post installed in lane A. 7 Lane A speaker output

[OUT SP (8 ) Class2 Wiring]

This is connected to the speaker for the order post installed in lane A. 8 Lane A line output [LINE OUT]

The same communication that is output from OUT SP of lane A is output. 9 Lane A kitchen mic input [AUX MIC]

This is connected to the gooseneck microphone installed in the lane A kitchen. It is used to speak with the customer who has arrived at the order post for lane A.

: Lane A kitchen speaker output

[AUX SP (8 ) Class2 Wiring]

This is connected to the speaker installed in the lane A kitchen. It is used to speak with the customer who has arrived at the order post for lane A. Lane A line input [LINE IN]

External communications can be broadcast simultaneously to all the All-In-One Headsets or Belt Packs and to the lane A kitchen speaker. 12 Lane A vehicle detector input [VDET]

This is connected to the vehicle detector installed in lane A. Lane B mic input [OUT MIC]

This is connected to the microphone for the order post installed in lane B. Lane B speaker output

[OUT SP (8 ) Class2 Wiring]

This is connected to the speaker for the order post installed in lane B. Lane B line output [LINE OUT]

The same communication that is output from OUT SP of lane B is output. Lane B kitchen mic input [AUX MIC]

This is connected to the gooseneck microphone installed in the lane B kitchen. It is used to speak with the customer who has arrived at the order post for lane B. Lane B kitchen speaker output

[AUX SP (8 ) Class2 Wiring]

This is connected to the speaker installed in the lane B kitchen. It is used to speak with the customer who has arrived at the order post for lane B. Lane B line input [LINE IN]

External communications can be broadcast simultaneously to all the All-In-One Headsets or Belt Packs and to the lane B kitchen speaker. Lane B vehicle detector input [VDET]

This is connected to the vehicle detector installed in lane B. WX-CC411_PGQX2068ZA_IG.indb 12 2016/05/18 13:30:25 External control output [DEVICE]

This external control output is used for alerts. Using this units settings, this connector is controlled in response to the reception of alert signals from the All-In-

One Headsets or Belt Packs and to the signals from the alert input. Alert input [ALERT]

This external input connector is used for alerts. It is connected to a sensor or other external device. Serial port [RS-232C]

This port is for controlling the system from a personal computer. For details, contact the store where you purchased this unit. Video output [VIDEO OUT]

This NTSC type of composite connector is for outputting camera images. For details, contact the store where you purchased this unit. Network port [10BASE-T/100BASE-TX]

This is connected to a 10BASE-T or 100BASE-TX network, and it connects the Network Camera with the Center Module. pwSide panel Reset button Press this button using a fine-tipped object when this unit is not operating properly to restart this unit. SD card slot This is where an SD card is inserted. SD card access LED This indicates the status of the SD card access. While the SD card is being accessed, it blinks in green. Important pp While the SD card access LED is blinking, do not eject the SD card, disconnect the power plug or press the reset button. Performing any of these actions may destroy the data on the card. 13 WX-CC411_PGQX2068ZA_IG.indb 13 2016/05/18 13:30:26 English Major operating controls and their functions pwScreen The following four buttons, which are separate from the LCD display buttons, are permanently displayed on the touch panel. L M N O L Setting Information button N Camera display button This button is used to display the settings and statuses.

(Refer to p.16 Setting Information screen.) This button is used to display the images of the Panasonic Network Cameras that have been registered. (Refer to p.18 Camera monitoring screen.) M Setting button O Quick Operation button This button is used to display the password input screen. After the password has been confirmed, the setting list screen is displayed. (Refer to p.18 Password input screen.) This button is used to display the Quick Operation screen that is used with drive-thru operations. (Refer to p.19 Quick Operation screen.) 14 WX-CC411_PGQX2068ZA_IG.indb 14 2016/05/18 13:30:29 6 Talk display (lane B) While the store personnel are talking to the customer in lane B, this is displayed in green. 7 Paging display (lane B) While the store personnel at lane B are talking to one another, this is displayed in green. 8 REC button When a communication is being recorded after a security alert has occurred, this is displayed in red. 9 Title display The title of the screen currently displayed appears.

: Date & time display The current date and time are displayed.

* appears in front of the time display during daylight savings time (summer time). pp The date and time on this unit is set with the following order: month / day / year hour:minute pp The time is displayed as a 24-hour clock. Description of screens pwBasic screen The basic screen that appears on the LCD display is described below. 9

1 2 3 4 5 6 7 8 1 Security Alert display When an alert signal has been received from an external device or an All-In-One Headset or Belt Pack, this is displayed in red. 2 Vehicle detection display (lane A) When a vehicle has arrived at the order post for lane A, this is displayed in orange. 3 Talk display (lane A) While the store personnel are talking to the customer in lane A, this is displayed in orange. 4 Paging display (lane A) While the store personnel at lane A are talking to one another, this is displayed in orange. 5 Vehicle detection display (lane B) When a vehicle has arrived at the order post for lane B, this is displayed in green. WX-CC411_PGQX2068ZA_IG.indb 15 2016/05/18 13:30:30 15 English Description of screens pwSetting Information screen The Setting Information screen appears when

(Setting Information button) on the touch panel is touched. This units settings and statuses can be confirmed on this screen. 1 2 3 4 1 Setting Info [Setting Info]

When the Setting Info button is touched, the display on the LCD display switches to the setting list screen. 2 Security Alert [Security Alert]

When the Security Alert button is touched, the display on the LCD display switches to the Security Alert screen.

(P.17) 3 Help Contact [Help Contact]

When the Help Contact button is touched, the display on the LCD display switches to the Help Contact screen.

(P.18) 1 Lane name display [A] ([B]) The lane name is displayed. The lane setting statuses are displayed to the right of the lane name display. When the WX-CC412A is used, lane B is also displayed underneath lane A. 2 Lane mode display [Single/Dual/Tandem]

Lane mode that has been set is displayed. WX-CC411A: [Single] is displayed. WX-CC412A: [Dual] is displayed when the tandem lane setting is OFF, and [Tandem] is displayed when it is ON. 3 Nighttime Volume display

[Nighttime Volume ON/OFF/AUTO]

The setting status of the volume of the order post speaker at night is displayed. Note pp The Nighttime Volume is a function that is used to adjust the volume level of the voice output from the order post speaker. 4 Speed Team display [Speed Team ON/OFF]

The status of the speed team operation is displayed. Note pp Speed Team operation refers to a mode of operation in which, at busy times when there are more vehicles than the lanes can accommodate, normal operation is suspended, the vehicle detectors are shut off, and the store personnel go directly to the customers in their vehicles to take their orders. 4 System Information [System Info]

When the System Info button is touched, the screen on the LCD display switches to the System Info screen. (P.18) 5 Cross Beep display [Cross Beep ON/OFF]

The Cross Beep status is displayed. This appears only when the WX-CC412A is used. Note pp Cross Beep is a function that sends the beep tone announcing the arrival of customers across the two lanes. 6 Lane A order post speaker volume display

[Outside]

The volume level of the lane A order post speaker is displayed. 7 Lane A kitchen speaker volume display [AUX]

The volume level of the lane A kitchen speaker is displayed. Setting list screen The setting list screen is displayed when the units power is turned on or when the [Setting Info] button is touched. 3 6 7 98

:4 5 2 1 16 WX-CC411_PGQX2068ZA_IG.indb 16 2016/05/18 13:30:31 8 Lane A order post microphone volume display

[Outside]

The volume level of the lane A order post microphone is displayed. 9 Lane A kitchen microphone volume display

[AUX]

The volume level of the lane A kitchen microphone is displayed.

: Lane A beep tone volume display [Beep]

The volume level of the lane A beep tone is displayed. Lane A line input volume display [Line In]

The volume level of the lane A line input is displayed. Lane A line output volume display [Line Out]

The volume level of the lane A line output is displayed. Lane A order post microphone ON/OFF display

[Out Mic ON/OFF]

The setting that determines whether to output the voice of the lane A order post microphone to the lane A kitchen speaker is displayed. Lane A kitchen microphone ON/OFF display

[AUX Mic ON/OFF]

The setting that determines whether to output the voice of the lane A kitchen microphone to the lane A kitchen speaker is displayed. Lane A talk ON/OFF display

[TALK ON/OFF]

The setting that determines whether to output the talk voice to the lane A kitchen speaker is displayed. Note pp Talk refers to communications between the customers and store personnel. Lane A beep tone ON/OFF display

[Beep ON/OFF]

The setting that determines whether to output the beep tone to the lane A kitchen speaker is displayed. Lane A paging ON/OFF display

[PAGE ON/OFF]

The lane A paging setting is displayed. Note pp Paging refers to communications among store personnel. Lane A V/Det Override ON/OFF display

[V/Det Override ON/OFF]

The status of the lane A V/Det Override is displayed. Note pp V/Det Override is a function that sets the vehicle detectors virtually to ON and keeps both the order post microphone and speaker in the ON setting. Security Alert screen The Security Alert screen appears when the [Security Alert]

button on the Setting Information screen is touched. 1 2 3 1 Cause and Initiation time The cause of a security alert that has occurred and the initiation time are displayed.

[F Button]

All-In-One Headsets or Belt Packs.

[Alert 1 to 4]

: Sent from the store personnel who have

: Sent from alert input 1 to 4. 2 Clear button [Clear]

This is touched to forcibly clear the Security Alert. 3 Stop button [Stop]

This is touched when the Alert Message for the Security Alert is to be stopped. This appears when Alert message playback has been set for operations to be performed when a Security Alert has occurred. 17 WX-CC411_PGQX2068ZA_IG.indb 17 2016/05/18 13:30:32 English Description of screens Help Contact screen The Help Contact screen appears when the [Help Contact]

button on the LCD display is touched. pwPassword input screen The password must be input for verification before operation moves to the setting screen. The password input screen appears when button) on the touch panel is touched. For details on how to input the characters, refer to p.30 Inputting characters.

(setting The emergency help contact is displayed on this screen. It can be set on the setting screen. If an email has been set using the browser ahead of time, an email can be sent from this screen. Note pp It is not possible to display the email send result even when, for instance, an email failed to be sent because the server was down or the wrong email was set. When installing this unit, check that emails can be correctly sent ahead of time. System Info screen The System Info screen appears when the [System Info]

button on the LCD display is touched. Default password: 12345 Important pp Change the password at regular intervals for security purposes. pwCamera monitoring screen The camera monitoring screen appears on the LCD display when

(camera display button) on the touch panel is touched. 1 2 5 6 7 8 9 3 4 1 Camera 1 screen Images from Network Camera 1 appear on this part of the screen. 2 Camera 2 screen Images from Network Camera 2 appear on this part of the screen. 3 Camera 3 screen Images from Network Camera 3 appear on this part of the screen. Network statuses are shown on this screen. 18 WX-CC411_PGQX2068ZA_IG.indb 18 2016/05/18 13:30:35 4 Camera 4 screen Images from Network Camera 4 appear on this part of the screen. 5 Camera 1 full-screen display button When this button is touched, images from Network Camera 1 are displayed in full-screen mode. 6 Camera 2 full-screen display button When this button is touched, images from Network Camera 2 are displayed in full-screen mode. 7 Camera 3 full-screen display button When this button is touched, images from Network Camera 3 are displayed in full-screen mode. 8 Camera 4 full-screen display button When this button is touched, images from Network Camera 4 are displayed in full-screen mode. 9 4-screen simultaneous display button When this button is touched, the screen is split into four parts, and the images from Network Cameras 1, 2, 3 and 4 are displayed simultaneously. Note pp When a camera image is touched while the screen is split into four parts and images are displayed simultaneously, the touched image is displayed in full-

screen mode. pwQuick Operation screen The Quick Operation screen appears on the LCD display when touched.

(Quick Operation button) on the touch panel is 1 2 3 1 Common button This button is used to display the Quick Operation screen that is common to both lanes. 2 Lane A button This button is used to display the Quick Operation screen for lane A. 3 Lane B button This button is used to display the Quick Operation screen for lane B. Note pp The lane B button is displayed only when the WX-CC412A is used. WX-CC411_PGQX2068ZA_IG.indb 19 2016/05/18 13:30:35 19 English Related devices Devices related to the wireless intercom system are listed below. uCenter Module WX-CC411A/WX-CC412A u Belt Pack WX-CT420 u All-In-One Headset WX-CH450 uHeadset WX-CH427 u Battery WX-B3030 u Battery Charger WX-Z3040A u Wireless Repeater WX-CR470 20 WX-CC411_PGQX2068ZA_IG.indb 20 2016/05/18 13:30:36 Installation procedures pwDeciding on where to install the Center Module Select a wall on which to mount this unit, drill a hole in it to pass the wires through, and decide where the four screws are to be positioned, as shown below. 190 200 5 3 1 5 2 0 4 5 Important pp Ensure that the installation surface has the pull-out strength below. pw Installation 1 Mount this unit using the accessory wall mounting bracket and 4 screws (4.1 mm 25 mm

{5/32 inches 63/64 inches}).

[Minimum pull-out strength: 780 N {80 kgf}]

Screws (locally procured)

(wood screws:

4.1 mm 25 mm

{5/32 inches 63/64 inches}) Wire channel 21 WX-CC411_PGQX2068ZA_IG.indb 21 2016/05/18 13:30:37 English Installation procedures 2 Mount this unit onto the four hooks of the wall mounting bracket. 3 Look at the confirmation window (which is marked CHECK), and confirm that this unit fits properly into place. LANE A LANE B CNT COM CNT 1 DEVICE COM COM CNT 2 CNT ALERT CNT TxD SG RxD RS-232C VIDEO OUT 10BASE-T 100BASE-TX Check that the marks of the wall mounting bracket are visible. If they are not visible, this means that this unit has not been installed properly. 22 WX-CC411_PGQX2068ZA_IG.indb 22 2016/05/18 13:30:37 4 Use the accessory clamp to secure the power cord to the wall and attach the clamp using a screw

(4.1 mm 25 mm {5/32 inches 63/64 inches}).

[Minimum pull-out strength: 780 N {80 kgf}]

Screw (locally procured) 150 mm to 200 mm

{5-15/16 inches to 7-7/8 inches}

WX-CC411_PGQX2068ZA_IG.indb 23 2016/05/18 13:30:37 23 English Connections pwOpening the connector cover Press on the area indicated by 1 and slide the connector cover down, and pull the bottom part of the cover toward you as indicated by 2. pwSecuring the power cord 1 Insert the accessory power cord clamp into this unit. 24 WX-CC411_PGQX2068ZA_IG.indb 24 2016/05/18 13:30:38 2 Before proceeding any further, push down the position of the power cord clamp inserted into this unit, as shown in the figure below. Insert the power cord plug into the power socket of this unit, adjust the position of the power cord clamp, and secure the power cord. pwWiring the Euroblock connector 1 A detachable Euroblock connector is provided for this units connectors. As shown in the figure below, insert a slot-head screwdriver into the gap, and remove the Euroblock connector from this unit. WX-CC411_PGQX2068ZA_IG.indb 25 2016/05/18 13:30:38 25 English Connections 2 Connect the wires to the Euroblock connector. Using a slot-head screwdriver, loosen the Euroblock connector screws in turn, peel off the insulating material around each of the wires, twist the conductors firmly, insert the ends of the conductors into the Euroblock connector, and tighten the Euroblock connector screws. 7 mm 1 mm

{9/32 inches 1/16 inches}

Note Shaping the cables pp Recommended wires: AWG28 to 16 (Do not use soldered wires.) pp Length of insulating material to be peeled off: 7 mm 1 mm {9/32 inches 1/16 inches}

pp Screw diameter: 2 mm {3/32 inches}

pp Check that the wires have been connected securely. Electrical specifications of connectors pp DEVICE CNT and DEVICE COM connectors Connect an external device between the CNT and COM connectors. These connectors are isolated from the internal circuitry using a photo-coupler. Internal circuitry (polar) Max. 50 mA CNT Electrical specifications:

30 V control voltage, 50 mA control current External device pp ALERT CNT and ALERT COM connectors Connect an external device between the CNT and COM connectors. These connectors operate by a make action. The COM connector is connected to the GND inside this unit. Photo-coupler COM Electrical specifications:

DC 5 V open voltage, 2 mA short current 26 Internal circuitry 2 mA short current CNT Photo-coupler External device COM WX-CC411_PGQX2068ZA_IG.indb 26 2016/05/18 13:30:39 3 Install the Euroblock connector, to which the wires have been connected, in this unit. Note pp Insert the Euroblock connector firmly into this unit. pwAttaching the connector cover Slide the connector cover from below, and attach it to this unit. Note pp Attach the connector cover securely to this unit. WX-CC411_PGQX2068ZA_IG.indb 27 2016/05/18 13:30:39 27 English Connections pwExamples of connections Lane A CNT COM CNT 1 DEVICE COM COM CNT 2 CNT ALERT CNT TxD SG RxD RS-232C VIDEO OUT 10BASE-T 100BASE-TX External device Expanded vehicle detector Sensors Refrigerator Cash register, etc. Vehicle detector Kitchen monitor HUB Kitchen microphone Kitchen speaker

(8 ) Lane B (WX-CC412A only) PC Network Cameras Kitchen microphone Kitchen speaker

(8 ) Expanded vehicle detector Vehicle detector PC Order post Microphone Speaker

(8 ) Order post Microphone Speaker

(8 ) Drive-thru lane A Drive-thru lane B 28 WX-CC411_PGQX2068ZA_IG.indb 28 2016/05/18 13:30:39 Screen operations pwBasic screen operations This section describes basic screen operations. For details on how to operate the unit and select its settings, refer to the Operating Instructions <Setup Instructions>

(PDF file). 1 2 3 1 Return button This button is used to return to the previous screen. 2 Item selector buttons Operation moves to the screen corresponding to the button that has been touched. On the setting screen, one of the buttons is selected (indicated in orange). The buttons have different names, depending on the situation. 3 Page selector buttons These buttons are used to select the page when the screen extends over a multiple number of pages. When the button is touched, the next page screen is displayed, and when the button is touched, the previous page screen is displayed. Note pp The LCD display is easily scratched, so always perform the operations involving this display using one finger. pp Do not use a ballpoint pen or other hard-tipped or sharp object, including fingernails, to perform touch panel operations. pp Do not press on the LCD display with too much force. pp Do not use any of the LCD protective films available on the market. (The touch panel may not operate properly.) pp The inside of the LCD display may become cloudy or condensation (droplets of water) may form and the display may not operate properly when the temperature changes suddenly, such as immediately after air-conditioning or heating has been turned on. If this occurs, leave this unit for about one to two hours before attempting to use it again. pwEntering the settings On a screen with multiple setting items, touch the [Set]

button to confirm a setting. 1 1 Set button This button confirms all multiple settings displayed on the screen together. WX-CC411_PGQX2068ZA_IG.indb 29 2016/05/18 13:30:41 29 English Screen operations pwInputting characters Use the keys on the keyboard to input the characters when a password or an address is to be input. pwInputting the date and time Input the date and time by using the [+] and [-] buttons. 1 6 2 3 4 5 1 Input character display area The characters that have been input are displayed. 2 Backspace button Touch this button to delete the last character of the characters shown in the input character display area. 3 Character input buttons The character on the button that is touched is input. 4 Space button Touch this button to input a space. 5 Set/Enter button [Enter/Login]

Touch this button to enter the character string that has been input. 6 Character type selector button Touch this button to change the type of characters that are to be input. 1 2 3 1 Setting value display area The current setting values are displayed. 2 + and buttons Adjust the settings by touching the + and buttons. 3 Set/Enter button [Set/Enter]

Touch this button to enter the date and time that has been set. pwAdjusting the volume level Adjust the volume level. 2 1 2 1 Volume level display area The current volume levels are displayed. 2 + and buttons Adjust the levels by touching the + and buttons. Changes in the volume level take place in real time. 30 WX-CC411_PGQX2068ZA_IG.indb 30 2016/05/18 13:30:43 Operating procedures pwBasic operations TALK: Talking with the customers This function enables two-way conversations between the store personnel who are wearing All-In-One Headsets or Belt Packs and the customer at the order post. For further details on conversation methods, refer to the Operating Instructions for the Belt Pack (WX-CT420) or All-

In-One Headset (WX-CH450). PAGE: Talking with other store personnel Store personnel who are wearing All-In-One Headsets or Belt Packs can talk to one another without being heard by customers. For further details on paging methods, refer to the Operating Instructions for the Belt Pack (WX-CT420) or All-In-One Headset (WX-CH450). Dual drive-thru lane changeover

(WX-CC412A only) In the case of a dual drive-thru, it is possible to talk or page by selecting lane A or lane B. For details on how to perform lane changeover operation, refer to the Operating Instructions for the Belt Pack (WX-

CT420) or All-In-One Headset (WX-CH450). pwID Registration pp To talk or page using an All-In-One Headset or Belt Pack, its ID must be registered. pp For ID registration, set the Center Module to ID registration mode, and proceed with the registration by operating the All-In-One Headset or Belt Pack concerned. The ID registration procedure is described below based on an example involving an All-In-One Headset or Belt Pack operation. 1 Touch panel. pp The password input screen appears.

(setting button) on the touch 2 Input the password, and touch the [Login]

button. Default password: 12345 Important pp Change the password at regular intervals for security purposes. pp The setting menu is displayed. WX-CC411_PGQX2068ZA_IG.indb 31 2016/05/18 13:30:44 31 English Operating procedures 3 Touch [Headsets] button, and then the [ID Registration] button. pp The ID registration screen appears. Note pp The registered All-In-One Headset or Belt Pack numbers are displayed in the [Registered Headsets] area. When ID registration is completed successfully, the ID of the newly registered All-In-One Headset or Belt Pack is added. 4 Touch the [Start] button. pp The following pop-up screen is displayed. You cannot perform other operations during ID registration. To continue ID registration, touch the [YES] button. To stop ID registration, touch the [NO] button. pp Touch the [YES] button to start ID registration mode. The number of the All-In-One Headset or Belt Pack that has been registered is displayed. 5 Press the [POWER] button while holding down the [T1] button and [T2] button of the All-In-

One Headset or Belt Pack. pp The All-In-One Headset or Belt Pack starts up in ID registration mode. The Registration Mode voice prompt will be heard from the earphone, and the power indicator will blink orange. In ID registration mode, the buttons and indicators have different functions from those at normal startup. 32 6 Press the [T1] button on the All-In-One Headset or Belt Pack. pp The All-In-One Headset or Belt Pack searches for a Center Module that is in ID registration mode. The Connecting center module A voice prompt will be heard from the earphone, and the lane indicator will blink orange. In the case of the WX-CC412A, after lane A registration, the Connecting center module B voice prompt will be heard, and the lane indicator will blink green. pp When ID registration has been completed successfully, the Registration complete voice prompt will be heard from the earphone, and then a voice prompt for the number of the registered All-In-

One Headset or Belt Pack will be heard. The power indicator and the lane indicator now stop blinking, and light up. After registrating all of the headset IDs, touch the [Stop]

button on the ID registration screen. ID registration mode for the Center Module is exited. The power indicator of the All-In-One Headset or Belt Pack changes from orange to green. Important pp When registering the IDs of a multiple number of All-In-One Headsets or Belt Packs, register the ID of each unit in sequence. If an attempt is made to register the IDs of multiple units at the same time, the IDs may not be registered correctly. pp During the ID registration process, do not turn off the power of the All-In-One Headsets or Belt Packs or remove their batteries. Otherwise, their IDs may not be registered correctly. If the registration is not proceeding smoothly, touch the [Stop] button on the Center Module, exit ID registration mode, and then try again. pp When ID registration fails, a BUU-UU-UU warning sounds in the All-In-One Headset or Belt Pack concerned, and then the Failed voice prompt is heard. If an ID registration has failed, the ID of the All-In-One Headset or Belt Pack will not be registered in the Center Module, and the power indicator of the All-In-One Headset or Belt Pack concerned will blink in red. pp The IDs of up to 32 All-In-One Headsets or Belt Packs can be registered in one Center Module. If an attempt is made to register IDs for more than 32 units, the IDs of the headsets not used for the longest time will be automatically deleted, and then the IDs of the new units will be registered. pp It is not possible to register the ID of a wireless repeater while ID registration mode of the All-In-One Headsets or Belt Packs is active. WX-CC411_PGQX2068ZA_IG.indb 32 2016/05/18 13:30:46 pwConvenient Functions

(Other Functions) Auto-TALK-Lock This function enables the All-In-One Headset or Belt Pack of pre-determined store personnel to automatically enter talk mode when a customer approaches the order post. (Talk-

Lock mode) For details on how to set Auto-Talk-Lock mode, refer to the Operating Instructions for the Belt Pack (WX-CT420) or All-

In-One Headset (WX-CH450). Manager mode One of all the All-In-One Headsets or Belt Packs in a lane can be set to manager mode. The All-In-One Headset or Belt Pack in manager mode has a higher priority than the other All-In-One Headsets or Belt Packs, and can monopolize one of the four communication channels. This means that the manager can talk or page at any time. For details on how to set manager mode, refer to the Operating Instructions for the Belt Pack (WX-CT420) or All-

In-One Headset (WX-CH450). Speed Team Speed Team operation refers to a mode of operation in which, at busy times when there are more vehicles than the lanes can accommodate, normal operation is suspended, the vehicle detectors are shut off, and the store personnel go directly to the customers in their vehicles to take their orders. 1 Touch

(Quick Operation button) on the touch panel, and then the [Common] button. 2 Touch the [ON] button for [Speed Team] to enable Speed Team operation. pp In the All-In-One Headsets or Belt Packs, the SPEED TEAM ON voice prompt is heard from the earphones. Note pp In Speed Team mode, the SPEED TEAM ON voice prompt will be heard every 5 minutes from the earphone of the All-In-One Headsets or Belt Packs. 3 When the [P] button of the All-In-One Headset or Belt Pack is pressed, conversation becomes possible in page lock mode. pp Even if the [P] button is set to Press-to-Page, the button will still operate in page lock. pp For further details on paging methods, refer to the Operating Instructions for the Belt Pack (WX-CT420) or All-In-One Headset (WX-CH450). 33 WX-CC411_PGQX2068ZA_IG.indb 33 2016/05/18 13:30:46 English Operating procedures 4 To release Speed Team operation, touch the

[OFF] button for [Speed Team] on the screen in step 2. pp In the All-In-One Headsets or Belt Packs, the SPEED TEAM OFF voice prompt is heard from the earphones, and normal operation is restored. Note pp In Speed Team mode, it is not possible to talk with customers at the order posts. pp When talking is attempted from an All-In-One Headset or Belt Pack, the Operation not allowed voice prompt is heard from the earphone. Cross Beep (WX-CC412A only) Cross Beep is a function that enables a beep tone to be heard from the All-In-One Headsets or Belt Packs when a customer approaches the order post of the other lane. 1 Touch

(Quick Operation button) on the touch panel, and then touch the [Common]

button. 2 Touch the [ON] button for [Cross Beep] to enable Cross Beep operation. pp To release Cross Beep, touch the [OFF] button. OFF:

If lane A has been selected, beep tone A will be heard when a vehicle in lane A is detected. However, beep tone B will not be heard even when a vehicle in lane B has been detected. ON:

If lane A has been selected, beep tone A will be heard when a vehicle in lane A is detected. Furthermore, beep tone B is heard at a low volume level even when a vehicle in lane B has been detected. When vehicles have been detected in both lanes, beep tone A and beep tone B, which are heard at a low volume level, will be heard alternately. Vehicle detector All-In-One Headset or Belt Pack Cross Beep OFF ON Lane A is ON Lane B is ON Beep A A B Beep B Beep B Low level Beep A Beep A Beep A Low level Beep B Beep B Beep A +

Low level Beep B Beep B +

Low level Beep A 34 WX-CC411_PGQX2068ZA_IG.indb 34 2016/05/18 13:30:47 V/Det Override V/Det Override is a function that sets the vehicle detectors virtually to ON and keeps both the order post microphone and speaker in the ON setting. Talk/page release The talk (or page) status of an All-In-One Headset or Belt Pack is forcibly released. 1 Touch

(Quick Operation button) on the touch panel, and then touch the [Lane A/B]

button*.

* [Lane B] button appears only when the WX-CC412A is used. 2 Touch the [Execute] button for [T/P Release]. pp Communication is forcibly terminated. Note pp The talk (or page) status of the All-In-One Headset or Belt Pack in manager mode is not released. 1 Touch

(Quick Operation button) on the touch panel, and then touch the [Lane A/B]

button*.

* [Lane B] button appears only when the WX-CC412A is used. 2 Touch the [ON] button for [V/Det Override] to enable this function. pp To release V/Det Override, touch the [OFF] button. OFF:

When the vehicle detector detects a vehicle at the order post, a beep tone is heard from the earphone. When the Talk button on an All-In-One Headset or Belt Pack is pressed, the order posts speaker and microphone are turned on. When the vehicle drives off, vehicle detection is turned off. The OFF setting and Auto-Talk-Lock mode can now be established. ON:

When [V/Det Override] is set to ON, the order posts microphone is turned on permanently and talking is enabled even when the vehicle detector is not ON. (Sound from the order posts microphone can be forcibly heard.) Note pp When Speed Team is enabled, the setting for V/Det Override is automatically turned OFF. pp In Speed Team mode, you cannot change the setting for V/Det Override. WX-CC411_PGQX2068ZA_IG.indb 35 2016/05/18 13:30:48 35 English Troubleshooting Check the following before requesting repair. Consult your sales shop if these measures do not resolve a problem, if symptoms not listed here occur, or if you have a question related to engineering. Symptom Cause/solution Reference pages No communication between the order post, Belt Packs and All-In-One Headsets is possible. Paging between the store personnel is possible, but talking with the customers using the order post is not possible. An echo is heard from the earphone of the headset when an individual is talking into the headset microphone. pp Is the power cord connected securely to the AC input terminal of this unit and to the power outlet?

Check whether it is connected. pp Have the microphone input and speaker output of the order post been connected properly?

Check whether it is connected properly. pp The speaker and microphone for the order post may not have been installed correctly. Check that the speaker and microphone are placed at a sufficient distance from each other, and anchor them securely so that any vibrations are absorbed. pp The input and output audio levels may have been set too high. Lower the audio input and output levels (OUT MIC/OUT SP) for the order post to the appropriate level. (Feedback noise can be prevented by selecting a setting that lowers the audio input level.) pp The echo canceller is off or its level is low. Set the echo canceller to the appropriate level.

(The default setting is MID.) A lot of noise is heard from order post. pp DNR is OFF or its level may be low. Set the DNR to the appropriate level.

(The default setting is MID.) There is no reaction even when the buttons on the touch panel are touched. When one of the buttons on the touch panel has been touched, another button reacts instead. Communication breaks up or it is hardly possible to hear what is being said. No communication with the cameras is possible. Nothing happens even when operations are performed correctly; or the operations are performing incorrectly. 36 pp Is the touch panel dirty?

Clean the touch panel. If there is no improvement even after it has been cleaned, adjust the touch panel. pp The touch panel must be adjusted. Adjust the touch panel. pp Are the All-In-One Headsets or Belt Packs too far away from the Center Module, or are there any obstructions such as concrete walls or metal devices between the Center Module and the All-In-One Headsets or Belt Packs?

Contact the store where you purchased this unit, and move this unit to a location where there are no obstructions around it. pp Have the cameras been registered in the Center Module?

No communication with the cameras is possible if the cameras have not been registered. Register the cameras that are to be connected. Operating Instructions

pp This unit may not be working properly. Press the reset button on the side panel of this unit using a fine-

tipped object. (The settings, etc. will not be cleared.) P.13 P.24 P.25 WX-CS560 Operating Instructions Operating Instructions

Operating Instructions

Operating Instructions

P.10 Operating Instructions

WX-CC411_PGQX2068ZA_IG.indb 36 2016/05/18 13:30:48 Specifications General Operating frequency POWER Power source Connector Power consumption Operating temperature range Operating humidity range 1921.536 MHz to 1928.448 MHz AC 100 V to 120 V 50 Hz/60 Hz Universal Type with an 3 pins AC Inlet 17 W 10 C to +50 C {14 F to 122 F}

20 % to 90 % (no condensation) 375 mm (W) 275 mm (H) 50 mm (D)

{14-49/64 inches (W) 10-53/64 inches (H) 1-31/32 inches (D)}

Approx 1.9 kg {4.2 lbs.} (Excluding the wall mounting bracket) Dimensions Mass User Interface LCD display Touch panel Audio & Video Interface General OUT MIC OUT SP AUX MIC AUX SP Type Effective pixels Back light Type Technology 7 Type WVGA: 800 (H) 480 (V) LED 7.8 Type Resistive type Number of channels Frequency characteristic Technology Connector Input impedance Rated input Maximum input Technology Connector Rated output for amplifier Conformed load impedance Technology Connector Input impedance Rated input Maximum input Control signal Technology Connector Rated output for amplifier Conformed load impedance 1 (WX-CC411A) 2 (WX-CC412A) 300 Hz to 3 kHz Electric balanced Euroblock connector (HOT/COLD/GND) 1.5 k 70 dBV 38 dBV Balanced Euroblock connector 2 W 8 Electric balanced Euroblock connector (HOT/COLD/GND/PTT/COM) 3 k 67 dBV 44 dBV PTT, Make (No voltage) when talking Balanced Euroblock connector 2 W 8 WX-CC411_PGQX2068ZA_IG.indb 37 2016/05/18 13:30:48 37 English Technology Connector Rated input Maximum input Technology Connector Rated output Maximum output Unbalanced, Mono Euroblock connector 10 dBV

+6 dBV Unbalanced, Mono Euroblock connector 14 dBV

+6 dBV Specifications LINE IN LINE OUT Device Interface AUX MIC CNT, COM

(INPUT) VDET CNT, COM

(INPUT) ALERT CNT, COM

(INPUT) DEVICE CNT, COM

(OUTPUT) RS-232C TxD, RxD, SG Number of channels Technology Open voltage Short current Connector Number of channels Technology Open voltage Short current Connector Number of channels Technology Open voltage Short current Connector Number of channels Technology Control voltage Control current Connector Communication system Baud rate SD card Corresponding card 10BASE-T, 100BASE-TX

(Network) Supported protocols VIDEO OUT Type Connector Type Output signals Connector 38 1 (WX-CC411A) 2 (WX-CC412A) Photo-coupler 5 V 2 mA Euroblock connector 2 (WX-CC411A) 4 (WX-CC412A) Photo-coupler 5 V 2 mA Euroblock connector 4 Photo-coupler 5 V 2 mA Euroblock connector 1 Photo-coupler DC 30 V MAX 50 mA Euroblock connector Asynchronous (full duplex) 19200 bps SD card, SDHC card Note: miniSD card and MicroSD card are not applicable. 10/100BASE-TX (Full/Half, Auto/Man) RJ-45 IPv4: TCP/IP, HTTP, HTTPS, DHCP, DNS, SMTP, NTP, UPnP, POP NTSC Composite RCA pin jack WX-CC411_PGQX2068ZA_IG.indb 38 2016/05/18 13:30:48 Licenses This unit contains thttpd, NetBSD, OpenSSL Project, Arcfour and MD5 message-digest algorithm software licensed by third parties, and use of this software has been granted under the conditions stated below. LICENSE ISSUES This product uses some parts of thttpd, NetBSD, OpenSSL Project, Arcfour, MD5 message-digest algorithm. The use of parts described above are licensed under the conditions below. thttpd Copyright 1995,1998,1999, 2000 by Jef Poskanzer <jef@acme.com>. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. E n g l i s h NetBSD

<isys_fcntl.h>

(c) UNIX System Laboratories, Inc. All or some portions of this file are derived from material licensed to the University of California by American Telephone and Telegraph Co. or Unix System Laboratories, Inc. and are reproduced herein with the permission of UNIX System Laboratories, Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

@(#)fcntl.h 8.3 (Berkeley) 1/21/94 39 WX-CC411_PGQX2068ZA_IG.indb 39 2016/05/18 13:30:48 English Licenses

< isys_pl_stdio.c >

Copyright (c) 1990 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Chris Torek. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

<isys_getopt.c>

Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

<isys_pl_crypt .c >

Copyright (c) 1989 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Tom Truscott. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. 40 WX-CC411_PGQX2068ZA_IG.indb 40 2016/05/18 13:30:48 THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

<isys_vsscanf.c>

Copyright (c) 1990, 1993 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Chris Torek. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

<nce_util_strtol.c>

Copyright (c) 1990, 1993 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Parts of the NetBSD Kernel are provided with the licenses that are slightly different from the above Berkeley-formed license. Please refer the source code of the NetBSD Kernel about the details. The source code of the NetBSD Kernel is provided by the NetBSD CVS Repositories (http://cvsweb.netbsd.org/bsdweb.cgi/), and this product includes parts of the source code in the following directories. http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/kern/

http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/net/

http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/netinet/

41 WX-CC411_PGQX2068ZA_IG.indb 41 2016/05/18 13:30:48 English Licenses OpenSSL This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/).

< md32_common.h>

Copyright (c) 1999-2002 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.OpenSSL. org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact licensing@OpenSSL.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.OpenSSL. org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ''AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).

<md5_locl.h>

Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson

(tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"

The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:

"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"

42 WX-CC411_PGQX2068ZA_IG.indb 42 2016/05/18 13:30:48 THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

<md5.h>

"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"

"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

<md5_dgst.c>

cryptsoft.com). 43 WX-CC411_PGQX2068ZA_IG.indb 43 2016/05/18 13:30:48 English Licenses Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"

"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"

<e_os2.h>

Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment:

"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). 44 WX-CC411_PGQX2068ZA_IG.indb 44 2016/05/18 13:30:48 Arcfour Copyright (c) April 29, 1997 Kalle Kaukonen. All Rights Reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that this copyright notice and disclaimer are retained. THIS SOFTWARE IS PROVIDED BY KALLE KAUKONEN AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL KALLE KAUKONEN OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. MD5 Message-Digest Algorithm MD5C.C - RSA Data Security, Inc., MD5 message-digest algorithm Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991. All rights reserved. License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc. MD5 Message-

Digest Algorithm" in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the derived work. RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind. These notices must be retained in any copies of any part of this documentation and/or software. WX-CC411_PGQX2068ZA_IG.indb 45 2016/05/18 13:30:48 45 English VERSION FRANAISE

(FRENCH VERSION) Consignes de scurit DCLARATION DE LA COMMISSION FDRALE DES TLCOMMUNICATIONS (FCC) SUR LES INTERFRENCES Cet quipement a t test et dclar conforme aux spcifications de la Classe A des appareils numriques, suivant le chapitre Part 15 des Rgles FCC. Ces limites sont prvues pour assurer une protection suffisante contre les interfrences nuisibles dans une installation commerciale. Cet quipement gnre, utilise et peut mettre de lnergie radiofrquence, et, sil est install sans tenir compte des recommandations du mode demploi, peut causer des interfrences nuisibles dans les communications radio. Lutilisation de cet quipement dans une zone rsidentielle risque fort de provoquer des interfrences nuisibles, auquel cas il sera demand lutilisateur de remdier ces interfrences ses frais. Cet metteur ne doit pas tre install ou utilis en conjonction avec dautres antennes ou dautres metteurs. Les changements ou modifications non expressment approuvs par la partie responsable de la conformit peuvent entraner lannulation du droit dutiliser lquipement. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles les radiolectriques (RF) de la FCC lignes directrices dexposition dans le Supplment C OET65 et dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps ( lexception des extrmits : mains, poignets, pieds et chevilles). Le prsent appareil est conforme aux la partie 15 des rgles de la FCC et CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. ATTENTION RISQUE DE CHOC LECTRIQUE NE PAS OUVRIR ATTENTION: AFIN DE PRVENIR LE RISQUE DE CHOCS LECTRIQUES, NE PAS RETIRER LES VIS. TOUTE RPARATION DEVRAIT TRE CONFIE UN PERSONNEL QUALIFI. Lclair extrmit flche plac dans un triangle quilatral est destin attirer lattention de lutilisateur sur la prsence dune tension potentiellement dangereuse et non isole se trouvant dans les limites du coffret de lappareil dont la puissance est suffisante pour constituer un risque important dlectrocution. Le point dexclamation plac dans un triangle quilatral sert attirer lattention de lutilisateur sur des instructions de fonctionnement et dentretien (de dpannage) caractre important dans la brochure qui accompagne lappareil. AVERTISSEMENT:

pp Cet appareil doit tre mis la terre. pp Lappareil doit tre branch sur une prise de courant principale dote dune connexion de mise la terre de protection. pp La fiche connecte au courant principal ou le coupleur de lappareil doit rester porte de la main. pp Afin de rduire le risqu dincendie ou de choc lectrique, ne pas exposer cet appareil la pluie ou lhumidit. pp Lappareil ne devrait pas tre expos des claboussures ou des projections deau et aucun rcipient rempli de liquide tels que des vases ne devraient tre pos sur lappareil. pp Tout travail li linstallation de ce produit doit tre effectu par le personnel de service ou des installateurs de systme qualifis. pp Pour viter les blessures, cet appareil doit tre solidement fix au sol/mur conformment aux instructions dinstallation. pp Les connexions doivent tre conformes au code lectrique local. pp Le risque de dficience auditive due lexposition des niveaux de bruit excessifs peut tre rduit par lcoute volume plus bas et sur des priodes plus courtes. pp Lutilisation prs dappareils lectriques 1,9 GHz peut causer de linterfrence. loigner des appareils lectriques. pp Cet metteur ne doit pas tre install ou utilis en conjonction avec dautres antennes ou dautres metteurs. pp MDICAL:

Sinformer auprs du fabricant des appareils mdicaux personnels tels que les stimulateurs cardiaques pour savoir sils sont adquatement isols contre lnergie des frquences radio externes. (Cet appareil fonctionne sur la gamme de frquences 1,92 GHz 1,93 GHz, et son niveau de puissance de sortie est de 115 mW (max.).) Ne pas utiliser lappareil dans les tablissements de soins l o des rglements affichs linterdissent. Les hpitaux et autres tablissements de soins peuvent utiliser des quipements sensibles lnergie des frquences radio externes. pp Linstallation doit tre effectue conformment toutes les rgles dinstallation en vigueur. pp Pour viter le risqu dincendie ou de choc lectrique, ne pas exposer cet appareil la pluie ou lhumidit. 46 WX-CC411_PGQX2068ZA_IG.indb 46 2016/05/18 13:30:49 Consignes de scurit ATTENTION:

pp Risque dexplosion si la batterie nest pas correctement remplace. Ne remplacer quavec une batterie de type identique ou quivalent. pp Les prsentes instructions de service ne doivent tre utilises que par le personnel de service qualifi. Pour rduire les risques de dcharge lectrique, neffectuer aucune tche dentretien autre que celles indiques dans ce manuel dinstructions, moins dtre dment qualifi. pp Tout changement ou modification non express-ment approuve par la partie responsable de la conformit pourraient annuler lautorit de lutilisateur utiliser cet quipement. pp Des cbles LAN blinds ( paire torsade blinde) doivent tre utiliss avec cet appareil pour assurer la conformit aux normes CEM. Descriptions des symboles graphiques Ce symbole indique un courant alternatif (C.A.). ICES-003 CAN ICES-3(A)/NMB-3(A) Pour Canada CNR-Gen pp Conformment la rglementation dIndustrie Canada, Pour Canada le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. Lappareil que vous vous tes procur est aliment par une batterie au lithium-ion. Pour des renseignements sur le recyclage de la batterie, veuillez composer le 1-800-8-BATTERY. Instructions de scurit importantes 1) Veiller lire ces instructions. 2) Conserver ces instructions. 3) Tenir compte de tous les avertissements. 4) Se conformer toutes les instructions. 5) Ne pas utiliser cet appareil prs de lieux en prsence deau. 6) Nettoyer uniquement avec un chiffon sec. 7) Ne pas utiliser proximit de sources de chaleur telles que des radiateurs, des bouches de chauffage, des appareils de chauffage ou tout autre appareil (y compris les amplificateurs) produisant de la chaleur. 8) Ne pas asservir lobjectif de scurit de la prise polarise ou de la prise de mise la terre. Une prise polarise possde deux lames dont lune est plus large que lautre. Une prise de mise la terre possde deux lames ainsi quun troisime lment, un ergot de mise la terre. La lame qui est large ou le troisime lment, lergot, sont installs pour assurer votre scurit. Si la prise fournie ne sengage pas correctement dans votre prise, consulter un lectricien pour quil effectue le remplacement de lancienne prise de sortie secteur. 9) Protger le cordon dalimentation afin que personne ne puisse marcher dessus ni ne soit pinc, notamment prs des prises, les prises pratiques et les points de sortie de lappareil. 10) Utiliser uniquement les fixations ou les accessoires spcifis par le fabricant. 11) Utiliser uniquement le chariot, le support, le trpied, la platine de fixation ou la tablette spcifie par le fabricant ou vendu avec lappareil. Quand un chariot est utilis, prendre toutes les prcautions ncessaires lors du dplacement de la combinaison chariot-appareil afin que le tout ne se renverse pas. 12) Dbrancher cet appareil pendant les orages lectriques ou sil nest pas utilis sur de longues priodes de temps. 13) Toute rparation ou dpannage doit tre confi un personnel qualifi. Un dpannage est ncessaire lorsque lappareil a t endommag dune manire quelconque, par exemple, lorsque le cordon dalimentation lectrique ou la prise ont t endommags, quand du liquide sest rpandu dessus ou si des objets sont tombs dans lappareil, lorsque lappareil a t expos la pluie ou lhumidit, ne fonctionne pas normalement ou sil a fait une chute. 47 WX-CC411_PGQX2068ZA_IG.indb 47 2016/05/18 13:30:49 Franais Commandes sur cran ................................................... 73 Commandes de base sur cran ................................... 73 Saisie des paramtres ................................................. 73 Saisie des caractres ................................................... 74 Saisie de la date et de lheure ...................................... 74 Ajustement du niveau du volume ................................. 74 Procdures dutilisation ................................................. 75 Oprations de base ...................................................... 75 Enregistrement ID ........................................................ 75 Fonctions pratiques (Autres fonctions) ......................... 78 Dpannage ...................................................................... 81 Caractristiques techniques ......................................... 82 Sommaire Consignes de scurit ................................................... 46 Avant utilisation .............................................................. 49 Prface ......................................................................... 49 Caractristiques dominantes ....................................... 49 Schma du systme .................................................... 49 Utilisation ..................................................................... 50 propos du manuel dutilisation .................................. 51 Accessoires standard ................................................... 51 Les marques commerciales sont des marques commerciales dposes .............................................. 51 Abrviations ................................................................. 52 Limitation de responsabilit ......................................... 52 Dni de la garantie ....................................................... 52 Scurit rseau ............................................................ 52 Mesures de prcaution .................................................. 53 Prcautions dutilisation ............................................... 53 Prcautions dinstallation ............................................. 54 Principaux organes de commande et fonctions .......... 55 Panneau avant ............................................................. 55 Bornier ......................................................................... 56 Panneau latral ............................................................ 57 cran ............................................................................ 58 Description des crans .................................................. 59 cran de base .............................................................. 59 cran Informations sur paramtrages .......................... 60 cran de saisie du mot de passe ................................. 62 cran de contrle des camras ................................... 62 cran Opration express ............................................. 63 Dispositifs associs ....................................................... 64 Procdures dinstallation ............................................... 65 Choix de lemplacement dinstallation du module central ........................................................ 65 Installation .................................................................... 65 Connexions ..................................................................... 68 Ouverture du couvercle de connecteurs ...................... 68 Fixation du cordon dalimentation ................................ 68 Cblage du connecteur Euroblock ............................... 69 Fixation du couvercle de connecteurs .......................... 71 Exemples de connexion ............................................... 72 48 WX-CC411_PGQX2068ZA_IG.indb 48 2016/05/18 13:30:49 Avant utilisation pwPrface Le WX-CC411A et le WX-CC412A sont des modules centraux pour les systmes dinterphone sans fil utiliss dans les installations de service au volant. pwCaractristiques dominantes pp Le WX-CC411A est conu pour lutilisation en alle simple dans les installations de service au volant, et le WX-CC412A pour lutilisation en alle double. pp La stabilit de la communication est assure par lutilisation dun systme conforme la norme DECT* pour bande de frquence 1,9 GHz, qui permet la transmission claire et distincte de la voix des membres du personnel et des clients, mme en espaces ouverts, avec une interfrence minimale.

* Tlcommunications sans fil amliores par numrique pp Une trs grande clart vocale est assure par un puissant liminateur dcho et par la fonction de rduction numrique du bruit. pp Afin de faciliter linstallation, le botier est conu pour permettre galement un montage mural. pp Le nombre total de casques dcoute tout-en-un et de modules de commande pour ceinture quil est possible denregistrer est de 32. Sur chaque alle, jusqu quatre oprateurs peuvent communiquer en mme temps laide des casques dcoute tout-en-un et des modules de commande pour ceinture. pp Cet appareil trs convivial est dot dun affichage ACL de type 7 cran tactile. pp Cet appareil peut tre connect un rseau IP utilisant Ethernet, pour permettre lexcution de commandes distance. pp En utilisant une carte SD, il est possible de sauvegarder et restaurer les paramtres, et de sauvegarder les messages changs dans linstallation de service au volant. pp Le systme comprend un ordonnanceur qui permet de changer le message daccueil aux heures spcifies et de faire jouer automatiquement des messages de rappel. pp Il est possible denregistrer jusqu quatre camras en rseau Panasonic, et den contrler limage sur laffichage ACL de cet appareil. pp Les signaux dalerte reus peuvent tre envoys vers les casques dcoute tout-en-un ou les modules de commande pour ceinture, les signaux peuvent tre mis vers des priphriques externes, et les courriels dalerte peuvent tre envoys vers des destinations externes. pwSchma du systme En tablissant une connexion sans fil entre le module central et les casques dcoute tout-en-un ou les modules de commande pour ceinture, la communication devient possible entre les casques dcoute tout-en-un ou les modules de commande pour ceinture, ou entre les casques dcoute tout-en-un ou les modules de commande pour ceinture et les clients la borne de commande. Casque dcoute tout-en-un WX-CH450 Module central WX-CC411A/WX-CC412A INTERCOM.

(Communication avec dautres membres du personnel du magasin) Module de commande pour ceinture WX-CT420 Module de commande pour ceinture WX-CT420 Borne de commande Microphone Haut-parleur VOIX

(Communications avec les clients) Dtecteur de vhicule Casque dcoute tout-en-un WX-CH450 49 WX-CC411_PGQX2068ZA_IG.indb 49 2016/05/18 13:30:49 Franais Avant utilisation pwUtilisation Ce systme prend en charge les oprations suivantes pour les clients du service au volant. Alle simple Les oprations effectues dans un environnement o une seule borne de commande est installe sont appeles oprations d alle simple. Ces oprations dalle sont prises en charge par le WX-CC411A. Bonjour BORNE DE COMMANDE FENTRE I E C V R E S E D E L L A T N A L O V U A Alle double Les oprations effectues dans un environnement o dautres bornes de commande sont installes paralllement sont appeles oprations d alle double. Avec les oprations dalle double, les dtecteurs de vhicule de lalle A et de lalle B fonctionnent indpendamment lun de lautre, et lorsque chacun de ces dtecteurs de vhicule est rgl sur OUI, le message daccueil de lalle concerne est jou. Ces oprations dalle sont prises en charge par le WX-CC412A. Bonjour ALLE B BORNE DE COMMANDE Bonjour ALLE A BORNE DE COMMANDE FENTRE ALLE A FENTRE ALLE B 50 I E C V R E S E D E L L A T N A L O V U A WX-CC411_PGQX2068ZA_IG.indb 50 2016/05/18 13:30:49 Alle tandem Les oprations effectues dans un environnement o les bornes de commande sont installes en srie sont appeles oprations d alle tandem. Lorsque le dtecteur de vhicule de lalle A est sur NON et celui de lalle B sur OUI, un message dalle tandem invitant le client aller sur lalle A est jou. Ces oprations dalle sont prises en charge par le WX-CC412A. Faire avancer ALLE A BORNE DE COMMANDE ALLE B BORNE DE COMMANDE FENTRE ALLE A FENTRE ALLE B I E C V R E S E D E L L A T N A L O V U A pw propos du manuel dutilisation Les manuels dutilisation comprennent le Manuel dutilisation <Guide dinstallation>, le Manuel dutilisation <Instructions de configuration> (fichier PDF) et le Manuel dutilisation <Guide dutilisation du navigateur> (fichier PDF). pp Manuel dutilisation <Guide dinstallation> (le prsent manuel) :

Ces instructions expliquent comment connecter le module central aux priphriques requis, comment les installer et comment effectuer les paramtrages (extraits). pp Manuel dutilisation <Instructions de configuration> (ficher PDF) :

Ces instructions dcrivent les paramtrages effectuer avant que cet appareil ne puisse tre utilis. pp Manuel dutilisation <Guide dutilisation du navigateur> (fichier PDF) :

Ces instructions expliquent laccs depuis le navigateur. Afin de lire les fichiers PDF, vous avez besoin de Adobe Reader disponible auprs de Adobe Systems. Si Adobe Reader nest pas install sur lordinateur, tlcharger sa version la plus rcente depuis le site Web dAdobe et linstaller. Important pp Tlcharger le Manuel dutilisation <Instructions de configuration/Guide dutilisation du navigateur> depuis la page daccueil indique ci-dessous. http://www.panasonic.com/business/POS-drive-through/manuals.asp pwAccessoires standard Cordon dalimentation ..........................................................1 Support de montage mural ..................................................1 Pince de cordon dalimentation ...........................................1 Pince (pour fixer le cordon dalimentation au mur) ..............1 Manuel dutilisation (cette documentation) ..........................1 pwLes marques commerciales sont des marques commerciales dposes pp Adobe, Acrobat Reader, et Adobe Reader sont soit des marques dposes ou des marques commerciales de Adobe Systems Incorporated aux tats-Unis et/ou dans dautres pays. pp Les logos SD et SDHC sont des marques commerciales de SD-3C, LLC. pp Les autres noms de compagnie et de produit qui figurent dans ce manuel dutilisation sont peut-tre les marques commerciales, dposes ou non, de leurs propritaires respectifs. 51 WX-CC411_PGQX2068ZA_IG.indb 51 2016/05/18 13:30:49 Franais Avant utilisation pwAbrviations Les abrviations suivantes sont utilises dans ce document. Les cartes mmoire SDHC et SD sont appeles cartes SD. pwLimitation de responsabilit CETTE PUBLICATION EST FOURNIE COMME TEL SANS GARANTIE DE TOUTE SORTE, EXPRS OU IMPLICITE, TANT INCLUSE MAIS NON LIMITE AUX GARANTIES IMPLICITES DE LA VALEUR MARCHANDE, ADAPTATION POUR TOUT BUT PARTICULIER OU NON-INFRACTION DES DROITS DUN TIERS. pwDni de la garantie EN AUCUN CAS Panasonic Corporation NE SERA TENU POUR RESPONSABLE POUR TOUTE PARTIE OU TOUTE PERSONNE, LEXCEPTION DU REMPLACEMENT OU DUNE MAINTENANCE RAISONNABLE DE CE PRODUIT POUR LES CAS CITS, INCLUS MAIS NON LIMITS CE QUI SUIT:

(1) TOUT DGT ET PERTE, Y COMPRIS SANS LIMITATION, DIRECT OU INDIRECT, SPCIAL, IMPORTANT OU EXEMPLAIRE, SURVENANT OU CONCERNANT LE PRODUIT;

(2) BLESSURE PERSONNELLE OU TOUT DGT CAUSS PAR UN USAGE NON APPROPRI OU UNE UTILISATION NGLIGENTE DE LUTILISATEUR;

(3) DMONTAGE, RPARATION OU MODIFICATION NON AUTORISS DU PRODUIT EFFECTUS PAR LUTILISATEUR;

(4) TOUT PROBLME ENTRANANT UN CHEC DE TRANSMISSION DE SIGNAL RSULTANT EN UNE INCOMMODIT IMPORTANTE DE CONSQUENCE, PERTE OU DGTS, SURVENANT ET ENTRANANT UNE PANNE DU SYSTME, ANOMALIE, CONFIGURATION OU INSTALLATION.

(5) TOUT PROBLME, INCOMMODIT IMPORTANTE OU PERTE OU ENDOMMAGEMENT, SURVENANT DU SYSTME COMBIN PAR LES APPAREILS DE TIERS.

(6) DES BLESSURES PERSONNELLES, TOUTE PERTE OU DGTS, PROVENANT DUNE CHUTE PROVOQUE PAR UNE INSTALLATION INACHEVE.

(7) TOUTE RECLAMATION OU ACTION ENTREPRISE POUR DES DOMMAGES, SOUMISE PAR TOUTE PERSONNE OU ORGANISATION ETANT UN SUJET PHOTOGENE, DU A LA VIOLATION DE LINTIMITE AVEC POUR RESULTAT DES IMAGES DE SURVEILLANCE DE CAMERA VIDEO, Y COMPRIS DES DONNEES SAUVEGARDEES, POUR UNE RAISON QUELCONQUE, EST DIFFUSEE PUBLIQUEMENT OU EST EMPLOYEE DANS NIMPORTE QUEL BUT;

(8) PERTES DE DONNES ENREGISTRES PROVOQUES PAR UNE PANNE. pwScurit rseau Comme cet appareil sera utilis en rseau, prire de prter attention aux risques de scurit qui suivent.

(1) Fuite ou vol dinformations au moyen de cet appareil

(2) Utilisation de cet appareil pour des oprations illgales par des personnes mal intentionnes

(3) Interfrence ou arrt de cet appareil par des personnes mal intentionnes Vous avez la responsabilit de prendre des prcautions telles que celles dcrites ci-dessous pour vous protger contre les risques de scurit rseau mentionns ci-dessus. pp Utiliser cet appareil dans un rseau scuris et non connect lInternet. pp Si cet appareil est connect un rseau qui comprend des ordinateurs, sassurer que le systme nest pas infect par des virus dordinateur ou autres entits malveillantes ( laide dun programme antivirus, anti espion ou autre rgulirement mis jour). pp Protger le rseau contre les accs non autoriss en limitant laccs aux utilisateurs qui se connectent avec un nom dutilisateur autoris et un mot de passe. pp Aprs laccs cet appareil par ladministrateur, tous les navigateurs Web doivent tre imprativement ferms. pp Le mot de passe de ladministrateur doit tre modifi intervalles rguliers. pp Mettre en uvre des mesures telles que lauthentification dutilisateur sur les serveurs et priphriques connects pour protger le rseau contre les fuites ou vols dinformations, y compris les donnes dimage, informations dauthentification

(noms dutilisateur et mots de passe), informations de courriel dalarme, informations de serveur FTP, etc. 52 WX-CC411_PGQX2068ZA_IG.indb 52 2016/05/18 13:30:49 Mesures de prcaution pwPrcautions dutilisation pp Lappareil est destin une utilisation seulement interne. Il ne peut pas sutiliser en extrieur. viter dinstaller dans un emplacement o lunit sera expose lensoleillement direct pour de longues priodes, ou proximit dun appareil de climatisation ou de chauffage. Sinon, une dformation, une dcoloration, un dysfonctionnement et/ou des problmes dutilisation risque den rsulter. Utilisez lappareil labri dclaboussures ou de goutelettes deau. pp Manipulez lunit avec prcaution. Ce produit utilise des pices qui peuvent tre endommages par une manipulation ou un rangement inadquat. pp Ne pas utiliser cet appareil dans une atmosphre contenant des gaz inflammables. Autrement il y a risque dexplosion et de blessures. pp Ne pas installer cet appareil dans un emplacement o il sera expos aux dommages causs par le sel ou des gaz corrosifs. Autrement les pices de montage se dtrioreront et lappareil risquera de tomber, entranant une blessure ou un accident. pp Serrer les vis et boulons en appliquant le couple de serrage spcifi. Autrement lappareil risque de tomber, entranant une blessure ou un accident. pp Installer lappareil sur une surface pouvant soutenir son poids. Autrement lappareil risque de tomber ou de basculer, entranant une blessure ou un accident. Linstallation ne doit commencer quune fois la surface suffisamment renforce. pp Insrer compltement la fiche C.A.. Si la fiche nest pas compltement insre, un incendie d une surchauffe ou une dcharge lectrique sont possibles. Ne pas utiliser de fiche endommage ni de prise secteur dtache. pp Ne pas toucher ce produit ni le cble en cas dorage. Un choc lectrique risque de se produire. pp Ne pas mettre de contenants deau ou autre liquide sur lappareil ou tout prs. Il y a risque dincendie ou de dcharge lectrique si de leau ou tout autre liquide pntre dans lappareil. Le cas chant, dbrancher immdiatement le cordon dalimentation et contacter le magasin o lappareil a t achet. pp Ne pas insrer dobjets trangers. Il y a risque dincendie ou de dcharge lectrique si de leau ou un objet mtallique pntre dans lappareil. Le cas chant, dbrancher immdiatement le cordon dalimentation et contacter le magasin o lappareil a t achet. pp Ne pas dmonter ce produit. Sinon, cela cre un risque dincendie ou de choc lectrique. pp Ne rien tenter qui puisse endommager le cordon dalimentation ou la fiche C.A.. Ne pas endommager ni modifier le cordon, ne pas le placer proximit dobjets chauds, le plier, le tordre, ou tirer dessus avec force, ne pas y placer dobjets lourds, ni mme le serrer de manire excessive. Continuer utiliser un cordon endommag pourrait provoquer un incendie, un court-circuit ou une dcharge lectrique. Si le cordon ou sa fiche doit tre rpar, contacter le magasin o lappareil a t achet. pp Ne pas essayer dinstaller lappareil ou deffectuer toute connexion pendant un orage. Autrement il y a risque dincendie ou de dcharge lectrique. pp Cesser immdiatement lutilisation si lappareil dgage de la fume, une chaleur excessive ou une odeur anormale. Ces situations comportent un risque dincendie ou de dcharge lectrique. Le cas chant, dbrancher immdiatement le cordon dalimentation et contacter le magasin o lappareil a t achet. pp Nutilisez pas cet quipement proximit dun quipement de commande automatique, par exemple lalarme dune porte anti-incendie ou autre. Les ondes radio mises par cet quipement peuvent entraner une panne ou un dysfonctionnement dun quipement automatique. pp Ne pas mettre lappareil prs dquipements mdicaux.

(Ne pas apporter lappareil dans une salle dopration, une unit de soins intensifs ou une unit de soins coronariens.) Les ondes radio emises par cet equipement peuvent entrainer une panne ou un dysfonctionnement dquipements mdicaux. pp Demander au magasin o lappareil a t achet deffectuer le travail dinstallation. Linstallation de cet appareil requiert de lexpertise et de lexprience. Autrement il y a risque de blessure et lappareil peut subir des dommages. Penser demander au magasin o lappareil a t achet deffectuer ce travail dinstallation. pp Ne pas mettre cet appareil dans un emplacement humide ou sale. Il y a risque de blessure. cran tactile pp Neffectuer les commandes quavec un seul doigt sur lcran tactile. Lcran tactile risque de ne pas bien fonctionner sil est touch simultanment avec deux doigts ou plus. pp Ne pas utiliser un stylo bille ou tout autre objet pointe dure ou tranchante, y compris les ongles, pour effectuer les commandes sur lcran tactile. pp Ne pas appuyer trop fort sur laffichage ACL. pp Ne pas utiliser les pellicules de protection pour affichage ACL disponibles sur le march. (Lcran tactile risquerait de ne pas bien fonctionner.) pp Il se peut que la face intrieure de laffichage ACL sembue ou que de la condensation (des gouttelettes deau) prenne forme et que laffichage ne fonctionne pas bien lorsque la temprature varie brusquement, par exemple aprs la mise en marche dun climatiseur ou dun appareil de chauffage. Le cas chant, laisser lappareil sadapter la temprature pendant une heure ou deux avant de le rutiliser. Pour couper lalimentation Ce produit ne possde aucun interrupteur dalimentation. Dbrancher le cordon dalimentation du produit de la prise de sortie secteur pour couper lalimentation. Sil est difficile de dbrancher le cordon dalimentation en raison des conditions dinstallation, brancher le cordon dalimentation du produit la prise secteur en passant par lintermdiaire du disjoncteur dun tableau de distribution ou la prise dentre dalimentation secteur dune unit de commande dalimentation. Batterie de secours intgre Ne pas exposer la batterie de secours intgre une chaleur excessive, par exemple la lumire solaire directe ou au feu. Vitesse dactualisation de limage de la camra Il se peut que la vitesse dactualisation de limage soit plus lente, suivant lenvironnement rseau utilis, le nombre de camras et leur configuration, le sujet et le nombre daccs. 53 WX-CC411_PGQX2068ZA_IG.indb 53 2016/05/18 13:30:50 Franais Mesures de prcaution Cartes SDHC/SD pp Avant dutiliser une carte SDHC ou SD non formate, la formater au moyen du module central. Le formatage dune carte supprime tous les enregistrements quelle contient. Si lon utilise une carte SDHC ou SD non formate ou qui a t formate sur un autre appareil que le module central, il se peut quelle ne fonctionne pas bien ou que son rendement soit affect. pp Certaines cartes SDHC ou SD, lorsque utilises sur cet appareil, peuvent ne pas bien fonctionner ou voir leur rendement affect. Il est prfrable dutiliser les cartes SDHC et SD recommandes. Cartes SDHC et SD recommandes Cartes fabriques par Panasonic Corporation (vendues sparment) Cartes SDHC : 4 Go, 8 Go, 16 Go, 32 Go Cartes SD : 2 Go

( lexception des cartes miniSD et microSD) pp Lorsque les cartes SD sont formates ou leurs donnes effaces ou supprimes laide des fonctions du module central ou dun ordinateur, il arrive frquemment que les donnes de la carte ne puissent tre parfaitement supprimes. Avant de remettre une carte quelquun, il est recommand dutiliser une application logicielle pour ordinateur disponible dans le commerce pour supprimer compltement les donnes de la carte. pp Avant dliminer les cartes SD, il faut les dtruire physiquement ou supprimer compltement leurs donnes ;

ne pas les jeter avec les ordures mnagres, et les liminer en respectant la rglementation locale en matire dlimination des dchets. Nettoyage de lcran tactile pp Il est recommand de nettoyer lcran tactile intervalles rguliers. pp Lorsque des poussires, taches dhuile, taches de graisse et autres salets sont visibles sur lcran tactile, le nettoyer immdiatement. pp Enlever doucement les salets ou poussires laide dun linge doux et sec. pp Laffichage ACL risque dtre endommag si lon applique une pression excessive en essuyant lcran tactile ou en appuyant dessus, ou sil est heurt ou plac sous un objet lourd. pp Nutiliser ni nettoyant liquide ni nettoyant en vaporisateur. Cela risquerait daffecter le fonctionnement de lcran tactile. pp Ne pas laisser les produits de caoutchouc ou de vinyle en contact avec lcran tactile pendant de longues priodes. Cela peut causer de la dcoloration ou de la dtrioration. pp Ne pas utiliser de benzne, diluant peinture, adhsif, agent nettoyant base dalcali ou dalcool, nettoyant pour verre, cire, nettoyant abrasif, nettoyant en poudre, insecticide, etc. Cela peut causer la dgradation des couleurs et de la texture. (Lors du nettoyage avec un chiffon trait chimiquement, lire les mises en garde qui laccompagnent.) pwPrcautions dinstallation AVERTISSEMENT : Par mesure de protection contre les blessures, cet appareil doit tre mont sur un mur, en suivant les instructions du Manuel dutilisation. Panasonic nassume aucune responsabilit en cas de dommages corporels ou matriels rsultant de pannes dues une installation incorrecte ou une utilisation contraire ce qui est indiqu dans cette documentation. 54 viter toute installation dans les emplacements suivants. pp Emplacements exposs la lumire solaire directe pp Emplacements exposs de fortes vibrations ou des chocs pp Emplacements qui ne sont pas de niveau pp Emplacements sous un climatiseur pp Emplacements proches de la friteuse pp Emplacements proches dun grill pp Emplacements o un agent chimique est utilis comme dans le cas dune piscine pp Emplacements situs prs dune source de champ magntique telle quun tlviseur ou des haut-parleurs pp Emplacements o de la condensation se forme facilement, o la temprature varie beaucoup, et emplacements humides pp Emplacements poussireux pp Emplacements exposs des claboussures ou des vaporisations deau pp Emplacements o des missions de rayonnement ou de rayon X sont produites Le cordon dalimentation fourni en accessoire ne doit tre utilis quavec cet appareil. Ne lutiliser avec aucun autre appareil. De mme, ne pas utiliser le cordon dalimentation dun autre appareil avec cet appareil. Mise la terre Confirmer que le fil de mise la terre est connect correctement de la borne SIGNAL GND la masse de mise la terre. La mise la terre doit tre faite avant de raccorder la prise dalimentation ou ce produit lalimentation gnrale. Sassurer que la prise dalimentation du produit est d branche de lalimentation gnrale au moment de dbrancher le fil de mise la terre. Source dalimentation utiliser La tension dalimentation de cet appareil est de 100 V 120 V C.A. (50 Hz/60 Hz). Brancher cet appareil sur une source dalimentation dune capacit suffisante. Pour couper lalimentation Ce produit ne possde aucun interrupteur dalimentation. Dbrancher le cordon dalimentation du produit de la prise de sortie secteur pour couper lalimentation. Sil est difficile de dbrancher le cordon dalimentation en raison des conditions dinstallation, brancher le cordon dalimentation du produit la prise secteur en passant par lintermdiaire du disjoncteur dun tableau de distribution ou la prise dentre dalimentation secteur dune unit de commande dalimentation. Le cordon dalimentation doit tre branch sur lun ou lautre des dispositifs de disjonction suivants :

pp Brancher le cordon dalimentation sur une unit de commande dalimentation dnergie. pp Installer lappareil prs dune prise de courant, et brancher la fiche du cordon dalimentation. pp Brancher le cordon dalimentation sur un disjoncteur dont le tableau de distribution a un cartement de contacts de 3,0 mm ou plus. Le disjoncteur doit tre capable de fermer tous les ples de lalimentation principale, lexception du conducteur de protection mis la masse. Paramtrage de lheure Avant dutiliser cet appareil, il faut paramtrer lheure. Au sujet de la faon de paramtrer lheure, se reporter au Manuel dutilisation <Instructions de configuration>. WX-CC411_PGQX2068ZA_IG.indb 54 2016/05/18 13:30:50 Principaux organes de commande et fonctions pwPanneau avant 1 Affichage ACL Il sagit dun affichage ACL couleur de type 7. Il indique ltat de fonctionnement de lappareil et des dtails sur les oprations et paramtres. 2 cran tactile Il sagit dun cran tactile de type 7,8. Il sert commander cet appareil. 3 Couvercle de bornier Cest ici que se trouve l Eurobloc (un bornier de type europen) pour les signaux dentre/sortie audio et les signaux dentre/sortie de commande. WX-CC411_PGQX2068ZA_IG.indb 55 2016/05/18 13:30:50 55 Franais Principaux organes de commande et fonctions pwBornier LANE A LANE B CNT COM CNT 1 DEVICE COM CNT COM COM CNT 2 CNT ALERT CNT TxD SG RxD RS-232C VIDEO OUT 10BASE-T 100BASE-TX 4 Borne dentre dalimentation [AC IN]

Brancher le cordon dalimentation en accessoire sur cette borne. Aprs lavoir branch, fixer le cordon laide de la pince de cordon dalimentation. (Se reporter Fixation du cordon dalimentation, p.68.) 5 Fentre de confirmation [CHECK]

Cette fentre sert effectuer des vrifications une fois lappareil install. 6 Entre de microphone dalle A [OUT MIC]

Cette entre se connecte au microphone de la borne de commande installe sur lalle A. 7 Sortie de haut-parleur dalle A

[OUT SP (8 ) Class2 Wiring]

Cette sortie se connecte au haut-parleur de la borne de commande installe sur lalle A. 8 Sortie de ligne dalle A [LINE OUT]

Cette sortie met la mme communication que celle mise par la sortie OUT SP de lalle A. 9 Entre de microphone de cuisine dalle A

[AUX MIC]

Cette entre se connecte au microphone col de cygne install dans la cuisine dalle A. Elle sert parler au client arriv la borne de commande de lalle A.

: Sortie de haut-parleur de cuisine dalle A

[AUX SP (8 ) Class2 Wiring]

Elle se connecte au haut-parleur install dans la cuisine dalle A. Elle sert parler au client arriv la borne de commande de lalle A. Entre de ligne dalle A [LINE IN]

Elle permet de diffuser simultanment les communications externes vers tous les casques dcoute tout-en-un ou modules de commande pour ceinture et vers le haut-parleur de cuisine dalle A. 56 Entre de dtecteur de vhicule dalle A [VDET]

Elle se connecte au dtecteur de vhicule install sur lalle A. Entre de microphone dalle B [OUT MIC]

Cette entre se connecte au microphone de la borne de commande installe sur lalle B. Sortie de haut-parleur dalle B

[OUT SP (8 ) Class2 Wiring]

Cette sortie se connecte au haut-parleur de la borne de commande installe sur lalle B. Sortie de ligne dalle B [LINE OUT]

Cette sortie met la mme communication que celle mise par la sortie OUT SP de lalle B. Entre de microphone de cuisine dalle B

[AUX MIC]

Cette entre se connecte au microphone col de cygne install dans la cuisine dalle B. Elle sert parler au client arriv la borne de commande de lalle B. Sortie de haut-parleur de cuisine dalle B

[AUX SP (8 ) Class2 Wiring]

Elle se connecte au haut-parleur install dans la cuisine dalle B. Elle sert parler au client arriv la borne de commande de lalle B. Entre de ligne dalle B [LINE IN]

Elle se connecte au dtecteur de vhicule install sur lalle B. WX-CC411_PGQX2068ZA_IG.indb 56 2016/05/18 13:30:50 Sortie de commande externe [DEVICE]

Cette sortie de commande externe est utilise pour les alertes. Ce connecteur, qui utilise les paramtres de cet appareil, est command en rponse aux signaux dalerte reus des casques dcoute tout-en-un ou modules de commande pour ceinture et des signaux provenant de lentre dalerte. Entre dalerte [ALERT]

Ce connecteur dentre externe est utilis pour les alertes. Il se connecte un capteur ou un autre priphrique externe. Port srie [RS-232C]

Ce port sert commander le systme depuis un ordinateur. Pour plus de dtails, contacter le magasin o lappareil a t achet. Sortie vido [VIDEO OUT]

Ce connecteur composite de type NTSC sert la sortie de limage des camras. Pour plus de dtails, contacter le magasin o lappareil a t achet. Port rseau [10BASE-T/100BASE-TX]

Ce port se connecte un rseau 10BASE-T ou 100BASE-TX, et il connecte la camra en rseau au module central. pwPanneau latral Touche de rinitialisation Lorsque lappareil ne fonctionne pas bien, le redmarrer en appuyant sur ce bouton laide dun objet pointe fine. Fente pour carte SD Cette fente sert linsertion dune carte SD. DEL daccs la carte SD Elle indique ltat daccs la carte SD. Elle clignote en vert pendant laccs la carte SD. Important pp Pendant que la DEL daccs la carte SD clignote, ne pas jecter la carte SD, dbrancher la fiche dalimentation ou appuyer sur la touche de rinitialisation. Lexcution de lune ou lautre de ces actions peut entraner la destruction des donnes de la carte. 57 WX-CC411_PGQX2068ZA_IG.indb 57 2016/05/18 13:30:50 Franais Principaux organes de commande et fonctions pwcran Les quatre boutons suivants, spars des boutons de laffichage ACL, saffichent en permanence sur lcran tactile. L M N O L Bouton Informations sur paramtrages N Bouton daffichage de camra Ce bouton sert afficher les paramtres et tats.

(Se reporter cran Informations sur paramtrages, p.60.) Ce bouton sert afficher les images des camras en rseau Panasonic enregistres. (Se reporter cran de contrle des camras, p.62.) M Bouton de paramtrage O Bouton Opration express Ce bouton sert afficher lcran de saisie du mot de passe. Une fois le mot de passe confirm, lcran de la liste de paramtres saffiche. (Se reporter cran de saisie du mot de passe, p.62.) Ce bouton sert afficher lcran Opration express utilis pour les oprations de service au volant. (Se reporter cran Opration express, p.63.) 58 WX-CC411_PGQX2068ZA_IG.indb 58 2016/05/18 13:30:53 Description des crans pwcran de base Lcran de base qui apparat sur laffichage ACL est dcrit ci-dessous. 6 Affichage du mode de voix (alle B) Saffiche en vert pendant que le personnel du magasin parle au client de lalle B. 9

7 Affichage dINTER. (alle B) Saffiche en vert pendant que les employs du personnel du magasin sur lalle B parlent entre eux. 8 Bouton ENR. Saffiche en rouge lorsquune communication est en cours denregistrement suite une alerte de scurit. 9 Affichage du titre Indique le titre de lcran actuellement affich.

: Affichage de date et dheure La date et lheure actuelles saffichent.

* apparat devant laffichage de lheure pendant la priode dheure avance (heure dt). pp La date et lheure de cet appareil sont paramtres dans lordre suivant :mois / jour / anne heure:minutes pp Lheure est affiche sous forme dhorloge cycle de 24 heures. 1 2 3 4 5 6 7 8 1 Affichage dalerte de scurit Saffiche en rouge lorsquune alerte de scurit est reue dun priphrique externe, dun casque dcoute tout-en-

un ou dun module de commande pour ceinture. 2 Affichage de dtection de vhicule (alle A) Saffiche en orange lorsquun vhicule arrive la borne de commande de lalle A. 3 Affichage du mode de voix (alle A) Saffiche en orange pendant que le personnel du magasin parle au client de lalle A. 4 Affichage dINTER. (alle A) Saffiche en orange pendant que les employs du personnel du magasin sur lalle A parlent entre eux. 5 Affichage de dtection de vhicule (alle B) Saffiche en vert lorsquun vhicule arrive la borne de commande de lalle B. WX-CC411_PGQX2068ZA_IG.indb 59 2016/05/18 13:30:54 59 Franais Description des crans pwcran Informations sur paramtrages Lcran Informations sur paramtrages apparat lorsque lon appuie sur

(bouton Informations sur paramtrages) sur lcran tactile. Les paramtres et tats de cet appareil peuvent tre vrifis sur cet cran. 1 2 3 4 1 Infos-paramtrages [Infos-param.]

Lorsque lon appuie sur le bouton Infos-param., laffichage ACL permute sur lcran de liste de paramtrages. 2 Alerte de scurit [Alerte scurit]

Lorsque lon appuie sur le bouton Alerte scurit, laffichage ACL permute sur lcran Alerte scurit.

(P.61) 3 Aide-ressource [Aide-ressource]

Lorsque lon appuie sur le bouton Aide-ressource, laffichage ACL permute sur lcran Aide-ressource. (P.62) 4 Informations sur systme [Infos-systme]

Lorsque lon appuie sur le bouton Infos-systme, laffichage ACL permute sur lcran Infos-systme. (P.62) cran de liste de paramtrages Lcran de liste de paramtrages saffiche lorsque lon allume lappareil ou lorsque lon touche le bouton [Infos-

param.]. 3 6 7 98

:4 5 2 1 60 1 Affichage du nom dalle [A] ([B]) Le nom de lalle saffiche. Les tats de paramtrage de lalle saffichent droite du nom de lalle. Avec le WX-CC412A, lalle B saffiche aussi sous lalle A. 2 Affichage du mode dalle [Simple/Double/Tandem]

Le mode dalle paramtr saffiche. WX-CC411A : [Simple] saffiche. WX-CC412A : [Double] saffiche lorsque le paramtre dalle tandem est NON, et [Tandem] lorsquil est OUI. 3 Affichage du volume de nuit

[Volume de nuit OUI/NON/AUTO]

Ltat de paramtrage du volume de nuit du haut-parleur de la borne de commande saffiche. Remarque pp Le volume de nuit est une fonction qui sert ajuster le niveau du volume de la sortie vocale mise par le haut-parleur de la borne de commande. 4 Affichage de lquipe express

[quipe exp OUI/NON]

Ltat de lopration dquipe express saffiche. Remarque pp Opration quipe express dsigne un mode dopration o, lorsque lachalandage des vhicules dpasse la capacit des alles, le fonctionnement normal est interrompu, les dtecteurs de vhicule sont ferms et les membres du personnel du magasin se rendent en personne aux vhicules des clients pour prendre les commandes. 5 Affichage Bip trans. [Bip trans. OUI/NON]

Ltat du bip trans-alle est affich. Il napparat quavec le WX-CC412A. Remarque pp Bip trans. est une fonction qui sert envoyer une tonalit pour annoncer larrive des clients sur les deux alles. 6 Affichage du volume du haut-parleur de la borne de commande dalle A [Ext.]

Le niveau du volume du haut-parleur de la borne de commande dalle A saffiche. 7 Affichage du volume du haut-parleur de la cuisine dalle A [AUX]

Le niveau du volume du haut-parleur de la cuisine dalle A saffiche. WX-CC411_PGQX2068ZA_IG.indb 60 2016/05/18 13:30:55 8 Affichage du volume du microphone de la borne Affichage OUI/NON de Dtect./V. dsactiv de commande dalle A [Ext.]

Le niveau du volume du microphone de la borne de commande dalle A saffiche. 9 Affichage du volume du microphone de la cuisine dalle A [AUX]

Le niveau du volume du microphone de la cuisine dalle A saffiche.

: Affichage du volume de la tonalit dalle A

[Bip]

Le niveau du volume de la tonalit dalle A saffiche. Affichage du volume dentre de ligne dalle A

[E-ligne]

Le niveau du volume de lentre de ligne dalle A saffiche. Affichage du volume de sortie de ligne dalle A

[S-ligne]

Le niveau du volume de la sortie de ligne dalle A saffiche. Affichage OUI/NON du microphone de la borne de commande dalle A [Mic.ex OUI/NON]

Le paramtre qui dtermine sil faut mettre la voix du microphone de la borne de commande dalle A vers le haut-parleur de la cuisine dalle A saffiche. Affichage OUI/NON du microphone de la cuisine dalle A [Mic.AUX OUI/NON]

Le paramtre qui dtermine sil faut mettre la voix du microphone de la cuisine dalle A vers le haut-parleur de la cuisine dalle A saffiche. Affichage OUI/NON de voix dalle A

[VOIX OUI/NON]

Le paramtre qui dtermine sil faut mettre la voix vers le haut-parleur de la cuisine dalle A saffiche. Remarque pp Voix dsigne les communications entre les clients et le personnel du magasin. Affichage OUI/NON de la tonalit dalle A

[Bip OUI/NON]

Le paramtre qui dtermine sil faut mettre la tonalit vers le haut-parleur de la cuisine dalle A saffiche. Affichage OUI/NON dINTER. dalle A

[INTER. OUI/NON]

Le paramtre dintercommunication dalle A saffiche. Remarque pp Intercommunication dsigne les communications entre les membres du personnel du magasin. dalle A [Dt/V dsact. OUI/NON]

Ltat de Dtect./V. dsactiv de lalle A saffiche. Remarque pp Dtect./V. dsactiv est une fonction qui sert paramtrer les dtecteurs de vhicule virtuellement sur OUI et maintenir le microphone et le haut-

parleur de la borne de commande sur le paramtre OUI. cran Alerte scurit Lcran Alerte scurit apparat lorsque lon appuie sur le bouton [Alerte scurit] sur lcran Informations sur paramtrages. 1 2 3 1 Cause et Temps dinitiation

: Alertes envoyes par les membres du La cause de lalerte de scurit et lheure du dclenchement saffichent.

[Touche F]

personnel du magasin quips de casques dcoute tout-

en-un ou de modules de commande pour ceinture.

[Alertes 1 4] : Alertes envoyes par les priphriques externes 1 4. 2 Bouton Effacer [Effacer]

Appuyer sur ce bouton pour forcer lannulation de lalerte de scurit. 3 Bouton Arrt. [Arrt.]

Appuyer sur ce bouton pour arrter le message dalerte de lalerte de scurit. Il apparat lorsque la Lecture de message dalerte a t paramtre pour les oprations effectuer aprs le dclenchement dune alerte de scurit. 61 WX-CC411_PGQX2068ZA_IG.indb 61 2016/05/18 13:30:56 Franais Description des crans cran Aide-ressource Lcran Aide-ressource apparat lorsque lon appuie sur le bouton [Aide-ressource] sur laffichage ACL. Les coordonnes du service daide durgence saffichent sur cet cran. Ces coordonnes peuvent tre dfinies sur lcran de paramtrages. Il est possible denvoyer un courriel depuis cet cran si ladresse de courriel a t paramtre lavance au moyen du navigateur. Remarque pp Il nest pas possible dafficher le rsultat de lenvoi du courriel lorsque, par exemple, lenvoi choue parce que le serveur est en panne ou que ladresse de courriel paramtre est errone. Au moment de linstallation de cet appareil, vrifier lavance si lenvoi des courriels fonctionne bien. cran Infos-systme Lcran Infos-systme apparat lorsque lon appuie sur le bouton [Infos-systme] sur laffichage ACL. pwcran de saisie du mot de passe Le mot de passe doit tre saisi pour vrification avant que lon puisse passer lcran de paramtrages. Lcran de saisie du mot de passe apparat lorsque lon appuie sur

(bouton de paramtrage). Pour plus de dtails sur la faon de saisir les caractres, se reporter Saisie des caractres, p.74. Mot de passe par dfaut: 12345 Important pp Par mesure de scurit, modifier le mot de passe intervalles rguliers. pwcran de contrle des camras Lcran de contrle des camras apparat sur laffichage ACL lorsque lon appuie sur camra) sur lcran tactile.

(bouton daffichage de 1 2 5 6 7 8 9 Ltat du rseau est indiqu sur cet cran. 3 4 1 cran de camra 1 Limage de la camra en rseau 1 apparat dans cette partie de lcran. 2 cran de camra 2 Limage de la camra en rseau 2 apparat dans cette partie de lcran. 3 cran de camra 3 Limage de la camra en rseau 3 apparat dans cette partie de lcran. 62 WX-CC411_PGQX2068ZA_IG.indb 62 2016/05/18 13:30:58 4 cran de camra 4 Limage de la camra en rseau 4 apparat dans cette partie de lcran. 5 Bouton daffichage plein cran de la camra 1 Lorsque lon appuie sur ce bouton, limage de la camra en rseau 1 saffiche en mode plein cran. 6 Bouton daffichage plein cran de la camra 2 Lorsque lon appuie sur ce bouton, limage de la camra en rseau 2 saffiche en mode plein cran. 7 Bouton daffichage plein cran de la camra 3 Lorsque lon appuie sur ce bouton, limage de la camra en rseau 3 saffiche en mode plein cran. 8 Bouton daffichage plein cran de la camra 4 Lorsque lon appuie sur ce bouton, limage de la camra en rseau 4 saffiche en mode plein cran. 9 Bouton daffichage simultan des 4 crans Lorsque lon appuie sur ce bouton, lcran se divise en quatre sections et affiche simultanment limage des camras en rseau 1, 2, 3 et 4. Remarque pp Lorsque lon touche une image de camra alors que lcran est divis en quatre sections daffichage simultan, limage touche saffiche en mode plein cran. pwcran Opration express Lcran Opration express apparat sur laffichage ACL lorsque lon appuie sur sur lcran tactile.

(bouton Opration express) 1 2 3 1 Bouton Communs Ce bouton sert afficher lcran Opration express commun aux deux alles. 2 Bouton Alle A Ce bouton sert afficher lcran Opration express pour lalle A. 3 Bouton Alle B Ce bouton sert afficher lcran Opration express pour lalle B. Remarque pp Le bouton Alle B ne saffiche quavec le WX-CC412A. WX-CC411_PGQX2068ZA_IG.indb 63 2016/05/18 13:30:59 63 Franais Dispositifs associs Les dispositifs associs au systme dintercommunication sans fil sont indiqus ci-dessous. uModule central WX-CC411A/WX-CC412A u Module de commande pour ceinture WX-CT420 u Casque dcoute tout-en-un WX-CH450 uCasque dcoute WX-CH427 u Pile WX-B3030 u Chargeur de pile WX-Z3040A u Rpteur sans fil WX-CR470 64 WX-CC411_PGQX2068ZA_IG.indb 64 2016/05/18 13:31:01 Procdures dinstallation pwChoix de lemplacement dinstallation du module central Choisir un mur pour le montage de lappareil, percer un trou dans le mur pour y faire passer les cbles, et choisir lemplacement des quatre vis, tel quillustr ci-dessous. 190 200 5 3 1 5 2 0 4 5 Important pp Sassurer que la surface dinstallation a la rsistance larrachement indique ci-dessous. pw Installation 1 Monter lappareil laide du support de montage mural en accessoire et des 4 vis (4,1 mm 25 mm

{5/32 po 63/64 po}).

[Rsistance minimale larrachement : 780 N {80 kgf}]

Vis ( se procurer localement)

(vis bois :

4,1 mm 25 mm

{5/32 po 63/64 po}) Voie de passage des cbles 65 WX-CC411_PGQX2068ZA_IG.indb 65 2016/05/18 13:31:01 Franais Procdures dinstallation 2 Monter lappareil sur les quatre crochets du support de montage mural. 3 Vrifier sur la fentre de confirmation (marque CHECK) que lappareil est mis en place correctement. LANE A LANE B CNT COM CNT 1 DEVICE COM COM CNT 2 CNT ALERT CNT TxD SG RxD RS-232C VIDEO OUT 10BASE-T 100BASE-TX Sassurer que les marques du support de montage mural sont visibles. Si elles ne sont pas visibles, cela signifie que lappareil nest pas bien install. 66 WX-CC411_PGQX2068ZA_IG.indb 66 2016/05/18 13:31:02 4 Utiliser la pince en accessoire pour fixer le cordon dalimentation au mur, et fixer la pince laide de la vis (4,1 mm 25 mm {5/32 po 63/64 po}).

[Rsistance minimale larrachement : 780 N {80 kgf}]

Vis ( se procurer localement) 150 mm 200 mm

{5-15/16 po 7-7/8 po}

WX-CC411_PGQX2068ZA_IG.indb 67 2016/05/18 13:31:02 67 Franais Connexions pwOuverture du couvercle de connecteurs Appuyer sur la zone indique par 1 et faire glisser le couvercle de connecteurs vers le bas, puis tirer vers soi la partie infrieure du couvercle indique par 2. pwFixation du cordon dalimentation 1 Insrer la pince de cordon dalimentation en accessoire dans lappareil. 68 WX-CC411_PGQX2068ZA_IG.indb 68 2016/05/18 13:31:02 2 Avant de poursuivre, abaisser la pince de cordon dalimentation insre dans lappareil, tel quillustr ci-dessous. Insrer la fiche du cordon dalimentation dans la prise dalimentation de lappareil, ajuster la position de la pince de cordon dalimentation, et fixer le cordon dalimentation. pwCblage du connecteur Euroblock 1 Un connecteur Euroblock amovible est fourni pour les connecteurs de lappareil. Tel quillustr ci-dessous, insrer la pointe dun tournevis plat dans linterstice, et retirer de lappareil le connecteur Euroblock. WX-CC411_PGQX2068ZA_IG.indb 69 2016/05/18 13:31:02 69 Franais Connexions 2 Connecter les cbles au connecteur Euroblock. laide dun tournevis plat, desserrer lune aprs lautre les vis du connecteur Euroblock, dtacher le matriau isolant autour de chaque cble, torsader fermement les conducteurs, insrer lextrmit des conducteurs dans le connecteur Euroblock, et serrer les vis du connecteur Euroblock. 7 mm 1 mm

{9/32 po 1/16 po}

Remarque Mise en forme des fils pp Cbles recommands : AWG 28 16 (Ne pas utiliser de cbles souds.) pp Longueur de matriau isolant dtacher : 7 mm 1 mm {9/32 po 1/16 po}

pp Diamtre de vis : 2 mm {3/32 po}

pp Sassurer davoir fermement connect les cbles. Spcifications lectriques des connecteurs pp Connecteurs DEVICE CNT et DEVICE COM Connecter un priphrique externe entre les connecteurs CNT et COM. Ces connecteurs sont isols de la circuiterie interne par un photocoupleur. Circuiterie interne (polaire) Max. 50 mA CNT Spcifications lectriques :

Tension de commande 30 V, courant de commande 50 mA Priphrique externe Photocoupleur COM pp Connecteurs ALERT CNT et ALERT COM Connecter un priphrique externe entre les connecteurs CNT et COM. Ces connecteurs fonctionnent par action travail. Le connecteur COM se connecte GND dans lappareil. Spcifications lectriques :

Tension de circuit ouvert 5 V C.C., courant de court-circuit 2 mA Circuiterie interne Courant de court-

circuit 2 mA CNT Photocoupleur Priphrique externe COM 70 WX-CC411_PGQX2068ZA_IG.indb 70 2016/05/18 13:31:03 3 Installer le connecteur Euroblock, auquel les cbles ont t connects, dans lappareil. Remarque pp Insrer fermement le connecteur Euroblock dans lappareil. pwFixation du couvercle de connecteurs Faire glisser le couvercle de connecteurs par le bas, et le fixer lappareil. Remarque pp Fixer le couvercle de connecteurs fermement lappareil. WX-CC411_PGQX2068ZA_IG.indb 71 2016/05/18 13:31:03 71 Franais Connexions pwExemples de connexion Alle A CNT COM CNT 1 DEVICE COM COM CNT 2 CNT ALERT CNT TxD SG RxD RS-232C VIDEO OUT 10BASE-T 100BASE-TX Borne de commande Priphrique externe Microphone Haut-parleur

(8 ) Alle A de service au volant Microphone de cuisine Haut-parleur de cuisine (8 ) Dtecteur de vhicule tendu Dtecteurs Rfrigrateur Caisse enregistreuse, etc. Dtecteur de vhicule Moniteur de cuisine Concentrateur Alle B (uniquement avec le WX-CC412A) Ordinateur Camras en rseau Dtecteur de vhicule tendu Dtecteur de vhicule Microphone de cuisine Haut-parleur de cuisine (8 ) Ordinateur Borne de commande Microphone Haut-parleur

(8 ) Alle B de service au volant 72 WX-CC411_PGQX2068ZA_IG.indb 72 2016/05/18 13:31:04 Commandes sur cran pwCommandes de base sur cran Cette section dcrit les commandes de base sur cran. Pour plus de dtails sur lutilisation de lappareil et la slection des paramtres, se reporter au Manuel dutilisation <Instructions de configuration> (fichier PDF). 1 2 1 Bouton de retour Ce bouton sert revenir lcran prcdent. 3 2 Boutons de slection doption Lopration permute sur lcran correspondant au bouton sur lequel on a appuy. Sur lcran de paramtrage, un des boutons est slectionn (il est indiqu en orange). Suivant la situation, les boutons portent des noms diffrents. Remarque pp Comme laffichage ACL se raye facilement, toujours effectuer les commandes avec un doigt. pp Ne pas utiliser un stylo bille ou tout autre objet pointe dure ou tranchante, y compris les ongles, pour effectuer les commandes sur lcran tactile. pp Ne pas appuyer trop fort sur laffichage ACL. pp Ne pas utiliser les pellicules de protection pour affichage ACL disponibles sur le march. (Lcran tactile risquerait de ne pas bien fonctionner.) pp Il se peut que la face intrieure de laffichage ACL sembue ou que de la condensation (des gouttelettes deau) prenne forme et que laffichage ne fonctionne pas bien lorsque la temprature varie brusquement, par exemple aprs la mise en marche dun climatiseur ou dun appareil de chauffage. Le cas chant, laisser lappareil sadapter la temprature pendant une heure ou deux avant de le rutiliser. pwSaisie des paramtres Sur un cran options de paramtrage multiples, toucher le bouton [Rgler] pour valider un paramtre. 3 Boutons de slection de page Ces boutons servent slectionner la page lorsque lcran occupe plusieurs pages. Lorsque lon appuie sur le bouton lcran de la page suivante saffiche, et lorsque lon appuie sur le bouton lcran de la page prcdente saffiche. 1 1 Bouton Rgler Ce bouton sert valider tous les paramtres qui saffichent ensemble sur lcran. WX-CC411_PGQX2068ZA_IG.indb 73 2016/05/18 13:31:06 73 Franais Commandes sur cran pwSaisie des caractres Lorsquil faut saisir un mot de passe ou une adresse, utiliser les boutons du clavier pour saisir les caractres. pwSaisie de la date et de lheure Saisir la date et lheure en utilisant des boutons [+] et []. 1 6 2 3 4 5 1 Zone daffichage des caractres saisis Les caractres saisis saffichent. 2 Bouton Espace arr. Appuyer sur ce bouton pour supprimer le dernier des caractres dans la zone daffichage des caractres saisis. 1 2 3 3 Boutons de saisie des caractres Le caractre du bouton sur lequel on appuie est saisi. 1 Zone daffichage des valeurs de paramtrage Les valeurs de paramtrage actuelles saffichent. 4 Bouton Espace Appuyer sur ce bouton pour saisir une espace. 5 Bouton Rgler/Entrer [Entrer/Connexion]

Appuyer sur ce bouton pour valider la chane de caractres saisie. 6 Bouton de slection du type de caractres Appuyer sur ce bouton pour changer le type de caractres saisir. 2 Boutons + et Ajuster les paramtres en appuyant sur les boutons + et . 3 Bouton Rgler/Entrer [Rgler/Entrer]

Appuyer sur ce bouton pour valider lheure saisie. pwAjustement du niveau du volume Ajuster le niveau du volume. 2 1 2 1 Zone daffichage du niveau du volume Les niveaux de volume actuels saffichent. 2 Boutons + et Ajuster les niveaux en appuyant sur les boutons + et . Les modifications apportes au niveau du volume sappliquent immdiatement. 74 WX-CC411_PGQX2068ZA_IG.indb 74 2016/05/18 13:31:07 Procdures dutilisation pwOprations de base VOIX : Pour parler aux clients Cette fonction sert aux conversations bidirectionnelles entre les membres du personnel du magasin qui portent les casques dcoute tout-en-un ou modules de commande pour ceinture et le client la borne de commande. Pour plus de dtails sur les mthodes de conversation, se reporter au Manuel dutilisation du module de commande pour ceinture (WX-CT420) ou du casque dcoute tout-en-

un (WX-CH450). Intercommunication : Pour parler aux autres membres du personnel du magasin Les membres du personnel du magasin qui portent les casques dcoute tout-en-un ou les modules de commande pour ceinture peuvent parler entre eux sans tre entendus des clients. Pour plus de dtails sur les mthodes dintercommunication, se reporter au Manuel dutilisation du module de commande pour ceinture (WX-CT420) ou du casque dcoute tout-en-

un (WX-CH450). Permutation dalle de service au volant double (uniquement avec le WX-CC412A) Dans le cas dun service au volant double, il est possible de slectionner lalle A ou lalle B en mode de voix ou dintercommunication. Pour plus de dtails sur la faon deffectuer une permutation dalle, se reporter au Manuel dutilisation du module de commande pour ceinture (WX-CT420) ou du casques dcoute tout-en-un (WX-CH450). pwEnregistrement ID pp Pour pouvoir utiliser le mode de voix ou dintercommunication au moyen dun casque dcoute tout-en-un ou dun module de commande pour ceinture, il faut que son identifiant (ID) soit enregistr. pp Pour lenregistrement ID, paramtrer le module central sur le mode denregistrement ID, et effectuer lenregistrement sur le casque dcoute tout-en-un ou le module de commande pour ceinture en question. La procdure denregistrement ID est dcrite ci-dessous avec, titre exemple, lutilisation dun casque dcoute tout-

en-un ou module de commande pour ceinture. 1 Appuyer sur

(bouton de paramtrage) sur le panneau tactile. pp Lcran de saisie du mot de passe apparat. 2 Saisir le mot de passe, et appuyer sur le bouton [Connexion]. Mot de passe par dfaut: 12345 Important pp Par mesure de scurit, modifier le mot de passe intervalles rguliers. pp Le menu de paramtrage saffiche. WX-CC411_PGQX2068ZA_IG.indb 75 2016/05/18 13:31:08 75 Franais 5 Appuyer sur le bouton [POWER] tout en maintenant enfoncs les boutons [T1] et

[T2] sur le casque dcoute tout-en-un ou le module de commande pour ceinture. pp Le casque dcoute tout-en-un ou le module de commande pour ceinture dmarre en mode denregistrement ID. Le message vocal Mode denregistrement sera mis par lcouteur, et le tmoin dalimentation clignotera en orange. En mode denregistrement ID, les boutons et tmoins nont pas les mmes fonctions que lors du dmarrage normal. 6 Appuyer sur le bouton [T1] sur le casque dcoute tout-en-un ou le module de commande pour ceinture. pp Le casque dcoute tout-en-un ou le module de commande pour ceinture cherche un module central en mode denregistrement ID. Le message vocal Mise en circuit du module central A sera mis par lcouteur, et le tmoin dalle clignotera en orange. Dans le cas du WX-CC412A, aprs lenregistrement dalle A le message vocal Mise en circuit du module central B sera mis, et le tmoin dalle clignotera en vert. pp Si lenregistrement ID russit, le message vocal Lenregistrement est complt sera mis par lcouteur, puis le message vocal indiquant le numro du casque dcoute tout-en-un ou du module de commande pour ceinture enregistr sera mis. Le tmoin dalimentation et le tmoin dalle cessent alors de clignoter et restent allums. Aprs avoir enregistr tous les ID de casque dcoute, appuyer sur le bouton [Arrter] sur lcran Enregistrement ID. Le module central quitte le mode denregistrement ID. Le tmoin dalimentation du casque dcoute tout-en-un ou du module de commande pour ceinture passe de lorange au vert. Procdures dutilisation 3 Appuyer sur le bouton [Casques dcoute], puis sur le bouton [Enregistrement ID]. pp Lcran Enregistrement ID apparat. Remarque pp Les numros des casques dcoute tout-en-un ou de modules de commande pour ceinture enregistrs saffichent dans la zone [Casques dcoute enregistrs]. Une fois termin lenregistrement ID, lID du nouveau casque dcoute tout-en-un ou du module de commande pour ceinture enregistr est ajout. 4 Appuyer sur le bouton [Lancer]. pp Lcran flash suivant saffiche. Il nest pas possible deffectuer dautres oprations pendant lenregistrement ID. Pour poursuivre lenregistrement ID, appuyer sur le bouton [OUI]. Pour arrter lenregistrement ID, appuyer sur le bouton [NON]. pp Le mode denregistrement ID sactive lorsque lon appuie sur le bouton [OUI]. Le numro du casque dcoute tout-en-un ou du module de commande pour ceinture enregistr saffiche. 76 WX-CC411A_PGQX2068ZA_IG_fr.indd 76 2016/05/20 14:12:12 Important pp Lorsque lon enregistre lID de plusieurs casques dcoute tout-en-un ou modules de commande pour ceinture, enregistrer lID sur un appareil la fois. Si lon essaie denregistrer lID de plusieurs appareils la fois, les ID risquent de ne pas tre enregistrs correctement. pp Pendant lenregistrement ID, ne pas teindre les casques dcoute tout-en-un ou les modules de commande pour ceinture, et ne pas retirer leurs batteries. Autrement les ID risquent de ne pas tre enregistrs correctement. Si lenregistrement ne se droule pas bien, appuyer sur le bouton [Arrter] sur le module central, quitter le mode denregistrement ID, puis ressayer. pp Si lenregistrement ID choue, le casque dcoute tout-en-un ou le module de commande pour ceinture en question met des sons davertissement (BII-II-

IIP), puis le message vocal Lopration a chou est mis. Si un enregistrement ID choue, lID du casque dcoute tout-en-un ou du module de commande pour ceinture ne sera pas enregistr dans le module central, et le tmoin dalimentation du casque dcoute tout-en-un ou du module de commande pour ceinture clignotera en rouge. pp Jusqu 32 ID de casque dcoute tout-en-un ou module de commande pour ceinture peuvent tre enregistrs sur un module central. Si lon essaie denregistrer plus de 32 ID dappareil, les ID des casques dcoute rests inutiliss le plus longtemps seront automatiquement supprims et remplacs par ceux des nouveaux appareils. pp Il nest pas possible denregistrer lID dun rpteur sans fil pendant que le mode denregistrement ID des casques dcoute tout-en-un ou modules de commande pour ceinture est activ. WX-CC411_PGQX2068ZA_IG.indb 77 2016/05/18 13:31:10 77 Franais Procdures dutilisation pwFonctions pratiques (Autres fonctions) Verrouillage automatique pour parler aux clients Cette fonction permet au casque dcoute tout-en-un ou au module de commande pour ceinture dun membre prdfini du personnel du magasin de passer automatiquement en mode de voix lorsquun client approche de la borne de commande. (Mode de verrouillage pour parler aux clients) Pour plus de dtails sur la faon de paramtrer le mode de verrouillage automatique pour parler aux clients, se reporter au Manuel dutilisation du module de commande pour ceinture (WX-CT420) ou du casque dcoute tout-en-un

(WX-CH450). Mode de grant Un des casques dcoute tout-en-un ou modules de commande pour ceinture dune alle peut tre paramtr sur le mode de grant. Le casque dcoute tout-en-un ou le module de commande pour ceinture en mode de grant a une priorit plus leve, et il peut monopoliser un des quatre canaux de communication. Cela signifie que le grant peut utiliser le mode de voix ou dintercommunication en tout temps. Pour plus de dtails sur la faon de paramtrer le mode de grant, se reporter au Manuel dutilisation du module de commande pour ceinture (WX-CT420) ou du casque dcoute tout-en-un (WX-CH450). quipe express Opration quipe express dsigne un mode dopration o, lorsque lachalandage des vhicules dpasse la capacit des alles, le fonctionnement normal est interrompu, les dtecteurs de vhicule sont ferms et les membres du personnel du magasin se rendent en personne aux vhicules des clients pour prendre les commandes. 1 Appuyer sur

(bouton Opration express) sur le panneau tactile, puis sur le bouton

[Communs]. 2 Appuyer sur le bouton [OUI] d[quipe express] pour activer lopration quipe express. pp Le message vocal Le mode QUIPE EXPRESS est activ est mis par les couteurs de tous les casques dcoute tout-en-un ou modules de commande pour ceinture. Remarque pp En mode quipe express, le message Le mode QUIPE EXPRESS est activ sera mis toutes les 5 minutes par les couteurs des casques dcoute tout-

en-un ou modules de commande pour ceinture. 3 Lorsque lon appuie sur le bouton [P] du casque dcoute tout-en-un ou du module de commande pour ceinture, la conversation devient possible en mode de verrouillage dintercommunication. pp Mme si le bouton [P] est paramtr sur Appuyer pour intercommunication, il fonctionnera quand mme en verrouillage dintercommunication. pp Pour plus de dtails sur les mthodes dintercommunication, se reporter au Manuel dutilisation du module de commande pour ceinture

(WX-CT420) ou du casque dcoute tout-en-un

(WX-CH450). 78 WX-CC411_PGQX2068ZA_IG.indb 78 2016/05/18 13:31:10 4 Pour annuler lopration quipe express, appuyer sur le bouton [NON] d[quipe express] sur lcran de ltape 2. pp Le message vocal Le mode QUIPE EXPRESS est dsactiv est mis par les couteurs de tous les casques dcoute tout-en-un ou modules de commande pour ceinture, et le fonctionnement normal est rtabli. Remarque pp En mode quipe express, il nest pas possible de parler aux clients des autres bornes de commande. pp Si lon essaie de parler depuis un casque dcoute tout-en-un ou un module de commande pour ceinture, le message vocal Cette opration nest pas autorise est mis par lcouteur. Bip trans-alle (uniquement avec le WX-CC412A) Bip trans-alle est une fonction qui permet dmettre une tonalit par les casques dcoute tout-en-un ou modules de commande pour ceinture lorsquun client approche de la borne de commande de lautre alle. 1 Appuyer sur

(bouton Opration express) sur le panneau tactile, puis sur le bouton

[Communs]. 2 Appuyer sur le bouton [OUI] de [Bip trans-

alle] pour activer le fonctionnement du Bip trans-alle. pp Pour annuler Bip trans-alle, appuyer sur le bouton

[NON]. NON :

Si lalle A a t slectionne, la tonalit A sera mise lorsquun vhicule est dtect sur lalle A. La tonalit B ne sera toutefois pas mise mme si un vhicule a t dtect sur lalle B. OUI :

Si lalle A a t slectionne, la tonalit A sera mise lorsquun vhicule est dtect sur lalle A. De plus, la tonalit B est mise un niveau de volume bas mme lorsquun vhicule a t dtect sur lalle B. Si des vhicules ont t dtects sur les deux alles, les tonalits A et B seront mises alternativement un niveau de volume bas. Bip trans-

alle NON OUI Dtecteur de vhicule Lalle A est activ Lalle B est activ Casque dcoute tout-en-un ou module de commande pour ceinture Bip A A B Bip A Bip A Bip bas niveau B Bip B Bip A +

Bip bas niveau B Bip B Bip B Bip bas niveau A Bip B +

Bip bas niveau A WX-CC411_PGQX2068ZA_IG.indb 79 2016/05/18 13:31:11 79 Franais Procdures dutilisation Dtect./V. dsactiv Dtect./V. dsactiv est une fonction qui sert paramtrer les dtecteurs de vhicule virtuellement sur OUI et maintenir le microphone et le haut-parleur de la borne de commande sur le paramtre OUI. Annulation du mode de voix ou dintercommunication Cela force lannulation de ltat de voix (ou dintercommunication) dun casque dcoute tout-en-un ou dun module de commande pour ceinture. 1 Appuyer sur

(bouton Opration express) 1 Appuyer sur sur le panneau tactile, puis sur le bouton

[Alle A/B]*.

* Bouton [Alle B] napparat quavec le WX-CC412A.

(bouton Opration express) sur le panneau tactile, puis sur le bouton

[Alle A/B]*.

* Bouton [Alle B] napparat quavec le WX-CC412A. 2 Appuyer sur le bouton [OUI] de [Dtect./V. dsactiv] pour activer cette fonction. 2 Appuyer sur le bouton [Excuter] pour

[Libration VOIX/INTERCOM.]. pp Pour annuler Dtect./V. dsactiv, appuyer sur le bouton [NON]. pp Cela force la fin de la communication. Remarque pp Cela nannule pas ltat de voix (ou dintercommunication) du casque dcoute tout-en-un ou du module de commande pour ceinture en mode de grant. NON :

Lorsque le dtecteur de vhicule dtecte un vhicule la borne de commande, une tonalit est mise par lcouteur. Lorsque lon appuie sur le bouton de mode de voix dun casque dcoute tout-en-un ou dun module de commande pour ceinture, le haut-parleur et le microphone de la borne de commande sactivent. Lorsque le vhicule quitte lalle, la dtection de vhicule se dsactive. Il est alors possible dtablir le paramtre NON et le mode de verrouillage automatique pour parler aux clients. OUI :

Lorsque [Dtect./V. dsactiv] est paramtr sur OUI, cela active en permanence le microphone de la borne de commande, et la conversation est possible mme si le dtecteur de vhicule nest pas sur OUI. (Il est possible de forcer lmission de la voix capte par le microphone de la borne de commande.) Remarque pp Lorsque le mode quipe express est activ, le paramtre de Dtect./V. dsactiv permute automatiquement sur NON. pp En mode quipe express, il nest pas possible de modifier le paramtre de Dtect./V. dsactiv. 80 WX-CC411_PGQX2068ZA_IG.indb 80 2016/05/18 13:31:12 Dpannage Avant de faire une demande de rparation, vrifier les points suivants. Consulter le revendeur si ces mesures ne rglent pas le problme, si des symptmes non mentionns se produisent, ou pour toute question dingnierie. Symptme Origine/Solution Aucune communication nest possible entre la borne de commande, les modules de commande pour ceinture et les casques dcoute tout-en-un. Lintercommunication entre les membres du personnel du magasin est possible, mais il nest pas possible de parler aux clients la borne de commande. pp Le cordon dalimentation est-il branch fond dans la prise dentre C.A. de lappareil et dans la prise de courant ?

Vrifier les connexions. pp Lentre de microphone et la sortie de haut-parleur de la borne de commande sont-elles bien connectes ?

Vrifier les connexions. Pages de rfrence P.68 P.69 Il y a de lcho dans lcouteur du casque dcoute lorsque lon parle dans le microphone du casque dcoute. Le poste de commande met beaucoup de bruit. Les touches ne ragissent pas lorsque lon appuie dessus sur le panneau tactile. Lorsque lon appuie sur un des boutons du panneau tactile, cest un autre bouton qui ragit. La communication est coupe ou la voix est difficilement audible. La communication avec les camras nest pas possible. Rien ne se passe mme si les commandes sont effectues correctement, ou bien les commandes sont mal interprtes. pp Le haut-parleur et le microphone de la borne de commande ne sont peut-tre pas bien installs. Vrifier si le haut-parleur et le microphone sont placs une distance suffisante lun de lautre, et les fixer solidement pour que toutes les vibrations soient absorbes. pp Les niveaux audio dentre et de sortie sont peut-tre paramtrs sur des valeurs trop leves. Abaisser les niveaux dentre et de sortie audio (OUT MIC/OUT SP) de la borne de commande jusquaux valeurs appropries.

(Le bruit de raction acoustique peut tre vit en slectionnant un paramtre qui abaisse le niveau dentre audio.) Manuel dutilisation WX-CS560 Manuel dutilisation

pp Lliminateur dcho est dsactiv, ou son niveau est bas. Paramtrer lliminateur dcho sur le niveau appropri.

(Le paramtre par dfaut est MOYEN.) Manuel dutilisation

pp La fonction de rduction numrique du bruit est paramtre sur NON ou sur un niveau bas. Paramtrer la fonction de rduction numrique du bruit sur le niveau appropri.

(Le paramtre par dfaut est MOYEN.) Manuel dutilisation

pp Le panneau tactile est-il sale ?

Nettoyer le panneau tactile. Sil ny a pas damlioration aprs le P.54 nettoyage, ajuster le panneau tactile. pp Le panneau tactile doit tre ajust. Ajuster le panneau tactile. pp Les casques dcoute tout-en-un ou les modules de commande pour ceinture sont-ils trop loigns du module central, ou y a-t-il des obstacles tels que murs de bton ou objets mtalliques entre le module central et les casques dcoute tout-en-un ou les modules de commande pour ceinture ?

Contacter le magasin o lappareil a t achet, ou dplacer lappareil dans un emplacement o rien ne fera obstacle autour de lui. pp Les camras ont-elles t enregistres sur le module central ?

Aucune communication avec les camras nest possible si elles nont pas t enregistres. Enregistrer les camras connecter. pp Il se peut que le fonctionnement de lappareil soit dfectueux. Appuyer sur la touche de rinitialisation sur le panneau latral de lappareil, laide dun objet pointe fine. (Les paramtres, etc. ne seront pas effacs.) Manuel dutilisation

Manuel dutilisation

P.57 81 WX-CC411_PGQX2068ZA_IG.indb 81 2016/05/18 13:31:12 Franais Caractristiques techniques Gnralits Frquence de fonctionnement POWER Source dalimentation Connecteur Puissance consomme Tempratures de fonctionnement Plage dhumidit en fonctionnement 1921,536 MHz 1928,448 MHz AC 100 V 120 V 50 Hz/60 Hz Type universel avec prise dentre CA 3 broches 17 W 10 C +50 C {14 F 122 F}

20 % 90 % (sans condensation) 375 mm (L) 275 mm (H) 50 mm (P)

{14-49/64 po (L) 10-53/64 po (H) 1-31/32 po (P)}

Environ 1,9 kg {4,2 lbs} (Sans le support de montage mural) Dimensions Masse Interface utilisateur Affichage ACL cran tactile Interface audio et vido Gnralits OUT MIC OUT SP AUX MIC AUX SP 82 Type Pixels effectifs Rtroclairage Type Technologie Type 7 WVGA: 800 (H) 480 (V) DEL Type 7,8 Type rsistif Nombre de canaux Caractristique de frquence Technologie Connecteur Impdance dentre Entre nominale Entre maximale Technologie Connecteur Sortie nominale pour amplificateur Impdance de charge conforme Technologie Connecteur Impdance dentre Entre nominale Entre maximale Signal de commande Technologie Connecteur Sortie nominale pour amplificateur Impdance de charge conforme 1 (WX-CC411A) 2 (WX-CC412A) 300 Hz 3 kHz quilibre lectrique Connecteur Euroblock (HOT/COLD/GND) 1,5 k 70 dBV 38 dBV quilibre Connecteur Euroblock 2 W 8 quilibre lectrique Connecteur Euroblock (HOT/COLD/GND/PTT/COM) 3 k 67 dBV 44 dBV PTT, contact (sans tension) activ par la parole quilibre Connecteur Euroblock 2 W 8 WX-CC411_PGQX2068ZA_IG.indb 82 2016/05/18 13:31:12 LINE IN LINE OUT Technologie Connecteur Entre nominale Entre maximale Technologie Connecteur Sortie nominale Sortie maximale Dissymtrique, monaural Connecteur Euroblock 10 dBV

+6 dBV Dissymtrique, monaural Connecteur Euroblock 14 dBV

+6 dBV Interface de lappareil AUX MIC CNT, COM

(ENTRE) VDET CNT, COM

(ENTRE) ALERT CNT, COM

(ENTRE) DEVICE CNT, COM

(SORTIE) RS-232C TxD, RxD, SG Nombre de canaux Technologie Tension de circuit ouvert Courant de court-circuit Connecteur Nombre de canaux Technologie Tension de circuit ouvert Courant de court-circuit Connecteur Nombre de canaux Technologie Tension de circuit ouvert Courant de court-circuit Connecteur Nombre de canaux Technologie Tension de commande Courant de commande Connecteur Systme de communication Dbit en bauds Carte SD Carte prise en charge 10BASE-T, 100BASE-TX

(Rseau) Type Connecteur Protocoles pris en charge VIDEO OUT Type Signaux de sortie Connecteur 1 (WX-CC411A) 2 (WX-CC412A) Photocoupleur 5 V 2 mA Connecteur Euroblock 2 (WX-CC411A) 4 (WX-CC412A) Photocoupleur 5 V 2 mA Connecteur Euroblock 4 Photocoupleur 5 V 2 mA Connecteur Euroblock 1 Photocoupleur CC 30 V 50 mA MAX Connecteur Euroblock Asynchrone (duplex intgral) 19 200 bps Carte SD, carte SDHC Remarque : les mini-cartes SD et les cartes micro-SD ne sont pas utilisables. 10/100BASE-TX (Duplex intgral/Semi duplex, Automatique/

Manuel) RJ-45 IPv4 : TCP/IP, HTTP, HTTPS, DHCP, DNS, SMTP, NTP, UPnP, POP NTSC Composite Prise RCA 83 WX-CC411_PGQX2068ZA_IG.indb 83 2016/05/18 13:31:12 Franais Panasonic System Networks Co., Ltd. 2016 Fs0616-0 PGQX2068ZA Printed in China WX-CC411_PGQX2068ZA_IG.indb 84 2016/05/18 13:31:12

		frequency	equipment class	purpose
1	2016-07-19	1921.536 ~ 1928.448	PUB - Part 15 Unlicensed PCS Base Station	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2016-07-19
1	Applicant's complete, legal business name	Panasonic Corporation of North America
1	FCC Registration Number (FRN)	0003762242
1	Physical Address	Two Riverfront Plaza, 9th Floor
1		Newark, NJ
1		United States

app s	TCB Information
1	TCB Application Email Address	S******@nemko.com
1	TCB Scope	A3: Unlicensed Personal Communication System (PCS) devices

app s	FCC ID
1	Grantee Code	ACJ
1	Equipment Product Code	9TAWX-CC411A

app s	Person at the applicant's address to receive grant or for contact
1	Name	B** B**
1	Title	Project Manager
1	Telephone Number	201-3********
1	Fax Number	201-3********
1	E-mail	B******@us.panasonic.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	09/02/2016
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	PUB - Part 15 Unlicensed PCS Base Station
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	DECT 6.0 Center Module (with 1 Wireless modules)
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	Nemko AS
1	Name	F****** S******
1	Telephone Number	47-22********
1	Fax Number	47-22********
1	E-mail	f******@nemko.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15D		1921.53600000	1928.44800000	0.0760000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: ZZ2-P402W Amcrest Technologies LLC 2AFXXGG-VMS M&S Accessory Network HLZA24006 Acer Incorporated HLZA24008 Acer Incorporated 2ADYY-T1001W TECNO MOBILE LIMITED