app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2019-07-04
|
1 2 3 4 5 6
|
2019-06-21
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Panasonic Corporation of North America
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0003762242
|
1 2 3 4 5 6
|
Physical Address |
Two Riverfront Plaza, 9th Floor
|
1 2 3 4 5 6
|
Newark, New Jersey 07102-5490
|
1 2 3 4 5 6
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
t******@siemic.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
ACJ
|
1 2 3 4 5 6
|
Equipment Product Code |
9TGWL19A
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
B****** B****
|
1 2 3 4 5 6
|
Title |
Project Manager
|
1 2 3 4 5 6
|
Telephone Number |
201-3********
|
1 2 3 4 5 6
|
Fax Number |
201-3********
|
1 2 3 4 5 6
|
E-mail |
B******@us.panasonic.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/01/2020 |
1 2 3 4 5 6 | 12/19/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 9560 |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 | Change in identification of presently authorized equipment. Original FCC ID: PD99560D2 Grant Date: 09/11/2018 |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | This C2PC is to add personal computer of model CF-SV. SAR test is exclusion because the antenna is integrated in the screen-side and ordinarily remains 200 mm from the body.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance
with FCC multi-transmitter product procedures. Grantee must provide installation and
operating instructions for complying with FCC multitransmitter product procedures. This
module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Grantee must coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for
either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR
values are 0.43W/kg and 1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to
establish minimum 5mm antenna to user separation distance at a maximum SAR value
<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF
Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from |
1 2 3 4 5 6 | This C2PC is to add personal computer of model CF-SV. SAR test is exclusion because the antenna is integrated in the screen-side and ordinarily remains 200 mm from the body.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance
with FCC multi-transmitter product procedures. Grantee must provide installation and
operating instructions for complying with FCC multitransmitter product procedures. This
module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Grantee must coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth
modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible
for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are
0.69W/kg and 1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to
establish minimum 5mm antenna to user separation distance at a maximum SAR value
<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF
Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing was
performed to demonstrate RF compliance. |
1 2 3 4 5 6 | This C2PC is to add personal computer of model CF-SV. SAR test is exclusion because the antenna is integrated in the screen-side and ordinarily remains 200 mm from the body.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures. Grantee must provide installation
and operating instructions for complying with FCC multi-transmitter product procedures. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. End-users and installers must be provided with transmitter
operating conditions for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.13W/kg and 1.29W/kg respectively. This change is to
establish conditions based on modular stand-alone SAR evaluation to establish minimum
5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed
mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance
v05 and KDB 616217 D04 for Laptop and Tablets v01. Antenna is of the same type and lower
gain from original approval. SAR testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee
must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as
described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this
filing. OEM/Host integrator must be provided with antenna installation instructions
and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product.
The highest reported Body and Simultaneous SAR values are 0.69W/kg and
1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR
evaluation to establish minimum 5mm antenna to user separation distance at a
maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions
according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB
616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing
was performed to demonstrate RF compliance. |
1 2 3 4 5 6 | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee
must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing.
OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product.
The highest reported Body and Simultaneous SAR values are 0.43W/kg and
1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR
evaluation to establish minimum 5mm antenna to user separation distance at a
maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions
according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB
616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing
was performed to demonstrate RF compliance. |
1 2 3 4 5 6 | Power Output listed is conducted. Modular Approval filing. The antenna(s) used
for this transmitter must not transmit simultaneously with any other antenna or
transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with
FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.13W/kg and 1.29W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR
evaluation to establish minimum 5mm antenna to user separation distance at a
maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions
according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB
616217 D04 for Laptop and Tablets v01.
Antenna is of the same type and lower gain from original approval. SAR testing
was performed to demonstrate RF compliance. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
1 2 3 4 5 6
|
Intel Corporation S.A.S.
|
1 2 3 4 5 6
|
Name |
E******** L******
|
1 2 3 4 5 6
|
N******** A********
|
1 2 3 4 5 6
|
Telephone Number |
+886-********
|
1 2 3 4 5 6
|
00334********
|
1 2 3 4 5 6
|
Fax Number |
+886-********
|
1 2 3 4 5 6
|
00334********
|
1 2 3 4 5 6
|
E-mail |
e******@tw.bureauveritas.com
|
1 2 3 4 5 6
|
n******@intel.com
|
|