FCC ID: ACJ9TGWL12A Intel Centrino Advanced-N 6235

by: Panasonic Corporation of North America latest update: 2016-06-24 model: 9TGWL12A

Twenty grants have been issued under this FCC ID from 05/09/2012 to 06/24/2016 (this is one of ninety-six releases in 2016 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked troubleshooting guides, password defaults, warrantee terms, instructions, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various (Short term confidential) User Manual 0609 Users Manual pdf 46.98 KiB / September 08 2016
various Manual Users Manual pdf 2.64 MiB May 08 2013
various User Manual Users Manual pdf 548.82 KiB June 09 2013
various User Manual Cladle Users Manual pdf 334.17 KiB June 09 2013
various User manual (host) Users Manual pdf 916.50 KiB March 02 2013
various User manual CF-C2 Users Manual pdf 4.08 MiB / October 12 2012
various User manual WLAN Users Manual pdf 128.16 KiB / October 12 2012
various WWAN/WLAN instructions Users Manual pdf 311.74 KiB March 02 2013
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Test Setup Photos pdf / September 08 2016
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Test Report pdf
various RF Exposure Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various Cover Letter(s) pdf June 09 2013
various Cover Letter(s) pdf June 09 2013
various Cover Letter(s) pdf June 09 2013
various External Photos pdf June 09 2013
various ID Label/Location Info pdf June 09 2013
various ID Label/Location Info pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various Test Setup Photos pdf June 09 2013
various Internal Photos pdf June 09 2013
various External Photos pdf June 09 2013
various RF Exposure Info pdf June 09 2013
various Cover Letter(s) pdf May 08 2013
various Cover Letter(s) pdf May 08 2013
various RF Exposure Info pdf May 08 2013
various RF Exposure Info pdf May 08 2013
various RF Exposure Info pdf May 08 2013
various RF Exposure Info pdf May 08 2013
various External Photos pdf May 08 2013
various ID Label/Location Info pdf May 08 2013
various RF Exposure Info pdf May 08 2013
various Test Setup Photos pdf May 08 2013
various RF Exposure Info pdf May 08 2013
various External Photos pdf May 08 2013
various ID Label/Location Info pdf May 08 2013
various Cover Letter(s) pdf March 02 2013 / April 03 2013
various Cover Letter(s) pdf March 02 2013 / April 03 2013
various Cover Letter(s) pdf March 02 2013 / April 03 2013
various Cover Letter(s) pdf March 02 2013 / April 03 2013
various ID Label/Location Info pdf March 02 2013 / April 03 2013
various External Photos pdf March 02 2013
various RF Exposure Info pdf February 03 2013 / April 03 2013
various RF Exposure Info pdf February 03 2013 / April 03 2013
various RF Exposure Info pdf February 03 2013 / April 03 2013
various RF Exposure Info pdf February 03 2013 / April 03 2013
various RF Exposure Info pdf February 03 2013 / April 03 2013
various RF Exposure Info pdf March 03 2013 / April 03 2013
various Test Setup Photos pdf February 03 2013
various RF Exposure Info pdf February 03 2013 / April 03 2013
various RF Exposure Info pdf / April 03 2013
various RF Exposure Info pdf / April 03 2013
various RF Exposure Info pdf / April 03 2013
various RF Exposure Info pdf / April 03 2013
various RF Exposure Info pdf / April 03 2013
various RF Exposure Info pdf / April 03 2013
various RF Exposure Info pdf / April 03 2013
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Internal Photos pdf / October 12 2012
various ID Label/Location Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf / October 12 2012
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf September 06 2012
various Cover Letter(s) pdf September 06 2012
various RF Exposure Info pdf September 06 2012
various External Photos pdf September 06 2012
various ID Label/Location Info pdf September 06 2012
various Test Report pdf September 06 2012
various Cover Letter(s) pdf September 05 2012
various Cover Letter(s) pdf September 05 2012
various ID Label/Location Info pdf September 05 2012
various Cover Letter(s) pdf September 05 2012
various (Short term confidential) User Manual 0609 Users Manual pdf 46.98 KiB / September 08 2016
various Manual Users Manual pdf 2.64 MiB May 08 2013
various User Manual Users Manual pdf 548.82 KiB June 09 2013
various User Manual Cladle Users Manual pdf 334.17 KiB June 09 2013
various User manual (host) Users Manual pdf 916.50 KiB March 02 2013
various User manual CF-C2 Users Manual pdf 4.08 MiB / October 12 2012
various User manual WLAN Users Manual pdf 128.16 KiB / October 12 2012
various WWAN/WLAN instructions Users Manual pdf 311.74 KiB March 02 2013

frequency equipment class purpose
1 2016-06-24 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
3 2013-09-06 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
4 5755 ~ 5795 DTS - Digital Transmission System
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 2013-08-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 5755 ~ 5795 DTS - Digital Transmission System
8 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
9 2013-03-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
11 5755 ~ 5795 DTS - Digital Transmission System
12 2012-10-26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5755 ~ 5795 DTS - Digital Transmission System
14 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
15 2012-06-09 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
16 5755 ~ 5795 DTS - Digital Transmission System
17 2012-05-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in identification of presently authorized equipment. Original FCC ID: PD96235ANH Grant Date: 10/11/2011
18 5755 ~ 5795 DTS - Digital Transmission System
19 JBP - Part 15 Class B Computing Device Peripheral
20 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2016-06-24
various 2013-09-06
various 2013-08-05
various 2013-03-04
various 2012-10-26
various 2012-06-09
various 2012-05-09
various Applicant's complete, legal business name Panasonic Corporation of North America
various FCC Registration Number (FRN) 0003762242
various Physical Address Two Riverfront Plaza, 9th Floor
various Newark, New Jersey 07102-5490
various United States
app s TCB Information
various TCB Application Email Address L******@ul.com
various c******@ccsemc.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code ACJ
various Equipment Product Code 9TGWL12A
app s Person at the applicant's address to receive grant or for contact
various Name B**** B********
various Title Project Manager
various Telephone Number 201-3********
various Fax Number 201-3********
various E-mail B******@us.panasonic.com
app s Technical Contact
various Firm Name UL Japan, Inc.
various UL CCS
various Name T****** H******
various C****** H****
various Physical Address 4383-326 Asama-cho, Ise-shi
various 47173 Benicia Street
various 4383-326 Asama-cho
various Mie-ken, 516-0021
various Fremont, 94538
various Mie-ken, 5160021
various Japan
various United States
various Telephone Number 81-59******** Extension:
various 81-59********
various (510)********
various 81-59********
various Fax Number 81-59********
various (510)********
various E-mail T******@ul.com
various c******@ul.com
app s Non Technical Contact
various Firm Name UL Japan, Inc.
various Name T****** H******
various Physical Address 4383-326 Asama-cho, Ise-shi
various Mie-ken, 516-0021
various Japan
various Telephone Number 81-59********
various Fax Number 81-59********
various E-mail T******@ul.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/09/2016
various10/21/2013
various09/19/2013
various04/18/2013
various12/10/2012
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Centrino Advanced-N 6235
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousLimited Single Modular Approval
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD96235ANH Grant Date: 10/11/2011
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change filing to allow continued installation of the module under new rules in portable host (Panasonic CF-19) as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR values for body and simultaneous transmission exposure conditions for the module installed in host module CF-19 are 0.66 W/kg and 0.66 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous transmission exposure conditions are 1.40 W/kg and 1.56 W/kg respectively.
variousClass II permissive change to add U-NII Band 3 under new rules. Output power listed is conducted. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met, installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured standalone SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR values across all filings under this FCC ID for standalone and simultaneous transmission exposure conditions are 1.40 W/kg and 1.56 W/kg respectively.
variousClass II permissive change filing adds a new portable host (Panasonic UT-MB5000) as documented in this filing. Maximum output power is reduced when installed in this host. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR values for body and simultaneous transmission exposure conditions for this filing are 1.27 W/kg and 1.56 W/kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.40 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic UT-MB5000) as documented in this filing. Maximum output power is reduced when installed in this host. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR value for body and simultaneous transmission exposure conditions in this filing are 1.03 W/kg and 1.56 W/Kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.41 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic UT-MB5000) as documented in this filing. Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousClass II permissive change filing adds a new portable host (Panasonic CF-19) as documented in this filing. Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousClass II permissive change filing adds a new portable host (Panasonic CF-19) as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR value for body and simultaneous transmission exposure conditions in this filing are 0.39 W/kg and 0.39 W/Kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.41 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic CF-19) as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR values for body and simultaneous transmission exposure conditions for this filing are 0.66 W/kg and 0.66 W/kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.40 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic FZ-G1) as documented in this filing. Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value for body and simultaneous transmission exposure conditions in this filing are <0.1 W/kg and 1.20 W/Kg respectively.
variousClass II permissive change filing adds a new portable host (Panasonic FZ-G1) as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR values for body and simultaneous transmission exposure conditions for this filing are 1.19 W/kg and 1.31 W/kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.40 W/Kg.
variousClass II permissive change filing adds a new portable host (Panasonic FZ-G1) as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR value for body and simultaneous transmission exposure conditions in this filing are 1.09 W/kg and 1.22 W/Kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.41 W/Kg.
variousClass II permissive change filing adds a new host as documented in this filing. Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousClass II permissive change filing adds a new host as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR value for this filing is 1.41 W/kg.
variousClass II permissive change filing adds a new host as documented in this filing. Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg. The highest reported SAR value for this filing is 1.40 W/kg.
variousPower Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg.
variousPower Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg.
variousPower Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousPower Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg.
variousPower Output listed is conducted. Limited Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.39 W/kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name UL Japan, Inc. Head office EMC Lab.
various UL Japan, Inc.
various Compliance Certification Services
various Elliott Laboratories LLC
various Name T****** H********
various M******** F****
various T****** C******
various D******** B********
various Telephone Number +81-5********
various 81-59********
various 510-7********
various 408-2********
various Fax Number +81-5********
various 81-59********
various 510-6********
various 408-2********
various E-mail T******@jp.ul.com
various m******@jp.ul.com
various t******@ccsemc.com
various d******@elliottlabs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.045
1 2 15E 38 CC MO 5190 5230 0.044
1 3 15E 38 CC MO ND 5260 5320 0.046
1 4 15E 38 CC MO ND 5270 5310 0.04
1 5 15E 38 CC MO ND 5500 5700 0.045
1 6 15E 38 CC MO ND 5510 5670 0.044
1 7 15E 49 CC MO 5745 5825 0.032
1 8 15E 49 CC MO 5755 5795 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.045
2 2 15E 38 CC MO 5190 5230 0.044
2 3 15E 38 CC MO ND 5260 5320 0.046
2 4 15E 38 CC MO ND 5270 5310 0.04
2 5 15E 38 CC MO ND 5500 5700 0.045
2 6 15E 38 CC MO ND 5510 5670 0.044
2 7 15E 49 CC MO 5745 5825 0.032
2 8 15E 49 CC MO 5755 5795 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.045
3 2 15E CC MO 5190 5230 0.044
3 3 15E CC MO ND 5260 5320 0.046
3 4 15E CC MO ND 5270 5310 0.04
3 5 15E CC MO ND 5500 5700 0.045
3 6 15E CC MO ND 5510 5670 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC MO 2412 2462 0.049
4 2 15C CC MO 2422 2452 0.017
4 3 15C CC MO 5745 5825 0.04
4 4 15C CC MO 5755 5795 0.102
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC MO 2412 2462 0.049
7 2 15C CC MO 2422 2452 0.017
7 3 15C CC MO 5745 5825 0.04
7 4 15C CC MO 5755 5795 0.102
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.045
8 2 15E CC MO 5190 5230 0.044
8 3 15E CC MO ND 5260 5320 0.046
8 4 15E CC MO ND 5270 5310 0.04
8 5 15E CC MO ND 5500 5700 0.045
8 6 15E CC MO ND 5510 5670 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.045
10 2 15E CC MO 5190 5230 0.044
10 3 15E CC MO 5260 5320 0.046
10 4 15E CC MO 5270 5310 0.04
10 5 15E CC MO 5500 5700 0.045
10 6 15E CC MO 5510 5670 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC MO 2412 2462 0.049
11 2 15C CC MO 2422 2452 0.017
11 3 15C CC MO 5745 5825 0.04
11 4 15C CC MO 5755 5795 0.102
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC MO 2412 2462 0.049
13 2 15C CC MO 2422 2452 0.017
13 3 15C CC MO 5745 5825 0.04
13 4 15C CC MO 5755 5795 0.102
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.045
14 2 15E CC MO 5190 5230 0.044
14 3 15E CC MO ND 5260 5320 0.046
14 4 15E CC MO ND 5270 5310 0.04
14 5 15E CC MO ND 5500 5700 0.045
14 6 15E CC MO ND 5510 5670 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC MO 5180 5240 0.045
15 2 15E CC MO 5190 5230 0.044
15 3 15E CC MO ND 5260 5320 0.046
15 4 15E CC MO ND 5270 5310 0.04
15 5 15E CC MO ND 5500 5700 0.045
15 6 15E CC MO ND 5510 5670 0.044
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC MO 2412 2462 0.049
16 2 15C CC MO 2422 2452 0.017
16 3 15C CC MO 5745 5825 0.04
16 4 15C CC MO 5755 5795 0.102
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC MO 2412 2462 0.049
18 2 15C CC MO 2422 2452 0.017
18 3 15C CC MO 5745 5825 0.04
18 4 15C CC MO 5755 5795 0.102
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.045
20 2 15E CC MO 5190 5230 0.044
20 3 15E CC MO ND 5260 5320 0.046
20 4 15E CC MO ND 5270 5310 0.04
20 5 15E CC MO ND 5500 5700 0.045
20 6 15E CC MO ND 5510 5670 0.044

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC